lewis2e 718d5a4383 Intersection Curve: take two sketch curves, no helper surfaces (#11048) (#11049)
* claim: #11048

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Intersection Curve: take two sketch curves, no helper surfaces (#11048)

Intersection Curve now also takes curves of other sketches. Each curve
stands in for the surface you would get by extruding it along its own
sketch's normal, both ways and as far as needed, so two sketch curves
(or a curve and a face) give their 3D crossing without the two Surface >
Extrude features it used to take. The surface is never added to the
model. Sketches on parallel planes are refused with an error saying why.

The result stays a linked 3D wire that follows edits to either curve.
In the tool, a curve of another sketch fills a side like a face does;
after the first pick the status bar asks for the second, a right-click
starts the picks over, and the hint returns once the curve is made.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Intersection Curve: keep other tools' right-click, update the tooltip, add a UI scenario (#11048)

The right-click change now applies to Intersection Curve only: Project to
Surface and Spun Profile behave as on main again.

The toolbar tooltip now says Intersection Curve also takes curves of other
sketches, in every catalog that has it, using each language's wording from
the Project to Surface tooltip.

New UI scenario intersection_curve_from_two_sketch_curves: a line on XY and
a line on YZ give one linked 3D wire along X at y = 0, z = 5; it also checks
the second-pick prompt and that a right-click starts the picks over.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GG4jU9aCv381PgLCsseQMP

* Intersection Curve: a picked spline wall meets whole, in one curve (#11048, #9009)

On the SMLib kernel a fit-point spline's wall is one face per span, and
Mesh::surface_patch keeps smooth-joined faces apart, so a face pick met
only the span under the pick and gave part of the crossing (#9009 again,
for faces as well as for sketch curves). A face pick now takes the faces
joined across seams and smooth joins, never across a crease.

The imprint also splits a crossing at every face boundary of either
side, so a crossing came as one wire per span. The pieces are now joined
end to end into one wire, keeping their exact curves; a piece that runs
the other way is reversed as a record curve.

A curve side's sweep is sized from the other body's exact bounds, not
its display mesh. The #9009 test's premise that the spans are one
surface_patch no longer holds and is removed; its checks are unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Intersection Curve: a picked face joins only tangent spline faces, from exact geometry (#11048)

Which faces a face pick means is now decided on the exact surfaces, not the
display mesh: the picked face and the spline faces joined to it at least
tangentially (the kernel's seam check), so a spline wall's spans still meet
as one (#9009) while a plane, a round or any analytic face is that face
alone. The pieces of a crossing are joined within ten times the kernel's
intersection tolerance instead of a fixed 1e-4 mm.

Tests: a flat face beside a round and the round itself each give their own
crossing; two sketch curves give one curve at 1/100 and 100 times the size.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Known-failing tests: the picked spline wall's intersection curve passes now (#11048, #9009)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-05 06:52:54 +00:00
2026-11-03 15:35:34 -05:00
2026-10-11 16:07:46 +08:00

SolidCraft

SolidCraft

An open-source parametric 3D CAD application built in pure Rust.
Sketch, constrain, and build solids with a parametric feature timeline. Change a dimension and watch your model rebuild. Run it on your desktop, in your browser, or let AI agents model through the built-in MCP server.

Download for Windows Download for macOS Download for Linux Get it from the Snap Store Try it in your browser

Website · Download · Try it in the browser · Documentation · CI powered by Blacksmith Discord · SolidCore

CI Latest release Downloads Licence Discord Listed on Remade Stars

tangency-labs%2Fsolidcraft | Trendshift tangency-labs%2Fsolidcraft | Trendshift (Rust)

SolidCraft: model a Raspberry Pi 4 case from an empty design: a sketch dimensioned with parameters, extrude, fillets and shell, a rim rounded in one pick, standoffs patterned on the board's mounting holes, port cut-outs, vent slots, "Pi 4" engraved in a font, a PETG material with its mass in Properties, and a height change in Parameters

A Raspberry Pi 4 case from an empty design: a sketch dimensioned with the board's parameters, extrude, fillet, shell, the rim rounded in one pick, an M2.5 standoff patterned on the 58 × 49 mm hole rectangle, port cut-outs, vent slots, "Pi 4" engraved in DejaVu Sans Bold and a PETG material defined in the design, with its mass in Properties, then height 24 → 32 mm in Parameters and it all rebuilds. 6× playback with the idle pauses cut. Full video, recorded with the demo script.

