* Viewport: show the running tool's icon beside the pointer
While an interactive tool or a command's dialog runs, its toolbar icon
rides above and right of the pointer in the viewport, so the next click's
command is visible without looking up at the ribbon. It sits clear of the
system arrow and of the sketch tools' coordinate readout below the
pointer, moves left at the right edge and below the readout at the top.
It shows only where a click reaches the model: not over panels, dialogs,
menus or the navigation bar, and not while the camera moves. The icon is
the command's own (the one the ribbon and the dialog header show), so
there is no new artwork. On by default; "Show tool at cursor" in View
settings (`ui.set {"toolCursor": false}`) turns it off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Viewport: the tool at the cursor is off by default
As asked in review: the badge starts off, and "Show tool at cursor" in
View settings (or `ui.set {"toolCursor": true}`) turns it on. The test
checks the default and turns it on through the View settings checkbox.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
@@ -335,6 +335,7 @@
|
||||
"Show Agent Cursor": "Zobrazit kurzor agenta",
|
||||
"Show in folder": "Zobrazit ve složce",
|
||||
"Show the pointer an AI agent moves (#35)": "Zobrazit ukazatel, kterým pohybuje AI agent (#35)",
|
||||
"Show tool at cursor": "Zobrazit nástroj u kurzoru",
|
||||
"Signed axes": "Osy se znaménkem",
|
||||
"Size": "Velikost",
|
||||
"Sketch constraints": "Vazby náčrtu",
|
||||
|
||||
@@ -335,6 +335,7 @@
|
||||
"Show Agent Cursor": "Vis agentmarkør",
|
||||
"Show in folder": "Vis i mappe",
|
||||
"Show the pointer an AI agent moves (#35)": "Vis markøren, som en AI-agent bevæger (#35)",
|
||||
"Show tool at cursor": "Vis værktøj ved markøren",
|
||||
"Signed axes": "Akser med fortegn",
|
||||
"Size": "Størrelse",
|
||||
"Sketch constraints": "Skitsebindinger",
|
||||
|
||||
@@ -421,6 +421,7 @@
|
||||
"Show Agent Cursor": "Agenten-Cursor anzeigen",
|
||||
"Show in folder": "Im Ordner anzeigen",
|
||||
"Show the pointer an AI agent moves (#35)": "Den Zeiger anzeigen, den ein KI-Agent bewegt (#35)",
|
||||
"Show tool at cursor": "Werkzeug am Cursor anzeigen",
|
||||
"Signed axes": "Vorzeichenbehaftete Achsen",
|
||||
"Size": "Größe",
|
||||
"Sketch constraints": "Skizzenbedingungen",
|
||||
|
||||
@@ -477,6 +477,7 @@
|
||||
"Show ghost": "Show ghost",
|
||||
"Show in folder": "Show in folder",
|
||||
"Show the pointer an AI agent moves (#35)": "Show the pointer an AI agent moves (#35)",
|
||||
"Show tool at cursor": "Show tool at cursor",
|
||||
"Signed axes": "Signed axes",
|
||||
"Size": "Size",
|
||||
"Sketch constraints": "Sketch constraints",
|
||||
|
||||
@@ -341,6 +341,7 @@
|
||||
"Show Agent Cursor": "Mostrar cursor del agente",
|
||||
"Show in folder": "Mostrar en carpeta",
|
||||
"Show the pointer an AI agent moves (#35)": "Mostrar el puntero que mueve un agente de IA (#35)",
|
||||
"Show tool at cursor": "Mostrar la herramienta junto al cursor",
|
||||
"Signed axes": "Ejes con signo",
|
||||
"Size": "Tamaño",
|
||||
"Sketch constraints": "Restricciones del boceto",
|
||||
|
||||
@@ -335,6 +335,7 @@
|
||||
"Show Agent Cursor": "Afficher le curseur de l'agent",
|
||||
