4683 Commits

Author SHA1 Message Date
bherbruck df4f9d3529 Inspect menu: Component Colors is a normal on/off item with a check mark (#11854)
* Inspect menu: Component Colors is a normal on/off item

The Component Colors entry in Inspect > Check was labelled "Enable Component Colors" and
swapped to "Disable Component Colors" with a different icon while on. It is now labelled
"Component Colors" in both states, keeps one icon, and shows a check mark when on, like Draft
Analysis and the other toggles beside it. The command id and parameters are unchanged.

The now-unused "disable" strings and the colored_components_off icon are removed. Other
languages' old "Enable ..." wording is dropped so they fall back to English until retranslated.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Keep the Component Colors label in the fully translated catalogs

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Checkable menu rows tell screen readers whether they are on

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Georgian: Component Colors loses its Enable/Disable wording

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 20:12:36 +00:00
takuto-NA ef2f485e15 Extend viewport AO to the existing virtual ground (#3413) (#11979)
* claim: #3413

* feat(gpu): extend viewport AO to the virtual ground

* test(gpu): retain measured AO render attachments

* perf: initialize ground AO pipeline with concurrent jobs

* fix(gpu): size ground AO receiver for the current frame radius

* fix(viewport): retain orbit caches when ground AO visibility changes
2026-11-04 19:42:01 +00:00
github-actions[bot] a43cd99e55 Regenerate generated files and fold pending files [skip ci] 2026-11-04 21:11:47 +00:00
github-actions[bot] 8f26457487 Regenerate generated files and fold pending files [skip ci] 2026-11-04 21:01:46 +00:00
sascha2101 07ef94e102 Hole: drill only the shown bodies when no target is picked (#7520) (#7562)
* claim: #7520

* Hole: drill only the shown bodies when no target is picked (#7520)

A Hole that names no bodies drilled every body in its path, hidden ones
too, and its dialog preview replaced the hidden bodies with drilled ones.
Like a cut (#3961), it now takes the shown bodies of the active component
as its participants while some are hidden, stored so showing the others
later changes nothing. With nothing hidden, or everything, it still drills
every body.

Its face points are named on the bodies it drills first, so a hidden
body's face in the same plane no longer takes the picked face's name.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FN5eEMrqWWXqi65FcK8GXq

* Hole: drill the picked body though it is hidden (#7520)

Review on #7562: with the picked face's body hidden (picked through Select
Other, or hidden while the dialog is open), the shown-bodies default left it
out, so the hole drilled only shown bodies further along, or nothing, without
a message. The body whose face holds the hole's position now joins the shown
ones, unless a shown body has a face there too (a face shared by a shown and
a hidden body is the shown one's, as a pick in the view takes it).

The test also covers editing a hole made with nothing hidden while a body it
drills is hidden: timeline.redefine stores participants only when the edit
passes them, so the hole keeps its empty scope and the hidden body its bore.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EMbqRqYimvY26QzcvrojSC

* Hole: test that a hole made with a body hidden replays the same (#7520)

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Hole: follow the face-name lookup now returning a Result (#7520)

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Hole: tests follow main's Vec3 and world_state (#7520)

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Hole: format (#7520)

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Hole: with every body hidden, drill them all as before (#7520)

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: sascha2101 <221609842+sascha2101@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-11-04 19:19:18 +00:00
semmelrinde 02f276e296 Report a bug: limit answers by characters and show the room left (#7191) (#7196)
* claim: #7191

* Report a bug: limit answers by characters and show the room left (#7191)

The answers were cut to 2,000 bytes, silently: 666 characters of
Chinese or Japanese. They now keep 2,000 characters, as the text field's
own limit counts them, in the form, in the report and in a crash draft.
Under 200 characters left, an answer says how many there are. The
report's budget grows so three full answers in any script still fit
beside the technical details.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Report a bug: leave the crash draft's description as it was

It is the app's own English text, well under the limit in bytes as in
characters; leaving the line alone keeps it apart from #7189's change.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Locales: Arabic and Hebrew for the new strings

ar and he are complete catalogs on main now (#3458): every new message
needs them. The pending-messages test compares right-to-left messages in
display order once #7532 lands (#7527).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Locales: Vietnamese for the new strings

Vietnamese became a complete catalog on main (#5823), so every new English
message needs it too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 19:15:23 +00:00
austin62jake 9602587b0d Navigation: a middle or right drag keeps the mode it started with (#9557) (#9592)
* Claim #9557

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Navigation: a middle or right drag keeps the mode it started with (#9557)

The mode of a middle or right drag was worked out again from the keys
held on every frame, so letting go of Shift partway through a Fusion
Shift+middle orbit turned the rest of the drag into a pan. It is now taken
when the drag starts and kept until its button is released, as a left
drag with the mapping's keys already was. Preferences > Navigation > "A
drag keeps the navigation it started with" (on) turns it off.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-11-04 19:14:40 +00:00
github-actions[bot] f8a98eed33 Regenerate generated files and fold pending files [skip ci] 2026-11-04 19:59:52 +00:00
github-actions[bot] 7629421375 Regenerate generated files and fold pending files [skip ci] 2026-11-04 19:48:22 +00:00
Homero Thompson d034633265 Desktop: the file chooser says when it is not the desktop's own (#10618)
* test: the file chooser says when it is not the desktop's own (#10159)

rfd falls back to zenity in silence when the XDG portal is not there, and the
user gets a foreign window with no explanation. The host must be able to say so.

