<pid kp kv|dampratio [ki imax] [slewmax]> is a PID controller with real position and velocity setpoint inputs on a single force output, plus an optional feedforward input. With a zero velocity setpoint it reproduces <position> bit-exactly; the input signature is any subset of [pos, vel, ff], selected with input="..." and recorded as mjtCtrlInput bits in
actuator_ctrlspec; absent setpoint inputs are fixed at zero, so the control vector contains no inert entries.
kp and kv are single-sourced in the affine bias parameters (biasprm[1,2]) with no gainprm mirror: every consumer of the position-servo shape
(dampratio conversion, inheritrange, qDeriv) reads one location, which is what makes the bit-exact <position> parity possible. Controller state uses dyntype 'pid' with slot-gated activations in the order [slew, integral], following the dcmotor slot idiom: slewmax (dynprm[1]) rate limits the effective position setpoint through an activation holding it;
ki (gainprm[0]) integrates the position error -- wrapped on rotational transmissions -- with anti-windup clamping of the integrand at imax (dynprm[0]). Both features require the pos input. Servo input unpacking is shared with the dcmotor controller (unpackServoInputs); per-input ranges are exposed as posrange/velrange/ffrange.
This subsumes the functionality of the mujoco.pid plugin with proper activation state: correct under all integrators, visible to keyframes, act sensors and reset. Migration: kp/ki/kd map to kp/ki/kv, plugin imax is in force units (divide by ki), slewmax carries over; the single ctrl becomes input="pos".
PiperOrigin-RevId: 957588898
Change-Id: Id2786836ca6e76f58e5b5cc8323fc23be0a53784
https://youtu.be/17XpwnqyCXs
New transmission type mjTRN_SO3: a relative orientation, targeting a ball
joint or a site+refsite pair. It is the first transmission with more than
one force output: its length is the norm of the expmap vector of the
relative rotation and its moment axes are the 3 rows of the
relative rotational Jacobian, without projecting onto per-actuator gears.
New force law mjGAIN_SO3/mjBIAS_SO3: a geodesic PD servo, force =
kp * log(q_current^-1 * q_target) - kv * velocity, exact for arbitrary axis
combinations with a unique equilibrium at every commanded orientation.
Error, moment rows and velocity all live in the child frame (joint or
site): the right-difference error is the gradient of the geodesic
potential in that frame. The parent-frame (left) error is not: driving
child-frame torques with it pumps energy at large angles, settling into
steady-spinning limit cycles (the SO3LargeAngleConvergence test). The
integrator variant stores the 3D orientation setpoint in act (actnum = 3,
re-anchored to a bounded representative at integration time). Exposed in
MJCF as <orientation joint=|site=+refsite= kp kv|dampratio>, or via
<general gaintype="so3" biastype="so3">.
The setpoint input has two charts: an expmap target (3 controls, default)
or a quaternion target (4 controls) -- <orientation input="quat">, the
first actuator with different input and output widths. The signature is
recorded in a new per-actuator field actuator_ctrlspec (mjtCtrlChart),
whose meaning is scoped by the gain type the way gain/bias parameters are;
ctrlnum is derived from it at compile time and remains the layout
authority. An explicit field rather than width inference or a prm slot:
width-as-chart cannot express same-width signatures (upcoming servo input
subsets), and prm slots are the input_mode pattern this stack retires.
The force law normalizes the commanded quaternion, making it scale- and
antipodally-invariant. The all-zero ctrl still maps to the identity via
mju_normalize4, but it is a degenerate point (a nudge of any component
commands a half-turn), so quat inputs reset to the identity quaternion:
new mj_resetCtrl sets neutral ctrl values (zero, except qw = 1), called
by mj_resetData and the viewers' Clear All. The quat chart is
restricted to dyntype 'none': integrating a quaternion setpoint linearly
is not meaningful on the manifold. New mjsActuator.ctrlspec field carries
the signature through the spec and XML round-trip.
Actuator sensors (actuatorpos/vel/frc) now report one value per force
output; dim = 3 on an SO3 actuator.
As the first actuator with nu != nactuator, this commit also makes the
viewers multi-input aware: the control sliders in simulate and studio,
which indexed per-actuator arrays by control index (out of bounds on
this model class), are generated per control and labeled with the
actuator name plus an input suffix ("orient/qw"), via the new
introspection helper mj_actuatorInputName -- the single source of truth
for input names, extended by each new multi-input type (quaternion
components are w-first: qw, qx, qy, qz). Slider ranges now honor a
defined ctrlrange even when ctrllimited is false: range is the UI hint,
limited is the clamp -- wrapped and expmap setpoints are unbounded but
still want finite sliders, while quat components are truly bounded.
