237702c7a8
- rename every numbered example (04/08/10/11/7ep scripts, 12/16/20/21 dirs) to clean names; each example now writes artifacts to its own out/ folder - examples/README rewritten as a category index (part / assembly / reverse engineering / FEM); stale run_examples.py reference removed - flange_plate gains the quickstart FTC part (model.py + external verify.py + README); u_link/ap242/flange demo builders read the new asset paths - ap242_gmsh_volume_mesh gains render_views.py for the demo gallery fix(artifacts): round-trip-stable geometry fingerprint bounds AddOptimal bounds wobble by one shape-tolerance quantum between a fresh shape and the same shape read back from BRep bytes, so definitions sitting on a quantization cell edge failed every package re-validation. Quantize bounds at a fixed 1e-4 mm grid, far coarser than the wobble; full suite green (1503 passed). Stored packages captured before this change must be recaptured.
六孔法兰盘(FTC 单零件示例)
最简 Feature Tree Convention 示例:一个 @scad.part 单零件,纯几何体素
(geometry tier 第 3 类:形状完全含于基本体素),QL 选边做圆角,外置脚本验证。
形状 brief(尺寸为演示假设值,mm)
| 特征 | 参数 | 值 |
|---|---|---|
| 法兰盘 | 外径 × 厚 | Ø100 × 10(z 0..10) |
| 中心凸台 | 外径 × 顶高 | Ø55,顶面 z=30 |
| 中心孔 | 通孔直径 | Ø30 |
| 螺栓孔 | 数量 × 孔径 × 分布圆 | 6 × Ø11 × PCD Ø78 |
| 圆角 | 凸台根部 R3;盘外缘上下 R2 |
基准:原点在盘底中心,+Z 为盘厚方向。可行性链(参数守卫在源码内): 孔边到外缘轮辐 50−39−5.5=5.5 ≥ R2;孔边到根部圆角 39−5.5=33.5 ≥ 27.5+3。
特征树
flange-disc (build) -> hub-boss (add) -> center-bore (subtract)
-> bolt-holes (subtract) -> hub-root-fillet (modify) -> rim-fillet (modify)
运行
uv run python examples/flange_plate/model.py # 建模 + scadpkg/step/PNG
uv run python examples/flange_plate/verify.py # 外置验证(断言,非目检)
产物写入 examples/out/flange_plate/。
验证契约(verify.py)
- 单实体、体积与解析值偏差 < 1%;
- QL:Ø11 圆孔圆缘边 12 条(6 孔 × 上下),孔心距轴 = PCD/2;
- 中心孔 Ø30(圆缘周长 2π·15)上下各一条;
- 圆角面 TORUS 恰 3 张(根部 1 + 外缘 2);
.scadpkg回读校验、.step非空。