b201c283c7cb8d29633475dca660b73ec884418b
2137 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
b201c283c7 |
Model-cache tests trust an unknown source commit, so they pass without git (#4221)
Fixes #4045 |
||
|
|
a2ae3ffbe0 |
Sketch drag: keep the far end of a tangent line still (#4925)
Dragging one end of a line tangent to a circle or arc let the solver move the
line's other end too, sometimes far ("goes flying"): only the dragged point was
held, and the least-squares step spread the change over the free points. The
drag now first tries holding the line's far end as well, and falls back to the
old solve only when that can't be met. Dragging the end of a tangent line to
(5, 12) moved its other end 0.399 mm on 0.19.0; it now stays put.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
|
96661111f9 |
OBJ export shares vertices and keeps body names as written (#4462)
Fixes #4451 |
||
|
|
2a0096fe4a |
Release 0.22.0 (#6344)
* Release 0.22.0: version bump, design format 35 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Release 0.22.0: tests no longer expect the folded render and material changes to be pending Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
cc9d76cd86 |
Tapered cut: run on less, then start on the face, when the run on closes a small corner (#4825) (#4858)
A cut starting on a face of its target runs its tool on behind the start plane with the tool's slope. A taper that widens the pocket narrows the tool there, and a corner arc smaller than the run on times tan(taper) closed: "the taper closes the profile", though the pocket itself only grows. The run on is halved, quartered, then dropped (the tool starts on the face with its straight foot) until the tool builds. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
c61ffb54a8 |
Insert Part: M2, M2.5, M14, M24 and M30 screws, bolts, nuts and washers (#2091) (#5194)
The fastener tables stopped at M3 and M20. The socket head cap screw (ISO 4762), hex bolt (ISO 4014), hex nut (ISO 4032) and plain washer (ISO 7089) tables, and the coarse pitches they use, now have M2, M2.5, M14, M24 and M30 too, in size order. Set screws and dowel pins are unchanged. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
ab889a8fff |
History: the sketch at the marker is shown while it's the current step (#5202) (#5204)
* claim: #5202 * History: show the sketch at the marker while it's the current step (#5202) A sketch a later feature uses is hidden, so moving the History marker onto it changed nothing in the view. The sketch immediately before the marker is now drawn even when consumed or hidden; its stored visibility is untouched, and earlier sketches, hidden components, groups and the Sketches folder still apply. |
||
|
|
fcc3753a4c |
Canvas: a plane seen edge-on doesn't take the image (#4717) (#4876)
* claim: #4717 * Canvas: a plane seen edge-on doesn't take the image (#4717) Placed with a click at a sketch's origin, the canvas went onto the origin's XZ square, which is under the cursor there too and was the first plane hit. From the Top view that plane is edge-on, so the image was out of sight and Canvas seemed to do nothing. A plane hit counts only when the view shows it (its normal more than ~11.5 degrees off the view's edge-on direction); the sketch plane, or another plane, takes the image instead. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
2c9d0a2847 | Sketch palette: Finish Sketch sits inside the footer's inset, label centred (#5387) | ||
|
|
99fd05afeb |
Sketch Dimension: click an existing dimension to edit it while the tool is on (#5451)
With Sketch Dimension on and nothing picked yet, a click on a dimension that is already in the sketch opens its value box, the same in-place editor a double-click opens without a tool. Enter applies, Esc cancels, and the tool stays on for the next dimension. The dimension's text always takes the click; its lines only away from sketch points and curves, which still start a new dimension (the rule plain selection uses). Once a new dimension is under way, clicks keep their meaning. Dimensions off in the selection filter are left alone. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
a8051760f7 |
Create Sketch in the right-click menu (#3032) (#3033)
* claim: #3032 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Create Sketch leads the right-click menu on empty space too (#3032) A right-click on empty space in the viewport now starts with Create Sketch, in the same place as a right-click on a plane (#1354): first, then a separator. Over a plane it sketches on that plane, as before; on empty space it is the toolbar's Create Sketch, so the next click on a plane or planar face starts the sketch there. The menu offers it once. Tests: empty_space_leads_with_create_sketch (the list) and create_sketch_from_empty_space_sketches_on_the_plane_clicked_next (the harness: right-click empty space, pick it, click XY). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
