Wave 338/509: Tests: the saved fitted-letters design measures its closed form, its letter as conics (and 3 more)

4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 23bfa1cf7 jyviko: Tests: the saved fitted-letters design measures its closed form, its letter as conics
- 0e3f01ec0 jyviko: Tests: a loft cut whose top is the basin's whole outline leaves the walls above as their own body
- b3dfcf1ff jyviko: Tests: an engraved face's letters project as conics, their exact quadratic Béziers
- 367beae69 jyviko: Viewport: the analysis legend stays above the floating History card again

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
This commit is contained in:
jyviko
2026-10-28 22:27:39 -04:00
parent d20efa730b
commit 74a97586a8
3 changed files with 37 additions and 12 deletions
+8 -1
View File
@@ -968,7 +968,14 @@ fn loft_cut_through_a_shelled_basin_in_either_order() {
assert!(r.is_ok(), "{pad:?} reverse {reverse}: {r:?}");
let v = volume(&mut s);
assert!((v - want).abs() < 1.0, "{pad:?} reverse {reverse}: {v} vs {want}");
assert_eq!(measure(&mut s)["body_count"], 1);
// The loft's top section is the basin's whole outline at z = 10, so the cut leaves the
// walls above it touching the rest only along their outer rim: two bodies, as a cut's
// pieces are (18480 mm³ of walls from z = 10 to 30, and the floor part below).
let m = measure(&mut s);
assert_eq!(m["body_count"], 2, "{m}");
let upper =
m["bodies"].as_array().unwrap().iter().find(|b| b["bbox"]["min"][2].as_f64().is_some_and(|z| (z - 10.0).abs() < 1e-9)).unwrap();
assert!((upper["volume_mm3"].as_f64().unwrap() - 18480.0).abs() < 1e-6, "{upper}");
}
}
// As a new body and joined: a valid solid of positive volume either way.
+25 -7
View File
@@ -709,11 +709,18 @@ fn a_face_engraved_with_text_projects_its_letters_exactly_and_extrudes() {
assert!(r.error.is_none(), "{r:?}");
let face = before - volume(&mut s);
assert!((face - taken).abs() < 1e-6 * before, "{face} {taken}");
// Its sketch got the letters as Bézier pieces.
// Its sketch got the letters as their exact pieces: the outline's quadratic Béziers, which are
// parabolic arcs, come in as conics (or as control-point splines).
let st = s.model.state();
let sketch = &st.sketches.last().unwrap().sketch;
let pieces =
sketch.curves.iter().filter(|c| c.link.is_some() && matches!(c.kind, solidcraft_sketch::CurveKind::Spline { control: true, .. })).count();
let pieces = sketch
.curves
.iter()
.filter(|c| {
c.link.is_some()
&& matches!(c.kind, solidcraft_sketch::CurveKind::Spline { control: true, .. } | solidcraft_sketch::CurveKind::Conic { .. })
})
.count();
assert!(pieces > 100, "{pieces}");
}
@@ -731,12 +738,23 @@ fn a_face_sketch_saved_with_fitted_letters_reopens_and_builds_the_same() {
let r = s.model.result(id).unwrap();
assert!(r.error.is_none(), "{name}: {:?}", r.error);
}
// The build that saved it measured 5916.018831 mm³.
assert!((volume - 5916.018830904924).abs() < 1e-3, "{volume}");
// The 30 x 20 x 10 block less the "S" 1 deep (its profile's exact area, Sketch2's smaller
// region) and the r 2 circle 3 deep, clear of the letter: 5916.010767. (The build that saved
// it measured 5916.018831, 8e-3 off; SMLib's integral is within 1e-8 of the closed form.)
let letter = s.model.state().sketches.iter().find(|k| k.name == "Sketch2").unwrap().profiles.iter().map(|p| p.area).fold(f64::INFINITY, f64::min);
let want = 6000.0 - letter - 3.0 * std::f64::consts::PI * 4.0;
assert!((volume - want).abs() < 1e-8 * 6000.0, "{volume} vs {want}");
// The letter's exact pieces in the face's link: its quadratic Béziers, as conics (or splines).
let st = s.model.state();
let sketch = &st.sketches.last().unwrap().sketch;
let pieces =
sketch.curves.iter().filter(|c| c.link.is_some() && matches!(c.kind, solidcraft_sketch::CurveKind::Spline { control: true, .. })).count();
let pieces = sketch
.curves
.iter()
.filter(|c| {
c.link.is_some()
&& matches!(c.kind, solidcraft_sketch::CurveKind::Spline { control: true, .. } | solidcraft_sketch::CurveKind::Conic { .. })
})
.count();
assert!(pieces > 0, "{pieces}");
}
+4 -4
View File
@@ -2642,9 +2642,6 @@ fn analysis_uniform(app: &SolveApp) -> [f32; 8] {
solidcraft_gpu::view::analysis_uniform(app.session.analysis.map(|a| a.mode()), crate::access::map(app).as_ref())
}
/// While Draft, Accessibility or Curvature Map analysis is on, what each of its colours means and
/// the values it stands for, at the bottom left of the viewport (#973). The colours alone don't
/// say, and with colour vision loss they can be hard to tell apart.
/// Why the model cannot be placed, across the bottom of the viewport, while it cannot: the
/// viewport then shows no placed bodies (see `open_meshing::session_world`).
fn placement_note(app: &SolveApp, painter: &egui::Painter, rect: Rect) {
@@ -2654,6 +2651,9 @@ fn placement_note(app: &SolveApp, painter: &egui::Painter, rect: Rect) {
painter.text(pos2(rect.center().x, rect.bottom() - 24.0), Align2::CENTER_BOTTOM, text, FontId::proportional(t.font_button), t.error);
}
/// While Draft, Accessibility or Curvature Map analysis is on, what each of its colours means and
/// the values it stands for, at the bottom left of the viewport (#973). The colours alone don't
/// say, and with colour vision loss they can be hard to tell apart.
fn analysis_legend(app: &SolveApp, painter: &egui::Painter, rect: Rect) {
use solidcraft_engine::SurfaceAnalysis as A;
let t = Tokens::get();
@@ -3967,7 +3967,7 @@ pub fn show(app: &mut SolveApp, ui: &mut egui::Ui) {
painter.add(egui_wgpu::Callback::new_paint_callback(rect, cb));
}
let overlay_rect = crate::shell::bottom_overlay_rect(app, rect);
analysis_legend(app, &painter, rect);
analysis_legend(app, &painter, overlay_rect);
placement_note(app, &painter, overlay_rect);
crate::frame_rate::paint(app, ui, &painter, overlay_rect);