CamWight c6d361347f Section Analysis: the cap is marked by true depth, so far edges no longer take a cap band (#6328) (#6332)
With a section shown, the marking pass decided where the cap shows (the stencil) and wrote the
depth everything after it tests against. #1768 gave it the faces' FACE_BIAS for the second job,
so edges draw over their own faces (#1434). For the first job its slope part is unfair: next to an
edge where a back face seen through the cut meets a front face, the front face won a band about a
pixel wide although the back face is nearer. The cap skipped that band, and the edge line showed
through the cut.

#6363 marked those samples again from the back faces, pulled toward the eye as far as FACE_BIAS
pushes. That closes the gaps beside the edges, but the pull also lets back faces win wherever they
lie within the push of a front face, along every body's far silhouettes, and the cap hatches that
band. On bherbruck's block, the band away from the cut went from 58 px orthographic and 534 px
perspective before #6363 to 618 and 780 with it. In the app, his filleted hub showed it in every
frame of a 36-step orbit in both projections.

This replaces that pass. While a section is shown the opaque model now draws in four steps (`Cut`):
1. mark: the faces by their true depth (no push): colour, the stencil and depth;
2. a triangle over the viewport sets the depth back to the far plane, colour and stencil kept;
3. push: the faces again with FACE_BIAS, depth only, so the depth is what unsectioned frames have
   and edges draw over their faces as before;
4. cap: depth only, as #6728 made it; the mark pass has drawn the cap's colour and hatch, as fs_solid
   draws a back face seen through the cut.
The window pass's depth reset and this one are one helper, `depth_reset_pipeline`, for either
depth direction, and its passes are built by #6728's `solid_writes`. Unsectioned frames are unchanged. The CPU rasterizer already chose the cap by
true depth.

Tests (crates/gpu/tests/depth.rs), with the device's float depth and the 24-bit fallback:
- a_cut_hides_the_edges_behind_it (new): bherbruck's block cut at y = -16, home view, orthographic
  and perspective. No edge shows through the cap, and away from the cut the picture is a box of
  just the kept part's: 0 px orthographic and 1 perspective (main: 618 and 780).
- bherbruck's pocket and hub tests from #6363 are kept and pass (pocket 0 px; hub 1 and 2 px over
  its twelve views, as with #6363's pass).
- an_edge_on_a_face_draws_whole_at_any_angle and
  an_edge_just_behind_a_face_stays_hidden_on_a_large_design also run with a section shown.

In the app (safe mode, WARP), with 625 patterned cylinders cut by a section, the frame time is
that of main (#6363): 33.5 against 34.3 ms at the home view, 34.1 against 35.2 ms with the model
filling the view.

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 11:16:44 +00:00
2026-10-23 12:49:05 -04:00
2026-10-11 16:07:46 +08:00

SolidCraft

SolidCraft

An open-source parametric 3D CAD application built in pure Rust.
Sketch, constrain, and build solids with a parametric feature timeline. Change a dimension and watch your model rebuild. Run it on your desktop, in your browser, or let AI agents model through the built-in MCP server.

Download for Windows Download for macOS Download for Linux Get it from the Snap Store Try it in your browser

Website · Download · Try it in the browser · Documentation · CI powered by Blacksmith Discord · SolidCore

CI Latest release Downloads Licence Discord Listed on Remade Stars

tangency-labs%2Fsolidcraft | Trendshift tangency-labs%2Fsolidcraft | Trendshift (Rust)

SolidCraft: model a Raspberry Pi 4 case from an empty design: a sketch dimensioned with parameters, extrude, fillets and shell, a rim rounded in one pick, standoffs patterned on the board's mounting holes, port cut-outs, vent slots, "Pi 4" engraved in a font, a PETG material with its mass in Properties, and a height change in Parameters

A Raspberry Pi 4 case from an empty design: a sketch dimensioned with the board's parameters, extrude, fillet, shell, the rim rounded in one pick, an M2.5 standoff patterned on the 58 × 49 mm hole rectangle, port cut-outs, vent slots, "Pi 4" engraved in DejaVu Sans Bold and a PETG material defined in the design, with its mass in Properties, then height 24 → 32 mm in Parameters and it all rebuilds. 6× playback with the idle pauses cut. Full video, recorded with the demo script.