"Show in folder": "Afficher dans le dossier",
|
||||
"Show the pointer an AI agent moves (#35)": "Afficher le pointeur déplacé par un agent IA (#35)",
|
||||
"Show tool at cursor": "Afficher l'outil près du curseur",
|
||||
"Signed axes": "Axes signés",
|
||||
"Size": "Taille",
|
||||
"Sketch constraints": "Contraintes d'esquisse",
|
||||
|
||||
@@ -335,6 +335,7 @@
|
||||
"Show Agent Cursor": "Mostrar o cursor do axente",
|
||||
"Show in folder": "Mostrar no cartafol",
|
||||
"Show the pointer an AI agent moves (#35)": "Mostrar o punteiro que move un axente de IA (#35)",
|
||||
"Show tool at cursor": "Mostrar a ferramenta xunto ao cursor",
|
||||
"Signed axes": "Eixes con signo",
|
||||
"Size": "Tamaño",
|
||||
"Sketch constraints": "Restricións do bosquexo",
|
||||
|
||||
@@ -334,6 +334,7 @@
|
||||
"Show Agent Cursor": "Ügynök kurzorának megjelenítése",
|
||||
"Show in folder": "Megjelenítés a mappában",
|
||||
"Show the pointer an AI agent moves (#35)": "Az AI-ügynök által mozgatott mutató megjelenítése (#35)",
|
||||
"Show tool at cursor": "Eszköz megjelenítése a kurzornál",
|
||||
"Signed axes": "Előjeles tengelyek",
|
||||
"Size": "Méret",
|
||||
"Sketch constraints": "Vázlatkényszerek",
|
||||
|
||||
@@ -334,6 +334,7 @@
|
||||
"Show Agent Cursor": "Tampilkan Kursor Agen",
|
||||
"Show in folder": "Tampilkan di folder",
|
||||
"Show the pointer an AI agent moves (#35)": "Tampilkan penunjuk yang digerakkan agen AI (#35)",
|
||||
"Show tool at cursor": "Tampilkan alat di dekat kursor",
|
||||
"Signed axes": "Sumbu bertanda",
|
||||
"Size": "Ukuran",
|
||||
"Sketch constraints": "Batasan sketsa",
|
||||
|
||||
@@ -338,6 +338,7 @@
|
||||
"Show Agent Cursor": "Mostra cursore dell'agente",
|
||||
"Show in folder": "Mostra nella cartella",
|
||||
"Show the pointer an AI agent moves (#35)": "Mostra il puntatore mosso da un agente IA (#35)",
|
||||
"Show tool at cursor": "Mostra lo strumento accanto al cursore",
|
||||
"Signed axes": "Assi con segno",
|
||||
"Size": "Dimensioni",
|
||||
"Sketch constraints": "Vincoli dello schizzo",
|
||||
|
||||
@@ -477,6 +477,7 @@
|
||||
"Show ghost": "ゴーストを表示",
|
||||
"Show in folder": "フォルダに表示",
|
||||
"Show the pointer an AI agent moves (#35)": "エージェントが操作するポインターを表示 (#35)",
|
||||
"Show tool at cursor": "カーソルの横にツールを表示",
|
||||
"Signed axes": "符号付き座標軸",
|
||||
"Size": "サイズ",
|
||||
"Sketch constraints": "スケッチ拘束",
|
||||
|
||||
@@ -436,6 +436,7 @@
|
||||
"Show Agent Cursor": "에이전트 커서 표시",
|
||||
"Show in folder": "폴더에서 보기",
|
||||
"Show the pointer an AI agent moves (#35)": "AI 에이전트가 움직이는 포인터 표시 (#35)",
|
||||
"Show tool at cursor": "커서 옆에 도구 표시",
|
||||
"Signed axes": "부호 있는 축",
|
||||
"Size": "크기",
|
||||
"Sketch constraints": "스케치 구속 조건",
|
||||
|
||||
@@ -335,6 +335,7 @@
|
||||
"Show Agent Cursor": "Papar Kursor Ejen",
|
||||
"Show in folder": "Papar dalam folder",
|
||||
"Show the pointer an AI agent moves (#35)": "Papar penuding yang digerakkan oleh ejen AI (#35)",
|
||||
"Show tool at cursor": "Tunjukkan alat di sebelah kursor",
|
||||
"Signed axes": "Paksi bertanda",
|
||||
"Size": "Saiz",
|
||||
"Sketch constraints": "Kekangan lakaran",
|
||||
|
||||
@@ -334,6 +334,7 @@
|
||||
"Show Agent Cursor": "Agentcursor tonen",
|
||||
"Show in folder": "Tonen in map",
|
||||
