Version 2.1.5: Fix GLAD loading on Linux, experimental multi-CCD.

PiperOrigin-RevId: 441482552
Change-Id: I16b7ba81cd81ca2293a9a12bfa08a40ab24c70bb

doc/APIreference.rst

@@ -111,7 +111,10 @@ mjtEnableBit
        mjENBL_FWDINV       = 1<<2,     // compare forward and inverse dynamics
        mjENBL_SENSORNOISE  = 1<<3,     // add noise to sensor data
 
-       mjNENABLE           = 4         // number of enable flags
+                                       // experimental features:
+       mjENBL_MULTICCD     = 1<<30,    // multi-point convex collision detection
+
+       mjNENABLE           = 5         // number of enable flags
    } mjtEnableBit;
 
 | Defined in `mjmodel.h <https://github.com/deepmind/mujoco/blob/main/include/mjmodel.h>`_
@@ -2898,13 +2901,13 @@ mjcb_control
 
    extern mjfGeneric mjcb_control;
 
-| This is the most commonly used callback. It implements a control law, by writing in the vector of controls
+This is the most commonly used callback. It implements a control law, by writing in the vector of controls
-  ``mjData.ctrl``. It can also write in ``mjData.qfrc_applied`` and ``mjData.xfrc_applied``. The values written in these
+``mjData.ctrl``. It can also write in ``mjData.qfrc_applied`` and ``mjData.xfrc_applied``. The values written in these
-  vectors can depend on position, velocity and all other quantities derived from them, but cannot depend on contact
+vectors can depend on position, velocity and all other quantities derived from them, but cannot depend on contact forces
-  forces and other quantities that are computed after the control is specified. If the callback accesses the latter
+and other quantities that are computed after the control is specified. If the callback accesses the latter fields, their
-  fields, their values do not correspond to the current time step.
+values do not correspond to the current time step.
 
-| The control callback is called from within :ref:`mj_forward` and :ref:`mj_step`, just before the controls and applied
+The control callback is called from within :ref:`mj_forward` and :ref:`mj_step`, just before the controls and applied
 forces are needed. When using the RK integrator, it will be called 4 times per step. The alternative way of specifying
 controls and applied forces is to set them before ``mj_step``, or use ``mj_step1`` and ``mj_step2``. The latter approach
 allows setting the controls after the position and velocity computations have been performed by ``mj_step1``, allowing
@@ -3411,7 +3414,7 @@ Print internal XML schema as plain text or HTML, with style-padding or ``&nbsp;`
 Main simulation
 ^^^^^^^^^^^^^^^
 
-| These are the main entry points to the simulator. Most users will only need to call ``mj_step``, which computes
+These are the main entry points to the simulator. Most users will only need to call ``mj_step``, which computes
 everything and advanced the simulation state by one time step. Controls and applied forces must either be set in advance
 (in mjData.ctrl, qfrc_applied and xfrc_applied), or a control callback mjcb_control must be installed which will be
 called just before the controls and applied forces are needed. Alternatively, one can use ``mj_step1`` and ``mj_step2``
@@ -3419,21 +3422,21 @@ which break down the simulation pipeline into computations that are executed bef
 in this way one can set controls that depend on the results from ``mj_step1``. Keep in mind though that the RK4 solver
 does not work with mj_step1/2.
 
-| mj_forward performs the same computations as ``mj_step`` but without the integration. It is useful after loading or
+mj_forward performs the same computations as ``mj_step`` but without the integration. It is useful after loading or
-  resetting a model (to put the entire mjData in a valid state), and also for out-of-order computations that involve
+resetting a model (to put the entire mjData in a valid state), and also for out-of-order computations that involve
-  sampling or finite-difference approximations.
+sampling or finite-difference approximations.
 
