Files
makeCAD/tests/kernel-cases/fillets/KNOWN_FAILING
T
jyviko 7099e80059 Wave 502/509: Kernel rig: the pipe on a plate's curvature round meets the plate G2 and the pipe G3, 40307.8856312 (option B's order-2 jets, tangency-labs/solidcraft#10845) (and 1 more)
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- aed047703 jyviko: Kernel rig: the pipe on a plate's curvature round meets the plate G2 and the pipe G3, 40307.8856312 (option B's order-2 jets, tangency-labs/solidcraft#10845)
- 17de3569f jyviko: SMLib: pin f916a8d (a round on a definition face is its definition; the G1 setback fill certified convex, setbacks too short refused naming the least; the G2 certificate halves a span no level can certify at once)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-11-01 21:37:02 -05:00

38 lines
7.4 KiB
Plaintext

# The fillet cases that fail today, one a line: `<case> <why it fails today>`. Sorted. The fillet
# rig gate (.github/workflows/fillet-rig.yml) fails on a case that fails and is not listed here,
# and on a listed case that passes: a fix removes its line in the same pull request.
# Baseline: develop 242bbc89f with the SMLib fixes of 2026-10-29 (integration-overnight + b78bd4a), aarch64 Linux.
1080-fillet-equal-slope-basin-1-mm-rim-loop-4 builds to the analytic volume (rel 5e-9), but the continuity check (g1 at every blend seam) takes in the mitre's creases, G0 by the mitre ruling: the case's continuity seams need the owner's word
1080-fillet-sloped-basin-1-mm-rim-r4-2-edges builds to the analytic volume (rel 6e-9), but the continuity check (g1 at every blend seam) takes in the mitre's creases, G0 by the mitre ruling: the case's continuity seams need the owner's word
1080-fillet-sloped-basin-1-mm-rim-r4-4-edges builds to the analytic volume (rel 3e-9), but the continuity check (g1 at every blend seam) takes in the mitre's creases, G0 by the mitre ruling: the case's continuity seams need the owner's word
2893-chamfer-distance-and-angle-past-the-wall-refused refused for another reason: SMLib SM_ERR_INVALID_INPUT, not a check saying the angle runs past the wall
2893-chamfer-two-distances-elliptical-rim SMLib status 1001: the two arcs of the rim take their chamfer offsets each at its own midpoint, where the faces' angle differs (78.5 and 101.5 deg), and their chamfers do not meet at the tangent corners (held for the owner's ruling on unequal chamfers of a varying angle)
4782-fillet-bar-edge-wider-than-both-faces SMLib status 1001: a convex round past both its faces is not yet built by subtraction
5158-fillet-round-just-past-a-10mm-face SMLib status 1001: the round passes 5e-6 under the box's top back edge, inside the body's tolerance (1e-5), and subtracting its removal region maps that edge to two of the region's faces (SmTopologyIntersector); 10.0001-10.04 open
851-fillet-arc-then-top-front SMLib status 1001: the top front edge's tangent chain (the edge, the arc round's end curve on the front face, the upright under it) rounded R2; along the end curve the R2 ball sits on the arc round's own centre circle, so that piece is the ball about (39.2538, -19, 8) touching front, top and wall (a torus of tube-centre radius 0), the three-edge rolling-ball corner; the same piece on a plane end arc builds (851-fillet-top-front-then-front-left-upright)
851-fillet-top-front-then-upright SMLib status 1001: the upright's tangent chain (the upright, the first round's end curve on the wall, the arc's top edge) rounded R2; along the end curve the R2 ball sits on the first round's axis, so that piece is the ball about (39.2538, -19, 8) touching front, top and wall (a torus of tube-centre radius 0), the three-edge rolling-ball corner; the upright alone builds, the upright with the end curve fails the same; the same piece on a plane end arc builds (851-fillet-top-front-then-front-left-upright)
9-fillet-corner-curvature-with-reduce-fit not supported yet: solid.fillet builds corner g2 with the exact fit only
9-fillet-corner-curvature-with-taper-fit not supported yet: solid.fillet builds corner g2 with the exact fit only
cov-fillet-g2-corner-beside-a-cylinder not supported yet: the curvature fillet builds its sections only between planar faces ("a picked edge is not on the face beside it" on the cylinder's arc)
