https://youtu.be/17XpwnqyCXs
New transmission type mjTRN_SO3: a relative orientation, targeting a ball
joint or a site+refsite pair. It is the first transmission with more than
one force output: its length is the norm of the expmap vector of the
relative rotation and its moment axes are the 3 rows of the
relative rotational Jacobian, without projecting onto per-actuator gears.
New force law mjGAIN_SO3/mjBIAS_SO3: a geodesic PD servo, force =
kp * log(q_current^-1 * q_target) - kv * velocity, exact for arbitrary axis
combinations with a unique equilibrium at every commanded orientation.
Error, moment rows and velocity all live in the child frame (joint or
site): the right-difference error is the gradient of the geodesic
potential in that frame. The parent-frame (left) error is not: driving
child-frame torques with it pumps energy at large angles, settling into
steady-spinning limit cycles (the SO3LargeAngleConvergence test). The
integrator variant stores the 3D orientation setpoint in act (actnum = 3,
re-anchored to a bounded representative at integration time). Exposed in
MJCF as <orientation joint=|site=+refsite= kp kv|dampratio>, or via
<general gaintype="so3" biastype="so3">.
The setpoint input has two charts: an expmap target (3 controls, default)
or a quaternion target (4 controls) -- <orientation input="quat">, the
first actuator with different input and output widths. The signature is
recorded in a new per-actuator field actuator_ctrlspec (mjtCtrlChart),
whose meaning is scoped by the gain type the way gain/bias parameters are;
ctrlnum is derived from it at compile time and remains the layout
authority. An explicit field rather than width inference or a prm slot:
width-as-chart cannot express same-width signatures (upcoming servo input
subsets), and prm slots are the input_mode pattern this stack retires.
The force law normalizes the commanded quaternion, making it scale- and
antipodally-invariant. The all-zero ctrl still maps to the identity via
mju_normalize4, but it is a degenerate point (a nudge of any component
commands a half-turn), so quat inputs reset to the identity quaternion:
new mj_resetCtrl sets neutral ctrl values (zero, except qw = 1), called
by mj_resetData and the viewers' Clear All. The quat chart is
restricted to dyntype 'none': integrating a quaternion setpoint linearly
is not meaningful on the manifold. New mjsActuator.ctrlspec field carries
the signature through the spec and XML round-trip.
Actuator sensors (actuatorpos/vel/frc) now report one value per force
output; dim = 3 on an SO3 actuator.
As the first actuator with nu != nactuator, this commit also makes the
viewers multi-input aware: the control sliders in simulate and studio,
which indexed per-actuator arrays by control index (out of bounds on
this model class), are generated per control and labeled with the
actuator name plus an input suffix ("orient/qw"), via the new
introspection helper mj_actuatorInputName -- the single source of truth
for input names, extended by each new multi-input type (quaternion
components are w-first: qw, qx, qy, qz). Slider ranges now honor a
defined ctrlrange even when ctrllimited is false: range is the UI hint,
limited is the clamp -- wrapped and expmap setpoints are unbounded but
still want finite sliders, while quat components are truly bounded.
The rotational demo model is orientation.xml under
test/engine/testdata/actuation/, upgraded to a three-way contrast:
per-axis wrapped servos vs an expmap-commanded vs a quat-commanded
orientation actuator, on identical checker-textured boxes. It is loaded
by the mixed-axis contrast and input-name tests, and doubles as the
viewer test model (slider groups of 3 independent, 3 grouped, 4 grouped).
PiperOrigin-RevId: 951607063
Change-Id: If235dba8e2f2ca72672e7c62531a27e967c6a373
https://youtu.be/GioWwB36XHI
The new geom attribute adhesion (units of force, signed; pair-level
override) translates the contact friction cone along its normal so
that the force origin lies strictly inside it. Consequences: each
contact can pull with up to the given force before breaking, and the
tangential friction budget becomes mu*(f_N + adhesion) -- the
Mohr-Coulomb yield condition with cohesion c = mu*adhesion -- so
lightly-squeezed grasps retain a guaranteed friction floor.
A translated cone factors exactly into {constant attractive force}
+ {original cone}, so no solver kernels change. The implementation is
this factorization: a constant attraction along contact normals
accumulated into the new mjData.qfrc_adhesion (summed into
qfrc_passive), plus a bias of adhesive contact rows' reference
acceleration (aref += R*adhesion), which makes resting penetration
exactly independent of adhesion. Contacts of adhesive pairs remain
active throughout the gap zone, producing rows with positive violation
whose reference acceleration pulls: a tether that resists pull-off
smoothly, captures objects released within the band into steady
contact, and detaches at the specified force. Adhesion values of the
two geoms combine by sum; explicit pairs override.
mj_contactForce reports the net interface force (cone force minus the
adhesive pull), whose normal component can now be negative. Negative
adhesion is allowed and produces a repulsive offset (air hockey).
PiperOrigin-RevId: 950858148
Change-Id: I879c08eba7ae501e5c0f8c2f807167344da4c2bc
https://www.youtube.com/watch?v=PdSdrqhSiZA
The new geom attribute surfacevel (6 numbers: linear and angular velocity in the geom's local frame, angular about the geom frame origin) specifies the velocity of the geom's surface material relative to the geom frame. The relative surface velocity of the two geoms is added to the tangential contact rows of efc_vel in mj_referenceConstraint, so friction drives touching bodies toward the motion of the surface: objects on a conveyor are transported at belt speed, turntables impart omega x r with torsional spin-up for condim >= 4, and surface velocities compose with each other and with body motion. The component along the contact normal is projected out: probe experiments showed that velocity-space emission chatters mass-independently and ingestion merely deepens penetration; normal-direction effects belong to force-space features.
surfacevel is interpreted in the geom frame as authored: for mesh geoms, whose compiled frame absorbs the mesh centering and principal-axes transform, the compiler re-expresses the authored value in the compiled frame.
No special interaction with sleeping: objects being transported do not fall asleep because they are moving; objects at rest on an active surface may sleep like any other resting object.
Includes showcase models (model/surfacevel/): a luggage carousel whose ring is a spinning square-profile supertorus fed by a cascade of belts with matched spinning end rollers, bags dropping in and circulating indefinitely; and a treadmill with a passive humanoid.
PiperOrigin-RevId: 948647785
Change-Id: I0c6559a91cc7ece1237eb8ac2e51986e7342d962
For example when loading parent_merge.xml:
```
WARNING: Attach conflict when attaching 'child' to 'parent_merge', policy is 'merge'
timestep: parent has 0.005, child has 0.002, taking the minimum
iterations: parent has 50, child has 100, taking the maximum
flag 'Damper': added from child
```
When loading parent_error.xml:
```
XML Error: Attach conflict when attaching 'child' to 'parent_error', policy is 'error'
timestep: parent has 0.005, child has 0.002
iterations: parent has 50, child has 100
Element 'attach', line 10
```
PiperOrigin-RevId: 933620810
Change-Id: Ib477863b5ef763474d27fb4be5a4148be1d5d500
Yuval Tassa