Jerry
52 lines
2.2 KiB
Markdown
52 lines
2.2 KiB
Markdown
# 7. Radial-Engine-Style Cylinder With Cooling Fins
|
|
|
|
|
|
|
|
## Prompt
|
|
|
|
Create a single solid radial-engine-style cylinder as a STEP model in millimeters.
|
|
|
|
The main cylinder axis is vertical along Z and centered at the origin.
|
|
|
|
Create a central barrel with diameter 36 mm and height 70 mm, bottom at Z = 0.
|
|
|
|
Around the barrel, add 12 horizontal circular cooling fins. Each fin is 2 mm thick in Z, has outside diameter 62 mm, and is spaced every 5 mm from Z = 10 mm to Z = 65 mm.
|
|
|
|
Add a thicker base flange at the bottom, outside diameter 70 mm and thickness 8 mm, with six vertical mounting holes of diameter 5 mm on a 56 mm bolt circle.
|
|
|
|
Add a top cap cylinder, diameter 44 mm and height 8 mm, from Z = 70 mm to Z = 78 mm.
|
|
|
|
Add an angled spark-plug boss protruding from the side of the top cap. The boss is a cylinder of diameter 12 mm and length 24 mm, angled upward at 35 degrees from horizontal, with its axis pointing outward in the positive X direction.
|
|
|
|
Add a 5 mm diameter hole through the boss along its own axis.
|
|
|
|
Add small 1 mm fillets to the outer fin edges and base flange edges.
|
|
|
|
Export as a STEP file.
|
|
|
|
## Test Cases
|
|
|
|
| Test | Expected result |
|
|
| --- | --- |
|
|
| STEP import | File imports successfully |
|
|
| Solid count | One fused watertight solid |
|
|
| Main axis | Vertical along Z |
|
|
| Barrel | Diameter 36 mm, 70 mm tall |
|
|
| Barrel placement | Centered at origin; bottom at Z = 0 |
|
|
| Cooling fin count | 12 |
|
|
| Fin diameter | Diameter 62 mm |
|
|
| Fin thickness | 2 mm each |
|
|
| Fin spacing | Nominally 5 mm from Z = 10 to Z = 65 |
|
|
| Base flange | Diameter 70 mm, 8 mm thick |
|
|
| Mounting hole count | Six |
|
|
| Mounting hole diameter | Diameter 5 mm |
|
|
| Mounting bolt circle | Diameter 56 mm |
|
|
| Mounting hole spacing | 60 degrees between holes |
|
|
| Top cap | Diameter 44 mm, 8 mm tall, Z = 70 to 78 mm |
|
|
| Spark-plug boss | Diameter 12 mm cylinder, 24 mm long |
|
|
| Boss orientation | Points outward in +X direction |
|
|
| Boss angle | 35 degrees upward from horizontal |
|
|
| Boss bore | Diameter 5 mm through-hole along boss axis |
|
|
| Fillets | 1 mm outer fin-edge and flange-edge fillets |
|
|
| Negative check | Boss bore must be coaxial with angled boss; fins must not be missing or merged into one thick cylinder |
|