Commit Graph

2454 Commits

Author SHA1 Message Date
yhamil04 a3483ed451 Body rename: an imported assembly's other bodies keep their names and components (#2175) (#6615)
* claim: #2175

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Body rename: an imported assembly's other bodies keep their names and components (#2175)

An Import keeps its body names by the file's body index, and builds no body for the
file's later instances of a repeated part (`skip`). Renaming a body stored the names by
the body's place in the model instead, so every name after the first skipped instance
landed one slot early (and the new name could land on a skipped slot). The rename looked
right until the design was rebuilt; then those bodies took other names, dropped out of
their components and showed up loose in the import's top component.

`Feature::body_name_slots` maps the bodies a feature builds to their stored slots, and
`Feature::pin_body_names` stores current names through it. The rename, the pinning of
later features' names (rename and suppress) and `Document::body_rename_from` use them.

Fixes #2175

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 11:10:39 +00:00
yhamil04 d7252f2240 Sketch: constrain to an edge of any body, a mirrored copy too (#6348) (#6617)
* claim: #6348

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: constrain to an edge of any body, a mirrored copy too (#6348)

A constraint tool ignored a click on a body edge, so only edges already in
the sketch (the face it sits on) could be constrained to; a mirrored copy's
edges never were. Constraint commands now take a model edge or vertex
({edge|vertex: [x,y,z], body?}) for an operand and project it first, in the
same undo step, and the pick tools pass a clicked edge or vertex that way.
The link keeps the edge's persistent name, so the constraint follows rebuilds.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 11:10:35 +00:00
raykholo 30e9b87b48 Render workspace uses the window's graphics backend on Windows (#6592) (#6629)
* claim: #6592

* Keep Windows Render setup on the viewport backend
2026-10-26 11:10:32 +00:00
github-actions[bot] b20f522f5d Regenerate generated files and fold pending files [skip ci] 2026-10-26 16:34:07 +00:00
Mateusz Sych d895fef354 Control channel: a pushed design.changed event for clients that subscribe (#6985) (#6986)
* claim: #6646

* Control channel: document.revision, a design revision and a document id (#6646)

A program that follows the open design asks document.revision and exports
only when the answer moves: document_id names the open design (kept through
edits, saves and renames, another for each design started or opened, never
shared between two tabs or two runs) and revision moves whenever the design,
what is hidden or an uncaptured component position changes. It stays put on
reads, selections and view changes, unlike the session's view revision.

The revision is read lazily: the session remembers the design it last
reported (held weakly, so Arc::make_mut can never change it in place and its
address can't be reused) and takes a new number from one counter for the
whole run when the design is another one. The control method answers at once,
also while a slow command computes; engine.execute reaches the same command
for scripts and MCP.

* document.revision: hash the run's id prefix with the process's random keys

A clock set before 1970 gave every run the prefix 0, so a restarted app could
answer a new design with the id and revision of the old one. The docs no
longer promise an answer at once: a screenshot waiting for an opened design to
be meshed still holds the requests behind it.

* document.revision: its label in the complete catalogs (ja, zh)

* claim: #6985

* Control channel: control.subscribe and design.changed events (#6985)

A connection that sends control.subscribe gets the active design's id and
revision in the reply (as document.revision answers), then a
{"event":"design.changed","params":{document_id, revision}} line whenever
either changes, so a live link need not poll.

The window publishes the design at the end of each frame's logic and
drawing while a connection is subscribed (one atomic load otherwise). Each
subscribed connection waits on that from a thread of its own and writes
the latest after a 100 ms gap, so a burst of changes is one line. Replies
and events share one lock per connection, each written whole (#6390).

* control.subscribe: the reply before any event, a second one refused

The events thread started before the subscribe reply was written, so a
change right after the window's answer could reach the client before the
reply that named the older revision. The subscription now starts holding
the connection's line lock and writes the reply under it.

A second control.subscribe on a subscribed connection is refused on the
connection itself: its answer could arrive behind a newer event. When no
thread or socket is left for the events, the reply says it did not
subscribe instead of ok.

