* SMLib wrapper: a swept or mitred turn for constant rounds (Turn) Brep::blend_dropping takes a Turn: Mitre (the default, as before) or Swept, which sets solidcore's FilletSession::set_swept_turns before the corners are made. A swept turn solidcore refuses at CreateFilletCorners comes back as Error::TurnRefused with its reason and place (NoRoom at a concave side edge, else CornerUnsupported). Swept is for Blend::Round only. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel: fillet rounds turn in a mitre or swept (FilletTurn) fillet_removing, fillet_max, fillet_max_each and fillet_each take a FilletTurn and hand it to SMLib, through the reblend of earlier rounds at a later corner too. A swept corner solidcore does not build is refused as invalid input with its reason and place: no smaller radius builds it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Design: a fillet saves its turn, mitre (default) or swept FeatureKind::Fillet gets `turn` (FilletTurn: mitre, the default and not saved, or swept), one pending format file. Evaluation hands it to the kernel, pattern copies included, and refuses a swept turn with a style, fit, corner or setbacks the kernel's swept corner does not take (SWEPT_TAKES). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * solid.fillet: the turn parameter, and the command's input and output schemas `turn: mitre|swept` on solid.fillet, refused when unknown or with options a swept corner does not take. solid.fillet now has its contract (FilletParams) and reply type (FilletResult), registered with checked!, and leaves schema/unconverted.txt. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Fillet dialog: a Turns choice, Mitre or Swept A Constant radius fillet's Turns row sends `turn: swept`; choosing a narrowed radius or a curvature corner puts it back to Mitre, and Swept puts those back. Its tooltip says what each does where two rounds turn round a corner edge. New strings in a pending locale file (en, de, ja, ko, zh); glossary entry. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Fillet turn: the schema tests' fixes and the complete catalogs' strings The no-contract example in the schema tests is solid.chamfer now that solid.fillet has one; the reply test checks the mid-radii form against the contract (solidcore refuses that law's corner yet, #430) instead of building it; Arabic, Hebrew and Vietnamese, complete catalogs, get the new strings. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Fillet schema test: variable and spline forms checked against the contract solidcore fails a variable round on a box edge at this pin (status 1001, as variable_radius_on_a_box_edge), so the reply test checks those forms against the contract instead of building them. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Fillet turn: the swept rig cases pass; the MCP no-contract example is solid.chamfer cov-fillet-turn-swept-boss-base-r1 and cov-fillet-turn-swept-pocket-sharp-corner-refused-r1 pass now that solid.fillet takes `turn`: off the rig's known-failing list. The MCP bridge test's example of a command without a contract was solid.fillet, which has one now. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ --------- Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
SolidCraft
An open-source parametric 3D CAD application built in pure Rust.
Sketch, constrain, and build solids with a parametric feature timeline. Change a dimension
and watch your model rebuild. Run it on your desktop, in your browser, or let AI agents
model through the built-in MCP server.
Website ·
Download ·
Try it in the browser ·
Documentation ·
Discord ·
SolidCore
A Raspberry Pi 4 case from an empty design: a sketch dimensioned with the board's parameters, extrude, fillet, shell, the rim rounded in one pick, an M2.5 standoff patterned on the 58 × 49 mm hole rectangle, port cut-outs, vent slots, "Pi 4" engraved in DejaVu Sans Bold and a PETG material defined in the design, with its mass in Properties, then height 24 → 32 mm in Parameters and it all rebuilds. 6× playback with the idle pauses cut. Full video, recorded with the demo script.
Download
- Windows: the installer.
- macOS: the disk image (Apple silicon and Intel).
- Linux: the AppImage, or
sudo snap install solidcraft(Snap Store). - Web: try it in your browser, no install.
ARM64 and 32-bit builds, portable zip, .deb, .rpm, Flatpak and the other packages are on the downloads page. The macOS app is signed with a Developer ID and notarized by Apple. The Windows downloads aren't signed yet: choose More info, then Run anyway in SmartScreen. On SolidCraft 0.11 to 0.14, download once by hand; see updating.
What works
Early but usable for simple parts: 75 of 76 public reference parts match their analytic or FreeCAD-computed volume, area, centre of mass and bounding box (oracle); the other is a tracked bug.
- Sketches and constraints: lines, arcs, splines, text and more, solved by our own constraint solver, with parameter-driven dimensions.
- Features: extrude, revolve, sweep, loft, fillet, chamfer, shell, draft, holes, threads, patterns, mirror, split and combine on an editable parametric timeline.
- Parameters and configurations with unit-aware expressions.
- Assemblies with joints, motion studies, contact sets, interference and mass properties.
- Sheet metal with flanges, hems, fold/unfold and flat patterns, and plastic enclosure features.
- Files: STEP, IGES, 3MF, STL, OBJ and glTF in and out where supported, URDF export,
.scdesigns (.solidcraftfiles from earlier releases still open). - Desktop app, browser app, headless CLI and MCP server, all running the same commands.
The full list is in docs/capabilities.md and docs/features.md; status and plans are in ROADMAP.md. See also what people built, 3D mouse support and the architecture.
Build from source
cargo run --release -p solidcraft -- --sample # desktop app with a sample part
cargo run --release -p solidcraft-cli -- commands # the command registry
cargo run --release -p solidcraft-cli -- run examples/bracket.json --out bracket.step
cargo xtask ci # fmt, clippy, tests, icons, assets, layers, wasm
More commands, the Windows cross-build and the browser build are in docs/building.md.
AI agents (MCP)
solidcraft-cli mcp is a Model Context Protocol server. Headless it
runs its own design session, or with --connect it drives the running app so you can watch.
Claude Code: claude mcp add solidcraft -- solidcraft-cli mcp. If a terminal doesn't find
solidcraft-cli (older Windows installers don't put it on PATH), give its full path (by default
"C:\\Program Files\\SolidCraft\\solidcraft-cli.exe"). Tools, access rules and an example session:
docs/mcp.md.
Scripts
A script is a JSON list of the same commands the UI runs, executed with solidcraft-cli run.
Format and example: docs/scripts.md. Pages can also be driven through the
browser command API.
Contributing
Help is welcome. CONTRIBUTING.md covers how to build and test, the code map, the clean-room and licence rules, and where help is wanted most. Open work is in GitHub issues; chat is on Discord.
Sponsors
SolidCraft's continuous integration runs on Blacksmith, which sponsors its CI minutes.
Disclaimer
The files in this repository are provided as is, without warranty, liability or indemnity, and Tangency Labs and the contributors accept no responsibility for any harmful or unlawful use of them: read DISCLAIMER.md.
Licence
MIT OR Apache-2.0, at your option. Developed under the clean-room contribution rules; third-party code and assets retain their documented licences and attribution.
SolidCraft is independent. Behaviour is designed from public documentation, general CAD conventions and user feedback. Reference tests use analytic values and open-source tools. SolidCraft is not affiliated with, sponsored by or endorsed by Autodesk, Dassault Systèmes, PTC, Siemens or any other CAD vendor. Fusion, AutoCAD, Inventor, SolidWorks, Onshape, Creo, Blender and Tinkercad are trademarks of their respective owners, named only to describe compatibility (see NOTICE).

