Jerry
33 lines
1.3 KiB
Markdown
33 lines
1.3 KiB
Markdown
# 2. Circular Flange With Bolt-Hole Pattern
|
|
|
|
|
|
|
|
## Prompt
|
|
|
|
Create a single solid circular flange as a STEP model in millimeters. The flange is a cylinder with an outside diameter of 80 mm and a thickness of 10 mm. Its axis is vertical along Z, with the bottom face at Z = 0 and the center at X = 0, Y = 0.
|
|
|
|
Add a central vertical through-bore with diameter 30 mm.
|
|
|
|
Add six equally spaced vertical through-holes, each 6 mm in diameter, on a 60 mm bolt-circle diameter.
|
|
|
|
Add a 1.5 mm fillet to the top and bottom outside circular edges.
|
|
|
|
Export as a STEP file.
|
|
|
|
## Test Cases
|
|
|
|
| Test | Expected result |
|
|
| --- | --- |
|
|
| STEP import | File imports successfully |
|
|
| Solid count | Exactly one watertight solid |
|
|
| Outer diameter | 80 mm |
|
|
| Thickness | 10 mm |
|
|
| Central bore | Diameter 30 mm vertical through-hole |
|
|
| Coaxiality | Central bore coaxial with flange outer cylinder |
|
|
| Bolt-hole count | Six |
|
|
| Bolt-hole diameter | 6 mm each |
|
|
| Bolt circle | Hole centers lie on 60 mm diameter circle |
|
|
| Angular spacing | 60 degrees between adjacent bolt holes |
|
|
| Fillets | 1.5 mm fillets on top and bottom outside circular edges |
|
|
| Negative check | No missing bolt holes; no misplaced non-circular holes; no extra patterns |
|