The field now stores either an approximate or exact diagonal of the constraint matrix A, so the name is made more general.
PiperOrigin-RevId: 924244954
Change-Id: I62b2f76531fb88b7b3bf96e6769940197596702b
For example, `compile mujoco_menagerie/robotis_op3/scene.xml` now outputs
```
Compile 1 (cold cache):
total: 317.2 ms
assets: 284.8 ms (wall clock)
load: 616.1 ms
hull: 26.4 ms
poly: 137.8 ms
inert: 177.8 ms
bvh: 568.2 ms
octr: 1.6 ms
tex: 25.3 ms
other: 32.4 ms
Compile 2 (warm cache):
total: 79.9 ms
assets: 54.5 ms (wall clock)
load: 888.5 ms
hull: 0.0 ms
poly: 0.0 ms
inert: 0.0 ms
bvh: 0.0 ms
octr: 0.0 ms
tex: 21.4 ms
other: 25.3 ms
```
PiperOrigin-RevId: 917850214
Change-Id: Iaec86230bec0faf2e47820e20cbff61de5b2621e
with a preconditioned Conjugate Gradient (CG) solver that operates
on the full system matrix.
The previous approach extracted flex DOFs into a reduced banded system,
factored it separately, and overwrote the global solve. This required
precomputed bandwidth (makeFlexBandwidth), parent-joint detection,
coupling corrections, and a FlexInterpContext struct — and only worked
for standalone flex trees without parent joints.
The new CG solver uses the already-factored global system (M - h*qDeriv)
as a preconditioner and adds the flex stiffness contribution via
matrix-free products (mjd_flexInterp_mulKD/mulK). This handles any
kinematic configuration — including flexes attached to articulated
chains or with parent joints — without sparsity pattern restrictions.
Before (`bunny_multicell`):
```
Simulation time : 50.80 s
Steps per second : 197
Realtime factor : 0.20 x
Time per step : 5080.3 µs
CG iters / step : 3.16
Contacts / step : 31.04
Constraints / step : 124.15
Degrees of freedom : 178
Dynamic memory usage : 0.4% of 100M
```
After:
```
Simulation time : 9.52 s
Steps per second : 1051
Realtime factor : 1.05 x
Time per step : 951.7 µs
CG iters / step : 3.21
Contacts / step : 30.90
Constraints / step : 123.61
Degrees of freedom : 178
Dynamic memory usage : 0.3% of 100M
```
PiperOrigin-RevId: 913758038
Change-Id: If5aa617b2d535c86aec9bd71c9e0003a2b38bdd7
The maximum depth of the octree used for SDF generation can now be specified in the mesh definition via `mjsMesh::octree_maxdepth`. The default value is 6.
PiperOrigin-RevId: 912494999
Change-Id: I6d828d1d3999b99d1210a6829a05b04fac591e1f
The new function mjs_getOriginSpec returns the mjSpec that was used to define a given mjsElement. Unlike mjs_getSpec, this value remains constant even after the element has been attached to a different model.
PiperOrigin-RevId: 911930951
Change-Id: Ia9cd79d9dfabc513d6121eadcffc5d41075224c9
The flex interpolation stiffness matrix within the implicit/implicitfast solvers is now built and factorized in a banded format instead of a dense one. This involves:
- Calculating the bandwidth based on the sparsity of the mass/damping matrix and the connectivity within flex cells.
- Allocating and populating a banded matrix `H`.
- Using `mju_cholFactorBand` and `mju_cholSolveBand` for factorization and solving.
This change improves performance for flexes with many DOFs but local coupling.
PiperOrigin-RevId: 901297952
Change-Id: I3efe06353d1903ea65ab30dc49685cede228bb68
This change introduces a `flex_cellcount` field to `mjModel` to specify the number of cells in each dimension for interpolated flexes. The stiffness computation, passive force calculation, and Jacobian derivatives are updated to operate on a per-cell basis, significantly improving performance by localizing computations to the nodes within each cell.
PiperOrigin-RevId: 901216393
Change-Id: Ic23132e609de11e71bb7fef8d1f139daad2ec264
This change introduces `nflexstiffness` and `flex_stiffnessadr` to allow flex stiffness matrices to have sizes other than the fixed 21 per element. Higher-order flexes can now store larger stiffness matrices based on their number of nodes. The `flex_stiffnessadr` array provides the starting index for each flex's stiffness data within the `flex_stiffness` array.
PiperOrigin-RevId: 899632263
Change-Id: Ie49182c46c3777acf0c6b492345edfcf62fb5e44
The `vertcollide` attribute in flex and flexcomp contact specifications has been removed since the next mjWarp release will support flex collisions. This attribute was previously used to enable vertex-based collisions by adding sphere geoms at flex vertices. The functionality associated with this attribute has been deprecated and removed from the XML parser, documentation, and internal data structures. Affected example XML files have also been updated.
PiperOrigin-RevId: 885595503
Change-Id: I6a78975f1bc540c09ea8b5306ff3be0962b7ab24
This change introduces new functions to load an `mjModel` from an XML string. Two overloads are provided: one that creates a temporary VFS and one that uses a MjVFS arg.
Also updated other places where `from_xml_string` should be used: demos, readme, etc.
PiperOrigin-RevId: 882581762
Change-Id: I8428196f8f56ae9630fcd4f0bb6763cdc1c43da0
Introduces `from_xml_path` and `from_binary_path` as more idiomatic aliases for `mj_loadXML` and `mj_loadModel` respectively. Refactors the binding of `mj*STRING` constants. Instead of exposing `get_mj*STRING` functions, these constants are now available as properties on the `Module` object. Runtime getters are added via EM_ASM to lazily call the underlying C++ functions.
PiperOrigin-RevId: 882566011
Change-Id: Id3bd5c23704fd122af30a50aed089bd3143fbc96
This change updates all size-related members within the `mjModel` struct from `int` to `mjtSize`. This allows MuJoCo to handle models with a larger number of elements. Corresponding changes were made to macros, function signatures, and I/O routines to accommodate the new `mjtSize` type.
PiperOrigin-RevId: 860144595
Change-Id: I701c6d607715d240766b6210a9773cd9e4258c59
This change adds an Emscripten binding for loading binary MuJoCo models (`.mjb`) from the virtual filesystem. The new binding, `mj_loadBinary`, takes a filename and an `MjVFS` object, enabling the loading of models that reference assets within the VFS.
PiperOrigin-RevId: 859740455
Change-Id: I9f9d8bbba0b57422e2356867e4282a1b04566475
Yuval Tassa