5f8a58956f
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop. - 04135da96 Brennen Herbruck: kernel-cases: threads cases from modelled-thread reports (1 of 2) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
32 lines
1.4 KiB
JSON
32 lines
1.4 KiB
JSON
{
|
|
"sources": [
|
|
"tangency-labs/solidcraft#2209"
|
|
],
|
|
"what": "a fine modelled thread on a large shaft (M44x1 on a 44 mm shaft, 4 turns), which once cut about 9% too much",
|
|
"source": "analytic",
|
|
"method": "ISO 68-1 basic profile: H = P sqrt3/2, basic depth 5H/8. External groove (the space between teeth): a trapezoid P/4 wide at the root radius d/2 - 5H/8, widening by 2 tan30 per unit of radius to 7P/8 at d/2. Internal groove: P/8 wide at the major radius d/2, widening to 3P/4 at the minor radius, cut only where there is material (r >= hole radius). Pappus: volume per turn = 2 pi A rc (A the trapezoid area, rc its centroid radius from the axis); a helical sweep of L/P turns removes exactly (L/P) x that, where each end of the thread is a free end or lies inside material. Shaft R=22.0 L=4, M44x1 (P=1.0) over its whole length, both ends free: V = pi R^2 L - (L/P) V_turn = 6082.1234 - 4 x 41.66397 = 5915.4675 mm3. COM on the axis at L/2 (2): the groove is symmetric over whole turns. Tolerance 1%: a modelled thread is a faceted helical solid (radial chord error up to 1% of the pitch on every wall, i.e. a volume deficit of about 4/3 x sag/R).",
|
|
"outcome": "solid",
|
|
"body_count": 1,
|
|
"volume_mm3": 5915.4675,
|
|
"center_of_mass": [
|
|
0,
|
|
0,
|
|
2.0
|
|
],
|
|
"bbox": {
|
|
"min": [
|
|
-22.0,
|
|
-22.0,
|
|
0
|
|
],
|
|
"max": [
|
|
22.0,
|
|
22.0,
|
|
4
|
|
]
|
|
},
|
|
"tolerance": {
|
|
"rel": 0.01
|
|
}
|
|
}
|