Ribbon: New Sketch on the Sheet Metal tab again; tests for entering and leaving sketches (#3946)

* Ribbon: New Sketch on the Sheet Metal tab again; tests pin sketch enter/exit

Before the ribbon redesign the Sheet Metal tab started with New Sketch. It
gets its own Sketch panel again, like the Model tab's, and a sketch started
there keeps the tab until it opens.

Workspace tests pin the ways into and out of a sketch: New Sketch then a
plane, a double-click in the timeline or the browser, and the browser's Edit
Sketch all open the SKETCH tab looking at the sketch. Finish Sketch from the
palette or the ribbon lands on MODEL with the earlier view back. Escape and
Enter keep the sketch open (#1804), and Undo after Finish reopens it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* docs: ribbon layout lists Sheet Metal's Sketch panel

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Workspace test: press the keys well apart

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
bherbruck
2026-10-20 21:32:48 -04:00
committed by GitHub
parent 97383454c6
commit 4098ff9dc8
2 changed files with 102 additions and 0 deletions
+100
View File
@@ -245,6 +245,8 @@ pub const SECTIONS: &[Section] = &[
// Sketch dimensions are driven by parameters, so they are one click away while sketching.
Section { tab: "SKETCH", panel: "CONFIGURE", promoted: 2, ids: CONFIGURE },
Section { tab: "SKETCH", panel: "FINISH SKETCH", promoted: 1, ids: &["sketch.finish"] },
// New Sketch leads the tab, as on MODEL: a sheet part starts from a sketch (#3250).
Section { tab: "SHEET METAL", panel: "SKETCH", promoted: 1, ids: &["sketch.create"] },
Section {
tab: "SHEET METAL",
panel: "CREATE",
@@ -631,6 +633,7 @@ mod tests {
("INSERT", "FILES", "component.insert_design"),
("ASSEMBLE", "COMPONENTS", "component.insert_design"),
("SHEET METAL", "CREATE", "sheet.convert"),
("SHEET METAL", "SKETCH", "sketch.create"),
("SKETCH", "REFERENCE", "canvas.insert"),
] {
assert!(layout(tab, panel, &specs).unwrap().0.iter().any(|c| c.id == id));
@@ -848,4 +851,101 @@ mod tests {
}
assert_eq!(h.app.session.world_state().bodies.len(), 2, "the STEP file's body is inserted");
}
/// Every way into a sketch (New Sketch on the ribbon then a plane, a double-click in the
/// timeline or the browser, Edit Sketch in the browser's menu) opens the SKETCH tab and looks
/// at the sketch; Finish Sketch (palette or ribbon) lands on MODEL with the earlier view back
/// and the sketch still listed, as before the ribbon redesign.
#[test]
fn entering_and_finishing_a_sketch_keeps_the_tab_view_and_history() {
let iso = json!({"camera": {"yaw_deg": -45, "pitch_deg": 35}});
let top = json!({"camera": {"yaw_deg": 0, "pitch_deg": 90}});
let expect = |h: &mut crate::scenario::Harness, e: &serde_json::Value, what: &str| {
h.frames(3);
crate::scenario::check(h, e).unwrap_or_else(|err| panic!("{what}: {err}"));
};
let mut h = crate::scenario::Harness::new();
h.call("ui.view", json!({"view": "iso"}));
h.frames(3);
h.step(&json!({"click": {"handle": "button:sketch.create"}})).unwrap();
h.step(&json!({"click": {"plane": "XY"}})).unwrap();
expect(&mut h, &top, "New Sketch on XY");
assert_eq!(h.app.ui.tab, "SKETCH");
h.app.run("sketch.rectangle.two_point", json!({"p0": [0, 0], "p1": [40, 30]})).unwrap();
h.step(&json!({"click": {"handle": "sketch_palette:finish"}})).unwrap();
expect(&mut h, &json!({"sketching": false, "errors": 0}), "Finish");
expect(&mut h, &iso, "Finish puts the view back");
assert_eq!(h.app.ui.tab, "MODEL");
assert!(crate::scenario::handle_at("timeline:Sketch1").is_some() && crate::scenario::handle_at("row:Sketch1").is_some());
let entries = [
("timeline double-click", vec![json!({"click": {"handle": "timeline:Sketch1"}, "double": true})]),
("browser double-click", vec![json!({"click": {"handle": "row:Sketch1"}, "double": true})]),
(
"browser Edit Sketch",
vec![json!({"click": {"handle": "row:Sketch1"}, "button": "right"}), json!({"click": {"handle": "menu:ui.editSketch"}})],
),
];
for (how, steps) in entries {
for s in steps {
h.frames(3);
h.step(&s).unwrap_or_else(|e| panic!("{how}: {e}"));
}
expect(&mut h, &json!({"sketching": true}), how);
expect(&mut h, &top, how);
assert_eq!(h.app.ui.tab, "SKETCH", "{how}");
h.step(&json!({"click": {"handle": "button:sketch.finish"}})).unwrap();