* control.subscribe: a second one does not lose a finished late reply

The already-subscribed answer came before the busy check, so a request that timed out and had finished since lost its reply: control.pending then said the app ended it without one. It now comes after the busy check and drops a finished late reply as every other request does.

* control_server: declare the subscribe guard at the top of the loop

Clear of the lines #6643 changes (its token check moves to where the declaration was).

* control_server: the subscription's items beside serve

Away from the lines next to send, where #6643 adds token_of.

* control test: New on a blank design reuses its tab, so redo the box first

---------

Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
2026-10-26 11:10:03 +00:00
Dahak Builds 070b1414ee Fix manual vertical/horizontal constraints with circle centre (#617) (#6928)
* claim: #617

* fix(sketch): manual Horizontal/Vertical between a circle centre and an edge (#617)

The manual H/V tool silently did nothing when a point and a straight line
were picked or selected together (only two points or a lone line worked),
while auto-constrain inference applied the alignment. A point picked or
selected with a straight line now aligns the point with the line's
midpoint, in the mode the line's dominant axis suggests, through the
existing midpoint alignment in sketch.constraint.horizontal_vertical.

- tools: constraint_preselection consumes [point, line] selections; the
  interactive tool applies the alignment on the second pick (a line).
- context menu: Horizontal/Vertical Constraint items for point + line.
- engine + ui regression tests pin centre-edge alignment and the
  edge-to-centre dimension from #617.

Written by Qwen.

* style: formatting cleanup for #617 files

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-10-26 11:09:52 +00:00
n0tfr3shm1lk 111c662fe4 Extend: join a stop that is already another curve's end (#6863) (#6865)
* Extend: join a stop that is already another curve's end

sketch.extend refused a target that coincided with another curve's end
("the extension target coincides with existing geometry") instead of
extending onto that point. The stop is now joined: a new line ends on the
existing point, and a free end grows onto it held by a Coincident. The
preview shows that stop too, so the line it draws is the line the click adds.

A stop at the end of a spline or conic joins that end the same way, and
extending an infinite line now refuses instead of moving one of its two
points.

🤖 Generated with Codebuff
Co-Authored-By: Codebuff <noreply@codebuff.com>

* Extend: close an arc, take an equal stop, preview with the command's search

An arc with nothing on its path now grows all the way to its own far end and
closes into a whole circle instead of reporting that there is nothing to
extend to.

Two curves stopping the extension equally far are both on the way, so the first
stop is taken instead of refusing to choose between them.

The line preview and the command now share one stop search (`line_aim`), so the
preview can no longer draw a line the click refuses.

---------

Co-authored-by: n0tfr3shm1lk <n0tfr3shm1lk@ukr.net>
Co-authored-by: Codebuff <noreply@codebuff.com>
2026-10-26 11:09:42 +00:00
Dahak Builds ab709e6c46 Add base-height and new-body options to Snap Fit (#1994) (#6911)
* claim: #1994

* plastic.snap_fit: base_height and new_body options (#1994)

Base Height extends the snap fit's base below the picked face; New Body
makes the snap fit its own body so it can be patterned or moved. Both
optional, serde-defaulted, old designs replay identically.

* ui: snap_fit length-field defaults list gains the optional base height

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-10-26 11:09:30 +00:00
Colin Faulkingham 03bf992bc1 Keep linked components valid through Undo after Save As (#6860) (#6877)
* claim: #6860

* fix: preserve linked component targets across Save As history (#6860)
2026-10-26 11:08:32 +00:00
tr1pp4 25ad6c7266 Browser: a feature's menu edits its profile sketch, suppresses and rolls back (#6673) (#6674)
* Browser: a feature row edits its profile sketch, suppresses and rolls back

A sketch button on feature rows with a profile sketch, and the feature menu gains
Edit Profile Sketch, Suppress/Unsuppress and Roll Back Here. Features behind the
history marker or suppressed are drawn faint, as in the timeline.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Browser: the sketch button sits right after the feature's name

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 11:05:38 +00:00
HiroKenEz cfb3f52aec cli_link: the symlink test runs on Unix only, so the UI tests build on Windows (#6545) (#6546)
* claim: #6545

