ca9ebb44db
* claim: #3324 * Sheet metal: refuse a flat pattern that no longer matches the body A feature that is not sheet metal can change a sheet body's material without its sheet model knowing: a mirror combined into it, an extrude joined onto it, a fillet or chamfer on a corner. The flat pattern, the DXF and the bend table then wrote the sheet as it was before, a part other than the one in the design, with no warning. The evaluator now notes, per sheet, the first such feature: one that changes the body's shape while its sheet model stays the same. That feature warns, and sheet.flat_pattern, sheet.export_dxf (also with per_body) and sheet.export_bend_table refuse with "not supported yet", naming it. A sheet metal feature, or machining the sheet keeps as cut-outs, rebuilds the body from the model: it clears the note and warns that the change is not kept. Moving the body, splitting its faces and cosmetic threads leave the flat pattern as it is. * Sheet metal: a modelled thread is refused in the flat pattern too Only a cosmetic thread leaves a sheet body's material as it is. A modelled thread cuts the thread profile into the hole, which the flat pattern does not have, and a later sheet metal feature dropped it without a word. It now marks the sheet like a fillet does: it warns, the flat pattern, DXF and bend table refuse naming it, and the feature that rebuilds the body says the thread is not kept.