Mario Geiger c1760d4857 Point clouds: draw a PLY file's edges and faces (#8817) (#8820)
* Point clouds: a PLY file's edges and faces as beads and triangles (#5151)

A PLY file's `edge` and `face` elements become segments and triangles
between the cloud's points (a face as a fan), each with its own properties;
a file with them is read whole, since thinning would cut them. A point's
numbers vary along the segments and across the triangles that meet there,
an element's are constant on it.

Segments with `width` and `height` are drawn as beads of that stadium
cross-section, meeting mitred where one runs into the next, from one
indexed template; without them, as lines. Points no segment or triangle
ends on stay dots. A range filter cuts an element where its value crosses
an end, on the GPU and in the tracks alike: each element weighs its
measure (a dot 1, a segment its length, a triangle its area, each kind
over its own total) and spreads it exactly over the values it covers, a
segment's evenly and a triangle's as the tent its corners make.

Columns saved without the element they are on are on the points, so
designs saved with point properties alone still open.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Point clouds: past max_points a PLY is thinned again; the near plane cuts elements exactly

A PLY with edges or faces and more vertices than `max_points` was refused, where it used to be
thinned. It is thinned again: thinning would cut its edges and faces, so they are left out, with
a warning, and raising `max_points` keeps them.

A segment or triangle crossing the near plane moved its corners behind the eye to a made-up
place, which pulled a wedge across the view. A triangle now keeps its true clip-space corners,
which the rasteriser clips exactly. A bead is cut where its axis crosses the plane, a crossing
exact because clip-space coordinates are affine along a line, and its numbers are exact there.

A ramp accepts MAX_BINS bands but an element was split into 4097, so a ramp finer than that lost
measure: half of a segment at 8192. Only the whole numbers have more bands than MAX_BINS.

`xtask mesh-decisions` reads any field named `triangles` as a mesh; a cloud's own complex holds
none, so its three modules are skipped with that reason.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Point clouds: a ramp's measure is whole past both its ends; a column on the points says nothing

A ramp of MAX_BINS bands has one band below it and one above it, so an element running past both
ends crosses MAX_BINS + 1 bands past its first. The limit was one short, and such an element lost
what lay above the ramp.

A column on the points now leaves `on` out when saved, so a design holding only points keeps the
form it had, as the field's comment and the pending format note already say.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Point clouds: a set filter keeps part of a bead whose ends differ; an unreadable point takes only what ends on it

The set filter's whole-element test read the first corner alone, so a bead whose
first end was not kept vanished, while the range tracks counted the part kept. It
now drops a bead only when one value at every corner is not kept; otherwise the
fragments decide, as for triangles.

A PLY with edges or faces and one unreadable vertex was refused whole. It now
keeps the subcomplex the readable points span, renumbered, with its numbers, and
warns about what it left out. A file with numbers on its points gains the same.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Point clouds: build the triangle corner weights without a dynamic vector write

The Windows D3D12 shader compiler rejected w[vi] = 1.0 (error X3500).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-11-05 10:23:20 +00:00
2026-11-03 15:35:34 -05:00
2026-10-11 16:07:46 +08:00

SolidCraft

SolidCraft

An open-source parametric 3D CAD application built in pure Rust.
Sketch, constrain, and build solids with a parametric feature timeline. Change a dimension and watch your model rebuild. Run it on your desktop, in your browser, or let AI agents model through the built-in MCP server.

Download for Windows Download for macOS Download for Linux Get it from the Snap Store Try it in your browser

Website · Download · Try it in the browser · Documentation · CI powered by Blacksmith Discord · SolidCore

CI Latest release Downloads Licence Discord Listed on Remade Stars

tangency-labs%2Fsolidcraft | Trendshift tangency-labs%2Fsolidcraft | Trendshift (Rust)

SolidCraft: model a Raspberry Pi 4 case from an empty design: a sketch dimensioned with parameters, extrude, fillets and shell, a rim rounded in one pick, standoffs patterned on the board's mounting holes, port cut-outs, vent slots, "Pi 4" engraved in a font, a PETG material with its mass in Properties, and a height change in Parameters

A Raspberry Pi 4 case from an empty design: a sketch dimensioned with the board's parameters, extrude, fillet, shell, the rim rounded in one pick, an M2.5 standoff patterned on the 58 × 49 mm hole rectangle, port cut-outs, vent slots, "Pi 4" engraved in DejaVu Sans Bold and a PETG material defined in the design, with its mass in Properties, then height 24 → 32 mm in Parameters and it all rebuilds. 6× playback with the idle pauses cut. Full video, recorded with the demo script.

