11 lines
1.1 KiB
Markdown
11 lines
1.1 KiB
Markdown
# Requirements
|
|
|
|
- req_001: Create one connected mounting plate in millimetres with a rectangular base and an integral vertical reinforcing rib. Use reasonable assumptions for the unlabeled dimensions: base 120 mm x 80 mm x 10 mm, rib 80 mm tall x 8 mm thick running along one long edge, and all edges blended only if needed for manufacturability.
|
|
- Assumption: The plate is modeled as one solid body in millimetres.
|
|
- Assumption: The reinforcing rib is integral to the base and does not create a separate body.
|
|
- Assumption: Unspecified dimensions are set to practical defaults that preserve a compact mounting plate form.
|
|
- req_002: Add four mounting through holes to the plate as an evenly spaced hole pattern suitable for mounting. Assume 6 mm hole diameter and place the holes symmetrically on the base so the pattern is repeatable and clearly distinct from the rib.
|
|
- Assumption: The four mounting holes are through holes.
|
|
- Assumption: The holes are laid out as a symmetric pattern on the rectangular base.
|
|
- Assumption: Exact edge offsets are selected to keep the holes clear of the rib and maintain practical wall thickness.
|