-| mj_inverse runs the inverse dynamics, and writes its output in mjData.qfrc_inverse. Note that mjData.qacc must be set
+mj_inverse runs the inverse dynamics, and writes its output in mjData.qfrc_inverse. Note that mjData.qacc must be set
-  before calling this function. Given the state (qpos, qvel, act), mj_forward maps from force to acceleration, while
+before calling this function. Given the state (qpos, qvel, act), mj_forward maps from force to acceleration, while
-  mj_inverse maps from acceleration to force. Mathematically these functions are inverse of each other, but numerically
+mj_inverse maps from acceleration to force. Mathematically these functions are inverse of each other, but numerically
-  this may not always be the case because the forward dynamics rely on a constraint optimization algorithm which is
+this may not always be the case because the forward dynamics rely on a constraint optimization algorithm which is
-  usually terminated early. The difference between the results of forward and inverse dynamics can be computed with the
+usually terminated early. The difference between the results of forward and inverse dynamics can be computed with the
-  function :ref:`mj_compareFwdInv`, which can be though of as another solver accuracy check (as well as a general sanity
+function :ref:`mj_compareFwdInv`, which can be though of as another solver accuracy check (as well as a general sanity
-  check).
+check).
 
-| The skip version of mj_forward and mj_inverse are useful for example when qpos was unchanged but qvel was changed
+The skip version of mj_forward and mj_inverse are useful for example when qpos was unchanged but qvel was changed
-  (usually in the context of finite differencing). Then there is no point repeating the computations that only depend on
+(usually in the context of finite differencing). Then there is no point repeating the computations that only depend on
-  qpos. Calling the dynamics with skipstage = mjSTAGE_POS will achieve these savings.
+qpos. Calling the dynamics with skipstage = mjSTAGE_POS will achieve these savings.
 
 .. _mj_step:
 

doc/XMLreference.rst

@@ -99,7 +99,7 @@ XML schema
 |                          |    |    +-------------------------+-------------------------+-------------------------+ |
 |                          |    |    | :at:`override`          | :at:`energy`            | :at:`fwdinv`            | |
 |                          |    |    +-------------------------+-------------------------+-------------------------+ |
-|                          |    |    | :at:`sensornoise`       |                         |                         | |
+|                          |    |    | :at:`sensornoise`       | :at:`multiccd`          |                         | |
 |                          |    |    +-------------------------+-------------------------+-------------------------+ |
 +--------------------------+----+------------------------------------------------------------------------------------+
 | |_|:el:`size`            | \* | .. table::                                                                         |
@@ -1791,11 +1791,19 @@ from its default.
    This flag enables the simulation of sensor noise. When disabled (which is the default) noise is not added to
    sensordata, even if the sensors specify non-zero noise amplitudes. When enabled, zero-mean Gaussian noise is added to
    the underlying deterministic sensor data. Its standard deviation is determined by the noise parameter of each sensor.
+:at:`multiccd`: :at-val:`[disable, enable], "disable"`             **(experimental feature)**
+   This flag enables multiple-contact collision detection for geom pairs that use the general-purpose convex-convex
+   collider based on :ref:`libccd <coChecking>` e.g., mesh-mesh collisions. This can be useful when the contacting geoms
+   have a flat surface, and the single contact point generated by the convex-convex collider cannot accurately capture
+   the surface contact, leading to instabilities that typically manifest as sliding or wobbling. Multiple contact points
+   are found by rotating the two geoms by ±1e-3 radians around the tangential axes and re-running the collision
+   function. If a new contact is detected it is added, allowing for up to 4 additional contact points. This feature is
+   currently considered experimental, and both the behavior and the way it is activated may change in the future.
 
 .. _size:
 
 **size** (*)
-~~~~~~~~~~~~~~~~~~~~~~~~~
+~~~~~~~~~~~~
 
 This element specifies size parameters that cannot be inferred from the number of elements in the model. Unlike the
 fields of mjOption which can be modified at runtime, sizes are structural parameters and should not be modified after

doc/changelog.rst

@@ -2,17 +2,38 @@
 Changelog
 =========
 
-Version 2.1.4 (Apr. 4, 2022)
+Version 2.1.5 (Apr. 13, 2022)
 -----------------------------
 