c795a3f581 | Regenerate THIRD-PARTY-LICENSES.txt and docs/features.md [skip ci] | ||
|
|
2cab9dc142 | Measure: copy button next to the Distance value (#4442) | ||
|
|
6d8d53aac8 | Browser tree: double-click a row to rename it (#4460) | ||
|
|
4e6939b5cf |
Extend: extend a free arc in place and add the line the preview draws (#4615) (#4618)
* Slightly fix the extend tool * Extend: add the line the preview draws, and stop an arc on another curve sketch.extend reported "nothing to extend to" whenever nothing stood in the line's way, even though the viewport previewed a line past its end; with nothing in the way the extension now runs as far as the preview shows, on the same measurement, so the click adds what was drawn. An arc extension that ran into another circle or arc refused the target when its crossing already belonged to another curve's end (a shared crossing point of two circles): that point is now joined instead, so the extension closes onto the geometry that is there. --------- Co-authored-by: SolidCraft Dev <dev@solidcraft.local> Co-authored-by: n0tfr3shm1lk <n0tfr3shm1lk@ukr.net> |
||
|
|
f6ff2ff139 |
Sketch palette: the Tie button shows "Tie", not its catalog key (#4854) (#4857)
* claim: #4854 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Sketch palette: the Tie button shows "Tie", not its catalog key (#4854) The button passed the key itself to ui_kit::button with Button::Normal, which draws its label as given; it now passes the translated label. The loose-ends test checks the button by its label. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
048c1ae8a8 |
Move preview: draw the moved bodies' own triangles, without evaluating the move (#4912)
A move changes no shape, but its preview copied the session, evaluated the move and meshed the bodies again for every change of the values. While the triad was dragged the part trailed the arrow by one of those evaluations, and longer for a larger part. The preview now takes the listed bodies' world meshes once and draws them moved by the move's transform (about the world origin, as the Move feature turns bodies), the original shown as removed and hidden as replaced; a copy keeps the original. Anything it can't take (values that don't evaluate, a body not shown, over 2 M triangles) goes to the scratch-design preview as before. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
b00a1e87f4 |
Insert SVG: refuse geometry scaled to infinity, and bound the profile grid (#5020) (#5025)
* claim: #5020 * Insert SVG: refuse geometry scaled to infinity, and bound the profile grid (#5020) A transform such as scale(1e308) turned a circle's radius into infinity. The SVG reader now refuses non-finite transforms and geometry with a clear error, and Grid::cells in the profile finder uses checked arithmetic, so an infinite or huge box is checked against all shapes instead of wrapping the cell count and allocating until memory runs out. * Insert SVG: refuse lines with infinite ends; fix the grid test's cell count A line whose transformed ends are infinite was dropped silently, because the distance between them is NaN. It is now refused as out of range, like curves. The new grid test expected one cell for a box spanning its own one-box grid; such a box touches the 2 x 2 cells at its corners, so it expects 4. |
||
|
|
8cbde001ef |
Front … Isometric View commands, Ctrl+1…7 by default (#5057) (#5058)
* Ctrl+1…7 turn the view to the standard views (#5057) Front, back, left, right, top, bottom and isometric, handled with the other view keys beside Ctrl+8: animated like the view cube, reserved so no command can take them, and ignored on the flat pattern page. * Front … Isometric View are commands, Ctrl+1…7 their default keys (#5057) The standard views become seven commands (view.front, view.back, view.left, view.right, view.top, view.bottom, view.isometric) whose default shortcuts are Ctrl+1…7, instead of keys the window handles itself. They show in Keyboard Shortcuts, can be moved to other keys or cleared, and the digits can be given to other commands. In the app they turn the view as the view cube does; headless they set the session camera, keeping target, distance and projection. |
||
|
|
ad8b2f91bb |
File: a saved model whose booleans retried is taken on opening (#5286) (#5334)
A design file keeps its evaluated model so that it opens without
evaluating the timeline. A feature whose boolean needed a retry records
it, and the kernel's BooleanDiagnostics leaves `rejected` out when it is
empty but has no default for it when read, so reading those records
failed ("saved model: diagnostics"), the saved model was refused, and
the design was evaluated on every open (17.6 s for the reporter's
17-feature design, 1.2 ms with this).
