c6d361347f
With a section shown, the marking pass decided where the cap shows (the stencil) and wrote the depth everything after it tests against. #1768 gave it the faces' FACE_BIAS for the second job, so edges draw over their own faces (#1434). For the first job its slope part is unfair: next to an edge where a back face seen through the cut meets a front face, the front face won a band about a pixel wide although the back face is nearer. The cap skipped that band, and the edge line showed through the cut. #6363 marked those samples again from the back faces, pulled toward the eye as far as FACE_BIAS pushes. That closes the gaps beside the edges, but the pull also lets back faces win wherever they lie within the push of a front face, along every body's far silhouettes, and the cap hatches that band. On bherbruck's block, the band away from the cut went from 58 px orthographic and 534 px perspective before #6363 to 618 and 780 with it. In the app, his filleted hub showed it in every frame of a 36-step orbit in both projections. This replaces that pass. While a section is shown the opaque model now draws in four steps (`Cut`): 1. mark: the faces by their true depth (no push): colour, the stencil and depth; 2. a triangle over the viewport sets the depth back to the far plane, colour and stencil kept; 3. push: the faces again with FACE_BIAS, depth only, so the depth is what unsectioned frames have and edges draw over their faces as before; 4. cap: depth only, as #6728 made it; the mark pass has drawn the cap's colour and hatch, as fs_solid draws a back face seen through the cut. The window pass's depth reset and this one are one helper, `depth_reset_pipeline`, for either depth direction, and its passes are built by #6728's `solid_writes`. Unsectioned frames are unchanged. The CPU rasterizer already chose the cap by true depth. Tests (crates/gpu/tests/depth.rs), with the device's float depth and the 24-bit fallback: - a_cut_hides_the_edges_behind_it (new): bherbruck's block cut at y = -16, home view, orthographic and perspective. No edge shows through the cap, and away from the cut the picture is a box of just the kept part's: 0 px orthographic and 1 perspective (main: 618 and 780). - bherbruck's pocket and hub tests from #6363 are kept and pass (pocket 0 px; hub 1 and 2 px over its twelve views, as with #6363's pass). - an_edge_on_a_face_draws_whole_at_any_angle and an_edge_just_behind_a_face_stays_hidden_on_a_large_design also run with a section shown. In the app (safe mode, WARP), with 625 patterned cylinders cut by a section, the frame time is that of main (#6363): 33.5 against 34.3 ms at the home view, 34.1 against 35.2 ms with the model filling the view. Co-authored-by: bherbruck <brennen.herbruck@gmail.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>