 General
 ^^^^^^^
 
+1. Added an experimental feature: multi-contact convex collision detection, activated by an enable flag. See full
+   description :ref:`here <option-flag>`.
+
+Bug fixes
+^^^^^^^^^
+
+2. GLAD initialization logic on Linux now calls ``dlopen`` to load a GL platform dynamic library if a
+   ``*GetProcAddress`` function is not already present in the process' global symbol table. In particular, processes
+   that use GLFW to set up a rendering context that are not explicitly linked against ``libGLX.so`` (this applies to the
+   Python interpreter, for example) will now work correctly rather than fail with a ``gladLoadGL`` error when
+   ``mjr_makeContext`` is called.
+
+#. In the Python bindings, named indexers for scalar fields (e.g. the ``ctrl`` field for actuators) now return a NumPy
+   array of shape ``(1,)`` rather than ``()``. This allows values to be assigned to these fields more straightforwardly.
+
+Version 2.1.4 (Apr. 4, 2022)
+----------------------------
+
+General
+^^^^^^^
+
 1. MuJoCo now uses GLAD to manage OpenGL API access instead of GLEW. On Linux, there is no longer a need to link against
    different GL wrangling libraries depending on whether GLX, EGL, or OSMesa is being used. Instead, users can simply
    use GLX, EGL, or OSMesa to create a GL context and ``mjr_makeContext`` will detect which one is being used.
 
-#. Add visualisation for contact frames. This is useful when writing or modifying collision functions, when the actual
+#. Added visualisation for contact frames. This is useful when writing or modifying collision functions, when the actual
    direction of the x and y axes of a contact can be important.
 
 Binary build
@@ -26,13 +47,13 @@ Binary build
 Simulate
 ^^^^^^^^
 
-4. Fix a bug in simulate where pressing '[' or ']' when a model is not loaded causes a crash.
+4. Fixed a bug in simulate where pressing '[' or ']' when a model is not loaded causes a crash.
 
-#. Contact frame visualisation is added to the Simulate GUI.
+#. Contact frame visualisation was added to the Simulate GUI.
 
-#. Rename "set key", "reset to key" to "save key" and "load key", respectively.
+#. Renamed "set key", "reset to key" to "save key" and "load key", respectively.
 
-#. Change bindings of F6 and F7 from the not very useful "vertical sync" and "busy wait" to the more useful cycling of
+#. Changed bindings of F6 and F7 from the not very useful "vertical sync" and "busy wait" to the more useful cycling of
    frames and labels.
 
 Bug fixes
@@ -40,7 +61,7 @@ Bug fixes
 
 8. ``mj_resetData`` zeroes out the ``solver_nnz`` field.
 
-#. Remove a special branch in ``mju_quat2mat`` for unit quaternions. Previously, ``mju_quat2mat`` skipped all
+#. Removed a special branch in ``mju_quat2mat`` for unit quaternions. Previously, ``mju_quat2mat`` skipped all
    computation if the real part of the quaternion equals 1.0. For very small angles (e.g. when finite differencing), the
    cosine can evaluate to exactly 1.0 at double precision while the sine is still nonzero.
 
@@ -57,13 +78,13 @@ General
 Python bindings
 ^^^^^^^^^^^^^^^
 
-3. Add a ``free()`` method to ``MjrContext``.
+3. Added a ``free()`` method to ``MjrContext``.
 #. Enums now support arithmetic and bitwise operations with numbers.
 
 Bug fixes
 ^^^^^^^^^
 
-5. Fix rendering bug for planes, introduced in 2.1.2. This broke maze environments in
+5. Fixed rendering bug for planes, introduced in 2.1.2. This broke maze environments in
    `dm_control <https://github.com/deepmind/dm_control>`_.
 
 

doc/overview.rst

@@ -354,15 +354,15 @@ purpose of including an asset is to reference it, and referencing can only be do
 undefined.
 