The reading side now takes an absent list as an empty one, without a
change to the kernel crate.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
|
9919825ea3 |
Expand All and Collapse All in the Browser (#5190) (#5335)
Open or close every Browser folder from the design or a component menu, including folders that start closed. Display only: not saved, not an undo step. |
||
|
|
97e0ff9050 |
Sketch: a face seen edge-on projects as one line end to end (#5375)
A face orthogonal to the sketch plane projected every edge onto the same
line: coincident and overlapping pieces, one per notch, that the face
boundary check then refused on the next evaluation ("boundaries cross,
touch or have ambiguous topology") and marked lost.
A link layout whose straight pieces all fall on one line is now one line
between its two farthest points; vertices along it can be projected one
by one. The face-boundary and loop-identity checks skip such a silhouette,
which encloses nothing. Coincident lines are laid out once.
|
||
|
|
c48c1a09d3 | fix(skills): quote editing description for valid YAML (#4389) | ||
|
|
ee3d41210d |
Orbit about the cursor: over empty space, turn about the part in view (#2616) (#4947)
* Orbit about the cursor: over empty space, turn about the part in view (#2616) With Orbit around → Point under the cursor, an orbit begun over empty space turned about the middle of everything shown. For a part far from the origin and anything at the origin (a small body, a sketch), that middle is halfway between, far off screen, and the part flew out of view: a box at (50000, 50000, 0) with a 10 mm box at the origin went from (872, 535) on screen to (-277084, -279746) after a 180 px orbit. It now turns about the middle of the bodies the view shows part of, and only falls back to everything shown when no body is in view. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Restore LF line endings in the files this change edits Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
be685d064f |
Add a contribution skill for first-time contributors (#5851) (#5852)
* claim: #5851 * Add a contribution skill for first-time contributors (#5851) skills/solidcraft-contributing walks a new contributor from checking their tools through fork setup, choosing and claiming an issue, a focused change with checks and screenshots, and review. The skills index lists it and the install commands point at tangency-labs/solidcraft. * Skills install: copy the modelling skills only The contributing skill is read from its link when someone wants to contribute, so the install commands no longer put it in every project's global skills folder. |
||
|
|
32e613aa8c |
Home: test that a sample's picture arriving while it builds is not a failed build (#4351)
#4349 fixed the start page treating a sample's shipped picture, which comes back under the sample's key without a design, as its build failing. That race dropped the request with "the sample could not be built" and made the s15_start_page_sample_save_reopen scenario fail depending on timing. This adds the test that sends the picture while the sample is wanted and checks that the sample still opens. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
58a9d33f02 |
Right-click menus stay open when the opening click's press and release share a frame (#2458) (#2460)
A menu ignores presses until it has been on screen for a frame, so the press of the click that opened it can't close it again. Fixes #2458. |
||
|
|
a8e6154c0d |
Pattern of features: show the direction arrow on the patterned feature (#3034) (#3909)
* claim: #3034 * Pattern of features: show the direction arrow on the patterned feature (#3034) A rectangular pattern whose Object Type is Features had no drag arrow and no value box: the canvas anchor knew bodies, faces, edges and sketch geometry but not a whole feature, so it returned nothing. A picked feature now anchors at the middle of the geometry it made (its bodies, or its faces on a body later features changed). The pattern's preview stands in for the body the feature lies on, so the anchor reads the feature's geometry including replaced bodies, as a body pick reads its body. |
||
|
|
d61dff69a6 |
Exploded views export as an animation (#3713) (#3744)
* claim: #3713 * Exploded views export as an animation (#3713) motion.export_animation takes an exploded view (view: id|name) as well as a study or a joint: the parts come apart at a steady pace from the assembled placement to where the view shows them, and back together with back: true (exploded at the middle frame). 41 frames by default, 81 with back. The home view frames the parts both assembled and exploded. As with explode.show, the design keeps its placements, its history and its saved state. explode.show and the export share the moves; moves a design file gives with no finite translation are left out. * Mechanisms skill: an exploded view's default frame count --------- Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com> |
