d557c09c3b
* claim: #4813 * Sketch text: measure a line by the rule that draws it (#4813) `TextMetrics`, made once from a font and a style, parses the face once and gives the scale for a capital height, the distance between lines, a line's width and the characters the font has no glyph for (in order, each time, including those its character map sends to `.notdef`). `text_geometry_styled` lays its lines out through it: one rule for measured and drawn text, no kerning, a missing character still drawn as `?`. Measuring builds no outlines, so a text too large to draw (`MAX_LINK_ENTITIES`, `MAX_TEXT_CHARS`) can still be measured. Every outline stays bit for bit the same: a test pins five styled texts, captured before the change. The size and spacing checks are shared, and still run before the font is looked for; a text whose place or angle is not finite now says so instead of naming its height. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
526 lines
22 KiB
Rust
526 lines
22 KiB
Rust
//! Sketch text: glyph outlines of a font as lines, conics and cubic splines, so text closes
|
|
//! into profiles that can be extruded. TrueType quadratic Béziers are conics with rho = 0.5;
|
|
//! OpenType (CFF) cubic Béziers are cubic control splines, both exact. A glyph's counters (the
|
|
//! holes of A, B, 8…) are loops inside its outline; profile detection makes them holes.
|
|
//!
|
|
//! The default font is embedded (Liberation Sans, SIL OFL 1.1; see `assets/fonts/liberation-sans/OFL.txt` and
|
|
//! ATTRIBUTION.md); [`crate::fonts`] finds others by file path or installed family name. [`TextMetrics`] measures
|
|
//! text by the rule that draws it.
|
|
|
|
use serde::{Deserialize, Serialize};
|
|
use solidcraft_geom::{Ring, Vec2};
|
|
|
|
use crate::fonts::{FontData, font_data_styled};
|
|
use crate::link::{LinkGeom, LinkKind, LinkSource, MAX_LINK_ENTITIES};
|
|
use crate::model::{Result, Sketch, SketchError};
|
|
|
|
/// Most characters in one text.
|
|
pub const MAX_TEXT_CHARS: usize = 1000;
|
|
|
|
struct Outline {
|
|
out: Vec<LinkGeom>,
|
|
start: Vec2,
|
|
cur: Vec2,
|
|
map: Box<dyn Fn(f32, f32) -> Vec2>,
|
|
}
|
|
|
|
impl Outline {
|
|
fn line(&mut self, to: Vec2) {
|
|
if self.cur.dist(to) > 1e-9 {
|
|
self.out.push(LinkGeom::Line(self.cur, to));
|
|
}
|
|
self.cur = to;
|
|
}
|
|
fn quad(&mut self, apex: Vec2, to: Vec2) {
|
|
let (a, b) = (self.cur, to);
|
|
let chord = b - a;
|
|
let off = chord.cross(apex - a).abs() / chord.len().max(1e-12);
|
|
if off < 1e-6 || a.dist(b) < 1e-9 {
|
|
self.line(to);
|
|
return;
|
|
}
|
|
self.out.push(LinkGeom::Conic { a, apex, b, rho: 0.5 });
|
|
self.cur = to;
|
|
}
|
|
fn cubic(&mut self, c1: Vec2, c2: Vec2, to: Vec2) {
|
|
let (a, b) = (self.cur, to);
|
|
let chord = b - a;
|
|
let l = chord.len().max(1e-12);
|
|
let off = (chord.cross(c1 - a).abs() / l).max(chord.cross(c2 - a).abs() / l);
|
|
// Straight (controls on the chord, between its ends): a line.