 Mesh
-   MuJoCo can load triangulated meshes from binary STL files. Software such as `MeshLab <https://www.meshlab.net/>`__
+
-   can be used to convert from other formats. While any collection of triangles can be loaded and visualized as a mesh,
+   MuJoCo can load triangulated meshes from OBJ files and binary STL. Software such as `MeshLab
-   the collision detector works with the convex hull. There are compile-time options for scaling the mesh, as well as
+   <https://www.meshlab.net/>`__ can be used to convert from other formats. While any collection of triangles can be
-   fitting a primitive geometric shape to it. The mesh can also be used to automatically infer inertial properties - by
+   loaded and visualized as a mesh, the collision detector works with the convex hull. There are compile-time options
-   treating it as a union of triangular pyramids and combining their masses and inertias. Note that the STL format does
+   for scaling the mesh, as well as fitting a primitive geometric shape to it. The mesh can also be used to
-   not support color; some software packages write color information in unused fields but this is not consistent.
+   automatically infer inertial properties -- by treating it as a union of triangular pyramids and combining their
-   Instead the mesh is colored using the material properties of the referencing geom. In contrast, all spatial
+   masses and inertias. Note that meshes have no color, instead the mesh is colored using the material properties of the
-   properties are determined by the mesh data. MuJoCo supports a custom binary file format that can additionally specify
+   referencing geom. In contrast, all spatial properties are determined by the mesh data. MuJoCo supports both OBJ and a
-   normals and texture coordinates. Meshes can also be embedded directly in the XML.
+   custom binary file format for normals and texture coordinates. Meshes can also be embedded directly in the XML.
 
 Skin
    Skinned meshes (or skins) are meshes whose shape can deform at runtime. Their vertices are attached to rigid bodies
@@ -593,6 +593,23 @@ section is to preemptively clarify the aspects that are most likely to be confus
 and a tutorial on selected topics. We will need to refer to material covered later in the documentation, but
 nevertheless the text below is as self-contained and introductory as possible.
 
+.. _Divergence:
+
+Divergence
+~~~~~~~~~~
+
+Divergence of a simulation happens when elements of the state tend quickly to infinity. In MuJoCo this is usually
+manifested as an :ref:`mjWARN_BADQACC<mjtwarning>` warning. Divergence is endemic to all physics simulation and is not
+necessarily indicative of a bad model or bug in the simulator, but is rather a hint that the timestep  is too large for
+the given choice of integrator. In physics simulation there is always a tension between speed (large time steps) and
+stabillity (small timesteps). A model which is well-tuned for speed has the largest possible timestep that does not
+diverge, which usually means that it *can* be made to diverge under extreme conditions. In that sense *rare* cases of
+divergence can actually be indicative of a well-tuned model. In all cases it should be possible to prevent divergence by
+reducing the timestep and/or switching to a more stable :ref:`integrator <geIntegration>`. If that fails, the culprit is
+different. For example in models where bodies are initialized in penetration, large repulsive forces could push them
+away and cause divergence.
+
+
 .. _Units:
 
 Units are undefined

doc/programming.rst

@@ -19,9 +19,9 @@ library:
 
      Windows:  mujoco.dll  (stub library: mujoco.lib)
 
-     Linux:    mujoco.so.2.1.4
+     Linux:    mujoco.so.2.1.5
 
-     macOS:    mujoco.2.1.4.dylib
+     macOS:    mujoco.2.1.5.dylib
 
 Even though MuJoCo is a single dynamic library with unified C API, it contains several modules, some of which are
 implemented in C++. We have taken advantage of the convenience of C++ for functionality that is used before the

doc/unity.rst

@@ -29,14 +29,14 @@ _____
 
 The MuJoCo app needs to be run at least once before the native library can be used, in order to register the library as
 a trusted binary. Then, copy the dynamic library file from
-``/Applications/MuJoCo.app/Contents/Frameworks/MuJoCo.framework/Versions/Current/libmujoco.2.1.4.dylib`` (it can be
+``/Applications/MuJoCo.app/Contents/Frameworks/MuJoCo.framework/Versions/Current/libmujoco.2.1.5.dylib`` (it can be
 found by browsing the contents of ``MuJoCo.app``) and rename it as ``mujoco.dylib``.
 
 Linux
 _____
 
 Expand the ``tar.gz`` archive to ``~/.mujoco``. Then copy the dynamic library from
-``~/.mujoco/mujoco-2.1.4/lib/libmujoco.so.2.1.4`` and rename it as ``libmujoco.so``.
+``~/.mujoco/mujoco-2.1.5/lib/libmujoco.so.2.1.5`` and rename it as ``libmujoco.so``.
 
