Files
likang 7e01147566
CI / typecheck + test + build (push) Has been cancelled
Initial commit: import VibeMake PCB Studio
2026-11-03 11:20:08 +08:00

269 lines
8.4 KiB
TypeScript

// SPDX-License-Identifier: GPL-3.0-or-later
// Copyright (C) 2026 ZiroEDA and contributors.
// Portions derived from KiCad, copyright The KiCad Developers. See NOTICE.md.
/**
* `advanced_config.h`: `ADVANCED_CFG`, the developer settings at their
* defaults (`advanced_config.cpp`). There is no `kicad_advanced` file to load
* here; the values are the ones the reference ships with. Members join as
* the code that reads them is ported.
*/
export class ADVANCED_CFG {
/** The DPI of the screen; `wxDC::GetPPI()` reports 96 but 91 is the closest match to the legacy renderer. */
m_ScreenDPI = 91;
/**
* Show UUIDs of items in the message panel: 0 no, 1 the whole UUID, 2 its
* first eight characters. Setting name: "MsgPanelShowUuids"; default 0.
*/
m_MsgPanelShowUuids = 0;
/**
* The number of milliseconds to wait in a click before showing a disambiguation menu.
* Setting name: "DisambiguationTime"; default 500.
*/
m_DisambiguationMenuDelay = 500;
/**
* Set the maximum number of characters that can be pasted without warning.
* Pasting very long text strings can cause the application to freeze for a
* long time and are probably not what the user intended.
* Setting name: "MaxPastedTextLength"; default 100.
*/
m_MaxPastedTextLength = 100;
/**
* Ratio by which a PCB selection's item visibility must exceed the visibility of items
* obscuring it before it is considered a candidate (`PCB_SELECTION_TOOL::
* pruneObscuredSelectionCandidates`). 1.0 turns the pruning off.
* Setting name: "PcbSelectionVisibilityRatio"; default 1.0; valid 0.0 to 1.0.
*/
m_PcbSelectionVisibilityRatio = 1.0;
/**
* `m_SnapHysteresis` (advanced_config.h:750): the hysteresis, in screen
* pixels, around a snap anchor - a snap is taken inside the snap range less
* this and let go outside the range plus this.
* Setting name: "SnapHysteresis"; default 5; valid 0 to 100.
*/
m_SnapHysteresis = 5;
/**
* When true, strokes the triangulations in OpenGL
*/
m_DrawTriangulationOutlines = false;
/**
* Multiplier for the hole wall plating thickness when painting hole walls.
*/
m_HoleWallPaintingMultiplier = 1.5;
/**
* Hole wall plating thickness. Used to determine actual hole size from finish hole size.
*/
m_HoleWallThickness = 0.02; // IPC-6012 says 15-18um; Cadence says at least
// 0.020 for a Class 2 board and at least 0.025
// for Class 3.
/**
* Epsilon used in DRC to check for overlapping shapes and edges (mm).
* Setting name: "DRCEpsilon"
*/
m_DRCEpsilon = 0.0005; // 0.5um is small enough not to materially violate
// any constraints.
/**
* Sliver width tolerance for DRC.
*
* Units are mm.
*
* Setting name: "DRCSliverWidthTolerance"
* Valid values: 0.01 to 0.25
* Default value: 0.08
*/
m_SliverWidthTolerance = 0.08;
/**
* Sliver length tolerance for DRC.
*
* Units are mm.
*
* Setting name: "DRCSliverMinimumLength"
* Valid values: 1e-9 to 10
* Default value: 0.0008
*/
m_SliverMinimumLength = 0.0008;
/**
* Sliver angle to tolerance for DRC.
*
* Units are mm.
*
* Setting name: "DRCSliverAngleTolerance"
* Valid values: 1 to 90
* Default value: 20
*/
m_SliverAngleTolerance = 20.0;
/**
* When filling zones, we add an extra amount of clearance to each zone to ensure that
* rounding errors do not overrun minimum clearance distances.
*
* This is the extra clearance in mm.
*
* Setting name: "ExtraFillMargin"
* Valid values: 0 to 1
* Default value: 0.0005
*/
m_ExtraClearance = 0.0005;
/**
* Dump the zone filler's intermediate poly sets onto the inner copper layers.
*
* Setting name: "DebugZoneFiller"
* Default value: false
*/
m_DebugZoneFiller = false;
/**
* The simplification level VERTEX_SET uses when triangulating or connecting.
*
* Setting name: "TriangulateSimplificationLevel"
* Default value: 50
*/
m_TriangulateSimplificationLevel = 50;
/**
* Refill zones that overlap ones whose islands were removed, until the fills converge.
*
* Setting name: "ZoneFillIterativeRefill"
* Default value: true
*/
m_ZoneFillIterativeRefill = true;
/**
* Enable the minimum slot width check for creepage
*
* Setting name: "EnableCreepageSlot"
* Default value: false
*/
m_EnableCreepageSlot = false;
/**
* Minimum overlapping angle for which an arc is considered to be parallel
* to its paired arc.
