Dahak Builds 251573a5a4 MCP: compare the model with a reference picture (#1486) (#6416)
* claim: #1486

* Compare picture: overlap and edge offsets of the model against a reference picture (#1486)

inspect.compare_picture lays the model's silhouette over the part found in a
PNG or JPEG and slides it to the best overlap: overlap (0..1), the model's
edges against the picture's in mm at nine stations, and an overlay PNG. The
MCP tool compare_picture runs it and hands the overlay back as an image block.

inspect.silhouette grows a reusable silhouette::outline for the model side.

* chore: re-trigger checks (defaults line already present in PR body)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* i18n: carry the Compare Picture label in Arabic, Hebrew and Vietnamese too

The complete-catalog guard (every_complete_catalog_carries_every_english_message)
failed because the pending file covered only en/ja/zh; ar, he and vi are
complete catalogs and need the key as well.

* Compare picture: one uniform scale, capped fit, sturdier part finding

Review on #6416: fit no longer stretches the axes apart (width is the default,
both scales uniformly by width and reports aspect_mismatch); the fitted model
takes the same MAX_GRID cap as the picture; the border flood seeds only from
border pixels near the border's main colour, reads alpha, retries at a
stricter step, and says which case failed; the slide searches the whole
placement range instead of a tenth around the centre; the model's holes get
the picture's fill rule; crop becomes crop_px / crop_fraction with explicit
units. Pins #1486's bracket (overlap 0.865, bottom -10 mm at the upright) and
adds a regression test per problem.

* Compare picture: alpha only for a see-through border, part_fills_crop, outline-only wording

Review re-test on #6416: one translucent backdrop pixel no longer switches the read to
alpha — alpha decides only when most of the border is see-through, and any ink is then
part, so a part drawn at alpha 100 survives; part_fills_crop: true takes the crop box as
the part itself, for one view cropped tight off a board where the part takes most of the
border and the flood would keep the backdrop strip instead; a third backdrop pass compares
each pixel to the border's main colour, so a white part on (245, 245, 245) JPEG at quality
75 separates; the command, tool and docs descriptions now say the compare is outline only:
holes are not compared. A banded light backdrop stays a follow-up. A test per case.

* MCP compare: format the picture tests

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-11-01 18:30:18 +00:00
2026-10-31 19:20:15 -04:00
2026-10-11 16:07:46 +08:00

SolidCraft

SolidCraft

An open-source parametric 3D CAD application built in pure Rust.
Sketch, constrain, and build solids with a parametric feature timeline. Change a dimension and watch your model rebuild. Run it on your desktop, in your browser, or let AI agents model through the built-in MCP server.

Download for Windows Download for macOS Download for Linux Get it from the Snap Store Try it in your browser

Website · Download · Try it in the browser · Documentation · CI powered by Blacksmith Discord · SolidCore

CI Latest release Downloads Licence Discord Listed on Remade Stars

tangency-labs%2Fsolidcraft | Trendshift tangency-labs%2Fsolidcraft | Trendshift (Rust)

SolidCraft: model a Raspberry Pi 4 case from an empty design: a sketch dimensioned with parameters, extrude, fillets and shell, a rim rounded in one pick, standoffs patterned on the board's mounting holes, port cut-outs, vent slots, "Pi 4" engraved in a font, a PETG material with its mass in Properties, and a height change in Parameters

A Raspberry Pi 4 case from an empty design: a sketch dimensioned with the board's parameters, extrude, fillet, shell, the rim rounded in one pick, an M2.5 standoff patterned on the 58 × 49 mm hole rectangle, port cut-outs, vent slots, "Pi 4" engraved in DejaVu Sans Bold and a PETG material defined in the design, with its mass in Properties, then height 24 → 32 mm in Parameters and it all rebuilds. 6× playback with the idle pauses cut. Full video, recorded with the demo script.

Download

ARM64 and 32-bit builds, portable zip, .deb, .rpm, Flatpak and the other packages are on the downloads page. The macOS app is signed with a Developer ID and notarized by Apple. The Windows downloads aren't signed yet: choose More info, then Run anyway in SmartScreen. On SolidCraft 0.11 to 0.14, download once by hand; see updating.

What works

Early but usable for simple parts: 75 of 76 public reference parts match their analytic or FreeCAD-computed volume, area, centre of mass and bounding box (oracle); the other is a tracked bug.

  • Sketches and constraints: lines, arcs, splines, text and more, solved by our own constraint solver, with parameter-driven dimensions.
  • Features: extrude, revolve, sweep, loft, fillet, chamfer, shell, draft, holes, threads, patterns, mirror, split and combine on an editable parametric timeline.
  • Parameters and configurations with unit-aware expressions.
  • Assemblies with joints, motion studies, contact sets, interference and mass properties.
  • Sheet metal with flanges, hems, fold/unfold and flat patterns, and plastic enclosure features.
  • Files: STEP, IGES, 3MF, STL, OBJ and glTF in and out where supported, URDF export, .sc designs (.solidcraft files from earlier releases still open).
  • Desktop app, browser app, headless CLI and MCP server, all running the same commands.

The full list is in docs/capabilities.md and docs/features.md; status and plans are in ROADMAP.md. See also what people built, 3D mouse support and the architecture.

Build from source

cargo run --release -p solidcraft -- --sample      # desktop app with a sample part
cargo run --release -p solidcraft-cli -- commands  # the command registry
cargo run --release -p solidcraft-cli -- run examples/bracket.json --out bracket.step
cargo xtask ci                                     # fmt, clippy, tests, icons, assets, layers, wasm

More commands, the Windows cross-build and the browser build are in docs/building.md.

AI agents (MCP)

solidcraft-cli mcp is a Model Context Protocol server. Headless it runs its own design session, or with --connect it drives the running app so you can watch. Claude Code: claude mcp add solidcraft -- solidcraft-cli mcp. If a terminal doesn't find solidcraft-cli (older Windows installers don't put it on PATH), give its full path (by default "C:\\Program Files\\SolidCraft\\solidcraft-cli.exe"). Tools, access rules and an example session: docs/mcp.md.

Scripts

A script is a JSON list of the same commands the UI runs, executed with solidcraft-cli run. Format and example: docs/scripts.md. Pages can also be driven through the browser command API.

Contributing

Help is welcome. CONTRIBUTING.md covers how to build and test, the code map, the clean-room and licence rules, and where help is wanted most. Open work is in GitHub issues; chat is on Discord.

Sponsors

CI powered by Blacksmith

SolidCraft's continuous integration runs on Blacksmith, which sponsors its CI minutes.

Disclaimer

The files in this repository are provided as is, without warranty, liability or indemnity, and Tangency Labs and the contributors accept no responsibility for any harmful or unlawful use of them: read DISCLAIMER.md.

Licence

MIT OR Apache-2.0, at your option. Developed under the clean-room contribution rules; third-party code and assets retain their documented licences and attribution.

SolidCraft is independent. Behaviour is designed from public documentation, general CAD conventions and user feedback. Reference tests use analytic values and open-source tools. SolidCraft is not affiliated with, sponsored by or endorsed by Autodesk, Dassault Systèmes, PTC, Siemens or any other CAD vendor. Fusion, AutoCAD, Inventor, SolidWorks, Onshape, Creo, Blender and Tinkercad are trademarks of their respective owners, named only to describe compatibility (see NOTICE).

S
Description
No description provided
Readme 298 MiB
Languages
Rust 96.7%
Python 2.2%
WGSL 0.4%
JavaScript 0.3%
Shell 0.2%