|
|
let between = |c: Vec2| (c - a).dot(chord) >= -1e-9 && (c - b).dot(chord) <= 1e-9;
|
|
if a.dist(b) < 1e-9 || (off < 1e-6 && between(c1) && between(c2)) {
|
|
self.line(to);
|
|
return;
|
|
}
|
|
self.out.push(LinkGeom::Spline { pts: vec![a, c1, c2, b], control: true, degree: 3, periodic: false });
|
|
self.cur = to;
|
|
}
|
|
}
|
|
|
|
impl ttf_parser::OutlineBuilder for Outline {
|
|
fn move_to(&mut self, x: f32, y: f32) {
|
|
let p = (self.map)(x, y);
|
|
self.start = p;
|
|
self.cur = p;
|
|
}
|
|
fn line_to(&mut self, x: f32, y: f32) {
|
|
let p = (self.map)(x, y);
|
|
self.line(p);
|
|
}
|
|
fn quad_to(&mut self, x1: f32, y1: f32, x: f32, y: f32) {
|
|
let (c, p) = ((self.map)(x1, y1), (self.map)(x, y));
|
|
self.quad(c, p);
|
|
}
|
|
fn curve_to(&mut self, x1: f32, y1: f32, x2: f32, y2: f32, x: f32, y: f32) {
|
|
let (c1, c2, p) = ((self.map)(x1, y1), (self.map)(x2, y2), (self.map)(x, y));
|
|
self.cubic(c1, c2, p);
|
|
}
|
|
fn close(&mut self) {
|
|
let s = self.start;
|
|
self.line(s);
|
|
}
|
|
}
|
|
|
|
/// Where each line of a text sits against its anchor (`at`, or a point of its path).
|
|
#[derive(Clone, Copy, Debug, Default, PartialEq, Eq, Serialize, Deserialize)]
|
|
#[serde(rename_all = "snake_case")]
|
|
pub enum TextAlign {
|
|
/// The line starts at the anchor.
|
|
#[default]
|
|
Left,
|
|
/// The line is centred on it.
|
|
Center,
|
|
/// The line ends at it.
|
|
Right,
|
|
}
|
|
|
|
impl TextAlign {
|
|
fn is_left(&self) -> bool {
|
|
*self == TextAlign::Left
|
|
}
|
|
}
|
|
|
|
/// How a text is set: the style of its font, where its lines sit, the space between its letters
|
|
/// and lines, and the sketch curve its baseline follows (instead of the straight line from `at`).
|
|
#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
|
|
pub struct TextStyle {
|
|
#[serde(default, skip_serializing_if = "is_false")]
|
|
pub bold: bool,
|
|
#[serde(default, skip_serializing_if = "is_false")]
|
|
pub italic: bool,
|
|
#[serde(default, skip_serializing_if = "TextAlign::is_left")]
|
|
pub align: TextAlign,
|
|
/// Extra space between letters (mm; negative brings them closer).
|
|
#[serde(default, skip_serializing_if = "is_zero")]
|
|
pub letter_spacing: f64,
|
|
/// The distance between lines as a multiple of the font's own.
|
|
#[serde(default = "one", skip_serializing_if = "is_one")]
|
|
pub line_spacing: f64,
|
|
/// The id of a curve of the same sketch the baseline follows (`at` and the angle then do not
|
|
/// place the text).
|
|
#[serde(default, skip_serializing_if = "Option::is_none")]
|
|
pub path: Option<String>,
|
|
/// Along the path the other way round, so the text sits on its other side.
|
|
#[serde(default, skip_serializing_if = "is_false")]
|
|
pub reverse: bool,
|
|
}
|
|
|
|
impl Default for TextStyle {
|
|
fn default() -> Self {
|
|
TextStyle { bold: false, italic: false, align: TextAlign::Left, letter_spacing: 0.0, line_spacing: 1.0, path: None, reverse: false }
|
|
}
|
|
}
|
|
|
|
impl TextStyle {
|
|
/// Nothing but the defaults (what a text saved before styles had).
|
|
pub fn is_plain(&self) -> bool {
|
|
*self == TextStyle::default()
|
|
}
|
|
}
|
|
|
|
fn is_false(b: &bool) -> bool {
|
|
!*b
|
|
}
|
|
|
|
fn is_zero(x: &f64) -> bool {
|
|
*x == 0.0
|
|
}
|
|
|
|
fn one() -> f64 {
|
|
1.0
|
|
}
|
|
|
|
fn is_one(x: &f64) -> bool {
|
|
*x == 1.0
|
|
}
|
|
|
|
/// How far a slanted (made-up italic) glyph leans: 12 degrees.
|
|
const SLANT_DEG: f64 = 12.0;
|
|
/// Largest letter spacing (mm either way) and line spacing factor accepted.