"Show the pointer an AI agent moves (#35)": "De aanwijzer tonen die een AI-agent verplaatst (#35)",
|
||||
"Show tool at cursor": "Gereedschap bij de cursor tonen",
|
||||
"Signed axes": "Assen met teken",
|
||||
"Size": "Grootte",
|
||||
"Sketch constraints": "Schetsbeperkingen",
|
||||
|
||||
@@ -352,6 +352,7 @@
|
||||
"Show Agent Cursor": "Pokaż kursor agenta",
|
||||
"Show in folder": "Pokaż w folderze",
|
||||
"Show the pointer an AI agent moves (#35)": "Pokaż wskaźnik poruszany przez agenta AI (#35)",
|
||||
"Show tool at cursor": "Pokaż narzędzie przy kursorze",
|
||||
"Signed axes": "Osie ze znakiem",
|
||||
"Size": "Rozmiar",
|
||||
"Sketch constraints": "Wiązania szkicu",
|
||||
|
||||
@@ -335,6 +335,7 @@
|
||||
"Show Agent Cursor": "Mostrar cursor do agente",
|
||||
"Show in folder": "Mostrar na pasta",
|
||||
"Show the pointer an AI agent moves (#35)": "Mostrar o ponteiro que um agente de IA move (#35)",
|
||||
"Show tool at cursor": "Mostrar a ferramenta junto ao cursor",
|
||||
"Signed axes": "Eixos com sinal",
|
||||
"Size": "Tamanho",
|
||||
"Sketch constraints": "Restrições do esboço",
|
||||
|
||||
@@ -334,6 +334,7 @@
|
||||
"Show Agent Cursor": "Afișează cursorul agentului",
|
||||
"Show in folder": "Afișează în dosar",
|
||||
"Show the pointer an AI agent moves (#35)": "Afișează indicatorul pe care îl mută un agent AI (#35)",
|
||||
"Show tool at cursor": "Afișează instrumentul lângă cursor",
|
||||
"Signed axes": "Axe cu semn",
|
||||
"Size": "Dimensiune",
|
||||
"Sketch constraints": "Constrângerile schiței",
|
||||
|
||||
@@ -334,6 +334,7 @@
|
||||
"Show Agent Cursor": "Показывать курсор агента",
|
||||
"Show in folder": "Показать в папке",
|
||||
"Show the pointer an AI agent moves (#35)": "Показывать указатель, которым двигается ИИ-агент (#35)",
|
||||
"Show tool at cursor": "Показывать инструмент у курсора",
|
||||
"Signed axes": "Знаковые оси",
|
||||
"Size": "Размер",
|
||||
"Sketch constraints": "Ограничения эскиза",
|
||||
|
||||
@@ -334,6 +334,7 @@
|
||||
"Show Agent Cursor": "Visa agentmarkör",
|
||||
"Show in folder": "Visa i mapp",
|
||||
"Show the pointer an AI agent moves (#35)": "Visa pekaren som en AI-agent flyttar (#35)",
|
||||
"Show tool at cursor": "Visa verktyget vid markören",
|
||||
"Signed axes": "Axlar med tecken",
|
||||
"Size": "Storlek",
|
||||
"Sketch constraints": "Skissvillkor",
|
||||
|
||||
@@ -334,6 +334,7 @@
|
||||
"Show Agent Cursor": "Ajan imlecini göster",
|
||||
"Show in folder": "Klasörde göster",
|
||||
"Show the pointer an AI agent moves (#35)": "Bir AI ajanının hareket ettirdiği imleci göster (#35)",
|
||||
"Show tool at cursor": "Aracı imlecin yanında göster",
|
||||
"Signed axes": "İşaretli eksenler",
|
||||
"Size": "Boyut",
|
||||
"Sketch constraints": "Eskiz kısıtlamaları",
|
||||
|
||||
@@ -335,6 +335,7 @@
|
||||
"Show Agent Cursor": "Показати курсор агента",
|
||||
"Show in folder": "Показати в теці",
|
||||
"Show the pointer an AI agent moves (#35)": "Показувати вказівник, яким рухає ШІ-агент (#35)",
|
||||
"Show tool at cursor": "Показувати інструмент біля курсора",
|
||||
"Signed axes": "Підписані осі",
|
||||
"Size": "Розмір",
|
||||
"Sketch constraints": "Обмеження ескізу",
|
||||
|
||||
@@ -335,6 +335,7 @@
|
||||
"Show Agent Cursor": "Hiển thị con trỏ của AI Agent",
|
||||
