* claim: #4784 * Part properties: one table of keys, each with its scope, check and label (#4784) SolidCraft's part-property keys (project, part number, revision, author, organization, description, licence) were declared once but listed again by hand in each command, error, dialog and window. They are now one table, metadata::KEYS: each row has the key, where it may be set (Scope: the design, a component or both), how its value is checked and the message id of its label. A new key is one row. Metadata::set is told whose metadata it changes (Owner::Design or Owner::Component), and a key is taken where its scope covers that owner. is_well_known, both set commands, document.metadata, component.metadata, the refusals, the Design Properties dialog and the Bill of Materials window read the table; the hand-written lists are gone (WELL_KNOWN, the label match whose fallback named any unknown key "License", the window's three labels). metadata::BOM_KEYS names, in column order, the keys a bill of materials lists for each part: component.metadata returns them, component.metadata.set takes each as a parameter of its own and the window edits them; a test keeps each one a row of the table that a component takes. Free properties use the keys' text rule (metadata::check_text) instead of a copy of it. The params docs point to document.metadata's properties instead of repeating the keys. Every key accepted before still is, on the design and on a component. Two things change: - a refused key or a full metadata on a component says "part property" ("`bogus` is not a part property: …", "part properties are limited to …"), not "design property"; - changing the design's own properties no longer evaluates the model. The fields that change no geometry are named once, Document::with_part_properties_of: the design's metadata, and each component's metadata and free properties. It compares them first and copies the design only when one differs, as before. The shortcut is for a session's own edits only. A command that gives the session another design (doc.open, file.new, doc.recover: through Session::replace_design, which now counts them) is refreshed in full, however little the new design differs from the one before, so its joints are solved and its occurrence state pruned. Before, opening a design that differed from the open one only in render settings or component properties skipped that; with the design's properties in the list it would have for two revisions of one part too. Tests: the table (one row per key, the dialog's order); the bill of materials' keys (rows a component takes, in column order); each scope on each owner, and refusals that name the owner (the empty key, an unknown key, a 256-byte key shown cut); the text check at 4096 bytes, line breaks, tabs and control characters; hostile keys and values refused without a change; only-part-property changes in each scope, and changes beside them (units, a component's name, an added, removed or swapped component); document.metadata.set, remove, undo and redo evaluate nothing; opening a revision that differs only in its author solves its joint; the component wording, the shortcuts and the limits; the dialog's and the window's labels from the table. What the tests can't reach: every row is Scope::Both, so a known key refused for its owner (the wrong-owner branch of check) can't happen yet. It becomes live with the first single-scope row, bom_type, a component-only key. Left for later (not this topic): - Metadata::others() ignores scope, so a component-only key stored on the design would be neither a dialog field nor listed under other tools' data. It matters from the first single-scope key (bom_type). - assembly.bom's rows, its CSV columns and the window's grid headers still name the three keys by hand; the bill of materials module's rewrite will read BOM_KEYS. - The bill of materials types (P1, #5107, into drawings) still use WELL_KNOWN and the two-argument set: once this is on main, bom_type is rebuilt on it as one KEYS row with Scope::Component, set through Owner::Component. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
SolidCraft
An open-source parametric 3D CAD application built in pure Rust.
Sketch, constrain, and build solids with a parametric feature timeline. Change a dimension
and watch your model rebuild. Run it on your desktop, in your browser, or let AI agents
model through the built-in MCP server.
Website ·
Download ·
Try it in the browser ·
Documentation ·
Discord ·
SolidCore
A Raspberry Pi 4 case from an empty design: a sketch dimensioned with the board's parameters, extrude, fillet, shell, the rim rounded in one pick, an M2.5 standoff patterned on the 58 × 49 mm hole rectangle, port cut-outs, vent slots, "Pi 4" engraved in DejaVu Sans Bold and a PETG material defined in the design, with its mass in Properties, then height 24 → 32 mm in Parameters and it all rebuilds. 6× playback with the idle pauses cut. Full video, recorded with the demo script.
Download
- Windows: the installer.
- macOS: the disk image (Apple silicon and Intel).
- Linux: the AppImage, or
sudo snap install solidcraft(Snap Store). - Web: try it in your browser, no install.
ARM64 and 32-bit builds, portable zip, .deb, .rpm, Flatpak and the other packages are on the downloads page. The downloads aren't signed yet: on Windows choose More info, then Run anyway in SmartScreen; on macOS right-click SolidCraft and choose Open the first time. On SolidCraft 0.11 to 0.14, download once by hand; see updating.
What works
Early but usable for simple parts: 75 of 76 public reference parts match their analytic or FreeCAD-computed volume, area, centre of mass and bounding box (oracle); the other is a tracked bug.
- Sketches and constraints: lines, arcs, splines, text and more, solved by our own constraint solver, with parameter-driven dimensions.
- Features: extrude, revolve, sweep, loft, fillet, chamfer, shell, draft, holes, threads, patterns, mirror, split and combine on an editable parametric timeline.
- Parameters and configurations with unit-aware expressions.
- Assemblies with joints, motion studies, contact sets, interference and mass properties.
- Sheet metal with flanges, hems, fold/unfold and flat patterns, and plastic enclosure features.
- Files: STEP, IGES, 3MF, STL, OBJ and glTF in and out where supported, URDF export,
.solidcraftdesigns. - Desktop app, browser app, headless CLI and MCP server, all running the same commands.
The full list is in docs/capabilities.md and docs/features.md; status and plans are in ROADMAP.md. See also what people built, 3D mouse support and the architecture.
Build from source
cargo run --release -p solidcraft -- --sample # desktop app with a sample part
cargo run --release -p solidcraft-cli -- commands # the command registry
cargo run --release -p solidcraft-cli -- run examples/bracket.json --out bracket.step
cargo xtask ci # fmt, clippy, tests, icons, assets, layers, wasm
More commands, the Windows cross-build and the browser build are in docs/building.md.
AI agents (MCP)
solidcraft-cli mcp is a Model Context Protocol server. Headless it
runs its own design session, or with --connect it drives the running app so you can watch.
Claude Code: claude mcp add solidcraft -- solidcraft-cli mcp. If a terminal doesn't find
solidcraft-cli (older Windows installers don't put it on PATH), give its full path (by default
"C:\Program Files\SolidCraft\solidcraft-cli.exe"). Tools, access rules and an example session:
docs/mcp.md.
Scripts
A script is a JSON list of the same commands the UI runs, executed with solidcraft-cli run.
Format and example: docs/scripts.md. Pages can also be driven through the
browser command API.
Contributing
Help is welcome. CONTRIBUTING.md covers how to build and test, the code map, the clean-room and licence rules, and where help is wanted most. Open work is in GitHub issues; chat is on Discord.
Sponsors
SolidCraft's continuous integration runs on Blacksmith, which sponsors its CI minutes.
Licence
MIT OR Apache-2.0, at your option. Developed under the clean-room contribution rules; third-party code and assets retain their documented licences and attribution.
SolidCraft is independent. Behaviour is designed from public documentation, general CAD conventions and user feedback. Reference tests use analytic values and open-source tools. SolidCraft is not affiliated with, sponsored by or endorsed by Autodesk, Dassault Systèmes, PTC, Siemens or any other CAD vendor. Fusion, AutoCAD, Inventor, SolidWorks, Onshape, Creo, Blender and Tinkercad are trademarks of their respective owners, named only to describe compatibility (see NOTICE).