||
|
|
8c853fff3e |
Press Pull: route curved faces to Offset Face (#2873) (#3463)
* claim: #2873 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Press Pull: route curved faces to Offset Face, with an arrow (#2873) Q sent every non-edge selection to Extrude, which takes only profiles and planar faces, so a hole's wall or a boss's side was refused. The engine's solid.press_pull already offsets curved faces; the window now does too: - Q on a curved face opens Offset Face; its Faces input takes curved faces. - Q with nothing selected opens Extrude as before, and a first pick of a curved face or an edge reopens Press Pull on it (Offset Face or Fillet). - Offset Face's arrow follows a curved face's outward normal where it was picked, so it can be dragged like an extrude's. Fixes #2873 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
daec1091f4 |
Keyboard Shortcuts: a bound Shift key is named "Shift", not "Shift+ShiftLeft" (#4582) (#4657)
* claim: #4582 * Keyboard Shortcuts: a bound Shift key is named "Shift", not "Shift+ShiftLeft" (#4582) The shortcut's name was the modifiers held plus the key itself, so binding the Shift key alone showed "Shift+ShiftLeft": the modifier named twice, and the left and right keys as two different shortcuts. A modifier key is now the shortcut itself, and its two sides are the same one (the app's modifiers collapse them), so the page shows what the user pressed. A shortcut bound before the change ("Shift+ShiftLeft") keeps working: the stored name is migrated when the preferences or a shortcuts file are read. * Keymap: the bound-modifier test passes the new repeat flag to press Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> --------- Co-authored-by: bherbruck <brennen.herbruck@gmail.com> Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com> |
||
|
|
0520910bfd |
Control: name the token file and spot a stale one when a call is unauthorized (#4664) (#4670)
* claim: #4664 * Control: name the token file and spot a stale one when a call is unauthorized (#4664) When the app refuses a token that the MCP client read from a token file, the error now names that file, when it was written and how long ago, without printing the token. The app also writes `<port>.pid` beside the token file (its process id and, on Linux, its start time) and removes both at exit; when that process has exited, the error says the token file is stale. The process check runs only after a refusal, and the token file itself stays one line, so existing clients keep working. Document force-quit leftovers and the MSIX AppData redirection. * Bench assistant: read the token out of the new ClientToken Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> --------- Co-authored-by: bherbruck <brennen.herbruck@gmail.com> Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com> |
||
|
|
46f24f2394 |
Save the browser's view with the design, and an option to hide the origin by default (#1849)
The Origin folder's eye, a finished sketch's Show Profile and Show Dimensions, and body locks move from UiState into the design's saved visibility (origin_hidden, hidden_profiles, shown_dimensions, locked_bodies), so each tab keeps its own and they survive closing the design. The Sketches folder uses the saved browser folder (c0/sketches in hidden_folders); ui.set/ui.inspect keep showOrigin, showSketches, hiddenProfiles, shownDims and lockedBodies. Preferences > Design > "Hide origin by default": a design that never toggled its Origin eye follows the preference. New fields are a pending format change (format/pending/browser-view-state.rs). Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
1236863b17 |
Coil: its parameters show and can be edited (#3862) (#3915)
* claim: #3862 * Coil: its parameters show and can be edited (#3862) The Coil dialog now shows every setting solid.coil takes: the section (circular or square), where it sits on the diameter (inside, center or outside), the start angle and a Clockwise option. Edit Feature on a coil reopens the dialog filled in from the feature, and OK redefines it; before, it fell back to a timeline.edit line in the command search. Settings left at their default are not sent, so OK on an unchanged edit keeps the coil as it was. |
||
|
|
4f4b1fc2d2 | Sketch: select edge midpoints for horizontal and vertical constraints (#5159) | ||
|
|
d5a79a77e6 |
Agent chat: Pick context and Attach selection for elements, features and bodies (#2286) (#2288)