"Show in folder": "Hiển thị trong thư mục",
|
||||
"Show the pointer an AI agent moves (#35)": "Hiển thị con trỏ do AI Agent điều khiển (#35)",
|
||||
"Show tool at cursor": "Hiển thị công cụ cạnh con trỏ",
|
||||
"Signed axes": "Các trục có dấu (+/-)",
|
||||
"Size": "Kích thước",
|
||||
"Sketch constraints": "Ràng buộc phác thảo",
|
||||
|
||||
@@ -334,6 +334,7 @@
|
||||
"Show Agent Cursor": "顯示代理游標",
|
||||
"Show in folder": "在資料夾中顯示",
|
||||
"Show the pointer an AI agent moves (#35)": "顯示 AI 代理移動的指標(#35)",
|
||||
"Show tool at cursor": "在游標旁顯示工具",
|
||||
"Signed axes": "帶符號軸",
|
||||
"Size": "大小",
|
||||
"Sketch constraints": "草圖拘束條件",
|
||||
|
||||
@@ -477,6 +477,7 @@
|
||||
"Show ghost": "显示虚影",
|
||||
"Show in folder": "在文件夹中显示",
|
||||
"Show the pointer an AI agent moves (#35)": "显示 AI 代理移动的指针(#35)",
|
||||
"Show tool at cursor": "在光标旁显示工具",
|
||||
"Signed axes": "带符号轴",
|
||||
"Size": "大小",
|
||||
"Sketch constraints": "草图约束",
|
||||
|
||||
@@ -612,6 +612,11 @@ fn fits(a: Accept, s: &Sel) -> bool {
|
||||
}
|
||||
|
||||
impl Dialog {
|
||||
/// The command this dialog runs, whose icon and label its header shows.
|
||||
pub(crate) fn command(&self) -> Option<&'static str> {
|
||||
dense::command(&self.kind)
|
||||
}
|
||||
|
||||
/// Show why OK (or starting the sketch) was refused, for as long as the inputs stay as they are.
|
||||
fn refuse(&mut self, app: &SolveApp, error: String) {
|
||||
self.refused = Some(Refused::now(app, self));
|
||||
|
||||
@@ -250,6 +250,7 @@ mod thin_extrude_tests;
|
||||
pub mod timeline;
|
||||
pub mod timeline_left;
|
||||
pub mod titlebar;
|
||||
pub mod tool_cursor;
|
||||
pub mod tool_modifiers;
|
||||
pub mod toolbar;
|
||||
pub mod toolbar_custom;
|
||||
@@ -306,6 +307,9 @@ pub struct UiState {
|
||||
pub up_axis: solidcraft_engine::render::UpAxis,
|
||||
/// The agent cursor: shown, speed, follow camera (#35).
|
||||
pub agent_cursor: agent_cursor::Settings,
|
||||
/// The running tool's icon rides beside the pointer in the viewport (View settings; off by
|
||||
/// default).
|
||||
pub tool_cursor: bool,
|
||||
}
|
||||
|
||||
impl Default for UiState {
|
||||
@@ -327,6 +331,7 @@ impl Default for UiState {
|
||||
ground_shadow: true,
|
||||
up_axis: Default::default(),
|
||||
agent_cursor: Default::default(),
|
||||
tool_cursor: false,
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
@@ -0,0 +1,172 @@
|
||||
//! The tool at the cursor: while an interactive tool or a command's dialog is running, its
|
||||
//! toolbar icon rides above and right of the pointer in the viewport (clear of the sketch tools'
|
||||
//! coordinate readout below it), so the user sees which command the
|
||||
//! next click goes to without looking up at the ribbon. It shows only while the pointer is over
|
||||
//! the model itself (not over a panel, a dialog or a menu) and hides while the camera moves.
|
||||
//! Off by default; View settings ("Show tool at cursor") or `ui.set {"toolCursor": true}` turn
|
||||
//! it on.
|
||||
//! It is UI only: drawing it runs no command and changes nothing in the design.
|
||||
|
||||
use egui::{Pos2, Rect, Stroke, Vec2, pos2, vec2};
|
||||
|
||||
use crate::SolveApp;
|
||||
use crate::theme::Tokens;
|
||||
|
||||
/// The badge's side and the icon inside it, in points.