expect(&mut h, &json!({"sketching": false}), how);
expect(&mut h, &iso, how);
assert_eq!(h.app.ui.tab, "MODEL", "{how}");
}
}
/// Escape and Enter, pressed one at a time, never leave a sketch (#1804); Undo right after
/// Finish reopens it, and a second Undo removes it and leaves the SKETCH tab.
#[test]
fn keys_keep_a_sketch_open_and_undo_after_finish_reopens_it() {
let mut h = crate::scenario::Harness::new();
h.frames(3);
h.step(&json!({"start": "sketch.create"})).unwrap();
h.step(&json!({"click": {"plane": "XY"}})).unwrap();
h.app.run("sketch.rectangle.two_point", json!({"p0": [0, 0], "p1": [40, 30]})).unwrap();
for key in [json!({"key": "Escape"}), json!({"key": "Escape"}), json!({"key": "Enter"}), json!({"key": "Enter", "cmd": true})] {
h.step(&key).unwrap();
// Well apart, so two presses are never a quick double press.
h.frames(60);
assert!(h.app.session.active_sketch.is_some(), "{key}");
assert_eq!(h.app.ui.tab, "SKETCH", "{key}");
}
h.step(&json!({"click": {"handle": "sketch_palette:finish"}})).unwrap();
h.frames(2);
h.step(&json!({"key": "Z", "cmd": true})).unwrap();
h.frames(2);
assert!(h.app.session.active_sketch.is_some(), "Undo after Finish reopens the sketch");
assert_eq!(h.app.ui.tab, "SKETCH");
h.step(&json!({"key": "Z", "cmd": true})).unwrap();
h.frames(2);
assert!(h.app.session.active_sketch.is_none());
assert_eq!(h.app.ui.tab, "MODEL");
}
/// New Sketch is on the SHEET METAL tab, as it was before the ribbon redesign, and a sketch
/// started there stays on its tab until it opens.
#[test]
fn new_sketch_starts_from_the_sheet_metal_tab() {
let mut h = crate::scenario::Harness::new();
h.app.run("sketch.create", json!({"plane": "XY"})).unwrap();
h.app.run("sketch.rectangle.two_point", json!({"p0": [0, 0], "p1": [40, 30]})).unwrap();
h.app.run("sketch.finish", json!({})).unwrap();
h.app.run("sheet.flange", json!({"name": "Sheet", "body_name": "Sheet"})).unwrap();
h.frames(3);
assert_eq!(h.app.ui.tab, "SHEET METAL");
h.step(&json!({"click": {"handle": "button:sketch.create"}})).unwrap();
h.frames(2);
assert_eq!(h.app.ui.tab, "SHEET METAL", "New Sketch is on this tab, so it stays");
h.step(&json!({"click": {"plane": "XZ"}})).unwrap();
h.frames(2);
assert!(h.app.session.active_sketch.is_some());
assert_eq!(h.app.ui.tab, "SKETCH");
}
}
+2
View File
@@ -45,6 +45,7 @@ Always shown, in order: MODEL, SURFACE, ASSEMBLE, INSERT, INSPECT, MANAGE, VIEW,
| SKETCH | CONSTRAIN | **`sketch.dimension`**, **`sketch.constraint.horizontal_vertical`**, **`sketch.constraint.coincident`**, **`sketch.constraint.tangent`**, **`sketch.constraint.equal`**, **`sketch.constraint.parallel`**, **`sketch.constraint.perpendicular`**, `sketch.construction`, `sketch.constrainer`, `sketch.constraint.fix`, `sketch.constraint.midpoint`, `sketch.constraint.concentric`, `sketch.constraint.collinear`, `sketch.constraint.symmetry`, `sketch.constraint.curvature`, `sketch.constraint.polygon`, `sketch.auto_constrain`, `sketch.auto_constrain_from_datum` |
| SKETCH | REFERENCE | **`sketch.project`**, `sketch.intersect`, `sketch.include_3d`, `sketch.project_to_surface`, `sketch.intersection_curve`, `sketch.spun_profile`, `sketch.isoparametric_curve`, `sketch.fit_curves_to_section`, `sketch.insert_dxf`, `sketch.insert_svg`, `canvas.insert` |
| SKETCH | FINISH SKETCH | **`sketch.finish`**, `sketch.finish_auto_constrain` |
| SHEET METAL | SKETCH | **`sketch.create`** |
| SHEET METAL | CREATE | **`sheet.flange`**, **`sheet.hem`**, **`sheet.fold`**, **`sheet.perforate`**, `sheet.convert` |
| SHEET METAL | FLAT | **`sheet.unfold`**, **`sheet.refold`**, **`sheet.flat_pattern`** |
| SHEET METAL | OUTPUT | **`sheet.export_dxf`**, **`sheet.export_bend_table`** |
@@ -66,6 +67,7 @@ Explicit command-id lists override the default placement mapping. Shared command
| RENDER / IMAGE | RENDER / IMAGE | `render.start` |
| RENDER / SCENE | RENDER / SCENE | `render.scene` |
| SHEET METAL / CREATE | MODEL / MODIFY | `sheet.convert` |
| SHEET METAL / CREATE | SHEET METAL / SKETCH | `sketch.create` |
| SHEET METAL / CREATE | SHEET METAL / CREATE | `sheet.flange`, `sheet.perforate`, `sheet.hem`, `sheet.fold` |
| SHEET METAL / CREATE | SHEET METAL / FLAT | `sheet.flat_pattern` |
| SHEET METAL / MODIFY | MANAGE / RULES | `sheet.manage_rules` |