|
|
const MAX_LETTER_SPACING: f64 = 1e5;
|
|
const LINE_SPACING_RANGE: (f64, f64) = (0.05, 100.0);
|
|
|
|
/// A capital height (mm) text can be set at: finite, above a micrometre and below a kilometre.
|
|
fn check_height(height: f64) -> Result<()> {
|
|
if height.is_finite() && height > 1e-6 && height < 1e6 { Ok(()) } else { Err(SketchError::Invalid("text height must be positive".into())) }
|
|
}
|
|
|
|
/// A style's spacing: a finite letter spacing of at most [`MAX_LETTER_SPACING`] either way, and a line spacing in
|
|
/// [`LINE_SPACING_RANGE`].
|
|
fn check_spacing(style: &TextStyle) -> Result<()> {
|
|
if !(style.letter_spacing.is_finite() && style.letter_spacing.abs() <= MAX_LETTER_SPACING) {
|
|
return Err(SketchError::Invalid("the letter spacing must be a finite length".into()));
|
|
}
|
|
if !(style.line_spacing.is_finite() && (LINE_SPACING_RANGE.0..=LINE_SPACING_RANGE.1).contains(&style.line_spacing)) {
|
|
return Err(SketchError::Invalid(format!(
|
|
"the line spacing must be between {} and {} times the font's",
|
|
LINE_SPACING_RANGE.0, LINE_SPACING_RANGE.1
|
|
)));
|
|
}
|
|
Ok(())
|
|
}
|
|
|
|
/// How a font sets text in a style, read once from its face: the scale for a capital height, the distance between
|
|
/// lines, the width of a line and the characters the font has no glyph for. Sketch text is laid out with it, so a
|
|
/// line measures what it draws. Kerning stays off, as in sketch text.
|
|
pub struct TextMetrics<'a> {
|
|
face: ttf_parser::Face<'a>,
|
|
/// The capital height, in font units.
|
|
cap: f64,
|
|
/// The distance between baselines in font units: ascender to descender, plus the line gap (none when not positive).
|
|
pitch: f64,
|
|
/// What a character the font lacks is set as: its `?`, when it has one.
|
|
fallback: Option<ttf_parser::GlyphId>,
|
|
letter_spacing: f64,
|
|
line_spacing: f64,
|
|
}
|
|
|
|
impl<'a> TextMetrics<'a> {
|
|
/// The face of `font` set in `style`: its letter and line spacing (its bold and italic chose the face).
|
|
pub fn new(font: &'a FontData, style: &TextStyle) -> Result<TextMetrics<'a>> {
|
|
check_spacing(style)?;
|
|
let face = ttf_parser::Face::parse(font.bytes(), font.index).map_err(|e| SketchError::Invalid(format!("font: {e}")))?;
|
|
Ok(TextMetrics {
|
|
cap: cap_height(&face),
|
|
pitch: f64::from(face.ascender()) - f64::from(face.descender()) + f64::from(face.line_gap()),
|
|
fallback: face.glyph_index('?'),
|
|
letter_spacing: style.letter_spacing,
|
|
line_spacing: style.line_spacing,
|
|
face,
|
|
})
|
|
}
|
|
|
|
/// Millimetres per font unit at a capital height of `height` mm.
|
|
pub fn scale(&self, height: f64) -> Result<f64> {
|
|
check_height(height)?;
|
|
Ok(height / self.cap)
|
|
}
|
|
|
|
/// The distance between baselines (mm) at a capital height of `height` mm: the font's own (one and a half heights
|
|
/// when it gives none) times the line spacing.
|
|
pub fn line_pitch(&self, height: f64) -> Result<f64> {
|
|
let k = self.scale(height)?;
|
|
let own = if self.pitch > 0.0 { self.pitch * k } else { height * 1.5 };
|
|
Ok(own * self.line_spacing)
|
|
}
|
|
|
|
/// The width (mm) of one line at a capital height of `height` mm, as it is drawn: from its first glyph's origin to
|
|
/// the end of its last glyph's advance. A line break in it is a character like any other.
|
|
pub fn line_width(&self, line: &str, height: f64) -> Result<f64> {
|
|
let k = self.scale(height)?;
|
|
Ok(self.glyphs(line, k).last().map(|(_, x, advance)| x + advance).unwrap_or(0.0))
|
|
}
|
|
|
|
/// The characters of one line the font has no glyph for, in order and each time they come: those its character map
|
|
/// lacks (set as its `?`, or left out when it has none) and those it sends to its missing-glyph box (`.notdef`, drawn
|
|
/// as it is).