|
||||
const BADGE: f32 = 26.0;
|
||||
const ICON: f32 = 20.0;
|
||||
/// The badge sits above and right of the pointer's hot spot: the system arrow hangs below and
|
||||
/// right of it, and so does the sketch tools' coordinate readout (`tools::preview`, drawn from
|
||||
/// [`READOUT`] below right). From the hot spot to the badge's bottom-left corner:
|
||||
const OFFSET: Vec2 = vec2(12.0, -8.0);
|
||||
/// Where the sketch tools' coordinate readout starts, down and right of the hot spot.
|
||||
const READOUT: f32 = 10.0;
|
||||
/// The gap to the hot spot when the badge flips to the left of the pointer.
|
||||
const FLIPPED_GAP: f32 = 6.0;
|
||||
|
||||
/// The command whose tool or dialog is running: the one a click in the viewport goes to.
|
||||
pub(crate) fn command(app: &SolveApp) -> Option<&'static str> {
|
||||
match (&app.tool, &app.dialog) {
|
||||
(Some(tool), _) => Some(tool.cmd),
|
||||
(None, Some(dialog)) => dialog.command(),
|
||||
_ => None,
|
||||
}
|
||||
}
|
||||
|
||||
/// The icon the badge shows: None when it is turned off, nothing runs, or the command has no icon.
|
||||
pub(crate) fn icon(app: &SolveApp) -> Option<&'static str> {
|
||||
if !app.ui.tool_cursor {
|
||||
return None;
|
||||
}
|
||||
command(app).and_then(solidcraft_engine::find_command).map(|spec| spec.icon).filter(|icon| !icon.is_empty())
|
||||
}
|
||||
|
||||
/// The badge for a pointer at `at`: above and right of it, so it never covers the coordinate
|
||||
/// readout below. Near the right edge of `bounds` it moves to the left of the pointer; with no
|
||||
/// room above, it drops below the readout's line (`readout_height` high), never onto it.
|
||||
fn badge_rect(at: Pos2, bounds: Rect, readout_height: f32) -> Rect {
|
||||
let mut min = pos2(at.x + OFFSET.x, at.y + OFFSET.y - BADGE);
|
||||
if min.x + BADGE > bounds.right() {
|
||||
min.x = at.x - FLIPPED_GAP - BADGE;
|
||||
}
|
||||
if min.y < bounds.top() {
|
||||
min.y = at.y + READOUT + readout_height + FLIPPED_GAP;
|
||||
}
|
||||
Rect::from_min_size(min, vec2(BADGE, BADGE))
|
||||
}
|
||||
|
||||
/// Draw the badge for a pointer at `at` (None: the pointer is not over the model).
|
||||
pub(crate) fn show(app: &SolveApp, painter: &egui::Painter, at: Option<Pos2>) {
|
||||
let (Some(at), Some(icon)) = (at, icon(app)) else { return };
|
||||
let t = Tokens::get();
|
||||
// The readout's line height, as `tools::preview` lays it out.
|
||||
let readout = painter.layout_no_wrap("0".into(), egui::FontId::proportional(t.font_small), t.text_dim).size().y;
|
||||
let r = badge_rect(at, painter.clip_rect(), readout);
|
||||
painter.rect(r, t.radius_sm, t.panel.gamma_multiply(0.92), Stroke::new(1.0, t.border), egui::StrokeKind::Inside);
|
||||
crate::icons::paint_icon(painter, Rect::from_center_size(r.center(), vec2(ICON, ICON)), icon, 1.0);
|
||||
crate::scenario::publish_rect("viewport:tool_cursor", r);
|
||||
}
|
||||
|
||||
#[cfg(test)]
|
||||
mod tests {
|
||||
use super::*;
|
||||
use crate::scenario::{Harness, rect_of};
|
||||
use serde_json::json;
|
||||
|
||||
/// Rest the pointer on the middle of the viewport; the badge drawn there, if any.
|
||||
fn hover_middle(h: &mut Harness) -> (Pos2, Option<Rect>) {
|
||||
let c = h.app.viewport.rect.map(|r| r.center()).unwrap();
|
||||
h.step(&json!({"move": [c.x, c.y]})).unwrap();
|
||||
h.frames(2);
|
||||
(c, rect_of("viewport:tool_cursor"))
|
||||
}
|
||||
|
||||
fn icon_of(id: &str) -> &'static str {
|
||||
solidcraft_engine::find_command(id).unwrap().icon
|
||||
}
|
||||
|
||||
#[test]
|
||||
fn badge_shows_the_running_tool_beside_the_pointer() {
|
||||
let mut h = Harness::new();
|
||||
h.settle();
|
||||
// Off by default: a running tool shows no badge until View settings turn it on.
