- Also change signatures of `mju_fill` and `mju_symmetrize` to conform to standard.
PiperOrigin-RevId: 485613824
Change-Id: I8dd618bac92ef40aa6c76380fa73302e81968687
If given two non-decreasing values, `springlength` specifies a deadband for spring stiffness, inside of which the force is 0 and outside of which force behaves like a regular spring, with the setpoint corresponding to the nearest value. This can be used to create tendons whose limits are enforced by springs rather than constraints, which are cheaper and easier to analyse. See test/engine/testdata/tendon_springlength.xml example model.
Spring-limited spatial tendons whose lower range value is 0 are rendered as catenaries.
Fixes#520.
PiperOrigin-RevId: 484509706
Change-Id: I6698e94ee36168f52d501e83057559805e05172d
- `gain` was not inherited, either from `<adhesion gain>` default or from `<general gainprm>` default.
- `dyntype` was not inherited from `<general dyntype>` default.
- Reported by @vaxenburg.
PiperOrigin-RevId: 480707156
Change-Id: I0160531d48186e7658952e72923ceb6cb034be9b
- Added new `cable` composite type:
* The `initial` parameter specifies the joint at the starting boundary: `free`, `ball`, or `none`.
* The boundary bodies are exposed with the names:`B_left` and `B_right`.
* The vertex initial positions can be specified directly in the XML with the parameter `vertex`.
* The orientation of the body frame **is** the orientation of the material frame of the curve.
- Added new `cable` passive force plugin:
* Twist and bending stiffness can be set separately with the parameters `twist` and `bend`.
* The stress-free configuration can be set to be the initial one or flat with the flag `flat`.
* New cable example showing the formation of plectoneme.
* New coil example.
* New belt example showing interaction between twist and anisotropy.
* Added test using cantilever exact solution.
PiperOrigin-RevId: 480033694
Change-Id: I491271bce8fccb185961477e903e5a72d172c8a3
These were inadvertently renamed to XMLReaderTest by an overzealous auto-renamer in 58fd72f53d.
PiperOrigin-RevId: 479520906
Change-Id: Ia50ec659f21a92cbcd4b953cde54dd98f0adb67a
- Add private function `mj_arenaAlloc`. This is used internally to allocate memory from the arena.
- Add private function `mj_nefc` to count constraints. This function returns a tight upper bound on `d->nefc`. The number of counted constraints can be slightly bigger than exact `d->nefc` in the case of constraints with empty Jacobian, as when placing a frictional tendon between two world sites.
- Add new `memory` attribute to the `size` XML element for specification of arena memory size. This attribute is mutually exclusive with `nstack` and `njmax` specifications, which are now deprecated (but left around for the time being for legacy compatibility).
- Move `d->stack` to the end of the new arena space. The stack now grows in reverse from the end.
PiperOrigin-RevId: 479341539
Change-Id: Ie019c202e0908577ffc6f833a37920858116f667
- Before this change, an asymmetric Hessian would lead to solver failure. After this change the Hessian is symmetric by definition (upper triangle is ignored).
- API documentation was updated to reflect this contract.
PiperOrigin-RevId: 477135411
Change-Id: I60d011d36853afebac26c359771c217baf101360
- Adhesion actuator defaults were not parsed, now fixed.
- Both damper and adhesion actuators were requiring `ctrlrange` at parse time, which prevented this attribute from being inherited from defaults, now fixed.
- Added tests for all 3 cases.
PiperOrigin-RevId: 475145255
Change-Id: I8dd6196e20734136d990f522893ebd4d156cd7a8
The use of __attribute__((constructor)) made the previous commit fail to build in MSVC.
PiperOrigin-RevId: 474891117
Change-Id: I86a71bb8f3226ee49a8b5e8c07adc613623042b3
This is an amendment to 4bfc2c0311.
Add an autolimits compiler option. When true, *limited will be inferred from the presence of the *range attributes.
When false, models where limited is not specified, and range is will fail to compile.
PiperOrigin-RevId: 472438650
Change-Id: I489098e879ee695030f44e0d8cd969787e75fb90
- Added `refsite` attribute to actuators with `site` transmission.
- Such actuators now have a well defined length and can be used for e.g., Cartesian end-effector control.
- Added example models and documentation describing the new feature.
PiperOrigin-RevId: 471561218
Change-Id: I538f09af9600d5c53992c4a9fed325648aab4fa3
- `anchor` determines the point of wrench application, in the frame of body2.
- `tfratio` scales applied torques relative to applied forces.
- Add visualisation of both anchor points to both weld and connect constraints.
- Add a test model showing how the new weld parameters behave.
PiperOrigin-RevId: 470021901
Change-Id: I3faba0e5dcab2e29ee81096f5ff71ff66d99758c
- `anchor` determines the point of wrench application, in the frame of body2.
- `tfratio` scales applied torques relative to applied forces.
- Add visualisation of both anchor points to both weld and connect constraints.
- Add a test model showing how the new weld parameters behave.
PiperOrigin-RevId: 469228149
Change-Id: I836b0791f10fb624607a12ef3c687da991c21789
- `anchor` determines the point of wrench application, in the frame of body2.
- `tfratio` scales applied torques relative to applied forces.
- Add visualisation of both anchor points to both weld and connect constraints.
- Add a test model showing how the new weld parameters behave.
PiperOrigin-RevId: 469190483
Change-Id: I20f6da85b09cd2c4c0b5d29eb8003eabb524e55e
- `distance` constraints were not very useful and increased the contact buffer within the constraint solver, violating a core design principle. Therefore they have been removed.
- The enum value `mjEQ_DISTANCE` is retained, but errors will be thrown in the parser and engine if these constraints are selected.
PiperOrigin-RevId: 467050101
Change-Id: Ie72a07e4fe338eea5107004a9fc0f5e47eb0c3b7
The MSVC build on GH Actions doesn't detect overflows in mjData or mjModel sizes, so use a negative size instead to trigger an intentional failure in the test.
PiperOrigin-RevId: 465529615
Change-Id: Ic7f15eed782cdda11b29984b136ed4f625418cc8
While creating an mjData, any error triggers mj_deleteData. If buffer or stack is not NULL at that point, an uninitialized pointer will be freed.
PiperOrigin-RevId: 465378329
Change-Id: I9be0eef0648e05e3e5f1361da346a5046485cde7
- Adhesion actuators using contact normals as force transmission mechanism.
- Related video: https://youtu.be/HdBue4MUZysCloses#229
PiperOrigin-RevId: 464389367
Change-Id: I9f69b3cd152d957e8f65870d208788463c036a6d
- Mesh inertias can now be computed exactly for well-formed (no holes) non-convex meshes.
- To activate this feature, set `<compiler exactmeshinertia="true">` (defaults to `false`). This default may change in the future.
- Added `<geom shellinertia="true/false">` (defaults to `false`). When true, geom inertia is computed assuming all the mass is concentrated on the surface, and `density` is interpreted as surface density (mass/area). Currently only mesh geoms are supported.
PiperOrigin-RevId: 464368395
Change-Id: I17afd99b9b221c9d24ae951f6e63d5c61ff89820
Yuval Tassa