* cli_link: the Unix-only link code and its test build on Unix only, so the UI crate builds on Windows (#6545)

slot() is used only by link_in's Unix version, and links_only_where_it_may
makes its own link with std::os::unix::fs::symlink; gate both like link_in.
On Windows the test failed to compile (E0433) and clippy -D warnings flagged
slot as dead code.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 10:46:43 +00:00
Colin Faulkingham 7c31631ea6 Draft: preserve the selected faces’ body (#6350) (#6446)
* claim: #6350

* fix(ui): preserve the selected faces' body in Draft (#6350)
2026-10-26 10:45:09 +00:00
Frank c13e516cd5 fix: allow SpaceMouse rotation after tilting sketch view (#6687)
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
2026-10-26 10:44:31 +00:00
raykholo c264c7a42a Startup falls back from a Direct3D 12 that can't build the UI pipeline (#6648) (#6682) 2026-10-26 10:44:13 +00:00
HiroKenEz 56f09f3993 Frame rate readout stays beside a right-side pane, not under it (#6755) (#6767)
* claim: #6755

* Frame rate readout stays beside a right-side pane, not under it (#6755)

The readout and its details sat in the viewport's bottom-right corner even under the
floating Assistant. They now move just left of any pane over that corner and come back
when it closes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 10:43:53 +00:00
Dahak Builds 6e63f8bd97 Construct toolbar regression tests: dialogs ask for picks (#204) (#6681)
* claim: #204

* Construct toolbar regression tests: dialogs ask for picks (#204)

* chore: re-trigger checks (defaults line already present in PR body)

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-10-26 10:43:47 +00:00
Christopher Koch b01f361edf AI chat: keep only the newest views in the history, and explain HTTP 413 (#2298) (#2299)
Every view attached to an API-agent message stayed in the history as a
base64 data URL, and the whole history goes with every request (up to 24
per message). Requests grew by one screenshot per message until the
endpoint refused them with HTTP 413, after which every message failed.

Keep the newest two views as pictures and swap older ones for a short note;
the text sent with them and every other message stay. HTTP 413 now says the
conversation is too large for the endpoint and to start a new chat.

Fixes #2298

Main now speaks the Anthropic protocol too, where a view is an `image`
block rather than an OpenAI `image_url` part: drop_old_views trims both,
before trim_history. ui.ai_http_too_large is in every catalog that has the
other ai_http_* messages.

Co-authored-by: Framewrk CI <ci@framewrklabs.ai>
2026-10-26 10:43:30 +00:00
Colin Faulkingham c482dab4a1 Sheet Metal: open the export save picker (#6847) (#6856)
* claim: #6847

* fix(ui): open sheet export save pickers (#6847)
2026-10-26 10:43:01 +00:00
raykholo 189b47c750 Chamfer and Fillet refuse a point where several edges meet (#5173) (#5177) 2026-10-26 10:42:59 +00:00
Colin Faulkingham 1530a8e247 Route left History feature clicks into command dialogs (#6532) (#6734)
* claim: #6532

* Fix History feature picks in command dialogs (#6532)
2026-10-26 10:42:49 +00:00
sascha2101 1d2674ebc4 Sketch: a regular line on a construction line is picked before it (#6396) (#6753)
* claim: #6396

* Sketch: a regular line on a construction line is picked before it (#6396)

Coincident sketch curves tied on pick distance and the one drawn first
won, so a construction line drawn first hid the regular line on part of
it. Construction and centre lines now get half a screen point added to
their pick distance: on a tie the regular curve is hovered and picked,
and a construction line clearly nearer the cursor still wins. Clicking
again and Select Other still reach the construction line.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FN5eEMrqWWXqi65FcK8GXq

---------

Co-authored-by: sascha2101 <221609842+sascha2101@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 10:42:48 +00:00
momysnow 10b5cc5914 GPU: an uncaught error on the window's device is logged, not a panic (#5486) (#5667)
wgpu's default uncaptured-error handler panics ("wgpu error: Out of Memory").
The headless picture devices already report instead; the window's device had
no handler. Errors the code expects stay under error scopes.