RED: the test fails with 'without a D-Bus session bus the file chooser is not the
desktop's own: the user has to be told'.

* fix: say when the file chooser is not the desktop's own (#10159)

rfd opens the file chooser through the XDG desktop portal; without the portal it
falls back to zenity, a window that does not belong to the app, and the app never
says so. The user gets a foreign window and no explanation.

The host now asks the session bus, on a thread of its own, whether the portal is
there, and keeps the answer. When a file is opened and the chooser is not the
desktop's own, the reason goes to the session log (Help > Messages), which is
where a user looks for it.

* fix: the file chooser messages read as notices, not assertions (#10159)

The maintainer asked for two things on the pull request: the strings of the
pending catalogue read like a test assertion ("the user has to be told...")
rather than a notice a person would see, and the doc comment above
desktop_chooser_fallback was there twice.

The three reasons are now plain messages, in every locale of the file: they
say what the chooser is and why, and stop there. The doc comment of the
function is now the only one, and it says what it did.
2026-11-04 19:12:58 +00:00
Yishin Li fc51df3b01 cadmpeg 0.6.7: FreeCAD placements, sphere faces and closed shells come in right (#10382)
Only the version moves: SolidCraft builds against 0.6.7 unchanged. 0.6.7 applies App::Part
and link placements once, writes a sphere's seam ring as a valid loop, and indexes the
lookups that made large assemblies slow to decode. Two real FreeCAD documents that 0.6.3
refused as invalid open with it.


Claude-Session: https://claude.ai/code/session_01MvsHJx9gzG4447TABcpZFo

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 19:01:59 +00:00
austin62jake 8f4d7959df Agents and scripts: Parameter Sweep describes its exact parameters and reply (#10977) (#10978)
* claim: #10977

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Parameter Sweep: input and output schemas (#10977)

inspect.parameter_sweep gets a typed contract and reply types in
schema/parameter_sweep.rs and leaves unconverted.txt. Each key reads as
the handler reads it, with its message; the reply is built from
ParameterSweep and its item types, with the same JSON as before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Parameter Sweep schema: a missing parameter reaches the handler's message

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* parameter_sweep schema: do not publish a null default on the required parameter

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-11-04 19:00:58 +00:00
Tury991 338fa197d3 Dimension text: round values to a step (#4896) (#11380)
* claim: #4896

* feat(doc): support dimension text rounding steps (#4896)
2026-11-04 19:00:07 +00:00
SS-EN 727bb23c7e Section Analysis: a body standing on another keeps its own cap, also in CPU pictures (#4622)
Where one body stands on another (a post on a plate), the post's bottom,
seen through the cut, and the plate's top are the same plane. In the CPU
rasterizer (headless pictures without a GPU) the plate's top won that
depth tie and showed through the post's cut. The cut now wins a tie by a
few f32 steps (DEPTH_EPS).

The viewport already draws this right since #6363 and #6728; a GPU
regression test now covers it, both creation orders, orthographic and
perspective, with both depth formats.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 18:52:15 +00:00
CarelT 8d6c45f640 UI kit: one shared needs-attention mark, used by the agent chat's badge (no behaviour change) (#5424)
* UI kit: one shared needs-attention mark, used by the agent chat's badge

The agent chat's "waiting" badge becomes `ui_kit::attention_mark` (a count, or
a plain dot) in `ui_kit/attention.rs`, so other things that wait for the user
(linked designs that changed, #5354) share one mark. The count is drawn
exactly as before. No change in behaviour.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* UI kit: sort the attention re-export

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* ui_kit attention mark: take the corner inset from Tokens::space_3

The inset came from the agent chat panel as plain numbers, which font_sizes_and_dense_form_metrics_come_from_tokens refuses outside theme::Tokens (review on #5424). space_3 is 3.0, so nothing moves.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Carel Theron <careltheron@Carels-MacBook-Pro.local>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-11-04 18:52:05 +00:00
Jackson Oursland 6d16fae4ed Render preview: extract the product scene only when what it shows changes (#7465)
The live product preview's signature included the session revision, which
every command moves: a selection click extracted every body and built every
product vertex again (118 ms on a 200-body assembly) before the key comparison
skipped the upload. The signature is now the document and world state (held,
so their addresses are not reused) and every input of body visibility,
including hidden folders and the active sketch.