|
|
pub fn missing(&self, line: &str) -> Vec<char> {
|
|
line.chars().filter(|ch| self.face.glyph_index(*ch).is_none_or(|g| g.0 == 0)).collect()
|
|
}
|
|
|
|
/// The one rule that lays out a line, at `k` mm per font unit: each glyph, where its origin is along the line and
|
|
/// its advance. No kerning; a character the font lacks is set as its `?` (left out when it has none either); the
|
|
/// letter spacing goes between glyphs, not after the last.
|
|
fn glyphs(&self, line: &str, k: f64) -> impl Iterator<Item = (ttf_parser::GlyphId, f64, f64)> {
|
|
let mut pen = 0.0f64;
|
|
line.chars().filter_map(move |ch| {
|
|
let gid = self.face.glyph_index(ch).or(self.fallback)?;
|
|
let advance = f64::from(self.face.glyph_hor_advance(gid).unwrap_or(0)) * k;
|
|
let x = pen;
|
|
pen += advance + self.letter_spacing;
|
|
Some((gid, x, advance))
|
|
})
|
|
}
|
|
}
|
|
|
|
/// Outline geometry of `text` in the built-in font (see [`text_geometry_in`]).
|
|
pub fn text_geometry(text: &str, at: Vec2, height: f64, angle: f64) -> Result<Vec<LinkGeom>> {
|
|
text_geometry_in(None, text, at, height, angle)
|
|
}
|
|
|
|
/// Outline geometry of `text` in `font` (None: the built-in font; else a font file path or an
|
|
/// installed family name, see [`crate::fonts::font_data`]) with its baseline starting at `at`,
|
|
/// capital height `height` (mm), rotated by `angle` (radians) about `at`. Lines break at `\n`.
|
|
pub fn text_geometry_in(font: Option<&str>, text: &str, at: Vec2, height: f64, angle: f64) -> Result<Vec<LinkGeom>> {
|
|
text_geometry_styled(font, text, at, height, angle, &TextStyle::default(), None)
|
|
}
|
|
|
|
/// Outline geometry of `text` set in `style` (see [`text_geometry_in`]). With `path` (the
|
|
/// points of the curve [`TextStyle::path`] names) the baseline follows it: each letter stands on
|
|
/// the curve, turned with it, and the lines after the first run below it.
|
|
pub fn text_geometry_styled(
|
|
font: Option<&str>,
|
|
text: &str,
|
|
at: Vec2,
|
|
height: f64,
|
|
angle: f64,
|
|
style: &TextStyle,
|
|
path: Option<&[Vec2]>,
|
|
) -> Result<Vec<LinkGeom>> {
|
|
if text.chars().count() > MAX_TEXT_CHARS {
|
|
return Err(SketchError::TooLarge);
|
|
}
|
|
// The numbers first: finding an installed font can mean reading its folders.
|
|
check_height(height)?;
|
|
if !(angle.is_finite() && at.is_finite()) {
|
|
return Err(SketchError::Invalid("the text's place and angle must be finite".into()));
|
|
}
|
|
check_spacing(style)?;
|
|
let (data, slant) = font_data_styled(font, style.bold, style.italic)?;
|
|
let metrics = TextMetrics::new(&data, style)?;
|
|
let (k, pitch) = (metrics.scale(height)?, metrics.line_pitch(height)?);
|
|
let shear = if slant { SLANT_DEG.to_radians().tan() } else { 0.0 };
|
|
let along = path.map(|pts| Path::new(pts, style.reverse)).transpose()?;
|
|
let anchor = along.as_ref().map(|p| p.anchor(style.align)).unwrap_or(0.0);
|
|
let (sin, cos) = angle.sin_cos();
|
|
let mut out = Vec::new();
|
|
for (row, line) in text.split('\n').enumerate() {
|
|
let base_y = -(row as f64) * pitch;
|
|
let start = match style.align {
|
|
TextAlign::Left => 0.0,
|
|
TextAlign::Center => -metrics.line_width(line, height)? / 2.0,
|
|
TextAlign::Right => -metrics.line_width(line, height)?,
|
|
};
|
|
for (gid, x, advance) in metrics.glyphs(line, k) {
|
|
// The glyph's frame: its origin on the baseline and the way the baseline runs.
