actdim has a default value of -1 (==unset), which means it currently gets saved for all actuators. After this change, it will only be saved if the value is > 1, errors are thrown for stateful actuators with actdim=0 and stateless actuators with actdim>0.
PiperOrigin-RevId: 520627313
Change-Id: Ia498dae5c7314cfaa0995f8077d297c2339a5c35
- Memory heuristic rounds up to the nearest MB.
- `simulate` reports total memory currently allocated in the info box.
- All example models use `<size memory/>` rather than legacy attributes.
- Regenerated `example_saved.xml` and reformatted original model in [overview chapter](https://mujoco.readthedocs.io/en/latest/overview.html?#examples).
- `<size>` top-level section does not get written if empty.
PiperOrigin-RevId: 486702670
Change-Id: I0306e335f32344c59562ba606664ec9d2101f8a8
If given two non-decreasing values, `springlength` specifies a deadband for spring stiffness, inside of which the force is 0 and outside of which force behaves like a regular spring, with the setpoint corresponding to the nearest value. This can be used to create tendons whose limits are enforced by springs rather than constraints, which are cheaper and easier to analyse. See test/engine/testdata/tendon_springlength.xml example model.
Spring-limited spatial tendons whose lower range value is 0 are rendered as catenaries.
Fixes#520.
PiperOrigin-RevId: 484509706
Change-Id: I6698e94ee36168f52d501e83057559805e05172d
- Added new `cable` composite type:
* The `initial` parameter specifies the joint at the starting boundary: `free`, `ball`, or `none`.
* The boundary bodies are exposed with the names:`B_left` and `B_right`.
* The vertex initial positions can be specified directly in the XML with the parameter `vertex`.
* The orientation of the body frame **is** the orientation of the material frame of the curve.
- Added new `cable` passive force plugin:
* Twist and bending stiffness can be set separately with the parameters `twist` and `bend`.
* The stress-free configuration can be set to be the initial one or flat with the flag `flat`.
* New cable example showing the formation of plectoneme.
* New coil example.
* New belt example showing interaction between twist and anisotropy.
* Added test using cantilever exact solution.
PiperOrigin-RevId: 480033694
Change-Id: I491271bce8fccb185961477e903e5a72d172c8a3
- Add private function `mj_arenaAlloc`. This is used internally to allocate memory from the arena.
- Add private function `mj_nefc` to count constraints. This function returns a tight upper bound on `d->nefc`. The number of counted constraints can be slightly bigger than exact `d->nefc` in the case of constraints with empty Jacobian, as when placing a frictional tendon between two world sites.
- Add new `memory` attribute to the `size` XML element for specification of arena memory size. This attribute is mutually exclusive with `nstack` and `njmax` specifications, which are now deprecated (but left around for the time being for legacy compatibility).
- Move `d->stack` to the end of the new arena space. The stack now grows in reverse from the end.
PiperOrigin-RevId: 479341539
Change-Id: Ie019c202e0908577ffc6f833a37920858116f667
This is an amendment to 4bfc2c0311.
Add an autolimits compiler option. When true, *limited will be inferred from the presence of the *range attributes.
When false, models where limited is not specified, and range is will fail to compile.
PiperOrigin-RevId: 472438650
Change-Id: I489098e879ee695030f44e0d8cd969787e75fb90
- Added `refsite` attribute to actuators with `site` transmission.
- Such actuators now have a well defined length and can be used for e.g., Cartesian end-effector control.
- Added example models and documentation describing the new feature.
PiperOrigin-RevId: 471561218
Change-Id: I538f09af9600d5c53992c4a9fed325648aab4fa3
- `anchor` determines the point of wrench application, in the frame of body2.
- `tfratio` scales applied torques relative to applied forces.
- Add visualisation of both anchor points to both weld and connect constraints.
- Add a test model showing how the new weld parameters behave.
PiperOrigin-RevId: 470021901
Change-Id: I3faba0e5dcab2e29ee81096f5ff71ff66d99758c
- `anchor` determines the point of wrench application, in the frame of body2.
- `tfratio` scales applied torques relative to applied forces.
- Add visualisation of both anchor points to both weld and connect constraints.
- Add a test model showing how the new weld parameters behave.
PiperOrigin-RevId: 469228149
Change-Id: I836b0791f10fb624607a12ef3c687da991c21789
- `anchor` determines the point of wrench application, in the frame of body2.
- `tfratio` scales applied torques relative to applied forces.
- Add visualisation of both anchor points to both weld and connect constraints.
- Add a test model showing how the new weld parameters behave.
PiperOrigin-RevId: 469190483
Change-Id: I20f6da85b09cd2c4c0b5d29eb8003eabb524e55e
- Add `azimuth` and `elevation` to `visual.global`.
- Add `mjv_defaultFreeCamera`.
- Use `mjv_defaultFreeCamera` in `simulate`.
PiperOrigin-RevId: 465505244
Change-Id: I61e60f14a990d4e2d220958adb75c325001978ee
- Adhesion actuators using contact normals as force transmission mechanism.
- Related video: https://youtu.be/HdBue4MUZysCloses#229
PiperOrigin-RevId: 464389367
Change-Id: I9f69b3cd152d957e8f65870d208788463c036a6d
- Mesh inertias can now be computed exactly for well-formed (no holes) non-convex meshes.
- To activate this feature, set `<compiler exactmeshinertia="true">` (defaults to `false`). This default may change in the future.
- Added `<geom shellinertia="true/false">` (defaults to `false`). When true, geom inertia is computed assuming all the mass is concentrated on the surface, and `density` is interpreted as surface density (mass/area). Currently only mesh geoms are supported.
PiperOrigin-RevId: 464368395
Change-Id: I17afd99b9b221c9d24ae951f6e63d5c61ff89820
- Add basic test for keyframes.
- Add missing documentation for keyframe mocap positions and quaternions.
PiperOrigin-RevId: 459021649
Change-Id: I91cf7ecbddc6262e8c72a868eeb82d627f389fb3
Fixes a bug introduced in CL/432455486, which stopped saving explicit inertias if they were inferred from geoms. But if we don't save inertias then we need to save mass/density specifiers.
BEGIN_PUBLIC
xml_native_writer saves geom mass or density, if specified.
END_PUBLIC
PiperOrigin-RevId: 450667775
Change-Id: Ibb5b269b58f1143013091729642bb501243ed943
Yuval Tassa