* claim: #2224 Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> * Agent chat: keep Send in view for a long message, open "View attached" (#2224) The message box sat in a fixed 92-point reserve, so a long message grew it past the panel and took Send, Stop and Attach view with it. The box is now a panel of its own at the bottom: it grows upwards up to a cap, then scrolls, and the conversation takes what is left. The picture sent with a message is kept on it (once the agent starts on the message), and the "View attached" caption opens it in a window. Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> * Agent chat: a message's pictures as thumbnails with a hover preview and a viewer (#2224) Instead of a window on the far side of the screen: the pictures of a message show as small thumbnails under it, hovering one shows it bigger for as long as the pointer stays, and a click opens a viewer over the app with the message's pictures one at a time (previous and next, arrow keys, Esc). A picture carries a note shown with it, so attachments of other kinds can use the same viewer. Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> * claim: #2286 Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> * Agent chat: Attach selection sends what is selected in the model with the message (#2286) A checkbox beside Attach view. The selection is read when the message is sent (also for a queued one) and described: faces and edges with the names, indices and points the tools take plus their size and place, features by name and kind, bodies by name; at most 64, the rest counted. The agent gets it as text after the message; the conversation shows the message as typed with the things as grouped chips (hover for what the agent was told). Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> * WIP: the chat's context picker dialog (#2286) * Agent chat: Pick context, a picker for elements, features and bodies (#2286) A button beside Attach selection opens the picker: a dialog with Elements, Features and Bodies inputs, so clicks in the model, the timeline and the browser pick into the active one (clicking again takes one out), with the usual highlight. OK puts the picks as chips with an x above the message box; they go with the next message like an attached selection (text for the agent, chips in the conversation) and the tray is empty again afterwards. Cancel keeps what was picked before. The control channel opens it with pick. Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> * Agent chat: Attach selection counts and describes what was clicked, not the pieces of a rim (#2286) A click on a circular rim or a split surface selects all its pieces for the commands. The checkbox counted them one by one and the agent got one entry per piece (reported on macOS). They are now grouped back into the click they came from: one chip, one entry with the whole size, and the indices of every piece in its detail. Edge details are looked up by position as well as index. Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> * Agent chat: a message's picture is kept on exactly that message (#2224) The turn now carries its message's place in the conversation (also through a queue and a send again after a sign-in), so its picture is kept there, once, and never on an older message that also wanted one (review of #2225). Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> * Agent chat: use the UI kit's checkbox and button and the font tokens (guard tests) Main's UI-kit guard tests reject raw egui checkboxes, buttons and font sizes in the chat panel; Attach selection, Pick context, the chip remove button and the chip fonts now come from ui_kit and Tokens. Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com> Co-authored-by: bherbruck <brennen.herbruck@gmail.com> |
||
|
|
5d47946e4d |
Downloads: say Windows code signing comes from SignPath Foundation (#6207)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
69cfd89ae8 | Regenerate THIRD-PARTY-LICENSES.txt and docs/features.md [skip ci] | ||
|
|
9e6e0b8df1 |
Render workspace: complete experimental ribbon, resources and effects integration (#5493) (#5494)
* wip(render): reconcile completed material and image pipeline source with 0.20 (#5493)
Source-only integration reference for staged review, not a merge-ready aggregate.
Donor: 0xlillith/solidcraft@aea20b0115.
Upstream:
|
||
|
|
b7b25f9e2b |
Render workspace: first basic delivery to main (#6050)
* Normalize UI container violation paths across platforms (#5599)
Report repository-relative paths with forward slashes so diagnostics and the existing nested-package regression assertions agree on Windows and Unix. Keep the container detection rules unchanged.