|
|
let (origin, dir) = match &along {
|
|
None => {
|
|
let dir = Vec2::new(cos, sin);
|
|
(at + dir * (start + x) + Vec2::new(-sin, cos) * base_y, dir)
|
|
}
|
|
Some(p) => {
|
|
let (mid, dir) = p.frame(anchor + start + x + advance / 2.0, advance);
|
|
(mid - dir * (advance / 2.0) + Vec2::new(-dir.y, dir.x) * base_y, dir)
|
|
}
|
|
};
|
|
let up = Vec2::new(-dir.y, dir.x);
|
|
let map = Box::new(move |gx: f32, gy: f32| {
|
|
let (gx, gy) = (f64::from(gx) * k, f64::from(gy) * k);
|
|
origin + dir * (gx + gy * shear) + up * gy
|
|
});
|
|
let mut ob = Outline { out: Vec::new(), start: origin, cur: origin, map };
|
|
let _ = metrics.face.outline_glyph(gid, &mut ob);
|
|
out.extend(ob.out);
|
|
// A font can give a glyph any number of points: stop where the link would be refused anyway.
|
|
if out.len() > MAX_LINK_ENTITIES {
|
|
return Err(SketchError::TooLarge);
|
|
}
|
|
}
|
|
}
|
|
if out.iter().any(|g| !geom_finite(g)) {
|
|
return Err(SketchError::Invalid("the text does not fit its path".into()));
|
|
}
|
|
Ok(out)
|
|
}
|
|
|
|
fn geom_finite(g: &LinkGeom) -> bool {
|
|
match g {
|
|
LinkGeom::Line(a, b) => a.is_finite() && b.is_finite(),
|
|
LinkGeom::Conic { a, apex, b, rho } => a.is_finite() && apex.is_finite() && b.is_finite() && rho.is_finite(),
|
|
LinkGeom::Spline { pts, .. } => pts.iter().all(|p| p.is_finite()),
|
|
_ => true,
|
|
}
|
|
}
|
|
|
|
/// A curve a text follows, as points with the distance along it to each: oriented so the text
|
|
/// reads left to right (an open curve runs rightwards, a closed one clockwise, the text on its
|
|
/// outside) unless reversed.
|
|
struct Path {
|
|
pts: Vec<Vec2>,
|
|
along: Vec<f64>,
|
|
closed: bool,
|
|
}
|
|
|
|
impl Path {
|
|
fn new(points: &[Vec2], reverse: bool) -> Result<Path> {
|
|
let mut pts: Vec<Vec2> = Vec::with_capacity(points.len());
|
|
for p in points {
|
|
if !p.is_finite() {
|
|
return Err(SketchError::Invalid("the text's path is not a finite curve".into()));
|
|
}
|
|
if pts.last().is_none_or(|q: &Vec2| q.dist(*p) > 1e-9) {
|
|
pts.push(*p);
|
|
}
|
|
}
|
|
let (Some(first), Some(last)) = (pts.first().copied(), pts.last().copied()) else {
|
|
return Err(SketchError::Invalid("the text's path has no length".into()));
|
|
};
|
|
let length: f64 = pts.iter().zip(pts.iter().skip(1)).map(|(a, b)| a.dist(*b)).sum();
|
|
if pts.len() < 2 || length < 1e-9 {
|
|
return Err(SketchError::Invalid("the text's path has no length".into()));
|
|
}
|
|
let closed = first.dist(last) <= 1e-9 * length.max(1.0);
|
|
let readable = if closed {
|
|
// Clockwise: the text stands on the outside.