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-11-04 18:51:42 +00:00
semmelrinde ef92f35b16 Sketch drag: a step solved ahead that solves becomes the sketch, one step per core (#7648) (#7649)
Past a failed step a scripted drag solves the next steps at once and takes
those that fail in a row as tried; the first that solved was then solved
again by the walk. It now becomes the sketch from its solved copy, so no
step is solved twice. A batch holds one step per core (at most 8), and on
one core or in the browser build, where a batch would run its steps one
after another, the walk solves the steps itself. The walk takes the same
steps with the same outcomes, so results and counted solves don't change.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 18:51:32 +00:00
kaltenbrunnermarkus 232a902680 Circular pattern: cutting many copies of a hole is faster (#9007) (#9038)
* claim: #9007

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Circular pattern: cut copies of a hole that lie apart in one go, and check missed copies cheaply (#9007)

The check for copies that remove no material intersected every copy with
the whole body; a point test along the hole's axis (and through the middle
of the copy's overlap with the body) now proves most copies take material
and only the rest are intersected. Copies the kernel's coarse box test
takes for meeting are measured on finer meshes and, when clearly apart,
joined with join_apart and cut once.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Format (#9007)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Look for a copy's material through the middle of each of its faces (#9007)

A tool of two pieces (two circles cut at once) turned by 45 degrees has the
middle of its box between the pieces; the lines along the axes through it
miss both, and the copy was intersected. The lines through the middle of
each face's box run along each cylinder's axis.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Circular pattern: cut copies that notch the same round face one by one (#9007)

Copies whose boxes only finer meshes show apart were cut in one go. When
several of them notch the same curved face of the target (grooves along a
bore), the result kept extra lines on that face: a revolved ring with 37
grooves came out in 184 faces instead of the 151 a one-by-one cut leaves,
at the same volume. Such copies are now cut in turn; copies that only
share flat faces (through holes in a tube wall) are still cut at once.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Circular pattern: tell copies apart and find copies that cut nothing on exact shapes (#9007)

The checks this pull request added decided on meshes, which `cargo xtask
mesh-decisions` now refuses. They decide on the exact shapes instead:

- Two tools whose boxes meet are apart when their union comes out in two
  pieces that share no face, edge or vertex (crossing, nested and touching
  tools do not).
- A copy takes material when a point along its axis, the axes of its round
  faces or the middle of the box it shares with a target is inside both, by
  exact point classification; only copies that test cannot place are
  intersected.
- Copies that notch the same round face are no longer cut one by one: cut
  in one go they now leave the same faces as one by one (a revolved bore
  with 37 grooves: 80 faces either way, as on main).

The test of copies that come close now uses 8.5 mm, where they overlap; at
9 mm they are 0.012 mm apart and are cut in one go.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 18:42:02 +00:00
PaddleStroke cfc4908291 Sheet metal: returns on a notched tray now close at the convex corner (#8823) (#9714)
* claim: #8823

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sheet metal: returns on a notched tray close at the corner away from the notch (#8823)

Closing two returns at a corner was refused when either return already lay
over another flange in the flat pattern, even far from that corner. On a tray
with a notch, the walls on either side of the notch's inner corner both unfold
into the notch, so the return on one of them lies over the other there; the
return's opposite convex corner was then left open ("closed, the flanges would
overlap in the flat pattern") and the two returns ran through each other.

A closure is now refused only when it makes the two returns overlap or adds to
what either already shares with another flange in the flat.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 18:41:07 +00:00
froglemonade2 1432131e95 English: command labels in title case, other labels in sentence case (#9085) (#10734)
* English: command labels in title case, other labels in sentence case (#9085)

The rest of #9085 after #9194 (the plural and the spelling) and #9907
(the Preferences page names). Command labels are in title case (422 of
430 were already); the seven in sentence case follow, and Fix/UnFix
reads Fix/Unfix. The UI text skill states the rule. The user docs name
the Preferences footer's button by its current label, Restore page
defaults (#10295).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Navigation bar menu test: the echo names the command by its own label

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* UI text skill: state the case rule in one short sentence, under the 3600 limit

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Localization doc: the case rule in full, with examples

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Localization doc: the example button is Restore page defaults now

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 18:39:52 +00:00
CaRLymx 35bc04847a Spanish (es-ES): catch up with en.json (2026-11-04) (#10895)
* i18n: make engine errors translatable

Engine errors (`EngineError::BadParams` and the offset/path errors the kernel
returns) were shown in English regardless of the active locale.

- Add `tr_engine_error`, which maps the known messages to `sketch.error.*`
  keys and returns anything unknown unchanged.
- Normalise the `invalid parameters for `<command>`: ` prefix before matching,
  and interpolate the offset id into the translated message.
- Route `friendly_error` through `tr_engine_error`.
- Avoid redundant status writes in `run_points`/`run_entities`.
- Ship the es-ES pending strings for the sketch tool hints.

