Regenerate generated files and fold pending files [skip ci]

This commit is contained in:
github-actions[bot]
2026-11-04 06:27:42 +00:00
parent 41a450be7c
commit 72df682af7
14 changed files with 13 additions and 15 deletions
+1
View File
@@ -1423,6 +1423,7 @@
"document.read_only_save": "فُتح هذا التصميم للقراءة فقط: احفظه كملف جديد",
"document.save_changes": "حفظ التغييرات على {name}؟",
"document.save_copy": "حفظ نسخة…",
"document.tab_unsaved_changes": "تغييرات غير محفوظة",
"document.unsaved_changes": "في {name} تغييرات غير محفوظة. إن لم تحفظها فستضيع.",
"drive.rigid": "{joint} مفصل صلب: يثبّت أجزاءه في مكانها، لذا لا يوجد ما يمكن تحريكه. لتتحرك الأجزاء، غيّر نوعه في «تعديل المفصل»: «دوراني» للدوران، «منزلق» للانزلاق، «أسطواني» لكليهما.",
"drive.stopped_by_contact": "توقف عند {value}: سيخترق {a} الجسم {b}",
+1
View File
@@ -1418,6 +1418,7 @@
"document.read_only_save": "Dieses Design wurde schreibgeschützt geöffnet: Speichern Sie es als neue Datei",
"document.save_changes": "Änderungen in {name} speichern?",
"document.save_copy": "Kopie speichern…",
"document.tab_unsaved_changes": "Ungespeicherte Änderungen",
"document.unsaved_changes": "{name} enthält ungespeicherte Änderungen. Wenn Sie nicht speichern, gehen sie verloren.",
"drive.rigid": "{joint} ist ein starres Gelenk. Es hält die verbundenen Teile fest zusammen und ermöglicht daher keine Bewegung. Um die Teile beweglich zu machen, ändern Sie den Gelenktyp unter „Gelenk bearbeiten“: Drehgelenk für Drehbewegungen, Schubgelenk für lineare Bewegungen oder Zylindergelenk für beides.",
"drive.stopped_by_contact": "Angehalten bei {value}: {a} würde {b} durchdringen",
+1
View File
@@ -1423,6 +1423,7 @@
"document.read_only_save": "This design was opened read-only: save it as a new file",
"document.save_changes": "Save changes to {name}?",
"document.save_copy": "Save a Copy…",
"document.tab_unsaved_changes": "Unsaved changes",
"document.unsaved_changes": "{name} has unsaved changes. If you don't save, they are lost.",
"drive.rigid": "{joint} is a rigid joint: it holds its parts still, so it has nothing to drive. To let them move, change its type in Edit Joint: Revolute to rotate, Slider to slide, Cylindrical for both.",
"drive.stopped_by_contact": "Stopped at {value}: {a} would pass through {b}",
+1
View File
@@ -1358,6 +1358,7 @@
"document.read_only_save": "Este diseño se abrió en solo lectura: guárdalo como un archivo nuevo",
"document.save_changes": "¿Guardar los cambios de {name}?",
"document.save_copy": "Guardar una copia…",
"document.tab_unsaved_changes": "Cambios sin guardar",
"document.unsaved_changes": "{name} tiene cambios sin guardar. Si no los guardas, se perderán.",
"drive.rigid": "{joint} es una junta rígida: mantiene sus partes quietas, así que no tiene nada que impulsar.",
"drive.stopped_by_contact": "Detenido en {value}: {a} atravesaría {b}",
+1
View File
@@ -1391,6 +1391,7 @@
"document.read_only_save": "Cette conception a été ouverte en lecture seule : enregistrez-la dans un nouveau fichier",
"document.save_changes": "Enregistrer les modifications de {name} ?",
"document.save_copy": "Enregistrer une copie…",
"document.tab_unsaved_changes": "Modifications non enregistrées",