The rotational demo model is orientation.xml under
test/engine/testdata/actuation/, upgraded to a three-way contrast:
per-axis wrapped servos vs an expmap-commanded vs a quat-commanded
orientation actuator, on identical checker-textured boxes. It is loaded
by the mixed-axis contrast and input-name tests, and doubles as the
viewer test model (slider groups of 3 independent, 3 grouped, 4 grouped).
PiperOrigin-RevId: 951607063
Change-Id: If235dba8e2f2ca72672e7c62531a27e967c6a373
For example when loading parent_merge.xml:
```
WARNING: Attach conflict when attaching 'child' to 'parent_merge', policy is 'merge'
timestep: parent has 0.005, child has 0.002, taking the minimum
iterations: parent has 50, child has 100, taking the maximum
flag 'Damper': added from child
```
When loading parent_error.xml:
```
XML Error: Attach conflict when attaching 'child' to 'parent_error', policy is 'error'
timestep: parent has 0.005, child has 0.002
iterations: parent has 50, child has 100
Element 'attach', line 10
```
PiperOrigin-RevId: 933620810
Change-Id: Ib477863b5ef763474d27fb4be5a4148be1d5d500
Compiler warnings are now accumulated in a vector of strings within the mjSpec object. New API functions `mjs_numWarnings` and `mjs_getWarning` are added to access these warnings. The compiler's log handler now chains warnings to the global log handler, ensuring they are still displayed immediately. Call sites in `mj_loadXML`, `mj_compile`, and the Python and WASM bindings have been updated to use the new warning API.
PiperOrigin-RevId: 933361650
Change-Id: I47cab98a460c57b0898c0a1a43fce2a5b9648eb1
Correct argument types for timeconst and range parameters in pybind11
python bindings from C arrays to std::array.
Fixes#3282, #3282, #3318
Thanks to @Abzaek for original PRs
PiperOrigin-RevId: 932423401
Change-Id: Ic30ba076913693f5c0e545789690e8b0fa444390
For example, `compile mujoco_menagerie/robotis_op3/scene.xml` now outputs
```
Compile 1 (cold cache):
total: 317.2 ms
assets: 284.8 ms (wall clock)
load: 616.1 ms
hull: 26.4 ms
poly: 137.8 ms
inert: 177.8 ms
bvh: 568.2 ms
octr: 1.6 ms
tex: 25.3 ms
other: 32.4 ms
Compile 2 (warm cache):
total: 79.9 ms
assets: 54.5 ms (wall clock)
load: 888.5 ms
hull: 0.0 ms
poly: 0.0 ms
inert: 0.0 ms
bvh: 0.0 ms
octr: 0.0 ms
tex: 21.4 ms
other: 25.3 ms
```
PiperOrigin-RevId: 917850214
Change-Id: Iaec86230bec0faf2e47820e20cbff61de5b2621e
This change disallows calling `mjs_delete` on an mjSpec that has been attached to another mjSpec via `mjs_attach`. Attempting to delete an element from an attached spec will now result in an error. The Python bindings for `mjSpec.delete` have been updated to raise a ValueError when this occurs.
PiperOrigin-RevId: 897266695
Change-Id: Ic0670125a3028191ec50eca890f02b5910ec8b03
This test verifies that geom.plugin and mesh.plugin are accessible and can be assigned a plugin instance.
PiperOrigin-RevId: 888576511
Change-Id: Id17885de5fdf1f4543ac195a8b04bb01139d1bfa
This allows setting attributes with bind using a list of mjSpec objects as arguments.
PiperOrigin-RevId: 825456920
Change-Id: Ie6af956feab0a805175d7aaecf26e071401fbf05
The user can recover the old behavior by passing prefix="".
This enables to attach children with default and save a valid result to XML.
PiperOrigin-RevId: 825011185
Change-Id: Id20c2589da928bf92b77bdb01cfba73dfc1d2f52
This extends both the spec and the XML definition to allow specification of a material name on a mesh. This material acts as a fallback in the case that the referencing geom element does not specify a material of it's own.
PiperOrigin-RevId: 798232378
Change-Id: Iaf300c727732744ea1b613e64334ee505ac6e209
Yuval Tassa