* Spanish (es-ES): catch up with en.json

Translate the 734 messages `es.json` was missing and fix `ui.project`
("Proyecto" → "Proyectar", the action behind the sketch project tool).

The catalogue now matches `en.json` key for key (5,591 entries), keeps every
placeholder intact and stays alphabetically sorted. That includes the 61
messages added upstream since the last catch-up (92a9a5e0).

Terminology: "Turntable" → «Plato giratorio», "hover" → «pasar el puntero»,
"card" → «tarjeta».

* i18n: attribute the sketch hints and keep the offset error neutral

The pending sketch hints file adds an asset, so it gets its own row under
attribution/pending rather than editing ATTRIBUTION.md.

The engine reuses the offset-ends error for trim, extend and break, so the
message no longer tells the user to trim: it asks them to edit the source
curves instead.

* i18n: translate shortcut-started tool hints and fix the break message

Shortcuts are handled in logic(), before ui() installs the language scope, so a
tool started by its key stored the English hint even with another language
selected. Install the scope for the whole frame.

The engine has nothing to break, so say so: "nothing to break here".

* i18n: scope a tool start so its hint uses the app language

A direct start can run outside the frame scope (and a shortcut runs in logic),
so the hint was built with the thread default. Open the scope where the tool
starts.

* Spanish (es-ES): translate the 30 new messages

The blur preferences, the dimension step settings and the fillet turn modes
arrived upstream after the last catch-up.

* i18n: scope command errors and use US spelling in the hints

The native menu runs Undo and Redo before the frame scope exists, so an error
from them was translated in the thread default language.

The pending hints mixed British spellings into the English source; the English
catalog is US-spelled, so the fallbacks say center and en-GB keeps centre.
2026-11-04 18:39:43 +00:00
Mateusz Sych 06def2231d Agent chat: tell the agent the design changed by hand since its last reply (#10854) (#11144)
* claim: #10854

* Agent chat: tell the agent the design changed by hand since its last reply (#10854)

The chat remembers the design as the agent last saw it, at the end of a
turn it answered or worked in. When the next message goes and the design
is no longer that one, a note goes before the message for the agent (not
into the conversation, like the note after an interruption): the user
changed the design by hand, which parameters changed from what to what,
which features are new, edited or removed, where the History marker went,
and to read the design again before reusing positions, picks or sizes.

A new chat and a stopped backend forget it, so a session that has seen
nothing gets no note. Each list names at most 12 items and counts the
rest; names and expressions are cut at 60 characters.

* Agent chat docs: the design-changed note asks the agent to read the design again (#10854)

---------

Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
2026-11-04 18:39:09 +00:00
PaddleStroke d39fd6c397 Assistant: discover Mistral Vibe and offer sign-in (#11692) (#11704)
* claim: #11692

* Assistant: discover Mistral Vibe and support its sign-in (#11692)
2026-11-04 18:38:05 +00:00
Brett Lawson 4faf63e48a Loft: profiles picked one after another in one sketch are one section (#11720) (#11906)
* Loft: profiles picked one after another in one sketch are one section (#11720)

The Loft dialog made every picked profile its own section, so two picks in
one sketch (both halves of a split outline, say) became two sections in one
plane and the loft was refused. Consecutive picks in one sketch now form one
section {sketch, profiles: [...]}; a later return to that sketch is still a
section of its own, so the there-and-back loft of #8221 is unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz

* Loft: an unchanged edit keeps a section of all profiles "all" (#11720)

An edit loads a section of "all" as each profile of its sketch; now that
those picks make one section, OK saved them as indices. Indices fill a
letter's counters that "all" keeps as holes, so a later rebuild could
change the loft. Like Extrude, Revolve and Emboss, a section that was
"all" stays "all" while the picks are unchanged and cover every profile.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 18:37:41 +00:00
takuto-NA 91ecea8cfd Properties: account for sheet perforations (#6025) (#6028)
* claim: #6025

* fix(engine): account for sheet perforations in physical properties

* fix(inspect): retain kernel topology counts for sheet bodies
2026-11-04 18:30:31 +00:00
PaddleStroke c8c0c28fc8 Point clouds: keep every PTS point within the import limit (#11093) (#11717)
* claim: #11093

* Point clouds: count point rows before thinning PTS imports

* Point clouds: exclude invalid coordinates from text sampling
2026-11-04 18:27:21 +00:00
PaddleStroke f91db06904 Sketch Project: links to old numbered faces can be recovered (#11666) (#11707)
* claim: #11666