"document.unsaved_changes": "{name} contient des modifications non enregistrées. Si vous n'enregistrez pas, elles seront perdues.",
"drive.rigid": "{joint} est une liaison rigide : elle maintient ses pièces immobiles, il n'y a donc rien à piloter. Pour les laisser bouger, changer son type dans Modifier la liaison : Revolute pour tourner, Slider pour coulisser, Cylindrical pour les deux.",
"drive.stopped_by_contact": "Arrêté à {value} : {a} traverserait {b}",
+1
View File
@@ -1423,6 +1423,7 @@
"document.read_only_save": "התכן הזה נפתח לקריאה בלבד: יש לשמור אותו כקובץ חדש",
"document.save_changes": "לשמור את השינויים ב־{name}?",
"document.save_copy": "שמירת עותק…",
"document.tab_unsaved_changes": "שינויים שלא נשמרו",
"document.unsaved_changes": "ב־{name} יש שינויים שלא נשמרו. ללא שמירה, הם יאבדו.",
"drive.rigid": "{joint} הוא מפרק קשיח: הוא מחזיק את החלקים שלו במקומם, ולכן אין מה להניע. כדי שהחלקים יזוזו, שנו את הסוג שלו ב״עריכת מפרק״: Revolute לסיבוב, Slider להחלקה, Cylindrical לשניהם.",
"drive.stopped_by_contact": "נעצר ב־{value}: {a} היה עובר דרך {b}",
+1
View File
@@ -1392,6 +1392,7 @@
"document.read_only_save": "Questa progettazione è stata aperta in sola lettura: salvala come nuovo file",
"document.save_changes": "Salvare le modifiche a {name}?",
"document.save_copy": "Salva una copia…",
"document.tab_unsaved_changes": "Modifiche non salvate",
"document.unsaved_changes": "{name} contiene modifiche non salvate. Se non salvi, andranno perse.",
"drive.rigid": "{joint} è un giunto rigido: tiene ferme le sue parti, quindi non c'è nulla da azionare. Per farle muovere, cambia il suo tipo in Modifica giunto: Rotante per ruotare, Scorrevole per scorrere, Cilindrico per entrambi.",
"drive.stopped_by_contact": "Arrestato a {value}: {a} attraverserebbe {b}",
+1
View File
@@ -1423,6 +1423,7 @@
"document.read_only_save": "このデザインは読み取り専用で開かれています:新しいファイルとして保存してください",
"document.save_changes": "{name} への変更を保存しますか?",
"document.save_copy": "コピーを保存…",
"document.tab_unsaved_changes": "未保存の変更",
"document.unsaved_changes": "{name} には保存されていない変更があります。保存しない場合、変更内容は失われます。",
"drive.rigid": "{joint} は剛体ジョイントです。部品をその場に固定するため、駆動するものがありません。動かすには「ジョイントを編集」で種類を変更してください: 回転させるなら Revolute、スライドさせるなら Slider、両方なら Cylindrical。",
"drive.stopped_by_contact": "{value} で停止: {a} が {b} を通り抜けてしまいます",
+1
View File
@@ -1395,6 +1395,7 @@
"document.read_only_save": "Dit ontwerp is alleen-lezen geopend: sla het op als nieuw bestand",
"document.save_changes": "Wijzigingen in {name} opslaan?",
"document.save_copy": "Kopie opslaan…",
"document.tab_unsaved_changes": "Niet-opgeslagen wijzigingen",
"document.unsaved_changes": "{name} heeft niet-opgeslagen wijzigingen. Als u niet opslaat, gaan ze verloren.",
"drive.rigid": "{joint} is een starre verbinding: die houdt zijn onderdelen vast en heeft dus niets om aan te sturen. Wijzig het type in Verbinding bewerken om ze te laten bewegen: Draaiend om te draaien, Schuivend om te schuiven, Cilindrisch voor beide.",
"drive.stopped_by_contact": "Gestopt bij {value}: {a} zou door {b} heen gaan",
@@ -1,15 +0,0 @@
{
"en": { "document.tab_unsaved_changes": "Unsaved changes" },
"ar": { "document.tab_unsaved_changes": "تغييرات غير محفوظة" },