|
|
Ring::from(pts.clone()).signed_area() <= 0.0
|
|
} else {
|
|
last.x >= first.x - 1e-9 * length
|
|
};
|
|
if readable == reverse {
|
|
pts.reverse();
|
|
}
|
|
let mut along = Vec::with_capacity(pts.len());
|
|
let mut total = 0.0;
|
|
for (i, p) in pts.iter().enumerate() {
|
|
if let Some(prev) = i.checked_sub(1).and_then(|j| pts.get(j)) {
|
|
total += prev.dist(*p);
|
|
}
|
|
along.push(total);
|
|
}
|
|
Ok(Path { pts, along, closed })
|
|
}
|
|
|
|
fn length(&self) -> f64 {
|
|
self.along.last().copied().unwrap_or(0.0)
|
|
}
|
|
|
|
/// Where the lines are aligned to: an open curve's start, middle or end; on a closed curve
|
|
/// its top, whatever the alignment.
|
|
fn anchor(&self, align: TextAlign) -> f64 {
|
|
if self.closed {
|
|
return self.pts.iter().zip(&self.along).max_by(|(p, _), (q, _)| p.y.total_cmp(&q.y)).map(|(_, s)| *s).unwrap_or(0.0);
|
|
}
|
|
match align {
|
|
TextAlign::Left => 0.0,
|
|
TextAlign::Center => self.length() / 2.0,
|
|
TextAlign::Right => self.length(),
|
|
}
|
|
}
|
|
|
|
/// The point at distance `s` along the curve (around a closed one; past the ends of an open
|
|
/// one, straight on).
|
|
fn point(&self, s: f64) -> Vec2 {
|
|
let length = self.length();
|
|
let s = if self.closed { s.rem_euclid(length) } else { s };
|
|
let (first, last) = (self.pts.first().copied().unwrap_or_default(), self.pts.last().copied().unwrap_or_default());
|
|
if !self.closed && s <= 0.0 {
|
|
let d = self.pts.get(1).and_then(|q| (*q - first).normalized()).unwrap_or(Vec2::X);
|
|
return first + d * s;
|
|
}
|
|
if !self.closed && s >= length {
|
|
let n = self.pts.len();
|
|
let d = n.checked_sub(2).and_then(|i| self.pts.get(i)).and_then(|q| (last - *q).normalized()).unwrap_or(Vec2::X);
|
|
return last + d * (s - length);
|
|
}
|
|
let i = self.along.partition_point(|a| *a < s).clamp(1, self.pts.len().saturating_sub(1).max(1));
|
|
match (self.pts.get(i - 1), self.pts.get(i), self.along.get(i - 1), self.along.get(i)) {
|
|
(Some(a), Some(b), Some(sa), Some(sb)) if sb > sa => *a + (*b - *a) * ((s - sa) / (sb - sa)),
|
|
(Some(a), ..) => *a,
|
|
_ => first,
|
|
}
|
|
}
|
|
|
|
/// The point at `s` and the way the curve runs there, over a glyph `width` wide (the chord
|
|
/// across it, so a glyph sits evenly on a bend).
|
|
fn frame(&self, s: f64, width: f64) -> (Vec2, Vec2) {
|
|
let h = (width / 2.0).max(self.length() * 1e-4).max(1e-9);
|
|
let dir = (self.point(s + h) - self.point(s - h)).normalized().unwrap_or(Vec2::X);
|
|
(self.point(s), dir)
|
|
}
|
|
}
|
|
|
|
impl Sketch {
|
|
/// The outline geometry of a text source of this sketch: its path, when it has one, is a
|
|
/// curve of this sketch as it is now.
|
|
pub fn text_source_geometry(&self, src: &LinkSource) -> Result<Vec<LinkGeom>> {
|
|
let LinkSource::Text { text, at, height, angle, font, style, .. } = src else {
|
|
return Err(SketchError::Invalid("not a text".into()));
|
|
};
|
|
let path = match &style.path {
|
|
None => None,
|
|
Some(id) => {
|
|
let ci = self.curve_index(id).ok_or_else(|| SketchError::Invalid(format!("the text's path `{id}` is not a curve of this sketch")))?;
|
|
let of_text =
|
|
self.curves.get(ci).and_then(|c| c.link.as_deref()).and_then(|l| self.link(l)).is_some_and(|l| l.kind == LinkKind::Text);
|
|
if of_text {
|
|
return Err(SketchError::Invalid("a text cannot follow the outline of a text".into()));
|
|
}
|
|
Some(self.polyline(ci))
|
|
}
|
|
};
|
|
text_geometry_styled(font.as_deref(), text, *at, *height, *angle, style, path.as_deref())
|
|
}
|
|
}
|
|
|
|
/// The font's capital height in font units: from its OS/2 table, else the top of its `H`, else
|
|
/// 70 % of the em.