* Sketch: recover legacy references on original whole faces
2026-11-04 18:24:02 +00:00
Andrzej Błasik 9df9d1fbdc fix(smlib): NURBS weights compare within rounding of the coordinates' size (#11974)
same_nurbs compared the weights of a face's NURBS form and the rebuilt
analytic surface's NURBS within an absolute 1e-12. A weight is found from
the control points, so its rounding grows with the coordinates: 3.8e-12 at
coordinates of about 320 on a cone. The face was refused with "a NURBS form
that is not its analytic surface". Weights now compare within
1e-12 * max(1, |coordinates|), as same_nurbs_curve already does for points.
2026-11-04 18:23:53 +00:00
rugbymauri 8068e8f4b8 Preferences: the theme strip's arrows page by a screenful of themes (#11434) (#11600)
* claim: #11434

Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>

* Preferences: the theme arrows move by the themes that fit in view

The previous and next arrows beside the theme cards in Preferences >
Appearance moved the row by one card per click, although their hover
text says "Previous themes" and "Next themes". With 26 themes and about
six cards in view, reaching the last theme took some twenty clicks.

The shared carousel now moves by the number of cards that fit at the
current width, so one click shows the next screenful. The last page
ends on the last card, the first page starts on the first, and the
arrow at an end stays dimmed and inert. The step follows the window
width, and the row still opens on the chosen theme.

Fixes #11434

Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>

---------

Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
2026-11-04 18:21:39 +00:00
PaddleStroke 863b0777da Sketch: dragging a constrained line by its middle no longer stalls (#11696) (#11714)
* claim: #11696

* Sketch: move constrained lines that stall during dragging
2026-11-04 18:19:46 +00:00
austin62jake 80889762ce Agents and scripts: Configure, Configuration Column, Row and Rule describe their exact parameters and reply (#11895) (#11896)
* claim: #11895

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Configuration table: input and output schemas for Configure, Configuration Column, Row and Rule (#11895)

describe_command now gives the exact parameters and reply of the four
commands that change a design's configuration table, and the warn and
strict parameter checks use them. The handlers read their parameters
from the raw JSON, so the new contracts in schema/config.rs read each
key as its handler does, with its message: lists of names as
params::string_list (whose json_brief and MAX_STRING_LIST become
pub(crate)), exactly one column target, faces picked or a face column's
key, a row's cells, and rules (whose schema describes them; the handler
keeps its own check). What only the design can answer stays the
handler's. All four reply with ConfigTableReply, as config.table does.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-11-04 18:19:35 +00:00
rugbymauri a3f293c987 Error messages: an out-of-range value names the field that is wrong (#9625) (#9684)
* claim: #9625

Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>

* Name the value at fault when a hole, sheet rule, joint or extrude is refused (#9625)

Several refusals were right but named a check the input had passed, so
the user changed the wrong field:

- solid.hole: an unknown `fit` was reported as an unknown bolt size; it
  now says the fit must be close, normal or loose. A countersink angle
  out of range was reported as a countersink too narrow; the angle and
  the width are now checked apart. A `diameter` number out of range was
  reported as missing; it now gives the range, as other parameters do.
- Sheet rules: a thickness of 10000 mm or more said "must be positive";
  it now gives both limits. The K-factor and the bend radius are named
  on their own, and the message no longer implies a radius of 0 is
  refused.
- joint.drive: a number out of range said "numbers or expressions"; it
  now gives the range.
- Extrude: a distance past the kernel's limit said `end = 1000000000`;
  it now says the extrusion is too long and gives the limit.

Fixes #9625

Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>

* Refuse a too-long extrusion before the kernel and match the countersink floor (#9625)

The kernel is paused, and its `finite()` check also guards a revolve's
angle and a cylinder's and a torus's sizes, so its message must not say
"extrusion". crates/kernel is back as it was; the doc evaluator now
refuses an extrude (plain, tapered, or redefined from the Edit Extrude
dialog) whose end lies 10000000 mm or more from the sketch plane,
mirroring the kernel's limit, and says so. A cylinder of radius 2e7
keeps the kernel's own message.

The countersink check refused 0.1° while the message said "more than
0°". The floor stays (the cone grows as 1 / tan of the half angle) and
the message now names it: more than 0.115°.

Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>

---------

Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
2026-11-04 18:18:14 +00:00
PaddleStroke e27d17c421 Assistant: offer the Mistral AI endpoint in Add Agent (#11246) (#11715)
* claim: #11246

* Assistant: offer the Mistral AI API endpoint (#11246)
2026-11-04 18:16:34 +00:00
github-actions[bot] 52bc27aaf6 Regenerate generated files and fold pending files [skip ci] 2026-11-04 18:48:25 +00:00
github-actions[bot] c357b1565e Regenerate generated files and fold pending files [skip ci] 2026-11-04 18:40:09 +00:00
cronos de9a2bc846 Shaded with hidden edges: optionally select edges through faces (#11841)
* Allow optional hidden-edge picking in Shaded with hidden edges

Keep visible-only picking as the default. Cover the preference, hover cache,
section and body visibility, and Fillet inputs in the existing UI tests.
Use platform-absolute fixture paths in the Windows CI argument-parser test.

