Also unify warning options across Clang and GCC and fix minor issues that was surfaced by this.
PiperOrigin-RevId: 508619655
Change-Id: I59b777bf2dfea4422485670e2427c7d3f5cf6405
If given two non-decreasing values, `springlength` specifies a deadband for spring stiffness, inside of which the force is 0 and outside of which force behaves like a regular spring, with the setpoint corresponding to the nearest value. This can be used to create tendons whose limits are enforced by springs rather than constraints, which are cheaper and easier to analyse. See test/engine/testdata/tendon_springlength.xml example model.
Spring-limited spatial tendons whose lower range value is 0 are rendered as catenaries.
Fixes#520.
PiperOrigin-RevId: 484509706
Change-Id: I6698e94ee36168f52d501e83057559805e05172d
- Added new `cable` composite type:
* The `initial` parameter specifies the joint at the starting boundary: `free`, `ball`, or `none`.
* The boundary bodies are exposed with the names:`B_left` and `B_right`.
* The vertex initial positions can be specified directly in the XML with the parameter `vertex`.
* The orientation of the body frame **is** the orientation of the material frame of the curve.
- Added new `cable` passive force plugin:
* Twist and bending stiffness can be set separately with the parameters `twist` and `bend`.
* The stress-free configuration can be set to be the initial one or flat with the flag `flat`.
* New cable example showing the formation of plectoneme.
* New coil example.
* New belt example showing interaction between twist and anisotropy.
* Added test using cantilever exact solution.
PiperOrigin-RevId: 480033694
Change-Id: I491271bce8fccb185961477e903e5a72d172c8a3
Since fdbbc8bbe0, mju_mulQuat allows in-place computations.
There were a few places where the result was unnecessarily assigned to a temporary variable.
PiperOrigin-RevId: 477746005
Change-Id: I7351ef4796e7d70a4a54b930037bfaadee781f12
- Added `refsite` attribute to actuators with `site` transmission.
- Such actuators now have a well defined length and can be used for e.g., Cartesian end-effector control.
- Added example models and documentation describing the new feature.
PiperOrigin-RevId: 471561218
Change-Id: I538f09af9600d5c53992c4a9fed325648aab4fa3
- `anchor` determines the point of wrench application, in the frame of body2.
- `tfratio` scales applied torques relative to applied forces.
- Add visualisation of both anchor points to both weld and connect constraints.
- Add a test model showing how the new weld parameters behave.
PiperOrigin-RevId: 470021901
Change-Id: I3faba0e5dcab2e29ee81096f5ff71ff66d99758c
- `anchor` determines the point of wrench application, in the frame of body2.
- `tfratio` scales applied torques relative to applied forces.
- Add visualisation of both anchor points to both weld and connect constraints.
- Add a test model showing how the new weld parameters behave.
PiperOrigin-RevId: 469228149
Change-Id: I836b0791f10fb624607a12ef3c687da991c21789
- `anchor` determines the point of wrench application, in the frame of body2.
- `tfratio` scales applied torques relative to applied forces.
- Add visualisation of both anchor points to both weld and connect constraints.
- Add a test model showing how the new weld parameters behave.
PiperOrigin-RevId: 469190483
Change-Id: I20f6da85b09cd2c4c0b5d29eb8003eabb524e55e
- `distance` constraints were not very useful and increased the contact buffer within the constraint solver, violating a core design principle. Therefore they have been removed.
- The enum value `mjEQ_DISTANCE` is retained, but errors will be thrown in the parser and engine if these constraints are selected.
PiperOrigin-RevId: 467050101
Change-Id: Ie72a07e4fe338eea5107004a9fc0f5e47eb0c3b7
- Adhesion actuators using contact normals as force transmission mechanism.
- Related video: https://youtu.be/HdBue4MUZysCloses#229
PiperOrigin-RevId: 464389367
Change-Id: I9f69b3cd152d957e8f65870d208788463c036a6d
- Add `qH` and `qHDiagInv` to `mjData` to save factorized modified inertia.
- Add `mj_EulerSkip`, `mj_implicitSkip`, to `engine_forward.c`.
- Using the above functions, implement `mj_stepSkip` in `engine_derivative.c`.
- Add `mjd_stepFD` and `mjd_transitionFD` to `engine_derivative.c` to compute `mj_step` Jacobians.
- Exploit "Skip" functionality for speed.
- Correctly handle quaternion derivatives.
- Handle warmstarts and control limits.
PiperOrigin-RevId: 456584811
Change-Id: Iee8541f11e7b66feb8f431cb102d9bbe65461f79
Before this change, xipos[0,1,2] was only set to 0 by mj_resetData zeroing the entire buffer.
When using mj_resetDataDebug, the value would be wrong.
PiperOrigin-RevId: 450939814
Change-Id: I887dd977161c7d132a80b766db7be23350ffb50b
Kyle Bayes