Commit Graph

1981 Commits

Author SHA1 Message Date
bherbruck 4d61100534 Release 0.23.1: version bump, design format 38 (#7035)
The component colour tests no longer assume a design always carries a list of
pending format changes; once the release folds them, there is none.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 07:07:18 -04:00
Homero Thompson 4ced1d7bcf Viewport: the grid fades with the distance instead of cutting off (#4214) (#4629)
* claim: #4214

* Viewport: the grid fades with the distance instead of cutting off (#4214)

The ground grid stopped at a fixed distance from the view, so its edge showed
as a cut across the picture. It now fades out with the distance from the
middle of the view, and it is gone before either of the two lines that used to
cut it: its own edge, and the picture's far plane.

Each grid line is drawn in pieces, and each piece is as faint as the fade
makes it at the distance where it lies. The 'under' batch is drawn by the
overlay pipeline with alpha blending, so the colour's alpha reaches the
frame.

* The headless grid fades with the distance too (#4214)

The headless path (solidcraft-cli snapshot, the home-page thumbnail, the MCP
screenshot) drew the grid from the engine's palette, where a line had no
alpha: the grid still ended in a cut, and at a low camera angle the cut was
in the picture.

A SceneLine now carries an alpha, the CPU rasterizer blends with it and the
GPU capture passes it on, so the engine's grid can fade. The fade itself
moves to the engine, next to the grid's other geometry, and both paths use
it: the headless grid now reaches as far on the ground as the view is wide
(the ground stretches as it is seen at a slant) and dissolves into the
distance instead of ending in a line.

* Fix the headless/viewport grid fade divergence (#4214)

The engine stretched the grid's size with the slant of the plane it is seen at, the viewport stretched it only on the ground, so on a sketch's plane the picture's grid reached further than the window's (153.42 mm against 120.00 mm). Both now share one grid_ext, which the picture and the window draw the same grid from.

* The grid fades out before the picture's far plane cuts the ground (#4214)

The window's grid faded against a far plane of its own: the scene's radius
clipped by the projection's camera (260 mm away at 400 mm of distance), while
the picture itself cuts the ground at the far plane of its own projection
(223.7 mm at the same distance, because the projection frames the scene's
bounds and not its radius). The grid was still a third of its strength where
the picture cut the ground, so the cut showed as a straight line across the
view.

The fade now ends at the far plane the picture's projection uses, and the
grid is gone before that plane cuts the ground.

The test that watched the fade now measures the ink of each row of the
picture, and checks that the grid is already gone in the ten rows above the
row where the far plane cuts the ground: the point it compared before lay
beyond that plane, where both renders draw nothing at all, so the comparison
was always true.
2026-10-26 07:59:56 +00:00
Brandon Wees 08484af293 Finish the sketch when Extrude, Revolve or another feature starts (#2802) (#2815)
* fix(ui): finish the open sketch when a modeling feature starts

* fix(ui): wait for the marker roll before starting a feature from a sketch

* fix(ui): start the feature once the marker is back

* test(ui): keep the sketch open in the palette clearance test
2026-10-26 06:56:07 +00:00
raykholo c8314687fc Construction points and axes: Browser rows, and pickable in the view and dialogs (#4312) (#4320) 2026-10-26 04:50:46 +00:00
raykholo 878339cac8 Sketch patterns: count, spacing, and angle follow parameters (#5231) (#5332) 2026-10-26 04:31:55 +00:00
bherbruck 348bbc1dfa fix(joints): edge and corner picks follow the part when it changes (#6942)
The Joint dialog kept a round edge (a hole's rim), a straight edge and a
corner as plain points where they were picked. When the part got thicker,
a hole moved or the part got longer, the origin stayed where it was and
the jointed part overlapped the other one. An edit that left the picked
spot where it was (lengthening an arm away from the jointed hole) looked
fine, which hid it. Faces and hole walls were already found by name.

The dialog now sends a round edge as its circle's centre with its z, and a
straight edge or corner as an edge pick with its z. The engine keeps them
by name (the round end by its wall and the face across its rim, the edge
and corner by their edge and face names), with the frame the pick showed;
where it can't (no planar face beside the edge, no names), it keeps the
point as before. Edge origins get an optional axis (along the edge, or a
fixed direction) so a hinge on an edge keeps turning about it.