* Respect section caps and visible-edge ties in hidden-edge picking

* Keep section caps as occluders behind nearer kept faces
2026-11-04 18:13:40 +00:00
Mateusz Sych 6b6bd26648 Agent chat: a prompt's bubble is as tall as its message (#11882) (#11883)
* claim: #11882

* Agent chat: a prompt's bubble is as tall as its message (#11882)

The prompt's Copy message row (#10741) was laid out right to left and centred
across its height. egui gives such a row all the height left in the
conversation's view, so a prompt near the top of a conversation stretched
down over the empty view, with Copy message floating in the middle. The row
is top-aligned now.

* Agent chat: keep the test's harness bound (#11882)

---------

Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
2026-11-04 18:13:19 +00:00
ABDULLAH 8239b914ba Arabic: rim term in the Lip help, Up/Down keys in the dimension step preferences, frame-rate note (#11870)
* Arabic: rim term and the shell-first step in the Lip help

* Arabic: Up/Down keys in the dimension step preferences, frame-rate note matches the English
2026-11-04 18:12:49 +00:00
Janiz-zzz e95946ac82 i18n(fi): translate the 822 messages Finnish lacks (#12036)
Added as assets/locales/pending/finnish-catch-up-2026-11.json so it
folds after merge: help texts, the redesigned Preferences (sketch,
navigation, dimension values, panel blur), fillet corner, setback and
turn options, threads, import report, browser and viewport messages.
cargo xtask i18n lists nothing missing for fi.

Co-authored-by: Janiz-zzz <267742026+Janiz-zzz@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 18:11:29 +00:00
cronos 46ce12b7f0 perf(ui): reuse assembly rendering caches during orbit (#2889) 2026-11-04 18:06:34 +00:00
austin62jake aba00427fa Render shots: input and output schemas for Duplicate, Rename and Remove (#11450) (#11451)
The handler's strict parameter type moves to schema/render_shots.rs as
ShotParams, with descriptions and JsonSchema, and becomes the contract of all
three commands; the handler reads the same type. It builds ShotChange instead
of a json! literal, and takes its operation as a ShotOperation enum.

Co-authored-by: Claude <noreply@anthropic.com>
2026-11-04 18:02:53 +00:00
alfonsotames cccf8c1ece Snap points: a flat face offers its corners, edge middles and every hole's centre (#11476) (#11477)
* Snap points: a flat face offers its corners, edge middles and every hole's centre (#11476)

A flat face now offers its whole outline as snap points, read from the
exact faces and edges: every corner, the middle of every straight edge
and the centre of every round edge, holes included, as well as the centre
of its area. Corners on a closed circle's seam, or where the kernel split
one circle into pieces, are left out.

snap_points_from gives each point with where it came from (SnapSource):
the face it was picked on, the face's outward normal and a point inside
its edge, so a tool can keep the point by name (joint.create's edge,
corner and on) and turn a frame to the face. SnapPoint itself does not
change, so code that builds one keeps compiling.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Snap points: a round face's end centres say which way their end faces (#11476)

The centres at a cylinder's or cone's two ends now carry a normal in their
SnapSource: the axis pointing out of that end, which is the normal of the
face a hole opens onto or of a pin's end. A joint origin taken from one can
then lie on that face, as the centres a flat face offers already do.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Snap points: a hole centred on its face keeps its own point and rim (#11476)

Snap points were one point when they lay at one place, whatever their kind,
so a hole centred on its face was lost behind the face's centre, and with it
the rim its point keeps. Now only points of one kind are merged: the face's
centre and the hole's centre both stay, and only the hole's has its rim.

SnapSource::normal's doc now says it is also the axis out of a cylinder's or
cone's end.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Snap points: a washer's two rims keep a centre each (#11476)

Centres at one place are one point only when they are on one circle: the
inner and outer rims of a washer face now keep a centre each, with its own
rim, while the pieces the kernel split one circle into are still one point.

SnapSource::normal's doc now says that at a round face's end it is the
axis out of that end of the face, which at a blind hole's bottom points
into the material below, not out of it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Snap points: rims are told apart by their radii's size, not their place (#11476)

Two centres at one place were one circle when their rims' radii differed by
less than the place's tolerance, which grows with the distance from the
origin: 60 m out, rims of 4 and 4.05 counted as one and one lost its point.
The radii are now compared with a tolerance from the radii themselves.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Snap points: nearby points stay apart far from the origin (#11476)

Points of one kind at one place were merged within a tolerance of 1e-6 of
their distance from the origin, 0.06 mm at 60 m, so two small holes there
whose centres are 0.05 apart lost one centre. Places now use 1e-9 of that
distance (0.06 µm at 60 m): well above the rounding of coordinates and of a
circle fitted to an imported edge, so a point found twice is still one, and
far below any feature. The radii keep their own tolerance.