|
||||
assert!(!h.app.ui.tool_cursor, "the badge is on by default");
|
||||
h.step(&json!({"start": "sketch.create"})).unwrap();
|
||||
let (_, badge) = hover_middle(&mut h);
|
||||
assert!(badge.is_none(), "off by default, yet a badge is drawn at {badge:?}");
|
||||
h.step(&json!({"key": "Escape"})).unwrap();
|
||||
h.settle();
|
||||
// Turned on with the checkbox in the navigation bar's View settings.
|
||||
h.step(&json!({"click": {"handle": "nav:view"}})).unwrap();
|
||||
h.frames(2);
|
||||
h.step(&json!({"click": {"handle": "view:tool_cursor"}})).unwrap();
|
||||
h.step(&json!({"click": {"handle": "nav:view"}})).unwrap();
|
||||
h.frames(2);
|
||||
assert!(h.app.ui.tool_cursor, "the View settings checkbox did not turn the badge on");
|
||||
let (_, badge) = hover_middle(&mut h);
|
||||
assert!(badge.is_none(), "no tool runs, yet a badge is drawn at {badge:?}");
|
||||
|
||||
// A dialog: Create Sketch waits for a plane.
|
||||
h.step(&json!({"start": "sketch.create"})).unwrap();
|
||||
let (at, badge) = hover_middle(&mut h);
|
||||
assert_eq!(icon(&h.app), Some(icon_of("sketch.create")));
|
||||
let badge = badge.unwrap();
|
||||
assert_eq!(badge.left_bottom(), at + OFFSET, "the badge sits above and right of the pointer");
|
||||
|
||||
// An interactive sketch tool.
|
||||
h.step(&json!({"click": {"plane": "XY"}})).unwrap();
|
||||
h.settle();
|
||||
h.step(&json!({"start": "sketch.circle.center"})).unwrap();
|
||||
let (at, badge) = hover_middle(&mut h);
|
||||
assert_eq!(icon(&h.app), Some(icon_of("sketch.circle.center")));
|
||||
let badge = badge.unwrap();
|
||||
// The coordinate readout starts READOUT below and right of the pointer: no overlap.
|
||||
assert!(badge.bottom() < at.y + READOUT, "the badge {badge:?} covers the readout under {at:?}");
|
||||
|
||||
// Turned off in View settings.
|
||||
h.app.ui.tool_cursor = false;
|
||||
let (_, badge) = hover_middle(&mut h);
|
||||
assert!(badge.is_none(), "turned off, yet a badge is drawn at {badge:?}");
|
||||
h.app.ui.tool_cursor = true;
|
||||
|
||||
// Over the window's top edge, outside the viewport: nothing.
|
||||
h.step(&json!({"move": [4.0, 4.0]})).unwrap();
|
||||
h.frames(2);
|
||||
assert!(rect_of("viewport:tool_cursor").is_none(), "a badge is drawn outside the viewport");
|
||||
|
||||
// Escape ends the tool.
|
||||
h.step(&json!({"key": "Escape"})).unwrap();
|
||||
h.settle();
|
||||
assert!(h.app.tool.is_none() && h.app.dialog.is_none(), "Escape left {:?} running", command(&h.app));
|
||||
let (_, badge) = hover_middle(&mut h);
|
||||
assert!(badge.is_none(), "the tool ended, yet a badge is drawn at {badge:?}");
|
||||
}
|
||||
|
||||
/// Wherever the pointer is, the badge stays inside the viewport and off the coordinate
|
||||
/// readout (the rectangle from READOUT below right of the pointer, one line high).
