Files
makeCAD/tests/kernel-cases/threads/4149-internal-thread-below-counterbore-filleted-rim/expected.json
T
bherbruck 924ed1b57d Wave 75/509: kernel-cases: tessellation cases from mesh-hole reports grade watertightness (and 3 more)
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 58ce14f45 bherbruck: kernel-cases: count ranges, a watertight mesh check, and per-case timeouts
- e809edd33 Brennen Herbruck: kernel-cases: thread cases that are slow by nature get 600 s
- 8cb976b9b bherbruck: kernel-cases: watertight checks the display mesh, welding vertices by distance
- 3feb9ba2c Brennen Herbruck: kernel-cases: tessellation cases from mesh-hole reports grade watertightness

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-21 07:31:04 -04:00

28 lines
1.8 KiB
JSON

{
"sources": [
"tangency-labs/solidcraft#4149"
],
"what": "a modelled M10x1.5 internal thread, full length of the bore below a counterbore, in a cylinder with its rim rounded (stack overflow)",
"source": "analytic",
"method": "ISO 68-1 basic profile: H = P sqrt3/2, basic depth 5H/8. External groove (the space between teeth): a trapezoid P/4 wide at the root radius d/2 - 5H/8, widening by 2 tan30 per unit of radius to 7P/8 at d/2. Internal groove: P/8 wide at the major radius d/2, widening to 3P/4 at the minor radius, cut only where there is material (r >= hole radius). Pappus: volume per turn = 2 pi A rc (A the trapezoid area, rc its centroid radius from the axis); a helical sweep of L/P turns removes exactly (L/P) x that, where each end of the thread is a free end or lies inside material. Cylinder D40 h=30; a 8.5 mm through hole with a D18 x 5 counterbore (hole volume pi(9^2 5 + 4.25^2 25) = 2690.9705); the top outer edge rounded R3: removed = 2 pi (R - xbar) A with A = r^2 (1 - pi/4) = 1.9314 and the removed corner's centroid xbar = r (5/6 - pi/4)/(1 - pi/4) = 0.6701 from the corner, so 234.5769. M10x1.5 over the 25 mm of the bore below the counterbore (16.667 turns, rho=4.25): the thread ends at the counterbore floor, so the last groove end may stop up to half a groove short of it; that is under 0.3 mm of pitch, below 4 mm3. V = 37699.1118 - 234.5769 - 2690.9705 - 16.667 x 13.26888 = 34552.4164 mm3. Tolerance 0.3%: faceted helix as for the other thread cases; that is 110 mm3 on this large body (the groove itself is 192 mm3), and the end effect and the faceting stay far below it.",
"outcome": "solid",
"body_count": 1,
"volume_mm3": 34552.4164,
"tolerance": {
"rel": 0.003
},
"bbox": {
"min": [
-20,
-20,
0
],
"max": [
20,
20,
30
]
},
"timeout_s": 600
}