The merge is its own function, so its test can give it points directly.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Alfonso Tamés <mufufu@Mufufu-MacBook-Pro.local>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 18:02:44 +00:00
Jackson Oursland fb80454368 User guide: window tour gets a numbered screenshot and a navigation clip (#10323)
* Book: a numbered window screenshot and a navigation clip, from a capture script

The window tour now opens with a screenshot of the real window, its parts numbered in the
order the page describes them, and a short looping clip of orbit, pan, zoom and Home.

examples/demo/doc_shots.py makes both, and any later figure: each shot is a function that
starts a fresh app (its own settings) under Xvfb, drives it over the control channel with
the demo's Demo driver, and writes a still (numbered callouts, palette-optimised PNG) or an
H.264 clip (the drawn pointer of overlay.py, short button labels, idle cut by trim_idle.py)
into docs/book/src/media/. CONTRIBUTING.md says how to redo a figure when the UI changes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* doc_shots: clips keep a moment on each result; the window tour again on 0.29.0

trim_idle.py takes --hold S, the seconds of each idle stretch to keep (default 0.1, as before,
so the README demo is unchanged). The guide's clips keep 0.8 s, so a reader can see what each
step did before the next begins. The window screenshot and the navigation clip are made again
with it, on SolidCraft 0.29.0.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 17:33:39 +00:00
Dahak Builds f92e16fa25 Keep orbit gizmo drag tracking past the window edge (#9943) (#9978)
* Claim #9943: keep orbit gizmo drag tracking past the window edge

* Warp the orbit gizmo drag back to the window centre at the edge (#9943)

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-11-04 17:16:33 +00:00
Dahak Builds dcbedbd805 Don't blindly reopen a design that stopped the last session (#5064) (#10443)
A design that crashes or hangs the app while it is being reopened was
reopened blindly every launch, bricking the app each time. A launch that
reopens designs now marks them in the recovery folder; the marker is
cleared as each design finishes opening. A launch that finds the marker
left behind skips those designs once and says which one the last session
stopped on, so the app starts usable and the loop breaks.

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-11-04 17:16:15 +00:00
Dahak Builds 9bb216a357 Ribbon: only switch the tab when a command actually starts (#10540) (#10549)
* claim: #10540

* Ribbon: only switch the tab when a command actually starts (#10540)

select_command_tab ran before the command's own checks, so a command that
only reports a missing parameter or nothing to work on still moved the
ribbon. The ribbon now moves when the command starts and a refused command
puts the tab back, as a disabled command already never leaves it. View
display toggles and choices menus keep the ribbon's tab however they are
started, matching F6, the navigation bar and the view cube.

Written by Qwen.

* rustfmt (#10540)

Written by Qwen.

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-11-04 17:16:09 +00:00
github-actions[bot] fd9b3fd9f2 Regenerate generated files and fold pending files [skip ci] 2026-11-04 18:00:54 +00:00
Mateusz Sych 6488a540c9 Windows: a lost graphics device restarts the app instead of crashing (#10240) (#11109)
* claim: #10240

* Lost GPU: a loss met by a queue write restarts the app instead of crashing (#10240)

The per-frame probe (#6528) finds a device the driver reset before the
frame's uploads, but the driver resets a device at any moment: a reset
that lands after the probe is still met first by a queue write or the
present, and wgpu-core unwraps the driver's Lost there
(PendingWrites::activate) instead of losing the device. That panic
ended the app and wrote a crash report.

- egui-wgpu: the painter runs each frame under DeviceLost::survive. A
  panic the frame meets is taken for the loss once the probe then finds
  the device lost (the probe's path loses the device and runs its lost
  callback); the painter draws nothing more and the app restarts as for
  any lost device, keeping unsaved changes for recovery. Any other panic
  carries on unwinding.
- Crash reports: a panic inside wgpu-core that unwraps Lost is the
  device loss, not a bug, and is not reported. A command that meets it
  fails; the next frame's probe restarts the app.

---------

Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
2026-11-04 17:15:58 +00:00
froglemonade2 3e70ad9876 View navigator: right-click to choose Axes, Cube or a Custom body (#10266)
* View navigator: a custom body as the navigator, and a right-click menu to switch types

A right-click anywhere on the view navigator opens a menu with its three types: Axes, Cube and
Custom. Custom opens the Custom View Navigator panel (a feature panel with OK and Cancel): pick a
body in the view, its texture (Themed: the cube's colours; Modeled: the body's own appearance and
the view's edge colour), and whether the cube's rotation arrows and Home button go around it. The
navigator previews the panel's choices while it is open; Cancel leaves it as it was.

The custom navigator draws the body at the cube's size through a small depth-buffered raster, so
hidden faces stay hidden; hovering a face highlights it, a click looks straight at it (and frames
the model with navigator_fit on), a drag orbits. Until a body is chosen it draws the cube.