Validation: official ui-containers gate and all seven focused xtask tests passed; rustfmt and diff checks passed. Only xtask/dependencies were compiled; no application build or heavy tests.
(cherry picked from commit 44b58d8e103a5fbc816ebf7c22b8de768ddf592b)
Scoped render-branch prerequisite from #4507, coordinated under #5493. No unrelated translation/kernel changes are included. Fresh Windows fmt, seven ui_containers regressions and the production container gate pass on render base
|
||
|
|
a633a67e63 |
Preferences: choose the window system on Linux (Wayland or X11) (#3083) (#3084)
* claim: #3083 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * WIP: choose the window system on Linux in Preferences (#3083) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Preferences: a window system set over the control channel is saved for the next start again The merge kept main's check in ui.prefs, which only looked at the anti-aliasing. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Preferences: the window system section drops the restart badge its note already states Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
5ca7c2fb95 |
Sketch tools: pressing a tool's shortcut again cycles its creation modes (#2459) (#3564)
* claim: #2459 * Sketch tools: pressing a tool's shortcut again cycles its creation modes (#2459) R starts 2-Point Rectangle; R again, before the first corner, switches to 3-Point, Center, Rounded, then back to 2-Point (likewise for Circle, Line, Arc, Slot, Polygon and Spline keys). A held key's auto-repeat doesn't cycle, the first press always starts the bound mode, and once a point is placed the key keeps the tool and its points. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Sketch tools: the mode cycling is a Sketch preference, off by default (#2459) A tool's shortcut pressed again keeps restarting the tool, as before; Preferences > Sketch > "Pressing a tool's shortcut again switches its mode" turns the cycling on. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Phanoob <phanoob@gmail.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
592f6a6fee |
ci: fix local scheduling and Windows test baselines (#4941)
* ci: repair local nextest scheduling and Windows fixtures * test: refresh MSVC robustness references and isolate GNU policy Integrate the Windows reference records from #3361 and the target-environment selection and recording policy from #4159. Keep shared records and comparison tolerances intact, and retain seed 36 as an existing failure tracked by #3583. Co-authored-by: Ray <raykholo@users.noreply.github.com> Co-authored-by: chris <christopher.nourse@gmail.com> * test: make CI subprocess and revolve fixtures deterministic --------- Co-authored-by: Ray <raykholo@users.noreply.github.com> Co-authored-by: chris <christopher.nourse@gmail.com> |
||
|
|
4612c5e6a9 |
Equal with three or more curves selected makes them all equal (#4985) (#5139)
* claim: #4985 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Equal with three or more curves selected makes them all equal (#4985) With more than two curves selected, Equal fell back to the pick tool and applied nothing. sketch.constraint.equal also takes curves: [2..200], each made equal to the first in one step (strict, so a conflict changes nothing), and the toolbar sends a selection of three or more curves as that list. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
c0da9fe861 |
Trim cuts a line at its tangent point on a circle (#5074) (#5163)
* claim: #5074 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Trim cuts a line at its tangent point on a circle (#5074) A line the solver made tangent to a circle touches it within rounding noise, and the exact intersection missed the touch whenever the noise fell outside, so trim found no cut there and deleted the whole line. Trim takes its cut points from intersections_within at its own merge distance, as profile detection does (#588). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
19db763899 |
Tapped Hole: verified metric fine, UNC/UNF and parallel G/Rp catalogues (#4178)
* feat: expand tapped-hole catalogue with metric fine and Unified sizes * docs: distinguish metric designations from expanded tapped catalogue * feat: add internal pipe catalogue and checked Rc profile data * Connect parallel G and Rp catalogues to cylindrical tapped holes * fix(i18n): register tapped thread catalogue labels * fix(i18n): complete thread labels in required locales |
||
|
|
9a737bd63c |
Linked components: joints keep their face after Update Links (#3330) (#4874)