Tests: every joint type and as-built, for each way the dialog picks an
origin, with the arm made thicker, its hole moved and the arm lengthened,
inside one design and through Update Links.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 04:05:26 +00:00
dudedagger42 262f5c61c0 Move, Align and previews on placed components (#4455)
* Move and Align on placed components: picks and vectors where they are shown

A body in a component placed away from its own frame (an imported part
set upright) moved the wrong way: Move's vector, axis and pivot were
taken in the root's frame, so moving the upright plate up moved it along
its own frame's z. They now turn with the frame of the bodies moved.

Align mapped each pick into the frame of the body under it, so aligning
two separately placed parts mixed two frames (the plate landed at right
angles), and its snap points were never mapped at all. Align now finds
its picks, face normals and snaps where the view shows them and takes
both ends into the moved bodies' frame.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Preview: a feature's tool is drawn where its component is shown

Extrude, revolve and the primitives preview their tool on its own. That
preview was built in the model's frame, so on a component placed away
from it (an imported part set upright, edited with its component
active) the tool showed at right angles to the picked face, though the
feature itself came out right.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Follow main's lazy body frames and first-part grounding in the placed-component work

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-26 03:28:14 +00:00
Luke Jones ece2a8693a Cache assembly browser data between unchanged frames (#662) (#1610)
* Cache assembly browser data between unchanged frames

Extend #1762's cached component membership, placements and viewport hover
feedback with cached occurrence labels, folder entries, row keys and
tooltips. Skip offscreen row work and reuse browser hover buffers while
reading selection, visibility and locking live. Cache #2681's standard-part
configuration labels with the document snapshot instead of formatting
them on every redraw. Preserve #3009's live selection and hover marks
with highlight keys owned once by cached entries, and retain #2431's
feature rows in the reusable drawing order.

Related to:
- tangency-labs/solidcraft#662
- tangency-labs/solidcraft#1762
- tangency-labs/solidcraft#2681
- tangency-labs/solidcraft#3009
- tangency-labs/solidcraft#2431

Co-authored-by: Codex <noreply@openai.com>

* Browser cache: lock state moved to the session visibility

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Browser cache: reveal a placement's body by its row, and drop a needless borrow

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Codex <noreply@openai.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 02:51:32 +00:00
dudedagger42 0f77199449 Pipe: an Operation row, so a pipe can join, cut or intersect (#2820) (#5169)
* Pipe: an Operation row, so a pipe can join, cut or intersect (#2820)

The engine's solid.pipe takes an operation, but the Pipe window had no way to
choose one, so a pipe always made a new body. The window now has the same
Operation row as Loft and the primitives, and editing a pipe keeps its
operation.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Fit the Pipe operation row to main: sketch-qualified pick, length_input pattern

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-26 02:32:31 +00:00
raykholo ffbeb42b5c Assistant: say so when a turn ends without using SolidCraft's tools (#4846) (#5188)
* claim: #4846

* Assistant: say so when a turn ends without using SolidCraft's tools

When tools were offered and a completed turn made no tool call and no
change, the chat panel shows a short notice pointing to tool-capable
models: always for an empty reply, and for a text-only reply to an
explicit edit request. Plain answers to questions stay quiet. The
control channel exposes it as turnWarning.

* Fix the Anthropic loop test for the tools event; add ja and zh for the no-tool-call notice

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 02:19:57 +00:00
Matthew Knutson 816bcf10de Every new command comes with input and output schemas (#2829) (#4035)
* Every new command comes with input and output schemas

A test fails for a command without a contract or an output type, unless it is a planned!
placeholder or listed in schema/unconverted.txt, which holds the 400 commands that predate
the rule and only shrinks: the test also fails when a listed command has its schemas, when
the list names a command that doesn't exist, or when it isn't sorted.

`checked!` now takes only the command's id and checks the contract that id publishes
(`run_checked_as`), so the contract enforced is always the one described. Another test runs
every command that has a contract in strict with an unknown key, so a contract is never
published without `checked!`, under the command's own id, enforcing it.