"de": { "document.tab_unsaved_changes": "Ungespeicherte Änderungen" },
"es": { "document.tab_unsaved_changes": "Cambios sin guardar" },
"fr": { "document.tab_unsaved_changes": "Modifications non enregistrées" },
"he": { "document.tab_unsaved_changes": "שינויים שלא נשמרו" },
"it": { "document.tab_unsaved_changes": "Modifiche non salvate" },
"ja": { "document.tab_unsaved_changes": "未保存の変更" },
"nl": { "document.tab_unsaved_changes": "Niet-opgeslagen wijzigingen" },
"pl": { "document.tab_unsaved_changes": "Niezapisane zmiany" },
"sv": { "document.tab_unsaved_changes": "Osparade ändringar" },
"vi": { "document.tab_unsaved_changes": "Thay đổi chưa lưu" },
"zh": { "document.tab_unsaved_changes": "未保存的更改" }
}
+1
View File
@@ -1347,6 +1347,7 @@
"document.read_only_save": "Ten projekt otwarto tylko do odczytu: zapisz go jako nowy plik",
"document.save_changes": "Zapisać zmiany w {name}?",
"document.save_copy": "Zapisz kopię…",
"document.tab_unsaved_changes": "Niezapisane zmiany",
"document.unsaved_changes": "{name} ma niezapisane zmiany. Jeśli ich nie zapiszesz, zostaną utracone.",
"drive.rigid": "{joint} to złącze sztywne: utrzymuje swoje części nieruchomo, więc nie ma czym sterować. Aby mogły się poruszać, zmień jego typ w Edytuj złącze: Obrotowe do obrotu, Przesuwne do przesuwu, Walcowe do obu.",
"drive.stopped_by_contact": "Zatrzymano przy {value}: {a} przeszedłby przez {b}",
+1
View File
@@ -1392,6 +1392,7 @@
"document.read_only_save": "Den här konstruktionen öppnades skrivskyddad: spara den som en ny fil",
"document.save_changes": "Spara ändringar i {name}?",
"document.save_copy": "Spara en kopia…",
"document.tab_unsaved_changes": "Osparade ändringar",
"document.unsaved_changes": "{name} har osparade ändringar. Om du inte sparar går de förlorade.",
"drive.rigid": "{joint} är ett stelt led: det håller sina delar stilla och har därför inget att driva. Om delarna ska kunna röra sig, ändra ledets typ i Redigera led: Roterande för att rotera, Glidande för att glida, Cylindrisk för båda.",
"drive.stopped_by_contact": "Stoppade vid {value}: {a} skulle gå igenom {b}",
+1
View File
@@ -1423,6 +1423,7 @@
"document.read_only_save": "Thiết kế này được mở ở chế độ chỉ đọc: hãy lưu thành tệp mới",
"document.save_changes": "Lưu các thay đổi đối với {name}?",
"document.save_copy": "Lưu bản sao…",
"document.tab_unsaved_changes": "Thay đổi chưa lưu",
"document.unsaved_changes": "{name} có các thay đổi chưa lưu. Nếu không lưu, các thay đổi sẽ bị mất.",
"drive.rigid": "{joint} là khớp nối cứng: nó giữ cố định các chi tiết, nên không có gì để dẫn động. Để các chi tiết chuyển động, hãy đổi loại khớp nối trong “Chỉnh sửa khớp nối”: Revolute để xoay, Slider để trượt, Cylindrical cho cả hai.",
"drive.stopped_by_contact": "Đã dừng tại {value}: {a} sẽ xuyên qua {b}",
+1
View File
@@ -1423,6 +1423,7 @@
"document.read_only_save": "此设计以只读方式打开:请另存为新文件",
"document.save_changes": "保存对 {name} 的更改?",
"document.save_copy": "保存副本…",
"document.tab_unsaved_changes": "未保存的更改",
"document.unsaved_changes": "{name} 有未保存的更改。如果不保存,将丢失这些更改。",
"drive.rigid": "{joint} 是刚性接头:它把零件固定在原位,因此没有可驱动的运动。要让零件运动,请在“编辑接头”中更改其类型:旋转用 Revolute,滑动用 Slider,两者兼有用 Cylindrical。",
"drive.stopped_by_contact": "停在 {value}:{a} 会穿过 {b}",