The body is kept as a packed snapshot (16-bit, base64) with the preferences and in settings
profiles, so it stays across runs and designs and travels with an exported profile. Bodies over
10,000 triangles, and long or flat ones (thinnest width under a fifth of the widest), are refused.

New command view.navigator (style, body, texture, arrows, home) does the same without opening
anything; new preferences navigator_texture, navigator_arrows and navigator_home, and a Custom
choice for navigator_style. Defaults are unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Custom view navigator: a hovered face in Modeled takes the view's selection colours

In the Modeled texture the face under the pointer is filled and outlined the way the view selects
a face of the model (sel_face, sel_edge), not in the cube's hover blue and accent, which Themed
keeps.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Custom view navigator: a hovered face in Modeled lights up as the view's mouse-over does

The face under the pointer keeps its own colour, a little lighter (hover_face_lift) and still
shaded, with its edges in the view's mouse-over edge colour (hover_edge), as the 3D view shows a
face under the pointer; not the selection colours. Themed keeps the cube's hover blue and accent.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Custom view navigator: rotation arrows and Home on by default

navigator_arrows and navigator_home start on, so a new custom navigator has the cube's arrows and
Home button around it; the Custom View Navigator panel turns either off.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Custom view navigator: the strings in every complete language, and test fixes

- The new messages in Arabic, Hebrew and Vietnamese (complete catalogs, like Japanese and Chinese).
- The navigator's raster goes through one colour helper, listed with its reason among the files
  allowed colour literals (the design's appearance shaded into pixels).
- nav_settings joins the requested-icon manifest (the view.navigator command's icon).
- A visible edge piece is kept only when the stretch seen with it, across the edge's segments, is
  at least two samples long: a hidden edge no longer shows a sliver at a silhouette corner.
- The navigator layout test treats Custom without a body as the cube it draws; the panel and
  size tests no longer assume an empty undo list, the style before opening, or a coarse sphere.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Custom view navigator: profiles carry its texture, arrows and Home

Settings profiles keep a fixed set of preference keys (#9907), which the custom navigator's newer
settings are not part of. They travel in the profile's own `view_navigator` entry, next to its
body (`view_gizmo`): captured, checked (a value this version can't read is left out) and applied,
leaving the fixed key set unchanged. The cube's arrow inversion (#10286) applies to the custom
navigator's arrows too, through the shared arrows().

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Custom view navigator: follow main's Vec3 move and fallible world_state

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Custom view navigator: list view.navigator in the rig's EXEMPT, refuse a stored body that can't save again, right-click without a widget over the navigator

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Custom view navigator: keep the body unless picked again, save only a profile that reads back, no navigator menu through a popup

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Custom view navigator: refuse a stored body with a triangle past its points

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Custom view navigator: a stored body meets the triangle and aspect limits a picked one does

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Custom view navigator: a body at the 5:1 limit stays inside it once packed

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 17:12:27 +00:00
Igor Bronovskyi 30842efb22 Ukrainian: translate the 174 messages main gained after the 3 November sync, panel layout and the redesigned preferences included (#11064)
* i18n(uk): translate the 80 messages main gained after batch 11

* i18n(uk): translate the messages main gained after 2 November

Add Ukrainian for the 158 English messages upstream added since the last
sync, and update 10 existing translations whose English text changed.

The new messages go in assets/locales/pending/uk-sync-2-nov.json, as the
locale files are not edited for new messages. The changed English text is
updated in assets/locales/uk.json, because a pending file cannot change an
existing message.

* i18n(uk): translate the messages main gained after the 3 November sync

Add Ukrainian for the 174 English messages upstream added since the last
sync, and update 56 existing translations whose English text changed.

The new messages go in assets/locales/pending/uk-sync-2-nov.json, as the
locale files are not edited for new messages. The changed English text is
updated in assets/locales/uk.json, because a pending file cannot change an
existing message.

* i18n(uk): apply CodeRabbit review fixes

Use the catalog's established wording: 'вибрати' in the keyboard hint,
name the linked component in the double-click help, and use the command
labels 'Упор', 'Бобишка' and 'Клацкове з'єднання' in the placement group.

* i18n(uk): use "Защіпкове з'єднання" for Snap Fit

The catalog called the plastic snap-fit joint "Клацкове з'єднання", a
calque of "snap". Use the standard "Защіпкове з'єднання" and
"защіпковий гачок" in the command label, help, sample description and
the design tools placement group. The drag hint already said "защіпку".

* i18n(uk): replace calques and outdated terms

Use "збіг" for coincident, "виступ" for lip, "ступиця" for hub, "шаблон" for preset, and "наддискретизація" for supersampling. Render and panel host texts now say "рендерер" or "середовище"/"вікно" instead of "хост".
2026-11-04 17:05:44 +00:00