* claim: #3330 * Linked components: joints keep their face after Update Links (#3330) A linked design comes in as STEP text, which keeps no face names, so the faces of its bodies were named by their place in the file (`face:<k>`). An edit of the part that adds a face earlier in the file (a second hole of the same size) gave that place to another face, and a joint on the linked part moved there silently. When a link is made or updated, each imported face is matched to the part face it was written from (the same geometry), and the Import feature keeps that face's name in the part (`Feature::link_faces`, a new pending format change). The linked face is named `F<import>🔗<digest of that name>`, pieces keeping their qualifiers, so references follow the part's own history through Update Links as they do inside the part, and a face the part no longer has is reported. Linked faces still answer to `face:<k>`, so older references keep resolving; Update Links warns about joints that use them and reports joints that no longer solve. * Linked faces: a solid's twin keeps its own names; renamed faces count as an update Two solids of a part alike in one place each take the names of the solid the file names them after. Update Links reports a link whose part named its faces differently since as updated (a joint may follow that name to another face), not as unchanged; only a link getting its first names stays unchanged. * Linked faces: Extract to File carries the design's face names too Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> --------- Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com> Co-authored-by: bherbruck <brennen.herbruck@gmail.com> Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com> |
||
|
|
8b65d41b31 |
Expression completion: keep longer names visible when the typed word is a unit (#3663) (#3664)
* claim: #3663 * Expression completion: keep longer names listed when the typed word is a unit (#3663) Typing `rad` into an expression box showed nothing because `rad` is the radians unit and a word that is itself a known token closed the popup. The popup now stays open on such a word. A complete name (`width` with `width_extra` defined) opens it unarmed: the longer names are listed with no row selected, Enter submits what was typed and Tab moves on; Up or Down picks a row, after which Enter or Tab complete it as before. A unit means something only after a number, so a unit typed anywhere else (`rad` on the way to `radius`) is a prefix like any other: the popup is armed and Enter completes `radius` instead of submitting one radian. A complete token is extended only by names that start with it (`in` lists `inner`, not `rounding`), a typed unit offers no other units (`in` does not list `inch`), and a unit right after a number (`2 in`, the form every dialog starts its sizes in) opens no popup at all, so nothing sits over a dialog's OK button. Fixes #3663 Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> --------- Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com> |
||
|
|
4dc30c092d |
Mirror and pattern: a pattern or mirror feature as the source (#395) (#3998)
* claim: #395 * Mirror and pattern: a pattern or mirror feature as the source (#395) A pattern or mirror of features refused another pattern or mirror as a source ("Pat cannot be patterned or mirrored yet"). Such a source now stands for what it copied: its own sources are replayed at each of its transforms moved by each of ours, to any depth up to eight. Copies of a feature picked directly keep the instance numbers they had, so existing designs keep their face names; copies made through a nested pattern or mirror are numbered after them, so one feature reached two ways never names two copies alike. A pattern or mirror of bodies as the source is still refused. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
e67ae66f3e |
Renaming a parameter follows it into sheet-metal and plastic rules and canvases (#4420) (#4423)
* claim: #4420 * Renaming a parameter follows it into sheet-metal and plastic rules and canvases (#4420) Document::rename_param rewrote other parameters, feature inputs, dimensions, configurations and joints, but not the expressions of sheet metal and plastic rules or the plane a canvas lies on, so after a rename the sheet metal and plastic features using them failed with "unknown parameter" and the canvas left the view. It renames them there now, and param_users lists them (a rule's field, a canvas's input), so a parameter they use can't be deleted. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Parameters: rules' features in drives and the graph; shared rule field lists (#4420) A sheet metal or plastic rule that uses a parameter makes the sheet metal (or plastic) features rebuild when it changes, so parameters.users lists them in drives and parameters.graph links them. SheetRule::fields/fields_mut and PlasticRule::fields_mut replace the hand-written copies of the rules' fields in params.rs, eval.rs and sheet.manage_rules. Suggested by @CamWight. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fmt (#4420) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |