b4a3a9baae
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). - b2fd08e85 jyviko: Profiler: no smlib category left in its tests and help - d49a7eac0 jyviko: Known-failing tests: the convex chamfer that would grow the part passes - d55fedd56 jyviko: smlib export test: a rounded cube's corners checked on solidcore's spheres - 017a2a607 jyviko: Known-failing tests: the fillet into an earlier round passes on solidcore Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
37 lines
6.7 KiB
Plaintext
37 lines
6.7 KiB
Plaintext
# The cargo tests that fail today on the kernel, solidcore, one a line: `<test> <why it fails
|
|
# today>`, with the issue that tracks it when there is one. Sorted. `<test>` is nextest's
|
|
# `<binary id>::<test name>`, as the junit report names it. CI's test jobs (`cargo xtask known-failing`)
|
|
# fail on a test that fails and is not listed here, and on a listed test that passes: a fix removes its
|
|
# line in the same pull request. The tests stay un-ignored, so every run shows whether they still fail.
|
|
# Refresh: download the junit artifacts of develop's latest CI run, one directory each
|
|
# (`gh run download <run> -R tangency-labs/solidcraft -n <artifact> -D <dir>/<artifact>` for junit
|
|
# and junit-gpu-1..4), run `cargo xtask known-failing --junit <dir>`, then drop each FIXED line and
|
|
# add each REGRESSION line with its cause, from the test's failure message.
|
|
solidcraft-cli::action_matrix::action_matrix_sample 3 baseline actions fail, the same 3 as on C++: 2 shells (Bad Loop Orient on issue-616-lid-ribs; status 1001 on filleted-shelled-box), 1 fillet (SmSurfOfRevolution Test #7 on oblique_cut_of_cylinder)
|
|
solidcraft-cli::model_cache::a_later_round_after_opening_blends_the_saved_rounds_again the later r3 round at the r2 mitre builds solidcore's 10-face corner (7928.743041), the test wants SMLib f916a8d's setback corner (smlib#104), which solidcore ports in solidcore#2310: 15 faces, 7928.142563938
|
|
solidcraft-cli::naming_corpus::corpus_designs_name_alike_every_build_and_fail_where_a_reference_is_gone oracle/83-boundary-loop-thicken does not load: step 8, thicken status 1001, as on C++
|
|
solidcraft-doc::eval::cost_tests::a_tap_marking_searches_only_the_bodies_near_it main's mesh-based version (#10303) not taken; the exact replacement is to come
|
|
solidcraft-doc::eval::cost_tests::a_tap_marking_still_searches_the_bodies_within_its_reach main's mesh-based version (#10303) not taken; the exact replacement is to come
|
|
solidcraft-engine::cmd::edit::tests::inserting_variable_fillet_control_preserves_parameters_at_existing_positions solidcore refuses a variable fillet whose law has a corner (solidcore#430)
|
|
solidcraft-engine::cmd::file::tests::each_format_has_an_export_command_of_its_own the box's planar faces are meshed into 124 triangles, not 12 (the STL is 6284 bytes, the test counts 84 + 50 x 12), as on SMLib
|
|
solidcraft-engine::cmd::sketch_project::tests::intersection_curve_of_picked_faces_spans_the_whole_surface its premise fails off truck: the fit-point spline wall's 3 span faces are not one surface patch in the kernel's mesh (surface_patch gives 1 face, the test wants 3), as on SMLib
|
|
solidcraft-engine::extent_tests::cut_to_the_far_side_of_a_curved_wall main's mesh-based version (#8634) not taken; the exact replacement is to come
|
|
solidcraft-engine::face_name_tests::a_join_that_makes_the_body_bigger_leaves_round_walls_it_never_touched_alone main's edge lookup by a stored point (#11286) finds the edge on the display mesh (edge_near on the body's mesh), not taken; the exact replacement is to come
|
|
solidcraft-engine::hole_face_tests::a_hole_wider_than_the_part_says_it_removes_all_of_it a 40 mm hole at (10, 10) touches the plate's edge y = 30 at one point; the kernel parts the plate there into 2 bodies, the test wants truck's 1, as on SMLib
|
|
solidcraft-engine::measure_centre_tests::a_fillet_round_a_boss_reports_its_radius the round at the foot of a boss is not an analytic torus of minor radius 3, so no face of the body is (the test finds none to measure), as on SMLib
|
|
solidcraft-engine::tests::a_later_round_at_a_mitred_corner_is_blended_with_the_rounds_there solidcore's corner of three rounds of different radii is 7928.74304145614 with 10 faces; the test wants SMLib f916a8d's setback corner (smlib#104), which solidcore ports in solidcore#2310: 15 faces, 7928.142563938
|
|
solidcraft-engine::tests::chord_and_variable_fillets its 2 → 4 → 2 waist: solidcore refuses a variable fillet whose law has a corner (solidcore#430)
|
|
solidcraft-engine::tests::fillet_fit_taper_closes_to_a_point fillet status 1001 on the taper fit (radius 16 closing to 0), as on C++
|
|
solidcraft-engine::tests::mirror_placed::dragging_a_mirrored_part_meshes_its_copies_once a copy of a copy drawn from its first copy's triangles (#10101) is triangulated differently from a fresh mesh of it, where truck's meshes are the same under a rigid move, as on SMLib
|
|
solidcraft-kernel::blend::corner_tests::a_round_ending_in_an_earlier_round_matches_both_together fillet status 1001 on the round that ends in the earlier one, as on C++
|
|
solidcraft-kernel::blend::corner_tests::corner_blends_hold_at_any_scale at 0.01x the arc case's rounds remove 72.783 (scaled back) against 72.713 at 1x, as on C++
|
|
solidcraft-kernel::blend_corner::tests::issue2422_vertical_after_separate_bottom_rounds the check refuses the fillet: edge and vertex tolerance 0.97 against the body's 0.01, as on C++ (#2422)
|
|
solidcraft-kernel::blend_corner::tests::three_rounds_at_a_corner the corner's variable-radius transition between rounds of different radii meets its neighbours at 0.144 degrees once its sections are the balls' touch circles (fillet_gn_section_generator, solidcore#2262; 0 with the great circles), as on SMLib d01d7b0; the corner step replaces that transition
|
|
solidcraft-kernel::blend_variable::tests::variable_radius_with_a_corner_through_a_middle_point solidcore refuses a variable fillet whose law has a corner (solidcore#430)
|
|
solidcraft-kernel::corner_g2::tests::a_long_setback_keeps_the_g2_patch_inside_the_box at set backs 11 to 15 the G2 corner patch bulges past the box, as on C++
|
|
solidcraft-kernel::corner_g2::tests::curvature_rounds_meet_at_a_g2_corner the corner between curvature rounds jumps 2.07 in curvature over 538 stations on solidcore; the test wants it curvature continuous, as SMLib f916a8d's setback corner (smlib#104), which solidcore ports in solidcore#2310 builds it
|
|
solidcraft-kernel::corner_g2::tests::the_box_corner_g2_patch_is_a_closed_solid_curvature_continuous_to_its_neighbours the fitted G2 corner patch bulges 1.7e-5 past the box, as on C++
|
|
solidcraft-kernel::fillet_setback_tests::a_setback_not_past_the_radius_is_refused_naming_the_least solidcore builds setback 5.5 (15 faces) where SMLib f916a8d's setback corner (smlib#104), which solidcore ports in solidcore#2310 refuses it naming the least that builds; nothing names the least setback on solidcore until then
|
|
solidcraft-kernel::tests::fillet_tabbed_plate_outer_loop_and_partial_selection_after_hole the R25 rim and a corner arc round together since solidcore#2223, but the two R2 corner arcs picked together fail 1001 in trim_at_creases (cliff_overflow with the crease trims off), though each builds alone (solidcore#2314)
|
|
solidcraft-smlib::ops::tests::a_variable_round_with_a_corner_in_its_law_is_its_balls_union solidcore refuses a variable fillet whose law has a corner (solidcore#430)
|