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-26 10:42:44 +00:00
Kai Evans 41a938e731 Sketch: a fillet stays the arc of its corner when the corner mirrors or a line is dragged through it (#5677)
A line tangent to an arc at the arc's end had no sense: the tangency held
with the line on either side of its touch point, so pinning a line's far
end across the corner left the line cutting back through its fillet, and
when the solver found the mirrored corner the arc kept its stored
direction and became its three-quarter complement, inside out.

The solver now keeps each fillet an arc of its corner. A line tangent at an
arc's end keeps its sense there (it leaves the arc as it did) and the arc
its side of its chord, compared with the positions before an interactive
move or the stored ones. A corner that mirrored gets its arc on the
mirrored side: its ends swapped where the solve ran the arc round the
other way with the lines following, or the arc reflected across the line
that stayed and solved again where a line cut back through. A solve that
would loop the arc the other way round, or fold a line onto it, is refused
as a fold is. A drag's cursor-following steps keep the fillets too, so a
line dragged through its own fillet stops at the arc.
2026-10-26 10:42:41 +00:00
N3MI-DG 9d0b509961 ui_kit slider: cover egui's own handle at the top of the range (#5708) (#5712)
The kit slider adds a real `egui::Slider`, lets egui paint it, then paints an
opaque rectangle over it and draws the kit's track and thumb on top. That mask
was exactly `slider_width` wide, and egui places its handle so the circle's
right edge lands on `rect.right()` at the maximum, so the fill stopped flush
with the handle and its last column survived as a light sliver beside the
value box. The kit's own thumb cannot hide it either: its radius is
`t.space_8` while egui's handle radius is `input_radius`, about two pixels
larger.

Extend the mask one pixel past its right edge. The gap before the editor is
`item_spacing.x`, so nothing else is covered, and only the maximum was
affected: at the minimum the handle's left edge coincides with the mask's left
edge, which a fill does cover.

Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
2026-10-26 10:42:38 +00:00
sascha2101 7ae17e6dd5 Sketch display: each sketch samples within its own budget (#6524) (#6838)
* claim: #6524

* Sketch display: each sketch samples within its own budget (#6524)

After a large DXF was inserted, lines drawn in a later sketch vanished
once finished: only their end points showed and could be picked, and
hiding the DXF sketch brought them back.

The display cache had one sampling budget for every shown sketch (4096
curves, 131 072 vertices per model state and view). Sketches are drawn
and picked in timeline order, so a large imported drawing used it all
and every later curve came back empty (BudgetLimited): not drawn, not
pickable, while the points, drawn separately, stayed.

Each sketch now has its own budget with the same limits (curves,
profiles, vertices and nodes). The cache as a whole is capped at 65 536
curves and 16 384 profiles, so memory stays bounded however many
sketches are shown.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FN5eEMrqWWXqi65FcK8GXq

---------

Co-authored-by: sascha2101 <221609842+sascha2101@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 10:42:35 +00:00
github-actions[bot] 1cd14e2412 Regenerate generated files and fold pending files [skip ci] 2026-10-26 14:29:06 +00:00
github-actions[bot] 7014b62388 Regenerate generated files and fold pending files [skip ci] 2026-10-26 14:22:28 +00:00
HiroKenEz adc568a715 Context menu: the Appearance flyout closes when the pointer moves to another row (#6657) (#6784)
* claim: #6657

* Context menu: the Appearance flyout closes when the pointer moves to another row (#6657)

Hovering Appearance opened its quick-choice flyout, but resting on a plain
row of the same menu never closed it: only another submenu row replaced it.
Now a flyout closes once the pointer moves onto another row and rests there
for 0.3 s, so a diagonal path to the flyout across a neighbour keeps it open.
A flyout opened with the keys stays open while the pointer is still.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 10:42:32 +00:00
Colin Faulkingham 12b0d9dbff Preserve unchanged results when rolling the timeline (#6008) (#6067)
* claim: #6008