A new book page, Command schemas, explains how to write a contract and a reply type, the
tests to add, the shared field types and how to add one, with a checklist; the failure
messages point to it. "Adding a command", CONTRIBUTING.md and AGENTS.md now include the
schemas, and the MCP tool description and docs/mcp.md no longer list the converted commands.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* List the commands added on main since: view.layout, view.history_layout, view.normal_to

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Command schemas guide: what participants and targets do, checking the evaluation, warning-free replies

- `participants` changes the result for some features and nothing for others; where it and
  another key override each other, or where it has no effect, say so in that key's
  description or in the summary.
- The example primitive's `targets` default to every body in the feature's component, not the
  bodies it meets; they're ignored when `participants` lists bodies.
- Check what each value does where the feature is evaluated, not only how the handler reads it.
- A reply test runs every form in Warn and checks for no `param_warnings` (Strict for a reply
  that isn't an object).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* List the 43 commands added on main since: frame, component, render and others

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* List the 11 commands added on main since: browser folding, standard views, parameter sweep, path flange

browser.collapse_all, browser.expand_all, inspect.parameter_sweep, sheet.path_flange and the
seven view.* standard views (back, bottom, front, isometric, left, right, top) landed on main
without schemas; the gate flags them, as intended. 457 commands listed.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Schema rule warns instead of failing for now

A command without input and output schemas prints a warning listing it
(test output and a CI annotation). SCHEMA_RULE_STRICT in coverage_tests.rs
(or SOLIDCRAFT_SCHEMA_RULE_STRICT=1) makes it fail again. Docs say "should,
and will become required".

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-26 01:43:02 +00:00
Nathan Dane 28689e784e fix(ui): retain macOS application bar controls alongside native menus (#6190) 2026-10-25 21:19:57 -04:00
taylorhayis ff2ca2d462 Keep focus when correcting an invalid parameter name (#3965) (#4000)
* claim: #3965

* Parameters: a click can correct an invalid name (#3965)

Refusing the new row was putting focus back on the field being left, so the correction was typed into the expression.

* Parameters: the invalid-name test types its expression draft (#3965)

A new row starts with a blank expression, so the regression test types 10 mm and checks that correcting the name leaves that draft in place.
2026-10-25 22:42:30 +00:00
CamWight ab80a410a1 Viewport theme: a light 3D view in a dark window, and the reverse (#4146) (#4147)
* claim: #4146

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Viewport theme: a light 3D view in a dark window, and the reverse (#4146)

Preferences › Interface › Theme gets a Viewport row under the theme tiles:
Follow theme (the default, as before), Light or Dark. Light or Dark draws
the 3D view in the built-in Light or Dark theme's colours whatever the
window uses, so a dark window can show the model on a light view and the
other way round; it works with every theme, theme files included.

The view takes the background and grid, bodies, selection and hover, the
origin, previews, sketches with their dimensions and glyphs, the navigation
cube and triads, box selection and the analysis colours. Panels, dialogs,
menus and the chips over the view keep the window's. Text and warnings drawn
straight onto the view (the sketch status line, the loose-end and midpoint
markers, the section's cut outlines, the 3D sketch tool and the sketch tools'
previews) take the view's side, so they read on its background.

theme::ViewportTheme is the setting (saved as `viewport_theme`: theme, light
or dark; an unknown saved value reads as Follow theme, as ColorVision's
does). Tokens::get() takes the view's colours from the other side only when
the view's dark or light differs from the window's; Tokens::view() is the
view's side for colours drawn onto it. The ground shadow follows the view
(the scene and highlight caches already key on the colours themselves),
ui.render draws in the view's colours, and ui.prefs takes `viewport_theme`
and reports `viewport_dark`. An older release ignores the setting and draws
everything in the theme.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Viewport theme: follow the single set of axis colours

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-25 22:17:04 +00:00
leValdemar19 b94692497e Sketch Dimension: arc length from an arc and its end point (#754) (#4245)
* claim: #754

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

* Sketch Dimension: arc length from an arc and its end point (#754)

The arc-length dimension existed (sketch.dimension type arc_length) but
the Dimension tool could only give an arc its radius. An arc and one of
its own end points, in either order, now dimension the arc's length:
click the arc, then its end. The pair was refused before ("cannot
dimension that combination"), so no existing result changes. A point
where the arc's end is (a coincident line end) counts as that end.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 22:17:01 +00:00
Armin 7bcc1ee0eb Drawing: shared number formatter (#5290) (#5315)
* claim: #5290

