重构 改为标准化输出

backend/live-evals/20260831T104758Z/artifacts/cad_e34876f663f7/documents/requirements-draft-v1.json

@@ -0,0 +1,60 @@
+{
+  "items": [
+    {
+      "acceptance_claims": [
+        {
+          "claim_kind": "solid_count_equals",
+          "expected": {
+            "value": 1
+          }
+        },
+        {
+          "claim_kind": "single_connected_body",
+          "expected": {}
+        }
+      ],
+      "assumptions": [
+        "Use millimetre units throughout.",
+        "Treat the reinforcing rib as integral to the base, not a separate fastened part.",
+        "Use reasonable default dimensions consistent with a compact mounting plate."
+      ],
+      "draft_id": "draft_001",
+      "source_ids": [
+        "src_001"
+      ],
+      "statement": "Create one connected mounting plate model in millimetres with a rectangular base and an integral vertical reinforcing rib. Assume a base about 120 mm by 80 mm by 10 mm, with a rib about 80 mm long, 8 mm thick, and 20 mm high, all fused into a single part."
+    },
+    {
+      "acceptance_claims": [
+        {
+          "claim_kind": "through_cylindrical_bore",
+          "expected": {
+            "count": 4,
+            "diameter_mm": 8,
+            "tolerance_mm": 0.2
+          }
+        },
+        {
+          "claim_kind": "circular_hole_pattern",
+          "expected": {
+            "count": 4,
+            "diameter_mm": 8,
+            "pitch_radius_mm": 70,
+            "tolerance_mm": 0.5
+          }
+        }
+      ],
+      "assumptions": [
+        "Use a centered circular four-hole pattern as the interpretation of equally spaced mounting holes.",
+        "Make the holes through all solid material."
+      ],
+      "draft_id": "draft_002",
+      "source_ids": [
+        "src_001"
+      ],
+      "statement": "Add four equally spaced mounting through holes to the plate. Assume the holes are 8 mm diameter and arranged symmetrically on a 70 mm pitch radius so the pattern is centered on the base and remains within the rectangular outline."
+    }
+  ],
+  "revision": 1,
+  "schema_version": "cad.requirements-draft.v1"
+}

backend/live-evals/20260831T104758Z/artifacts/cad_e34876f663f7/documents/requirements-review-v1.json

@@ -0,0 +1,30 @@
+{
+  "coverage": [
+    {
+      "requirement_ids": [
+        "req_001",
+        "req_002"
+      ],
+      "source_id": "src_001"
+    }
+  ],
+  "issues": [
+    "Draft 002's centered circular four-hole pattern with 70 mm pitch radius is infeasible for the assumed 120 mm by 80 mm rectangular base: hole centers at +/-70 mm exceed the half-length 60 mm and half-width 40 mm extents, before even considering 8 mm hole diameter edge clearance.",
+    "The source asks for four equally spaced mounting through holes, but does not require a circular bolt pattern; a feasible rectangular/symmetric pattern or a smaller pitch radius should be specified."
+  ],
+  "item_verdicts": [
+    {
+      "draft_id": "draft_001",
+      "question": null,
+      "reason_code": "none",
+      "verdict": "pass"
+    },
+    {
+      "draft_id": "draft_002",
+      "question": null,
+      "reason_code": "conflict",
+      "verdict": "revise"
+    }
+  ],
+  "verdict": "revise"
+}

backend/live-evals/20260831T104758Z/artifacts/cad_e34876f663f7/documents/source-index.json

@@ -0,0 +1,6 @@
+{
+  "schema_version": "cad.source-index.v1",
+  "sources": {
+    "src_001": "Create one connected mounting plate in millimetres with a rectangular base, a vertical reinforcing rib, and four equally spaced mounting through holes. State reasonable dimensions as assumptions, then verify a single connected solid and the four-hole pattern."
+  }
+}

backend/live-evals/20260831T104758Z/artifacts/cad_e34876f663f7/source-requirements.md

@@ -0,0 +1 @@
+Create one connected mounting plate in millimetres with a rectangular base, a vertical reinforcing rib, and four equally spaced mounting through holes. State reasonable dimensions as assumptions, then verify a single connected solid and the four-hole pattern.