Download

ARM64 and 32-bit builds, portable zip, .deb, .rpm, Flatpak and the other packages are on the downloads page. The macOS app is signed with a Developer ID and notarized by Apple. The Windows downloads aren't signed yet: choose More info, then Run anyway in SmartScreen. On SolidCraft 0.11 to 0.14, download once by hand; see updating.

What works

Early but usable for simple parts: 75 of 76 public reference parts match their analytic or FreeCAD-computed volume, area, centre of mass and bounding box (oracle); the other is a tracked bug.

  • Sketches and constraints: lines, arcs, splines, text and more, solved by our own constraint solver, with parameter-driven dimensions.
  • Features: extrude, revolve, sweep, loft, fillet, chamfer, shell, draft, holes, threads, patterns, mirror, split and combine on an editable parametric timeline.
  • Parameters and configurations with unit-aware expressions.
  • Assemblies with joints, motion studies, contact sets, interference and mass properties.
  • Sheet metal with flanges, hems, fold/unfold and flat patterns, and plastic enclosure features.
  • Files: STEP, IGES, 3MF, STL, OBJ and glTF in and out where supported, URDF export, .sc designs (.solidcraft files from earlier releases still open).
  • Desktop app, browser app, headless CLI and MCP server, all running the same commands.

The full list is in docs/capabilities.md and docs/features.md; status and plans are in ROADMAP.md. See also what people built, 3D mouse support and the architecture.

Build from source

cargo run --release -p solidcraft -- --sample      # desktop app with a sample part
cargo run --release -p solidcraft-cli -- commands  # the command registry
cargo run --release -p solidcraft-cli -- run examples/bracket.json --out bracket.step
cargo xtask ci                                     # fmt, clippy, tests, icons, assets, layers, wasm

More commands, the Windows cross-build and the browser build are in docs/building.md.

AI agents (MCP)

solidcraft-cli mcp is a Model Context Protocol server. Headless it runs its own design session, or with --connect it drives the running app so you can watch. Claude Code: claude mcp add solidcraft -- solidcraft-cli mcp. If a terminal doesn't find solidcraft-cli (older Windows installers don't put it on PATH), give its full path (by default "C:\\Program Files\\SolidCraft\\solidcraft-cli.exe"). Tools, access rules and an example session: docs/mcp.md.

Scripts

A script is a JSON list of the same commands the UI runs, executed with solidcraft-cli run. Format and example: docs/scripts.md. Pages can also be driven through the browser command API.

Contributing

Help is welcome. CONTRIBUTING.md covers how to build and test, the code map, the clean-room and licence rules, and where help is wanted most. Open work is in GitHub issues; chat is on Discord.

Sponsors

CI powered by Blacksmith

SolidCraft's continuous integration runs on Blacksmith, which sponsors its CI minutes.

Disclaimer

The files in this repository are provided as is, without warranty, liability or indemnity, and Tangency Labs and the contributors accept no responsibility for any harmful or unlawful use of them: read DISCLAIMER.md.

Licence

MIT OR Apache-2.0, at your option. Developed under the clean-room contribution rules; third-party code and assets retain their documented licences and attribution.

SolidCraft is independent. Behaviour is designed from public documentation, general CAD conventions and user feedback. Reference tests use analytic values and open-source tools. SolidCraft is not affiliated with, sponsored by or endorsed by Autodesk, Dassault Systèmes, PTC, Siemens or any other CAD vendor. Fusion, AutoCAD, Inventor, SolidWorks, Onshape, Creo, Blender and Tinkercad are trademarks of their respective owners, named only to describe compatibility (see NOTICE).

S
Description
No description provided
Readme 298 MiB
Languages
Rust 96.7%
Python 2.2%
WGSL 0.4%
JavaScript 0.3%
Shell 0.2%