* doc: add configurable decimal number formatter (#5290)

---------

Co-authored-by: Armin <192400139+armin0411@users.noreply.github.com>
2026-10-25 22:11:39 +00:00
raykholo 36a60a70d9 Graphics: 1x anti-aliasing where the multisampled view draws nothing (#5819, #5870) (#5832) 2026-10-25 22:10:04 +00:00
dudedagger42 5d17fa970b Sketch: hovering a circle's edge wakes its centre (#5043)
* Sketch: hovering a circle's edge wakes its centre

A circle's or arc's centre was hard to take with Line or Dimension: it is a small
point in the middle of empty space, taken only within 8 points of the pointer, and
nothing showed where it was. Hovering a circle or arc of the sketch being edited
now wakes its centre: drawn (a cross in a ring) and taken from 16 points away, so
the pointer can go from the edge across the inside to it. Hovering another curve
or point puts it back to sleep, as does leaving the sketch.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* A woken centre's extra reach yields to a curve under the pointer

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-25 21:57:23 +00:00
Frank b5bab3f663 Browser: surface bodies get the surface icon in the Bodies folder (#4165) (#4168)
* Browser: surface bodies get the surface icon in the Bodies folder (#4165)

Every row in the Bodies folder had the solid body icon, so a surface (an
open shell, such as a Surface Revolve of an open curve) looked like a
solid. A body whose shell does not close now shows the existing surface
icon; solids keep the body icon.

Body::is_surface walks every shell's edges, so ModelBody caches it once per
body (shared by clones, like outline_bounds) instead of the browser
checking it every frame.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Add the surface icon to the requested-icons manifest

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-25 21:51:02 +00:00
Steven Huff ccea34e73c sketch: a tangent whose contact is tied by Coincident, PointOnCurve or Midpoint is solved at the contact (#2584)
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-25 21:37:51 +00:00
Dennis Klappe c7f86c7309 Look At in the viewport context menu for a planar face or plane (#4105) (#4497)
* Look At in the viewport context menu for a planar face or plane

Fixes #4105

* Look At tests: turn the camera without the animation

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 21:37:37 +00:00
raykholo 4355d117ef Assistant: warn when an Ollama model has no tool support (#4846) (#4916)
* claim: #4846

* Warn when Ollama models lack tool support (#4846)

Check Ollama model capabilities in the background and cache results per
endpoint and model. Show an advisory warning for models without tools,
expose it through ui.agent_chat, and document the behavior.

Cover capability parsing, warning selection, background probing, caching,
and selection changes with synthetic regression tests.

* Keep the Ollama capability probe out of the web build

The panel never calls it there, so it would only be dead code.

* Wrap the model warning instead of cutting it off

In a narrow panel the end of the sentence, the part that says what to do, was truncated.

* Fix AgentConfig default after rebase onto main

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Move the Ollama no-tools warning into a pending locale file with ja and zh

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 21:37:30 +00:00
dudedagger42 39951a22ff Loft: a sketch point picked in the window is an apex (#4830) (#5207)
solid.loft already closes to a point (a section {sketch, point}), but the Loft
window's Profiles input took profiles only, so a pyramid or cone tip couldn't
be made from the UI. The input now also takes a finished sketch's point, sent
as an apex section in pick order; profiles of one sketch still make one
section.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 21:17:14 +00:00
ChrisNo a3890b3bd5 Open a linked part from its assembly Browser row (#2348) (#2349)
* claim: #2348

* Open linked designs from assembly browser

* claim: #2348

* Test linked design action with multiple components selected

* Fix linked design lookup in browser storage and translate its menu action

* Add Turn Up Axis to complete UI catalogs

* Keep browser DXF download after linked-design checks
2026-10-25 21:15:48 +00:00
Vadim Kalinsky 59cad5f0bb Colored components (feature request #2507) (#2877)
* feat: add colored components inspection toggle

* feat: persist component colors and add cycling controls

* feat: assign component colors in creation order

* fix: update component color menu integration and translations

* fix: proper description for pending format change.

* fix: deleted duplicated format change description from docs/pending.