 Windows
 _______

include/mjmodel.h

@@ -69,7 +69,10 @@ typedef enum mjtEnableBit_ {      // enable optional feature bitflags
   mjENBL_FWDINV       = 1<<2,     // record solver statistics
   mjENBL_SENSORNOISE  = 1<<3,     // add noise to sensor data
 
-  mjNENABLE           = 4         // number of enable flags
+                                  // experimental features:
+  mjENBL_MULTICCD     = 1<<30,    // multi-point convex collision detection
+
+  mjNENABLE           = 5         // number of enable flags
 } mjtEnableBit;
 
 

include/mujoco.h

@@ -24,7 +24,7 @@ extern "C" {
 #endif
 
 // header version; should match the library version as returned by mj_version()
-#define mjVERSION_HEADER 214
+#define mjVERSION_HEADER 215
 
 // needed to define size_t, fabs and log10
 #include "stdlib.h"

introspect/enums.py

@@ -51,7 +51,8 @@ ENUMS: Mapping[str, EnumDecl] = dict([
              ('mjENBL_ENERGY', 2),
              ('mjENBL_FWDINV', 4),
              ('mjENBL_SENSORNOISE', 8),
-             ('mjNENABLE', 4),
+             ('mjENBL_MULTICCD', 1073741824),
+             ('mjNENABLE', 5),
          ]),
      )),
     ('mjtJoint',

introspect/enums_test.py

@@ -42,7 +42,8 @@ class EnumsTest(absltest.TestCase):
                                           ('mjENBL_ENERGY', 1<<1),
                                           ('mjENBL_FWDINV', 1<<2),
                                           ('mjENBL_SENSORNOISE', 1<<3),
-                                          ('mjNENABLE', 4)))
+                                          ('mjENBL_MULTICCD', 1<<30),
+                                          ('mjNENABLE', 5)))
 
   # values mostly increment by one with occasional overrides
   def test_mjtGeom(self):  # pylint: disable=invalid-name

python/mujoco/CMakeLists.txt

@@ -55,7 +55,7 @@ include(FindOrFetch)
 
 # ==================== MUJOCO LIBRARY ==========================================
 if(NOT TARGET mujoco)
-  find_library(MUJOCO_LIBRARY mujoco mujoco.2.1.4 HINTS ${MUJOCO_LIBRARY_DIR} REQUIRED)
+  find_library(MUJOCO_LIBRARY mujoco mujoco.2.1.5 HINTS ${MUJOCO_LIBRARY_DIR} REQUIRED)
   find_path(MUJOCO_INCLUDE mujoco.h HINTS ${MUJOCO_INCLUDE_DIR} REQUIRED)
   message("MuJoCo is at ${MUJOCO_LIBRARY}")
   message("MuJoCo headers are at ${MUJOCO_INCLUDE}")

python/mujoco/bindings_test.py

@@ -660,7 +660,7 @@ Euler integrator, semi-implicit in velocity.
     self.assertEqual(mujoco.mjtEnableBit.mjENBL_ENERGY, 1<<1)
     self.assertEqual(mujoco.mjtEnableBit.mjENBL_FWDINV, 1<<2)
     self.assertEqual(mujoco.mjtEnableBit.mjENBL_SENSORNOISE, 1<<3)
-    self.assertEqual(mujoco.mjtEnableBit.mjNENABLE, 4)
+    self.assertEqual(mujoco.mjtEnableBit.mjNENABLE, 5)
     self.assertEqual(mujoco.mjtGeom.mjGEOM_PLANE, 0)
     self.assertEqual(mujoco.mjtGeom.mjGEOM_HFIELD, 1)
     self.assertEqual(mujoco.mjtGeom.mjGEOM_SPHERE, 2)
@@ -672,11 +672,6 @@ Euler integrator, semi-implicit in velocity.
   def test_enum_from_int(self):
     self.assertEqual(mujoco.mjtJoint.mjJNT_FREE, mujoco.mjtJoint(0))
     self.assertEqual(mujoco.mjtGeom.mjGEOM_ARROW, mujoco.mjtGeom(value=100))
-    # mjENABLE_FWDINV and mjNENABLE have the same int value. Default to the
-    # first defined one.
-    self.assertEqual(
-        mujoco.mjtEnableBit.mjENBL_FWDINV,
-        mujoco.mjtEnableBit(mujoco.mjtEnableBit.mjNENABLE.value))
     with self.assertRaises(ValueError):
       mujoco.mjtJoint(1000)
     with self.assertRaises(ValueError):

python/setup.py

@@ -30,7 +30,7 @@ from setuptools import find_packages
 from setuptools import setup
 from setuptools.command import build_ext
 