Download

ARM64 and 32-bit builds, portable zip, .deb, .rpm, Flatpak and the other packages are on the downloads page. The macOS app is signed with a Developer ID and notarized by Apple. The Windows downloads aren't signed yet: choose More info, then Run anyway in SmartScreen. On SolidCraft 0.11 to 0.14, download once by hand; see updating.

What works

Early but usable for simple parts: 75 of 76 public reference parts match their analytic or FreeCAD-computed volume, area, centre of mass and bounding box (oracle); the other is a tracked bug.

  • Sketches and constraints: lines, arcs, splines, text and more, solved by our own constraint solver, with parameter-driven dimensions.
  • Features: extrude, revolve, sweep, loft, fillet, chamfer, shell, draft, holes, threads, patterns, mirror, split and combine on an editable parametric timeline.
  • Parameters and configurations with unit-aware expressions.
  • Assemblies with joints, motion studies, contact sets, interference and mass properties.
  • Sheet metal with flanges, hems, fold/unfold and flat patterns, and plastic enclosure features.
  • Files: STEP, IGES, 3MF, STL, OBJ and glTF in and out where supported, URDF export, .sc designs (.solidcraft files from earlier releases still open).
  • Desktop app, browser app, headless CLI and MCP server, all running the same commands.

The full list is in docs/capabilities.md and docs/features.md; status and plans are in ROADMAP.md. See also what people built, 3D mouse support and the architecture.

Build from source

cargo run --release -p solidcraft -- --sample      # desktop app with a sample part
cargo run --release -p solidcraft-cli -- commands  # the command registry
cargo run --release -p solidcraft-cli -- run examples/bracket.json --out bracket.step
cargo xtask ci                                     # fmt, clippy, tests, icons, assets, layers, wasm

More commands, the Windows cross-build and the browser build are in docs/building.md.

AI agents (MCP)

solidcraft-cli mcp is a Model Context Protocol server. Headless it runs its own design session, or with --connect it drives the running app so you can watch. Claude Code: claude mcp add solidcraft -- solidcraft-cli mcp. If a terminal doesn't find solidcraft-cli (older Windows installers don't put it on PATH), give its full path (by default "C:\\Program Files\\SolidCraft\\solidcraft-cli.exe"). Tools, access rules and an example session: docs/mcp.md.

Scripts

A script is a JSON list of the same commands the UI runs, executed with solidcraft-cli run. Format and example: docs/scripts.md. Pages can also be driven through the browser command API.

Contributing

Help is welcome. CONTRIBUTING.md covers how to build and test, the code map, the clean-room and licence rules, and where help is wanted most. Open work is in GitHub issues; chat is on Discord.

Sponsors

CI powered by Blacksmith

SolidCraft's continuous integration runs on Blacksmith, which sponsors its CI minutes.

Disclaimer

The files in this repository are provided as is, without warranty, liability or indemnity, and Tangency Labs and the contributors accept no responsibility for any harmful or unlawful use of them: read DISCLAIMER.md.

Licence

MIT OR Apache-2.0, at your option. Developed under the clean-room contribution rules; third-party code and assets retain their documented licences and attribution.

SolidCraft is independent. Behaviour is designed from public documentation, general CAD conventions and user feedback. Reference tests use analytic values and open-source tools. SolidCraft is not affiliated with, sponsored by or endorsed by Autodesk, Dassault Systèmes, PTC, Siemens or any other CAD vendor. Fusion, AutoCAD, Inventor, SolidWorks, Onshape, Creo, Blender and Tinkercad are trademarks of their respective owners, named only to describe compatibility (see NOTICE).

S
Description
No description provided
Readme 298 MiB
Languages
Rust 96.7%
Python 2.2%
WGSL 0.4%
JavaScript 0.3%
Shell 0.2%