70603de654
* claim: #10940 Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> * Emboss: an emboss or deboss that changes nothing says so (#10940) solid.emboss on a body its tool missed (a sketch on the far side of the material, a depth that stops short) was recorded as a success with no warning, so a sheet metal part looked embossed when it was not. The evaluation now compares the bodies before and after and adds a warning when none changed. A working emboss or deboss is silent. Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> * Emboss: the changed-nothing warning names what to check, not a cause it can't know (#10940) CodeRabbit pointed out that an emboss can change nothing for other reasons than missing the body (for example a profile that lies inside material that is already there), so the warning no longer claims the profile misses the body. It says the operation changed nothing and suggests checking where the profile lies, which side of the face the sketch is on, and the depth. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Emboss test: put the missing sketch below the sheet, since main's sheet metal emboss now cuts from its underside (#10940) On current main a deboss from the XY plane reaches the sheet (it is changed and gets the sheet metal flat-pattern warning), so the test no longer showed an emboss that changes nothing. A sketch 5 mm below the sheet misses it on both bases. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: thocsmith <193096300+thocsmith@users.noreply.github.com> Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>