d381d2b7f3
kernel::sew builds an arc edge, and the wall an extruded arc sweeps, with truck's three-point arc (circumcentre, then a turn about it). On a very flat arc that construction ends off its own vertex: a 12 mm chord with a 0.08 um sagitta (a 225 m radius) ends about 1e-6 mm short of it, and the planar face holding the arc, 1238 mm from the origin, fails with "cannot attach a plane to a wire that is not on one plane". truck's plane fit takes the sum of the wire's control points as its centre, so a gap of that size is scaled by a distance of the order of the coordinates and tilts the estimated normal beyond the fit's 1e-6 flatness tolerance. Arcs whose sagitta is under 1% of the half chord are now built as their exact rational quadratic (apex 2/(1-t^2) along the bow, weight (1-t^2)/(1+t^2), t the sagitta over the half chord), for edges and for the extruded walls on them. Deeper arcs keep truck's construction. Co-authored-by: NOWN-DEV <257771410+NOWN-DEV@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>