-__version__ = '2.1.4'
+__version__ = '2.1.5'
 
 MUJOCO_CMAKE = 'MUJOCO_CMAKE'
 MUJOCO_CMAKE_ARGS = 'MUJOCO_CMAKE_ARGS'

sample/Makefile

@@ -5,12 +5,12 @@
 COMMON=-O2 -I../include -L../lib -std=c++11 -pthread -Wl,-no-as-needed -Wl,-rpath,'$$ORIGIN'/../lib
 
 all:
-	$(CXX) $(COMMON) testxml.cc    -lmujoco             -o ../bin/testxml
+	$(CXX) $(COMMON) testxml.cc            -lmujoco          -o ../bin/testxml
-	$(CXX) $(COMMON) testspeed.cc  -lmujoco             -o ../bin/testspeed
+	$(CXX) $(COMMON) testspeed.cc          -lmujoco          -o ../bin/testspeed
-	$(CXX) $(COMMON) compile.cc    -lmujoco             -o ../bin/compile
+	$(CXX) $(COMMON) compile.cc            -lmujoco          -o ../bin/compile
-	$(CXX) $(COMMON) derivative.cc -lmujoco -fopenmp    -o ../bin/derivative
+	$(CXX) $(COMMON) derivative.cc         -lmujoco -fopenmp -o ../bin/derivative
-	$(CXX) $(COMMON) basic.cc      -lmujoco -lGL -lglfw -o ../bin/basic
+	$(CXX) $(COMMON) basic.cc              -lmujoco -lglfw   -o ../bin/basic
-	$(CXX) $(COMMON) record.cc     -lmujoco -lGL -lglfw -o ../bin/record
+	$(CXX) $(COMMON) record.cc             -lmujoco -lglfw   -o ../bin/record
 	$(CC) -c -O2 -I../include uitools.c
-	$(CXX) $(COMMON) uitools.o simulate.cc -lmujoco -lGL -lglfw -o ../bin/simulate
+	$(CXX) $(COMMON) uitools.o simulate.cc -lmujoco -lglfw   -o ../bin/simulate
 	rm *.o

sample/Makefile.macos

@@ -12,12 +12,12 @@ CFLAGS=-O2 -I$(MUJOCO_INCLUDEDIR) -I$(HOMEBREW)/include -pthread
 ALLFLAGS=$(CFLAGS) -L$(MUJOCO_LIBDIR) -L$(HOMEBREW)/lib -std=c++11 -stdlib=libc++ -Wl,-rpath,/Applications/MuJoCo.app/Contents/Frameworks
 
 all:
-	clang++ $(ALLFLAGS) testxml.cc    -lmujoco.2.1.4        -o testxml
+	clang++ $(ALLFLAGS) testxml.cc            -lmujoco.2.1.5        -o testxml
-	clang++ $(ALLFLAGS) testspeed.cc  -lmujoco.2.1.4        -o testspeed
+	clang++ $(ALLFLAGS) testspeed.cc          -lmujoco.2.1.5        -o testspeed
-	clang++ $(ALLFLAGS) compile.cc    -lmujoco.2.1.4        -o compile
+	clang++ $(ALLFLAGS) compile.cc            -lmujoco.2.1.5        -o compile
-	clang++ $(ALLFLAGS) derivative.cc -lmujoco.2.1.4        -o derivative
+	clang++ $(ALLFLAGS) derivative.cc         -lmujoco.2.1.5        -o derivative
-	clang++ $(ALLFLAGS) basic.cc      -lmujoco.2.1.4 -lglfw -o basic
+	clang++ $(ALLFLAGS) basic.cc              -lmujoco.2.1.5 -lglfw -o basic
-	clang++ $(ALLFLAGS) record.cc     -lmujoco.2.1.4 -lglfw -o record
+	clang++ $(ALLFLAGS) record.cc             -lmujoco.2.1.5 -lglfw -o record
-	clang -c $(CFLAGS) uitools.c
+	clang -c $(CFLAGS)  uitools.c
-	clang++ $(ALLFLAGS) uitools.o simulate.cc -lmujoco.2.1.4 -lglfw -o simulate
+	clang++ $(ALLFLAGS) uitools.o simulate.cc -lmujoco.2.1.5 -lglfw -o simulate
 	rm *.o