|
||||
#[test]
|
||||
fn badge_stays_inside_the_viewport_and_off_the_readout() {
|
||||
let bounds = Rect::from_min_size(Pos2::ZERO, vec2(800.0, 600.0));
|
||||
let line = 14.0;
|
||||
let middle = Pos2::new(400.0, 300.0);
|
||||
assert_eq!(badge_rect(middle, bounds, line).left_bottom(), middle + OFFSET);
|
||||
for at in [middle, pos2(795.0, 300.0), pos2(400.0, 5.0), pos2(795.0, 5.0), pos2(5.0, 595.0), pos2(795.0, 595.0)] {
|
||||
let badge = badge_rect(at, bounds, line);
|
||||
assert!(bounds.contains_rect(badge), "at {at:?}: {badge:?} leaves {bounds:?}");
|
||||
let readout = Rect::from_min_size(at + vec2(READOUT, READOUT), vec2(120.0, line));
|
||||
assert!(!badge.intersects(readout), "at {at:?}: {badge:?} covers the readout {readout:?}");
|
||||
assert!(!badge.contains(at), "at {at:?}: {badge:?} covers the hot spot");
|
||||
}
|
||||
}
|
||||
|
||||
/// Every interactive tool's command has an icon to show.
|
||||
#[test]
|
||||
fn every_interactive_tool_has_a_badge_icon() {
|
||||
let missing: Vec<&str> = solidcraft_engine::command_specs()
|
||||
.iter()
|
||||
.filter_map(|spec| crate::tools::Tool::for_command(spec.id).map(|tool| tool.cmd))
|
||||
.filter(|cmd| solidcraft_engine::find_command(cmd).is_none_or(|spec| spec.icon.is_empty()))
|
||||
.collect();
|
||||
assert!(missing.is_empty(), "tools without a badge icon: {missing:?}");
|
||||
}
|
||||
}
|
||||
@@ -3665,6 +3665,15 @@ pub fn show(app: &mut SolveApp, ui: &mut egui::Ui) {
|
||||
let picture = crate::space_mouse_model::corner_rect(area, position, &obstacles);
|
||||
crate::space_mouse_model::corner(ui, picture, calibration, app.space_mouse.raw.into());
|
||||
}
|
||||
// Last, so it sits over the overlays; only where a click would reach the model.
|
||||
let badge_at = hover.filter(|p| {
|
||||
inside
|
||||
&& !navigating
|
||||
&& resp.hovered()
|
||||
&& ui.ctx().layer_id_at(*p).is_none_or(|layer| layer == ui.layer_id())
|
||||
&& !crate::shell::covered(app, *p)
|
||||
});
|
||||
crate::tool_cursor::show(app, &painter, badge_at);
|
||||
}
|
||||
|
||||
fn paint_box_selection(painter: &egui::Painter, bx: BoxSel, sketch: bool) {
|
||||
@@ -4760,8 +4769,8 @@ fn nav_bar(app: &mut SolveApp, ui: &mut egui::Ui, rect: Rect) {
|
||||
ui.data_mut(|d| d.insert_temp(menu_id, menu_open));
|
||||
}
|
||||
|
||||
/// The View settings above the navigation bar's last button: grid, ground shadow and the agent
|
||||
/// cursor (#35). False once it should close (a click outside it).
|
||||
/// The View settings above the navigation bar's last button: grid, ground shadow, the tool at
|
||||
/// the cursor and the agent cursor (#35). False once it should close (a click outside it).
|
||||
fn view_menu(app: &mut SolveApp, ui: &mut egui::Ui, button: Rect) -> bool {
|
||||
let t = crate::theme::Tokens::get();
|
||||
// A preset dropdown extends beyond this menu; let it consume its own clicks.
|
||||
@@ -4781,6 +4790,8 @@ fn view_menu(app: &mut SolveApp, ui: &mut egui::Ui, button: Rect) -> bool {
|
||||
crate::ui_kit::checkbox(ui, crate::i18n::tr_label("Grid"), &mut app.ui.show_grid);
|
||||
crate::ui_kit::checkbox(ui, crate::i18n::tr_label("Ground shadow"), &mut app.ui.ground_shadow);
|
||||
crate::prefs::ambient_occlusion_checkbox(app, ui, "Ambient occlusion");
|
||||
let tool = crate::ui_kit::checkbox(ui, crate::i18n::tr_label("Show tool at cursor"), &mut app.ui.tool_cursor);
|
||||
crate::scenario::publish_handle("view:tool_cursor", tool.rect.center());
|
||||
ui.separator();
|
||||
let s = &mut app.ui.agent_cursor;
|
||||
let show = crate::ui_kit::checkbox(ui, crate::i18n::tr_label("Show Agent Cursor"), &mut s.show);
|
||||
|
||||
Reference in New Issue
Block a user