//! Booleans of bodies with faces in a common plane. Every expected volume is what the two bodies //! define. #![allow(clippy::unwrap_used, clippy::panic)] use crate::*; use solidcore_record::Vec3; /// An l x w x h block with two bottom edges chamfered by 1 mm: no prism along any axis, so /// its booleans are not done on sections. fn block(l: f64, w: f64, h: f64) -> Body { let b = box_solid(Vec3::ZERO, Vec3::new(l, w, h)).unwrap(); let b = chamfer(&b, &[Vec3::new(l / 2.0, w, 0.0)], 1.0).unwrap(); chamfer(&b, &[Vec3::new(l, w / 2.0, 0.0)], 1.0).unwrap() } /// A 200 x 100 x 20 block with a rib across it: 20 wide over the block's 100, from the top /// face z = 20 up to z = 30. fn ribbed() -> Body { let rib = box_solid(Vec3::new(90.0, 0.0, 20.0), Vec3::new(110.0, 100.0, 30.0)).unwrap(); boolean(&block(200.0, 100.0, 20.0), &rib, BoolOp::Union).unwrap().unwrap() } /// A channel along that block, longer than its 200: y 30 to 70 and z 10 to 20, so its top /// lies in the plane of the face the rib stands on. fn channel() -> Body { box_solid(Vec3::new(-20.0, 30.0, 10.0), Vec3::new(220.0, 70.0, 20.0)).unwrap() } /// What the boolean of `a` and `b` adds to a's volume, and the result's lumps. fn change(a: &Body, b: &Body, op: BoolOp) -> (f64, usize) { let r = boolean(a, b, op).unwrap().unwrap(); (measure(&r).unwrap().volume - measure(a).unwrap().volume, r.lumps().unwrap().len()) } /// A channel cut along a block, up to the face a rib stands on. The channel's top lies in /// that face's plane and the rib bridges it. #[test] fn a_cut_up_to_a_face_leaves_what_stands_on_the_face() { let (added, lumps) = change(&ribbed(), &channel(), BoolOp::Cut); // It takes 200 x 40 x 10 of the block and nothing of the rib. assert!((added + 80_000.0).abs() < 1e-6 && lumps == 1, "{added}, {lumps} lumps"); } /// The same with a round hole through the block beside the channel (r 4 at 30, 15: y 11 to /// 19, the channel from 30 on). The body no longer has planar faces only, but the hole lies /// clear of the tool, and the cut stays what the channel is. #[test] fn a_round_hole_beside_the_cut_changes_nothing() { let hole = cylinder(Vec3::new(30.0, 15.0, -1.0), Vec3::Z, 4.0, 22.0).unwrap(); let drilled = boolean(&ribbed(), &hole, BoolOp::Cut).unwrap().unwrap(); let (added, lumps) = change(&drilled, &channel(), BoolOp::Cut); // 200 x 40 x 10 again (the hole is measured on its mesh, before and after). assert!((added + 80_000.0).abs() < 1e-3 && lumps == 1, "{added}, {lumps} lumps"); } /// A pocket whose top lies in the plane of the block's top face, and a pad whose foot does. #[test] fn faces_in_a_common_plane_cut_and_join() { let block = block(200.0, 100.0, 20.0); // A pocket 50 x 60 x 5 from the top face: 15 000 less. let pocket = box_solid(Vec3::new(75.0, 20.0, 15.0), Vec3::new(125.0, 80.0, 20.0)).unwrap(); let (added, _) = change(&block, &pocket, BoolOp::Cut); assert!((added + 15_000.0).abs() < 1e-6, "{added}"); // A pad 50 x 60 x 10 on the top face: 30 000 more. let pad = box_solid(Vec3::new(75.0, 20.0, 20.0), Vec3::new(125.0, 80.0, 30.0)).unwrap(); let (added, lumps) = change(&block, &pad, BoolOp::Union); assert!((added - 30_000.0).abs() < 1e-6 && lumps == 1, "{added}"); } /// A disc joined into a round hole it fills (issue: "boolean Union: no result" for a 1 mm /// floor extruded into a through hole of a part that isn't a prism). The disc's wall lies on /// the hole's, and at either end its face lies in the block's bottom or top face: it adds its /// own volume, the block stays one piece, and the hole is closed where the disc is. #[test] fn a_disc_joined_into_the_hole_it_fills() { let hole = cylinder(Vec3::new(150.0, 50.0, -1.0), Vec3::Z, 20.0, 22.0).unwrap(); let drilled = boolean(&block(200.0, 100.0, 20.0), &hole, BoolOp::Cut).unwrap().unwrap(); for (z0, z1) in [(0.0, 1.0), (5.0, 8.0), (19.0, 20.0)] { let disc = cylinder(Vec3::new(150.0, 50.0, z0), Vec3::Z, 20.0, z1 - z0).unwrap(); let want = measure(&disc).unwrap().volume; let r = boolean(&drilled, &disc, BoolOp::Union).unwrap().unwrap(); let added = measure(&r).unwrap().volume - measure(&drilled).unwrap().volume; assert!((added - want).abs() < want * 1e-3, "{z0}..{z1}: {added} vs {want}"); assert!(r.lumps().unwrap().len() == 1 && r.validity().is_empty(), "{z0}..{z1}: {:?}", r.validity()); } } /// A hemisphere of radius `r` standing on the plane z = 0. fn hemisphere(r: f64) -> Body { let ball = sphere(Vec3::ZERO, r).unwrap(); let below = box_solid(Vec3::new(-2.0 * r, -2.0 * r, -2.0 * r), Vec3::new(2.0 * r, 2.0 * r, 0.0)).unwrap(); boolean(&ball, &below, BoolOp::Cut).unwrap().unwrap() } /// A hemisphere (r 20) and a block (x 5 to 35, y -30 to 30, z 0 to 25) that both stand on z = 0, the block's foot over most of the /// hemisphere's flat face. The block takes the part of the dome beyond x = 5, half of a cap 15 high: the union is the dome and the /// block less that part. #[test] fn a_block_flush_with_the_flat_face_of_a_hemisphere_joins_exactly() { let (r, x0) = (20.0, 5.0); let block = box_solid(Vec3::new(x0, -30.0, 0.0), Vec3::new(35.0, 30.0, 25.0)).unwrap(); let dome = hemisphere(r); let h = r - x0; let expected = 2.0 / 3.0 * std::f64::consts::PI * r.powi(3) - std::f64::consts::PI * h * h * (3.0 * r - h) / 6.0 + 30.0 * 60.0 * 25.0; for (a, b) in [(&dome, &block), (&block, &dome)] { let joined = boolean(a, b, BoolOp::Union).unwrap().unwrap(); let v = measure(&joined).unwrap().volume; assert!((v - expected).abs() < expected * 1e-4, "{v} against {expected}"); assert_eq!(joined.lumps().unwrap().len(), 1); assert!(joined.validity().is_empty(), "{:?}", joined.validity()); // The flat faces are one plane again: nothing of the join stays below z = 0. let mesh = joined.mesh(&crate::MeshTolerance::chord(0.05)).unwrap(); let lowest = mesh.positions.iter().map(|p| p.z).fold(f64::MAX, f64::min); assert!(lowest > -1e-6, "the join reaches down to z = {lowest}"); } }