* Reuse rolled-back timeline results after cache eviction
2026-10-26 10:42:32 +00:00
semmelrinde 613903229e Patterns: copies of a To Object extrude follow the face it reaches (#2121) (#6093)
A feature's face points are moved onto their named faces before it is
evaluated, so a To Object extrude follows its target face when an earlier
feature moves it. A pattern's or mirror's copies were built from the
feature as stored, with the face where it was picked: after a gear's disc
was made thicker, the tooth reached the new top but its pattern copies
kept the old height. The copies now use the same moved points; the move
is one helper used in both places.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 10:42:28 +00:00
Jesper We 0c4eb458df macOS 3D mouse: unregister from the driver when the app ends, so the next launch gets the mouse (#6114) (#6115)
* claim: #6114

* macOS 3D mouse: unregister from the driver when the app ends, so the next launch gets the mouse (#6114)
2026-10-26 10:42:25 +00:00
Homero Thompson b00c432ac9 space-mouse: cover the 32-bit usage item (#6138)
Issue #37
2026-10-26 10:42:21 +00:00
Jesper We 8a28d13161 Perspective view as a command, so a 3D mouse button can switch it (#6143)
* claim: Perspective view as a command

* Perspective view as a command, so a 3D mouse button can switch it
2026-10-26 10:42:18 +00:00
NOWN-DEV 74321f8bbd Sketch Intersect: crossings on curved faces lie on the surface; a plane on a top face cuts it (#6272)
* Test: sketch Intersect keeps its exact cuts, crosses curved faces on the surface, cuts on a top face

Intersect's cut of a box, a cylinder, a sphere and a tilted cylinder, as it is on main, pinned.
Two cases where it is not exact: a plane through a cylinder's rim cuts the mesh's chord (its sides
come out at 6.3159 and 6.3085, not the square root of 40; a hole's walls at 25.0122), and a plane
on a body's top face finds nothing ("projects to nothing on this sketch plane").

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

* Sketch Intersect: crossings on curved faces lie on the surface; a plane on a top face cuts it

Problem: the plane cut that sketch Intersect makes of a body's mesh (project::section) took a
crossing on an edge where a curved face meets another (a cylinder's rim on its cap) from the
merged normals, which are undefined at the crease, so it fell on the chord: a cylinder's sides came
out 0.01 mm off and uneven. A plane through a vertex or on a face counted the vertices on it as
below, so a plane on a body's top face crossed no edge and found nothing.

Solution: the crossings are found by section_segments, which section fits as before: an edge where
a curved face meets another takes the curved face's normals, so the crossing lies on its surface;
a vertex within 1e-9 x the mesh's size of the plane is on it, on one side for every edge (below
when the mesh lies on or above the plane, else above), and an edge ending there crosses at that
vertex, which is an exact point for the fit. Each segment keeps its B-rep face, for a section that
groups them by face. Cuts that were exact are unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 10:42:08 +00:00
Colin Faulkingham a67b3bfdf3 Surface Loft: retain profiles from multiple sketches (#6400) (#6844)
* claim: #6400

* fix(ui): retain surface loft profiles across sketches (#6400)
2026-10-26 10:42:05 +00:00
Colin Faulkingham abdf9d79cf Move/Copy: show a handle for the selected rotation axis (#6822) (#6832)
* claim: #6822

* fix(ui): show selected-axis handle for Move Rotate (#6822)
2026-10-26 10:42:01 +00:00
Colin Faulkingham b1bbca97ef Translate the remaining history tooltip text (#4370) (#6905)
* claim: #4370

* fix(ui): translate history tooltips and feature status
2026-10-26 10:41:50 +00:00
Homero Thompson 2ec11cfc3a Docs: how to open the macOS build when the Gatekeeper blocks it (#5393) (#6566)
* claim: #5393

* docs: how to open the macOS build when the Gatekeeper blocks it (#5393)
2026-10-26 10:41:32 +00:00
github-actions[bot] 2205955329 Regenerate generated files and fold pending files [skip ci] 2026-10-26 13:52:28 +00:00
bherbruck bd9d0778f6 CI: keep lavapipe's shader cache for the GPU path tests (#7113)
The first test in each GPU path shard compiles the path pipeline cold
on lavapipe (335-502 s on 16 vCPU, 665 s on 8, against the 600 s setup
budget); the later ones read Mesa's disk cache in about 30 s. Put that
cache on a sticky disk that main commits, so the first test reads it
too until the shaders change.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 09:49:34 -04:00
cronos a0f7529fd6 fix(measure): select imported mesh outlines and endpoints (#7033) 2026-10-26 10:40:41 +00:00
Lars Jansen 4a0d519727 View: OK and Cancel in the corner of the view while a dialog or sketch is open (#6709) (#6714)
* claim: #6709