* Compare the component colour counter in the features-only check

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Vadim Kalinsky <vadim@kalinsky.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 21:11:03 +00:00
Kai Evans 5fbe058051 Sketch: a click picks the sketch's own curve over a projected one under it (#5257) (#5260)
* Sketch: a click picks the sketch's own curve over a projected one under it

* Select Other tests: follow origin visibility rename

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Own-curve pick test: click away from the lines' midpoints, which are picks of their own now

* Use the select-other test helpers main already has

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 21:10:10 +00:00
DuBearte 0752d8d79c Extrude: a profile drawn twice is cut once, not as two coincident tools (#5543) (#5789)
* claim: #5543

* Extrude: a profile drawn twice is cut once, not as two coincident tools (#5543)

A circle drawn twice at one place is two profiles of one region. Extruded
together they were two coincident tools: a cut through a 121-hole grid with
four such circles retried the boolean with the tool nudged (four times) and
took 25 s instead of 0.5 s.

merge_regions, which every extrude, revolve and surface feature runs on the
regions it builds from, now leaves out a region whose boundary repeats an
earlier one (within 1e-7 of its size; corners and segment middles on the
other loop both ways, holes alike). The selection itself keeps its
multiplicities, as profile_refs' tests require.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 21:10:02 +00:00
raykholo 0344a41dc4 Open and insert a DXF outside a sketch (#2052) (#4635) 2026-10-25 21:03:31 +00:00
DuBearte dba8108369 Timeline: a reorder evaluates the design once, from the cache it already has (#6186) (#6187)
* claim: #6186

* Timeline: a reorder evaluates the design once, from the cache it already has (#6186)

timeline.reorder checked the move on a copy of the model, then dropped it,
so setting the reordered design evaluated the moved part of the timeline
again; reorder_many (and moving features into a group) checked on an empty
model, recomputing the whole design even for a move near the end. The
check now starts from the session's own model, and the session keeps the
model it was checked on.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Marker is Copy: drop the clone

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-25 20:55:52 +00:00
bherbruck 8e61eb7d6f Release 0.23.0: version bump, design format 37 (#6868)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 18:18:36 -04:00
James Barnette 2eaa15ea04 Context menu: a right-click on a face of a selected body keeps the selection (#5849) (#5915)
* claim: #5849

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G1b41qKhyhmZoiAFYt9YwX

* Context menu: a right-click on a face of a selected body keeps the selection (#5849)

A right-click selects what is under the cursor first, so the menu is about it. The check
for "already selected" compared the pick with each selected item by identity, so a face
of a selected body never matched: right-clicking a face of a selected body replaced the
whole selection with that one face, and the face menu opened instead of the body menu.

A face, edge or vertex of a selected body now counts as part of the selection, whether the
body is selected on its own or through an occurrence. The right-click then leaves the
selection alone, as it already did for a face in a multi-selection of faces (#3733).

selection::same_item is unchanged: dialogs and Select Other compare picks with it, and
there a face of a selected body is a different pick.

Fixes #5849.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G1b41qKhyhmZoiAFYt9YwX

* Pass the held keys in the selected-body context menu test

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-25 20:41:52 +00:00
dudedagger42 f512d4a004 Move: placements of one part moved together each go the way asked (#4768) (#4849)
* Move: placements of one part moved together each go the way asked (#4768)

A part placed more than once (an imported assembly's corners, screws or
fan blades) is one body in its component. Moving several of its
placements together moved that body once per placement listed, each
placement turning the move its own way, so the copies flew apart.

When solid.move names one part through two or more placements, it now
moves those placements in the world, as occurrence.move does with space
world: a placement held by a rigid group (an imported assembly) moves with
the outermost placement holding it, one inside another being moved isn't
moved again, and root-component bodies listed are moved as bodies, all in
one undo step. Other moves are unchanged, and so is a move with copy.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Free the grounded first part before the placement-move tests move it

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-25 20:28:06 +00:00
NOWN-DEV 826244bb28 Text parameters: a sketch text's words built from them follow every change (#727) (#6364)
* Test: a text's words follow its text parameters, and so does its cut

A sketch text whose words are an expression of text parameters (`Label + '-L'`): a parameter edit
and a configuration row that sets the parameter relabel the text, the text's cut follows, and the
expression is saved with the design.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

