* kernel: a blend runs along chains of several faces and lines closed rims up (#764) A blend's chain may run along the boundaries of several faces (a tube's rim along the halves of its wall): each edge continues from its own best-facing face, read station by station. Before, a chain had to be the edges of one face, so every rim of a revolved or cylindrical surface was refused. Two closed chains blend from matching seams: the second chain's start (searched by arclength, then narrowed) and direction are the ones that put each station closest to its partner, so rims whose seams sit apart no longer twist. A picked `seam` point on each chain fixes the start instead. A closed chain against an open one is refused. Closed chains leave towards each other's centroid, not a point on the rim. Stations are read on the edges' own curves, not on the chords of the length table (they sat up to the chord's sagitta inside a curved edge), and the reported gap is measured to the curves. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM * kernel: closed blend chains run round the same way; Hermite strip and seam tests (#764) The second of two closed chains runs round the same way as the first (by their area vectors), so a picked seam turns the blend by just the angle between the seams instead of folding it over. The nearer pairing decides only when the loops stand almost at right angles. Tests for the issue's gates: the blend between two offset box rims is the analytic cubic Hermite strip (control points from the chord) and keeps the top faces' normal along both seams; picked seams a quarter apart turn the blend a quarter round. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM * surface.blend: `seam` picks where each chain's stations start (#764) A point on each chain, saved with the feature (one pending format change), moved with the design like `align`, and refused when it is not two points. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM * surface.blend: a test between two tube rims, their seams picked and saved (#764) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM * Blend dialog: edges at each end, continuity and bulge per end, stitch (#764) SURFACE › CREATE › Blend Surface opens a dialog: the edges the blend leaves and the ones it arrives at, each end's continuity (G0–G3) and bulge, and Stitch to both bodies. Edit Feature brings it back and keeps what the dialog does not show (align and seam points). Labels in every locale catalog. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM * ROADMAP: M8 Blend runs along several faces, pairs closed rims and has a dialog (#764) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM * kernel: a blend station on the vertex between two support faces is read on the neighbour (#764) A station where a tube wall's two halves meet sits at a corner of one half's parameters; with a leave direction that turns round the wall (tubes off each other's axis) the shape could not be read there and the blend was refused. The neighbouring chain edge's face holds the same point and reads it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM * blend: review clean-ups (#764) - ChainLine keeps one list of samples instead of four parallel lists. - frames_on and boundary_gap take the chain's ChainLine instead of rebuilding it. - A station is read on the neighbouring face only when it sits on the vertex the two edges share, each face once, and each face keeps its own walk. - The seam rule (a closed chain starts at it, an open one runs from the nearer end) lives in ChainLine::start_at_seam; pair_with reuses the start of its both-ways search. - support_faces projects with curveblend::project; loop_area sits with plane_through. - surface.blend parses `align` and `seam` through one point_pair; the Blend and Ruled dialogs share body_and_edges. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM --------- Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
SolidCraft
An open-source parametric 3D CAD application built in pure Rust.
Sketch, constrain, and build solids with a parametric feature timeline. Change a dimension
and watch your model rebuild. Run it on your desktop, in your browser, or let AI agents
model through the built-in MCP server.
Website ·
Download ·
Try it in the browser ·
Documentation ·
Discord ·
SolidCore
A Raspberry Pi 4 case from an empty design: a sketch dimensioned with the board's parameters, extrude, fillet, shell, the rim rounded in one pick, an M2.5 standoff patterned on the 58 × 49 mm hole rectangle, port cut-outs, vent slots, "Pi 4" engraved in DejaVu Sans Bold and a PETG material defined in the design, with its mass in Properties, then height 24 → 32 mm in Parameters and it all rebuilds. 9× playback. Full video, recorded with the demo script.
Download
- Windows: the installer, or
winget install bherbruck.SolidCraft. - macOS: the disk image (Apple silicon and Intel).
- Linux: the AppImage, or
sudo snap install solidcraft(Snap Store). - Web: try it in your browser, no install.
ARM64 and 32-bit builds, portable zip, .deb, .rpm, Flatpak and the other packages are on the downloads page. The downloads aren't signed yet: on Windows choose More info, then Run anyway in SmartScreen; on macOS right-click SolidCraft and choose Open the first time. On SolidCraft 0.11 to 0.14, download once by hand; see updating.
What works
Early but usable for simple parts: 75 of 76 public reference parts match their analytic or FreeCAD-computed volume, area, centre of mass and bounding box (oracle); the other is a tracked bug.
- Sketches and constraints: lines, arcs, splines, text and more, solved by our own constraint solver, with parameter-driven dimensions.
- Features: extrude, revolve, sweep, loft, fillet, chamfer, shell, draft, holes, threads, patterns, mirror, split and combine on an editable parametric timeline.
- Parameters and configurations with unit-aware expressions.
- Assemblies with joints, motion studies, contact sets, interference and mass properties.
- Sheet metal with flanges, hems, fold/unfold and flat patterns, and plastic enclosure features.
- Files: STEP, IGES, 3MF, STL, OBJ and glTF in and out where supported, URDF export,
.solidcraftdesigns. - Desktop app, browser app, headless CLI and MCP server, all running the same commands.
The full list is in docs/capabilities.md and docs/features.md; status and plans are in ROADMAP.md. See also what people built, 3D mouse support and the architecture.
Build from source
cargo run --release -p solidcraft -- --sample # desktop app with a sample part
cargo run --release -p solidcraft-cli -- commands # the command registry
cargo run --release -p solidcraft-cli -- run examples/bracket.json --out bracket.step
cargo xtask ci # fmt, clippy, tests, icons, assets, layers, wasm
More commands, the Windows cross-build and the browser build are in docs/building.md.
AI agents (MCP)
solidcraft-cli mcp is a Model Context Protocol server. Headless it
runs its own design session, or with --connect it drives the running app so you can watch.
Claude Code: claude mcp add solidcraft -- solidcraft-cli mcp. Tools, access rules and an
example session: docs/mcp.md.
Scripts
A script is a JSON list of the same commands the UI runs, executed with solidcraft-cli run.
Format and example: docs/scripts.md. Pages can also be driven through the
browser command API.
Contributing
Help is welcome. CONTRIBUTING.md covers how to build and test, the code map, the clean-room and licence rules, and where help is wanted most. Open work is in GitHub issues; chat is on Discord.
Sponsors
SolidCraft's continuous integration runs on Blacksmith, which sponsors its CI minutes.
Licence
MIT OR Apache-2.0, at your option. Developed under the clean-room contribution rules; third-party code and assets retain their documented licences and attribution.
SolidCraft is independent. Behaviour is designed from public documentation, general CAD conventions and user feedback. Reference tests use analytic values and open-source tools. SolidCraft is not affiliated with, sponsored by or endorsed by Autodesk, Dassault Systèmes, PTC, Siemens or any other CAD vendor. Fusion, AutoCAD, Inventor, SolidWorks, Onshape, Creo, Blender and Tinkercad are trademarks of their respective owners, named only to describe compatibility (see NOTICE).