* feat(view): OK and Cancel in the corner of the view while a dialog or sketch is open (#6709)
2026-10-26 10:40:36 +00:00
Kai Evans ffbcdc614c History and parameter changes: the run here takes every result computed ahead (#7002)
A change computed off the window thread ran here with only the results of the evaluation
ahead's last evaluate primed. A parameter change evaluates twice (before and after its sketch
stores the new solution), so its first evaluate here found nothing to take, and on a design whose
states pass the evaluation cache's budget it recomputed the features on the window thread: the
window froze for seconds after Computing ended. The run now also takes what the evaluation ahead
kept (KeptResults, as an agent's control requests already do).
2026-10-26 10:40:33 +00:00
Thosch 06af6e1107 Pattern dialogs: Quantity is the count in every language, the motion plot keeps its own entry (#6538) (#6733)
The catalogue entry Quantity served both the pattern dialogs' number of
instances and the motion study's plotted quantity. Nine locales had
translated the second meaning, so the rectangular pattern dialog showed
e.g. "Größe" above "Anzahl 2" in German.

The motion study's row now reads motion.plot_quantity (a pending file
that keeps every locale's previous word there). Quantity takes each
catalogue's own ui.quantity text, which the "Quantity 2" row already
shows; nothing is newly translated. The glossary lists Quantity under
words with more than one meaning.

Fixes #6538

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 10:40:26 +00:00
bherbruck 84b1aeecae CI: GPU path tests in four shards on 16 vCPU (#7096)
On 8 vCPU the first merge-queue run after #7066 failed: one gpu path
test went past the 600 s pipeline-setup budget (665 s; 204 s for the
same test on the PR run) and shard 2 took 35 minutes. lavapipe compiles
on every core, so the shards move to 16 vCPU, and four count partitions
(27 tests each) replace three hash ones (41/40/27).

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 09:23:41 -04:00
bherbruck a6354dfec5 CI: GPU path tests in three shards of their own; Windows in the queue only when a group touches it (#7066)
The 108 gpu path:: tests run one at a time (gpu-path test group) and took
about 36 of Native Linux tests' 45 minutes in a merge-queue run. They now
run in a GPU path tests job, three hash partitions on 8 vCPU, beside the
other tests; Native Linux tests leaves exactly them out. A `gpu` output of
Select checks drives both the job's `if` and the `ci` check.

The Windows jobs now run in a merge group only when its diff reaches what
they exercise (the pull request patterns and the Cargo.lock graphics-stack
check), not on pushes to main, and still nightly and by hand.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 08:22:53 -04:00
sascha2101 8108646e2c Docs: a sketch family's shortcut starts the variant used last (Refs #6630) (#6817)
Since #4308, L, R and C start their family in the variant used last, as
the toolbar button does, so L can start a Midpoint Line. The shortcuts
table still read "L | Line". Say so under the table and in the
sketching guide's Geometry section, with the preference that steps
through the variants.


Claude-Session: https://claude.ai/code/session_01FN5eEMrqWWXqi65FcK8GXq

Co-authored-by: sascha2101 <221609842+sascha2101@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 10:39:51 +00:00
Victor Santos Oliveira b3cbbe7bd5 CLI: reject incomplete and unsupported run/eval options (#6918) (#6919)
* claim: #6918 validate run and eval options

* fix(cli): reject invalid run and eval options (#6918)
2026-10-26 10:38:56 +00:00
Mishung ae2d2145b2 CONTRIBUTING: the desktop app runs on macOS too (#4535)
The README and docs/downloads.md ship a universal macOS disk image, but the
contributing guide listed only Windows and Linux.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 10:24:50 +00:00
Basil a800a40099 Fix Snap smoke startup race before viewport readiness (#5346) 2026-10-26 10:24:40 +00:00