* Text parameters: a sketch text's words built from them follow every change

A design's parameters are numbers; a text's words (a part label, a size code) could only be typed.
Text parameters hold words: `parameters.add` or `parameters.change` with `unit: "text"` (the
expression is the text, quotes optional), and `sketch.text` and `sketch.edit_text` take
`text_expression` (quoted texts and text parameters joined by `+`, `Label + '-L'`) instead of
`text`. The text is laid out anew from its expression on every evaluation, so a parameter edit,
a configuration row or a script relabels it and the features built on it (a cut, an emboss)
follow in the same rebuild. The design file keeps the text parameters and each text's expression
(one pending format change); a configuration table's parameter column can be a text parameter;
the Parameters dialog lists them under the unit `text`.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

* Text parameters: the joints' same-but-features check compares the text parameters

The joints are solved once per change unless the design differs only in its features
(same_but_features, #6372), which names every Document field. The text parameters are a
field of their own and change what a text's words evaluate to, so two designs that differ
in them are not the same but for their features.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 20:24:23 +00:00
NOWN-DEV 111dbc6855 Render: the radiance bound check uses a range, as clippy 1.97 asks (#6650)
`cargo clippy --workspace --all-targets -- -D warnings` fails on Rust 1.97: the
reflection radiance bound in crates/render/src/raytrace/image.rs (#5494) trips
`clippy::manual_range_contains` (`v < 0.0 || v > 1e12`).

It now reads `!(0.0..=1e12).contains(&v)`. The two differ only for NaN, which the
`is_finite` check in front of it already refuses, so nothing else changes.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 20:23:04 +00:00
dudedagger42 ab7602fd0e Project: don't lay a second copy over geometry the sketch already shows (#4929)
* Project: don't lay a second copy over geometry the sketch already shows

A sketch on a face already holds the face's border, linked. Projecting that face
again, or one of the border's edges, added a second set of curves and points over
the first: on a rounded corner that shows as extra points and lines. Project now
skips a reference whose curves are all linked into the sketch already (lines,
circles, arcs), reports it as `already_projected`, and refuses a pick of nothing
new so it adds no undo step. Points on their own (the origin, a vertex) still
project.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Projecting the face a sketch already shows adds no second copy in the face scenario

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-25 20:13:46 +00:00
HiroKenEz b1d4293cf0 One set of X, Y and Z colours for the origin axes, view triad and Move gizmo (#976) (#4430)
* claim: #976

* One set of X, Y and Z colours for every axis (#976)

The origin axes, the navigation cube's triad, 3D sketch triads and joint
origins drew `axis_x/y/z` (255,0,0 / 0,255,0 / 2,2,248), the view triad and
the headless picture drew `triad` (220,60,60 / 60,170,60 / 60,100,230) and
the Move gizmo drew `gizmo` (225,70,60 / 80,190,80 / 70,130,240). The
`triad` and `gizmo` tokens are gone: every axis reads `axis_x/y/z`, now the
view triad's values (the engine's `view::colors::AXIS_*`, so headless
pictures are unchanged, and the set the red-green table was measured for).
Older theme files' `triad` and `gizmo` lists still read and set the axes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 19:59:36 +00:00
Homero Thompson 99d5b43024 Doc: the names of split faces no longer grow with every split (#5860) (#6045)
* claim: #5860

