Files
Jerry 371c8c76c4 DECISION: Rebuild LH20 exterior proportions before refitting actuators
DECISION: Build a separate R0.3 exterior and articulated layout with slender fingers, rounded crowns, exposed knuckle openings and a waisted palm. Treat the older internal drive design as pending refit rather than claiming it fits the smaller envelope.

WHY: In the 2026-11-16 hand-design discussion, the user twice rejected the previous model as visually crude and supplied a WUJI product screenshot. More fasteners and edge treatments did not address the thick segmented silhouette. The second critique explicitly prioritized external form. design-docs/lh20-r03-exterior-first.md records this change in sequence, the geometry iterations and the qualification boundary. The new widths are original design inputs, not dimensions measured from the photograph.

ALTERNATIVE CONSIDERED AND REJECTED: Continuing cosmetic edits on the previous bulky layout, presenting generated images as CAD evidence, or relabelling official geometry would fail the user's request for a better actual model. The smaller exterior cannot honestly inherit the previous drive integration claims.

WHAT CHANGES: Add independent parametric finger and palm modules, a solved 20-axis assembly, exact neutral-pose BREP checks, real CAD previews, checked STEP export and a visual-only URDF. Package the exchange files with relative meshes and hashes in a new Downloads folder while preserving older work. Document the pending internal refit, full-motion assessment and manufacturing engineering.

Checked: Single finger and whole-hand geometry, positive volumes, assembly constraints and neutral exact interference checks passed. STEP reimport retained 146 solids with relative volume error 2.45e-7. URDF has 21 links, 20 joints and 89 referenced meshes. Reviewed front, back and oblique CAD views; packaging verified 99 delivered files and ZIP contents. Python compilation and staged whitespace checks passed. No claim of full-motion, actuator, manufacturing or hardware validation.

Co-Authored-By: Codex <noreply@openai.com>
2026-11-16 20:40:42 +08:00
..

LH20 R0.3 外形重设计

本版按用户提供的 WUJI 外观图重新建立整体比例。旧版过粗的管段式指节改为较细的圆角承力边框、独立关节开口与轴端;指尖改为连续圆顶,掌部收腰,并增加虎口过渡与独立表面分件。

这是新的外形 CAD 与 20 轴装配布局。R0.1/R0.2 的驱动模块尚未适配到这个更小的空间,不能把两版视为已完成的同一套内外装配。

查看与重建

入口:http://127.0.0.1:8764/hands/codex;独立编辑器:http://127.0.0.1:8785/。旧版继续保留在原目录和端口 8765。

在仓库根目录运行:

.venv/bin/python examples/lh20_hand_r03/build.py finger
.venv/bin/python examples/lh20_hand_r03/verify.py --name finger --collisions
.venv/bin/python examples/lh20_hand_r03/build.py hand
.venv/bin/python examples/lh20_hand_r03/verify.py --collisions
.venv/bin/python examples/lh20_hand_r03/render.py
.venv/bin/python examples/lh20_hand_r03/render.py --name finger
.venv/bin/python examples/lh20_hand_r03/export.py

out/hand_overview.png 是实际 CAD 的掌面、背面与斜视图;单视图为 hand_front.png、hand_back.png、hand_profile.png。hand.scadpkg 是原生装配包,参数与分件来自本目录源码。

导出与检查范围

  • LH20_R03_exterior.step:新外形的实体装配。
  • LH20_R03_exterior.urdf 与 meshes/:同源外观和关节树,用于查看与运动学接口。没有虚构电机参数、惯量、碰撞包络或传动;effort/velocity 为零,不用于驱动性能仿真。显示角度区间属于待验证设计范围。
  • hand_check.json:独立实体有效性、正体积、装配约束和展开姿态精确干涉记录,重叠阈值 0.01 mm³。历史失败记录在 out/history/。
  • exchange_check.json:STEP 重读实体数与体积、URDF 链接数量和网格引用检查。

当前检查限定于记录中的具体姿态。编辑角度或使用 build.py hand --pose relaxed 后,需对相应包重新运行检查;不承诺全关节范围无碰撞。

2026-11-16 本轮结果:146 个实体的有效性、正体积、装配约束及展开姿态干涉检查通过;STEP 回读保留 146 个实体,汇总体积相对误差约 2.45×10⁻⁷;URDF 为 21 个 link、20 个关节、89 个可解析网格。三个检查和预览记录绑定同一原生包 SHA-256,而非以另一个版本的结果替代。

将检查过的交换文件、预览与中文说明打包到新的目录(不会覆盖现有交付):

.venv/bin/python examples/lh20_hand_r03/package.py ~/Downloads/LH20_Codex_R03_外形重设计_2026-11-16

脚本校验原生包、STEP、URDF 与预览摘要,复制所有相对网格引用,写入文件摘要清单,并对 ZIP 解压后的每个交付文件重新校验。

结构分工与后续边界

parts/links.py 定义指节外壳、接触片、轴端及固定件;parts/palm.py 定义掌部连续曲面、检修盖与腕部;finger.py 与 hand.py 组合并求解装配。所有零件保持闭合实体。圆顶由定半径圆角形成,避免插值截面造成的指尖鼓包。

驱动选型与传动空间、承力截面、真实轴向固定、壁厚/刚度、公差、线缆与电子件、全运动包络和实物性能仍需完成。本阶段先解决用户要求的外形质量,不能把渲染外观当成可制造或可抓取的证明。