Download

ARM64 and 32-bit builds, portable zip, .deb, .rpm, Flatpak and the other packages are on the downloads page. The downloads aren't signed yet: on Windows choose More info, then Run anyway in SmartScreen; on macOS right-click SolidCraft and choose Open the first time. On SolidCraft 0.11 to 0.14, download once by hand; see updating.

What works

Early but usable for simple parts: 75 of 76 public reference parts match their analytic or FreeCAD-computed volume, area, centre of mass and bounding box (oracle); the other is a tracked bug.

  • Sketches and constraints: lines, arcs, splines, text and more, solved by our own constraint solver, with parameter-driven dimensions.
  • Features: extrude, revolve, sweep, loft, fillet, chamfer, shell, draft, holes, threads, patterns, mirror, split and combine on an editable parametric timeline.
  • Parameters and configurations with unit-aware expressions.
  • Assemblies with joints, motion studies, contact sets, interference and mass properties.
  • Sheet metal with flanges, hems, fold/unfold and flat patterns, and plastic enclosure features.
  • Files: STEP, IGES, 3MF, STL, OBJ and glTF in and out where supported, URDF export, .solidcraft designs.
  • Desktop app, browser app, headless CLI and MCP server, all running the same commands.

The full list is in docs/capabilities.md and docs/features.md; status and plans are in ROADMAP.md. See also what people built, 3D mouse support and the architecture.

Build from source

cargo run --release -p solidcraft -- --sample      # desktop app with a sample part
cargo run --release -p solidcraft-cli -- commands  # the command registry
cargo run --release -p solidcraft-cli -- run examples/bracket.json --out bracket.step
cargo xtask ci                                     # fmt, clippy, tests, icons, assets, layers, wasm

More commands, the Windows cross-build and the browser build are in docs/building.md.

AI agents (MCP)

solidcraft-cli mcp is a Model Context Protocol server. Headless it runs its own design session, or with --connect it drives the running app so you can watch. Claude Code: claude mcp add solidcraft -- solidcraft-cli mcp. If a terminal doesn't find solidcraft-cli (older Windows installers don't put it on PATH), give its full path (by default "C:\Program Files\SolidCraft\solidcraft-cli.exe"). Tools, access rules and an example session: docs/mcp.md.

Scripts

A script is a JSON list of the same commands the UI runs, executed with solidcraft-cli run. Format and example: docs/scripts.md. Pages can also be driven through the browser command API.

Contributing

Help is welcome. CONTRIBUTING.md covers how to build and test, the code map, the clean-room and licence rules, and where help is wanted most. Open work is in GitHub issues; chat is on Discord.

Sponsors

CI powered by Blacksmith

SolidCraft's continuous integration runs on Blacksmith, which sponsors its CI minutes.

Licence

MIT OR Apache-2.0, at your option. Developed under the clean-room contribution rules; third-party code and assets retain their documented licences and attribution.

SolidCraft is independent. Behaviour is designed from public documentation, general CAD conventions and user feedback. Reference tests use analytic values and open-source tools. SolidCraft is not affiliated with, sponsored by or endorsed by Autodesk, Dassault Systèmes, PTC, Siemens or any other CAD vendor. Fusion, AutoCAD, Inventor, SolidWorks, Onshape, Creo, Blender and Tinkercad are trademarks of their respective owners, named only to describe compatibility (see NOTICE).

S
Description
No description provided
Readme 298 MiB
Languages
Rust 96.7%
Python 2.2%
WGSL 0.4%
JavaScript 0.3%
Shell 0.2%