* ui_kit: search_picker, a filtered dropdown with a custom entry Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Agent chat: endpoints list their models with names, say when listing fails, and OpenClaw and OpenRouter presets (#2582) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Agent chat: a typed model goes to endpoints and to agents that offer a model option Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Agent chat: the header's model pickers search and take a custom model The popup can't grow once it is open, so search_picker now fixes the height of what changes below its box when it opens: the custom row or a late list could otherwise end up out of reach. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * AI preferences: pick an endpoint's model when adding it and on its card (#2582) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Agent chat: model picker rows read from the left, and a refused typed model says which From running it: list_picker centres its text, which reads badly for a long list of ids, and an agent's own refusal can say no more than "Internal error". The search box also asks for a repaint while it waits for the focus, so an idle window does not stop short of it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Agent chat: docs for the model picker Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Agent chat: an endpoint's answer that is no model list says so, an empty list too, and editing lists with the kept key A 200 without a `data` array (a web page where the endpoint should be, as OpenClaw's gateway serves until its chat endpoint is enabled) was cached as a successful, empty listing, so the picker stayed blank with nothing to say and never asked again. Now it is an error with its own note, an empty list says so, and both are asked for again the next time. The Edit dialog lists its endpoint's models when it opens, with the kept key read from the keychain on the listing's thread, as the card does; the key stays out of the field. The method-not-found test expects the refusal notice that names the model, as every refused model gets since this branch. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * Agent chat: models from several providers fold under their providers inside the picker As Chemiseblanc does in #10187: with two or more groups, `search_picker` draws each group as a header with a chevron, the name and how many of its choices are listed, and a click folds or opens it. Before anything is typed only the current value's group (and the one the caller asks for) is open; a group with a match opens once something is typed; a fold made by hand stays until the popup closes. Enter takes the first row shown, so never one folded away. A lone group keeps its plain heading. The header's model picker feeds its providers in as groups, so the separate provider drop-down goes; the control channel's `provider` now says which group opens first. A header click gives the focus back to the search box, so typing goes on filtering. The dialog's listing test checks what kind of listing it got rather than translated words, which the listing thread may render in another language than the test's. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * Agent chat: rustfmt the provider groups Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * Agent chat: an endpoint's models named `Vendor: Model` fold under their vendors OpenRouter lists `openai/gpt-6.1-terra` as "OpenAI: GPT-6.1 Terra". A listing whose ids read `vendor/model` and whose names read `Vendor: Model` now names its providers, so the picker folds it under its vendors like a multi-provider agent; the rows read the model's name, and the id stays in the tooltip and in the search. An agent's own `Provider: …` word still comes first. One vendor is one flat list, as before. The Add dialog's picker has no current model to prefer, so with nothing to prefer every group starts open; folding is a click away. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
SolidCraft
An open-source parametric 3D CAD application built in pure Rust.
Sketch, constrain, and build solids with a parametric feature timeline. Change a dimension
and watch your model rebuild. Run it on your desktop, in your browser, or let AI agents
model through the built-in MCP server.
Website ·
Download ·
Try it in the browser ·
Documentation ·
Discord ·
SolidCore
A Raspberry Pi 4 case from an empty design: a sketch dimensioned with the board's parameters, extrude, fillet, shell, the rim rounded in one pick, an M2.5 standoff patterned on the 58 × 49 mm hole rectangle, port cut-outs, vent slots, "Pi 4" engraved in DejaVu Sans Bold and a PETG material defined in the design, with its mass in Properties, then height 24 → 32 mm in Parameters and it all rebuilds. 6× playback with the idle pauses cut. Full video, recorded with the demo script.
Download
- Windows: the installer.
- macOS: the disk image (Apple silicon and Intel).
- Linux: the AppImage, or
sudo snap install solidcraft(Snap Store). - Web: try it in your browser, no install.
ARM64 and 32-bit builds, portable zip, .deb, .rpm, Flatpak and the other packages are on the downloads page. The macOS app is signed with a Developer ID and notarized by Apple. The Windows downloads aren't signed yet: choose More info, then Run anyway in SmartScreen. On SolidCraft 0.11 to 0.14, download once by hand; see updating.
What works
Early but usable for simple parts: 75 of 76 public reference parts match their analytic or FreeCAD-computed volume, area, centre of mass and bounding box (oracle); the other is a tracked bug.
- Sketches and constraints: lines, arcs, splines, text and more, solved by our own constraint solver, with parameter-driven dimensions.
- Features: extrude, revolve, sweep, loft, fillet, chamfer, shell, draft, holes, threads, patterns, mirror, split and combine on an editable parametric timeline.
- Parameters and configurations with unit-aware expressions.
- Assemblies with joints, motion studies, contact sets, interference and mass properties.
- Sheet metal with flanges, hems, fold/unfold and flat patterns, and plastic enclosure features.
- Files: STEP, IGES, 3MF, STL, OBJ and glTF in and out where supported, URDF export,
.scdesigns (.solidcraftfiles from earlier releases still open). - Desktop app, browser app, headless CLI and MCP server, all running the same commands.
The full list is in docs/capabilities.md and docs/features.md; status and plans are in ROADMAP.md. See also what people built, 3D mouse support and the architecture.
Build from source
cargo run --release -p solidcraft -- --sample # desktop app with a sample part
cargo run --release -p solidcraft-cli -- commands # the command registry
cargo run --release -p solidcraft-cli -- run examples/bracket.json --out bracket.step
cargo xtask ci # fmt, clippy, tests, icons, assets, layers, wasm
More commands, the Windows cross-build and the browser build are in docs/building.md.
AI agents (MCP)
solidcraft-cli mcp is a Model Context Protocol server. Headless it
runs its own design session, or with --connect it drives the running app so you can watch.
Claude Code: claude mcp add solidcraft -- solidcraft-cli mcp. If a terminal doesn't find
solidcraft-cli (older Windows installers don't put it on PATH), give its full path (by default
"C:\\Program Files\\SolidCraft\\solidcraft-cli.exe"). Tools, access rules and an example session:
docs/mcp.md.
Scripts
A script is a JSON list of the same commands the UI runs, executed with solidcraft-cli run.
Format and example: docs/scripts.md. Pages can also be driven through the
browser command API.
Contributing
Help is welcome. CONTRIBUTING.md covers how to build and test, the code map, the clean-room and licence rules, and where help is wanted most. Open work is in GitHub issues; chat is on Discord.
Sponsors
SolidCraft's continuous integration runs on Blacksmith, which sponsors its CI minutes.
Disclaimer
The files in this repository are provided as is, without warranty, liability or indemnity, and Tangency Labs and the contributors accept no responsibility for any harmful or unlawful use of them: read DISCLAIMER.md.
Licence
MIT OR Apache-2.0, at your option. Developed under the clean-room contribution rules; third-party code and assets retain their documented licences and attribution.
SolidCraft is independent. Behaviour is designed from public documentation, general CAD conventions and user feedback. Reference tests use analytic values and open-source tools. SolidCraft is not affiliated with, sponsored by or endorsed by Autodesk, Dassault Systèmes, PTC, Siemens or any other CAD vendor. Fusion, AutoCAD, Inventor, SolidWorks, Onshape, Creo, Blender and Tinkercad are trademarks of their respective owners, named only to describe compatibility (see NOTICE).