|
|
fn cap_height(face: &ttf_parser::Face) -> f64 {
|
|
face.capital_height()
|
|
.map(f64::from)
|
|
.filter(|c| *c > 0.0)
|
|
.or_else(|| face.glyph_index('H').and_then(|g| face.glyph_bounding_box(g)).map(|b| f64::from(b.y_max)).filter(|c| *c > 0.0))
|
|
.unwrap_or(f64::from(face.units_per_em().max(1)) * 0.7)
|
|
}
|
|
|
|
#[cfg(test)]
|
|
#[path = "text_style_tests.rs"]
|
|
mod style_tests;
|
|
|
|
#[cfg(test)]
|
|
mod tests {
|
|
use super::*;
|
|
|
|
#[test]
|
|
fn letters_have_closed_outlines_at_the_cap_height() {
|
|
let g = text_geometry("HO", Vec2::new(5.0, 0.0), 10.0, 0.0).unwrap();
|
|
assert!(!g.is_empty());
|
|
let ys: Vec<f64> = g
|
|
.iter()
|
|
.flat_map(|x| match *x {
|
|
LinkGeom::Line(a, b) => vec![a.y, b.y],
|
|
LinkGeom::Conic { a, b, .. } => vec![a.y, b.y],
|
|
_ => vec![],
|
|
})
|
|
.collect();
|
|
let top = ys.iter().cloned().fold(f64::MIN, f64::max);
|
|
assert!((top - 10.0).abs() < 0.3, "{top}");
|
|
assert!(g.iter().any(|x| matches!(x, LinkGeom::Conic { .. })), "O has curves");
|
|
assert!(text_geometry("x", Vec2::ZERO, -1.0, 0.0).is_err());
|
|
assert!(text_geometry(&"x".repeat(2000), Vec2::ZERO, 1.0, 0.0).is_err());
|
|
// Empty text makes nothing (not an error here; the command rejects it).
|
|
assert!(text_geometry("", Vec2::ZERO, 1.0, 0.0).unwrap().is_empty());
|
|
}
|
|
|
|
#[test]
|
|
fn a_font_file_gives_the_same_outlines_and_unknown_fonts_are_errors() {
|
|
let path = std::path::Path::new(env!("CARGO_MANIFEST_DIR")).join("../../assets/fonts/liberation-sans/LiberationSans-Regular.ttf");
|
|
let by_file = text_geometry_in(Some(&path.to_string_lossy()), "A7_L", Vec2::ZERO, 8.0, 0.0).unwrap();
|
|
assert_eq!(by_file, text_geometry("A7_L", Vec2::ZERO, 8.0, 0.0).unwrap());
|
|
let e = text_geometry_in(Some("No Such Family 12345"), "A", Vec2::ZERO, 8.0, 0.0).unwrap_err().to_string();
|
|
assert!(e.contains("unknown font"), "{e}");
|
|
}
|
|
|
|
#[test]
|
|
fn cubic_outlines_stay_exact_splines() {
|
|
let mut ob = Outline { out: Vec::new(), start: Vec2::ZERO, cur: Vec2::ZERO, map: Box::new(|x, y| Vec2::new(f64::from(x), f64::from(y))) };
|
|
ttf_parser::OutlineBuilder::move_to(&mut ob, 0.0, 0.0);
|
|
ttf_parser::OutlineBuilder::curve_to(&mut ob, 0.0, 10.0, 10.0, 10.0, 10.0, 0.0);
|
|
// A cubic with its controls on the chord is a line.
|
|
ttf_parser::OutlineBuilder::curve_to(&mut ob, 7.0, 0.0, 3.0, 0.0, 0.0, 0.0);
|
|
assert_eq!(ob.out.len(), 2);
|
|
assert!(matches!(&ob.out[0], LinkGeom::Spline { pts, control: true, degree: 3, .. } if pts.len() == 4));
|
|
assert!(matches!(ob.out[1], LinkGeom::Line(..)));
|
|
}
|
|
}
|