sample/Makefile.windows

@@ -3,17 +3,17 @@
 # from https://github.com/glfw/glfw/releases, and copy files as follows:
 # - Copy the entire `include/GLFW` subdirectory to `mujoco/include/GLFW`.
 # - Copy glfw3dll.lib from the subdirectory corresponding into your compiler
-#   choice to `mujoco/lib/glfw3.lib`.
+#   choice to `mujoco/lib/glfw3dll.lib`.
 # - Copy glfw3.dll from the same subdirectory into `mujoco/bin/glfw3.dll`.
 
 COMMON=/O2 /MT /EHsc /arch:AVX /I../include /Fe../bin/
 
 all:
-	cl $(COMMON) testxml.cc                 ../lib/mujoco.lib
+	cl $(COMMON) testxml.cc                                ../lib/mujoco.lib
-	cl $(COMMON) testspeed.cc               ../lib/mujoco.lib
+	cl $(COMMON) testspeed.cc                              ../lib/mujoco.lib
-	cl $(COMMON) compile.cc                 ../lib/mujoco.lib
+	cl $(COMMON) compile.cc                                ../lib/mujoco.lib
-	cl $(COMMON) derivative.cc /openmp      ../lib/mujoco.lib
+	cl $(COMMON) derivative.cc /openmp                     ../lib/mujoco.lib
-	cl $(COMMON) basic.cc ../lib/glfw3.lib  ../lib/mujoco.lib
+	cl $(COMMON) basic.cc              ../lib/glfw3dll.lib ../lib/mujoco.lib
-	cl $(COMMON) record.cc ../lib/glfw3.lib ../lib/mujoco.lib
+	cl $(COMMON) record.cc             ../lib/glfw3dll.lib ../lib/mujoco.lib
-	cl $(COMMON) simulate.cc uitools.c ../lib/glfw3.lib ../lib/mujoco.lib
+	cl $(COMMON) simulate.cc uitools.c ../lib/glfw3dll.lib ../lib/mujoco.lib
 	del *.obj

unity/Runtime/Bindings/MujocoBinaryRetriever.cs

@@ -35,7 +35,7 @@ public class MujocoBinaryRetriever {
       if (AssetDatabase.LoadMainAssetAtPath(mujocoPath + "/mujoco.dylib") == null) {
         File.Copy(
             "/Applications/MuJoCo.app/Contents/Frameworks" +
-            "/MuJoCo.framework/Versions/Current/libmujoco.2.1.4.dylib",
+            "/MuJoCo.framework/Versions/Current/libmujoco.2.1.5.dylib",
             mujocoPath + "/mujoco.dylib");
         AssetDatabase.Refresh();
       }
@@ -43,7 +43,7 @@ public class MujocoBinaryRetriever {
       if (AssetDatabase.LoadMainAssetAtPath(mujocoPath + "/libmujoco.so") == null) {
         File.Copy(
             Environment.GetFolderPath(Environment.SpecialFolder.UserProfile) +
-            "/.mujoco/mujoco-2.1.4/lib/libmujoco.so.2.1.4",
+            "/.mujoco/mujoco-2.1.5/lib/libmujoco.so.2.1.5",
             mujocoPath + "/libmujoco.so");
         AssetDatabase.Refresh();
       }

unity/Runtime/Bindings/MujocoBindings.cs

@@ -83,7 +83,7 @@ public const int mjMAXOVERLAY = 500;
 public const int mjMAXLINE = 100;
 public const int mjMAXLINEPNT = 1000;
 public const int mjMAXPLANEGRID = 200;
-public const int mjVERSION_HEADER = 214;
+public const int mjVERSION_HEADER = 215;
 
 
 // ------------------------------------Enums------------------------------------