*
* Setting name: "MinParallelAngle"
* Default value: 0.001
*/
m_MinParallelAngle = 0.001;
/**
* The maximum number of threads to use in the thread pool.
* Setting name: "MaximumThreads"
* Valid values: 0 to 500
* Default: 0 (auto-detect), i.e. `std::thread::hardware_concurrency()`
*/
m_MaximumThreads = 0;
/**
* When point-editing an arc by an endpoint while keeping the tangent at the
* other end, the derived radius is rejected once `|v2.y / (R - v2.x)|`
* exceeds this, so a near-degenerate drag cannot blow the radius up to
* overflow the geometry that draws it.
* Setting name: "DrawArcCenterMaxAngle"
* Default value: 50.0
*/
m_DrawArcCenterMaxAngle = 50.0;
/**
* How long (in milliseconds) `CONSTRUCTION_MANAGER` waits before a
* proposed batch of temporary construction geometry is accepted and shown,
* unless it is a persistent batch or the timeout is superseded first.
* Setting name: "ExtensionSnapTimeoutMs"; default 500.
*/
m_ExtensionSnapTimeoutMs = 500;
/**
* Enable snap anchors based on item line extensions.
* Setting name: "EnableExtensionSnaps"; default true (`advanced_config.cpp:312`).
*/
m_EnableExtensionSnaps = true;
/**
* If extension snaps are enabled, 'activate' items on hover, even if not
* near a snap point.
* Setting name: "ExtensionSnapActivateOnHover"; default true (`advanced_config.cpp:314`).
*/
m_ExtensionSnapActivateOnHover = true;
/**
* The drill mark size, in mm, the plotters use for "Small" drill marks.
* Setting name: "SmallDrillMarkSize"; default 0.35 (clamped 0.0 .. 3.0).
*/
m_SmallDrillMarkSize = 0.35;
/**
* The PDF Type 3 stroke font (pdf_stroke_font.cpp): the pen width as a
* fraction of the em when a text has none of its own, the glyph offsets in
* em, the pen multiplier for bold, and a scale on each glyph's advance.
* Setting names: "PDFStrokeFontWidthFactor" (.12), "PDFStrokeFontXOffset"
* (0.1), "PDFStrokeFontYOffset" (0.35), "PDFStrokeFontBoldMultiplier" (1.8),
* "PDFStrokeFontKerningFactor" (1.0).
*/
m_PDFStrokeFontWidthFactor = 0.12; // default 12% of EM
m_PDFStrokeFontXOffset = 0.1;
m_PDFStrokeFontYOffset = 0.35;
m_PDFStrokeFontBoldMultiplier = 1.8;
m_PDFStrokeFontKerningFactor = 1.0;
/**
* PADS text sizing: the fraction of a PADS text height that is KiCad's
* character height and width, for PCB ("PadsPcbTextHeightScale" 0.69,
* "PadsPcbTextWidthScale" 0.64) and schematic ("PadsSchTextHeightScale"
* 0.50, "PadsSchTextWidthScale" 0.46) imports.
*/
m_PadsPcbTextHeightScale = 0.69;
m_PadsPcbTextWidthScale = 0.64;
m_PadsSchTextHeightScale = 0.5;
m_PadsSchTextWidthScale = 0.46;
/**
* How far a PADS text's anchor sits from KiCad's, in nm.
* Setting name: "PadsTextAnchorOffsetNm"; default 350000.
*/
m_PadsTextAnchorOffsetNm = 350000;
/**
* The smallest size a non-KiCad board importer gives an object, in nm.
* Setting name: "PcbImportMinObjectSizeNm"; default 1000.
*/
m_PcbImportMinObjectSizeNm = 1000;
/**
* Whether the fields of symbols the EAGLE schematic importer creates may be autoplaced.
* Setting name: "EagleImportFieldsCanAutoplace"; default true (advanced_config.cpp:352).
*/
m_EagleImportFieldsCanAutoplace = true;
/**
* The thinnest pen a plot (and the schematic's render settings) draws, in mm: 1 pixel at
* 1200 dpi. Setting name: "MinPlotPenWidth"; default 0.0212 (advanced_config.cpp:256).
*/
m_MinPlotPenWidth = 0.0212;
/**
* The line width of the excluded-from-simulation marker, in mils.
* Setting name: "ExcludeFromSimulationLineWidth"; default 25 (advanced_config.cpp:326).
*/
m_ExcludeFromSimulationLineWidth = 25;
private static s_cfg: ADVANCED_CFG | null = null;
/** Get the singleton instance's config, which is shared by all consumers. */
static GetCfg(): ADVANCED_CFG {
if (!ADVANCED_CFG.s_cfg) ADVANCED_CFG.s_cfg = new ADVANCED_CFG();
return ADVANCED_CFG.s_cfg;
}
}