cov-fillet-g2-five-edge-apex-corner refused: the default setback is shorter than where the rounds' contact lines meet (3.5056 mm from the apex); the corner should take a setback that works
cov-fillet-g2-four-edge-apex-corner refused: the default setback is shorter than where the rounds' contact lines meet (3.9027 mm from the apex); the corner should take a setback that works
cov-fillet-g2-mixed-corner not supported yet: SMLib sets back a corner only where its edges are all convex or all concave
cov-fillet-g2-oblique-three-edge-corner the G2 corner patch meets the new order-2 section's rounds only G1 at one face seam (its volume holds); the corner step rebuilds the patch
cov-fillet-g2-pocket-corner the G2 corner patch meets the new order-2 section's rounds only G1 at one face seam (its volume holds); the corner step rebuilds the patch
cov-fillet-turn-swept-boss-base-r1 not supported yet: solid.fillet has no `turn`; the corners are mitred (12508.9676, the Mitre case's volume)
cov-fillet-turn-swept-pocket-sharp-corner-refused-r1 not supported yet: solid.fillet has no `turn`, so the sharp concave corners are mitred, not refused
cov-junction-boss-tilt-20-root-round SMLib fillet status 1001 on a cylinder tilted 20 degrees into the plate (also before the blend rework)
cov-junction-boss-tilt-40-root-round SMLib fillet status 1001 on a cylinder tilted 40 degrees into the plate (also before the blend rework)
cov-junction-tee-equal-round equal pipes' intersection is two plane ellipses crossing: their exact conic-pair rounds meet at the crossings in a corner the old corner code cannot join (built by the traced rounds before smlib#77); the corner step
cov-junction-y-junction-120-round refused: the faces between the three intersection curves narrow to nothing at the two triple points, so the room check trips; a three-edge concave corner (the corner step)
report-drafted-peg-front-and-concave-rounds-together-r2 not supported yet: SMLib refuses the corner where the drafted front top edge runs tangent into the concave arc (on the cone) as of no kind its blend corners take
report-fillet-concave-arc-and-front-top-edge-together-r5-solver-residues the corner patch where the convex and concave rounds meet stands 0.128 out of the front face (box y min -0.0699 against 0.0579)
report-fillet-concave-arc-and-front-top-edge-together-r7-solver-residues the corner patch where the convex and concave rounds meet stands 0.230 out of the front face (box y min -0.1723 against 0.0579)
report-fillet-concave-arc-and-front-top-edge-together-solver-residues the corner patch where the convex and concave rounds meet stands 0.0374 out of the front face (box y min 0.0205 against 0.0579)
report-fillet-curvature-three-edges-at-bar-corner the G2 corner patch meets the new order-2 section's rounds only G1 at one face seam (its volume holds); the corner step rebuilds the patch
report-fillet-curvature-three-edges-at-bar-corner-solver-residues the G2 corner patch meets the new order-2 section's rounds only G1 at one face seam (its volume holds); the corner step rebuilds the patch
report-peg-front-and-concave-chamfers-together-d2 SMLib status 1001 at the 3x2 mixed-convexity corner where the two chamfers meet on the tangent seam (SmFillet3x2MixedConvexityCorner): the corner, not the tangent ends, which each chamfer alone now builds
report-peg-front-and-concave-rounds-together-r2 the corner patch where the convex and concave rounds meet stands 0.0374 out of the front face (box y min -0.0374), and the two rounds meet at (32, 2, 10), where their contact lines on the top cross, with normals 180 degrees apart
report-peg-front-and-concave-rounds-together-r5 the corner patch where the convex and concave rounds meet stands 0.128 out of the front face (box y min -0.1278), and the two rounds meet at (27.351, 5, 10), where their contact lines on the top cross, with normals 180 degrees apart
report-peg-step-front-and-concave-rounds-together-r2 SMLib status 1001: Fillet Surface Computation Failure on the peg read back from STEP (the native peg builds, with its corner patch out of the front face)