* Doc: stop the names of split faces from growing with every split

* Joints: the long-piece-name test takes the longest name a piece now gets

Split-face names are bounded at 512 bytes since #5860, so the test cannot
build one over 512; it takes the longest the history gives.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 19:58:56 +00:00
raykholo f937905cf3 A sketch point on the origin can be dragged (#4719) (#4837) 2026-10-25 19:37:01 +00:00
raykholo 46f7d4d8dc Preferences: the web app's Updates section says how it updates (#5496) (#5500) 2026-10-25 19:29:04 +00:00
raykholo d17b70241f Command dialogs keep the value field focused after a viewport click (#4643) (#4652)
CI / Dependency advisories (push) Has been cancelled
CI / Select checks (push) Has been cancelled
CI / Format and repository checks (push) Has been cancelled
CI / Quick compile (push) Has been cancelled
CI / Native Linux Clippy (push) Has been cancelled
CI / Build tests (push) Has been cancelled
CI / Native Linux tests (push) Has been cancelled
CI / Action matrix (1/16) (push) Has been cancelled
CI / Action matrix (10/16) (push) Has been cancelled
CI / Action matrix (11/16) (push) Has been cancelled
CI / Action matrix (12/16) (push) Has been cancelled
CI / Action matrix (13/16) (push) Has been cancelled
CI / Action matrix (14/16) (push) Has been cancelled
CI / Action matrix (15/16) (push) Has been cancelled
CI / Action matrix (16/16) (push) Has been cancelled
CI / Action matrix (2/16) (push) Has been cancelled
CI / Action matrix (3/16) (push) Has been cancelled
CI / Action matrix (4/16) (push) Has been cancelled
CI / Action matrix (5/16) (push) Has been cancelled
CI / Action matrix (6/16) (push) Has been cancelled
CI / Action matrix (7/16) (push) Has been cancelled
CI / Action matrix (8/16) (push) Has been cancelled
CI / Action matrix (9/16) (push) Has been cancelled
CI / Action matrix determinism (push) Has been cancelled
CI / Property tests (many cases) (push) Has been cancelled
CI / Doc tests (push) Has been cancelled
CI / Reference tests (push) Has been cancelled
CI / Windows D3D12 FXC shaders (push) Has been cancelled
CI / Windows app startup (push) Has been cancelled
CI / ci (push) Has been cancelled
CI / Compile WebAssembly (manual) (push) Has been cancelled
CI / Compile RISC-V (manual) (push) Has been cancelled
Docker / image (push) Has been cancelled
Pages / build (push) Has been cancelled
Pages / deploy (push) Has been cancelled
Generated files / Regenerate and commit (push) Has been cancelled
Packaging lint / lint (push) Has been cancelled
Lists / Design format changes merge cleanly (push) Has been cancelled
Lists / Lists are sorted one item per line (push) Has been cancelled
2026-10-25 19:13:51 +00:00
raykholo fbe778a1e8 Rigid Group counts picked instances and explains bodies in one component (#4790) (#4792) 2026-10-25 19:13:48 +00:00
momysnow 0252f0bf30 Render preview: test that it never paints the last Design frame (#5119) (#5120)
#5187 fixed the frozen Render preview: product frames now set ss_ready
themselves instead of keeping the flag from the last Design frame, so
paint() no longer blits that stale offscreen picture. Nothing tested it.

The new test draws a see-through Design frame (offscreen, for
order-independent transparency) and then an opaque product frame on the
same renderer, and checks the middle pixel shows the product. With the
product branch's ss_ready update removed it fails with the stale red
Design colour, [255, 129, 129, 255].

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 19:12:50 +00:00
dudedagger42 0c0c4db612 Home: a theme's File view follows its own colours where it sets none (#4868) (#4924)
* Home: a theme's File view follows its own colours where it sets none (#4868)

and no built-in theme sets them, so every theme kept Dark's or Light's blue rail and grey cards
under its own app bar and headings. A theme that leaves them unset now gets them from its own
palette: page and cards from its panel and dialog, the rail from its accent deepened as Dark's
and Light's are, the primary action from its soft accent, and each ink the one of its own colours
that reads best there. Dark and Light themselves are unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Leave a theme that sets no colours as its base palette

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-25 19:05:48 +00:00
Taha Zarif 3e6c039985 Fix/recovery metadata bounds (#5578)
* test: cover malformed and unbounded recovery metadata

Add regression tests for oversized JSON, mismatched entry IDs, and
non-regular recovery metadata. These expose failures in the baseline
recovery reader before the implementation fix.

Signed-off-by: Taha Zarif <tahazarif380@gmail.com>

* fix: bound recovery metadata reads and validate entry identity

Reject oversized and non-regular recovery metadata before reading it,
and bound the read if a file grows after inspection. Require each JSON
entry ID to match its filename for orphan listing and recovery loading,
preventing unrelated save paths from being attached to a recovered design.

Signed-off-by: Taha Zarif <tahazarif380@gmail.com>

* Format recovery.rs

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Signed-off-by: Taha Zarif <tahazarif380@gmail.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 18:49:55 +00:00
Carlos Keese 7734ba2300 Offset Face: split a periodic face off its seam first, as booleans already do (#6226) (#6227)
* claim: #6226

* Offset Face: split a face off its seam and try again, as booleans do (#6226)

A hole's wall arrives from a STEP file as one whole turn bounded by one wire that
runs along its seam twice, where SolidCraft builds the same wall as two halves.
Offset Face heals the body before it moves anything, and healing such a face
fails inside truck with `This wire is not simple`, so the panic guard turned the
whole operation into a kernel internal error. Since importing is how a part with
a hole usually arrives, Offset Face did not work on imported parts with holes at
all.

`seam_faces` already answers this for booleans: split every such face in two
along a plane through its axis, run the operation, and compose the history back
over the body as it was given. This gives the offset path the same retry.

- `seam_faces::one_body` is `boolean`'s answer for an operation that takes one
  body, with `needed_one` beside `needed`.
- `offset_faces` now does its healing, its face picking and its offset inside one
  closure, so the retry runs the whole of it on the split body; the first attempt
  is guarded, so the failure is an error the retry can act on rather than an
  unwind. The faces are picked per body, because the pieces are numbered
  differently once a face is split — the points do not move, so they pick the
  same surface either way.

The regression test is in `seam_faces_tests.rs`, beside the boolean ones: a
20 x 20 x 10 block with a 6 mm hole, read back from STEP, whose top moves 2 mm
and lands on the same volume as moving the built body's top, with its history
intact.

Checked against `main` before and after: the three kernel tests that fail here
(`blend::…seam_twice`, `step_in::…parallel_body_preparation`,
`tests::a_box_cut_round_a_small_hole…`) fail the same way without this change.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: CarlosKeese <dudukeese@gmail.com>
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-10-25 18:49:44 +00:00
Vetle Marentius Nilsen 0e916ee598 Add Norwegian Bokmål interface translation (#4544) (#4556)
* claim: #4544

* Add Norwegian Bokmål translation

* Refresh Norwegian Bokmål translations against current main

* Drop Norwegian messages whose ids are no longer in the English catalogue

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 18:49:00 +00:00
raykholo 87c9a37663 Cut and Intersect say which component holds the body they missed (#4639) (#4641) 2026-10-25 18:42:50 +00:00
dudedagger42 10124c8ccf Redefine Sketch Plane names the plane a sketch is on now (#5103) (#5545)
* claim: #5103

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Redefine Sketch Plane names the plane a sketch is on now (#5103)

For a sketch with no body-face attachment the panel only said so. It now shows
a Current plane row: the origin plane, a construction plane's name, or the
plane it is offset from, turned from or flipped from. English, Japanese and
Chinese messages added.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drop needless to_string calls in the plane name format

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-25 18:42:24 +00:00
Kai Evans 0870d6474a Themes: Okibi (dark) and Akari (light), from the Okibi design system (#5730) (#5731)
* Themes: Okibi (dark) and Akari (light), from the Okibi design system

Two built-in themes mapped from the Okibi design system v1.8
(https://kaievns.github.io/okibi-akiri-design-system-spec/): cool charcoal
ash with a single ember accent, and its warm-paper light twin. Every one of
the 156 colours is set, so nothing falls back to the Dark or Light palette.

* Give the Okibi and Akari themes an icon palette

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 18:42:19 +00:00
JK3D e9b9c8f697 Joints: apply a joint solve through indexes instead of searches (#6392) (#6393)
* claim: #6392

* perf: apply a joint solve with indexed joints and occurrences

Every change to a design re-solves its joints and applies the solution. Applying it searched
the joints for each value and, for each occurrence the solve places, searched the occurrences
for it and walked its parents' first occurrences by searching again.

Joints and occurrences are now indexed once, keeping the first of each id as the searches
found it, and the parents' transform is read through the index as the loop leaves it
(component_transform shares the walk, transform_through).

Synthetic design, headless (2000 components at the root with one component inside each, 4000
joints, a solution placing every occurrence): apply 14.1 -> 2.2 ms (median of 12).

The new test applies a solution that moves a component and the components inside it, and
checks each lands where the solution put it, read through its parent as the loop has just
moved it.
2026-10-25 18:42:10 +00:00