main
4683 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
a55286953a | Regenerate generated files and fold pending files [skip ci] | ||
|
|
9a0846ef68 | Regenerate generated files and fold pending files [skip ci] | ||
|
|
06749ac464 |
Add the Fair Surface and Match Surface dialogs (#4644) (#4653)
* claim: #4644 * Add the Fair Surface and Match Surface dialogs (#4644) Neither command had a dialog, so the toolbar and command search ran them with no parameters and they failed with "`body` is required". Fair Surface picks the surface or some of its faces and sets the strength, the iterations, whether the edges are kept and an optional tolerance (blank: 0.001 of the body's size). Match Surface picks the surface or face to rebuild, the target and an edge chain of the target, and the continuity (G1, G2 or G3, default G2). Both preview, and Edit Feature restores the saved picks and settings. New labels go through the catalogs with English, Japanese, Chinese, German and Korean text. * Keep surface-dialog strings pending with complete translations (#4644) * Fair tolerance is a length; Fair and Match picks reopen on their saved bodies The Fair dialog's tolerance now goes through the same design-unit length conversion as the other surface lengths, on OK and when an edit is refilled. Editing a Fair or Match feature looks its face and edge picks up on the body they were saved on, so a coincident face or edge of another body cannot take their place. * Surface dialogs: strings stay in the pending catalog only (#4644) * Surface dialogs: edge picks use the session world, as main's edge_sel now does (#4644) * Surface dialogs: refuse to refill when a saved pick no longer resolves, and pass body names by reference (#4644) * Surface dialogs: Fair and Match now open dialogs, so the refused-command tab test no longer lists them (#4644) |
||
|
|
a6e7126bf1 |
Closed stderr pipes no longer crash the app, CLI or MCP server (#10111) (#10126)
* Stderr: a closed stderr no longer stops the app, the CLI or the MCP server (#10111) `eprintln!` panics with "failed printing to stderr" when stderr is a pipe its reader has closed. A process another program starts writes into such a pipe: `solidcraft mcp` under an agent, and the app that one starts, which inherits it. #10111 is the app stopping that way while an agent (Codex) connected. `solidcraft_geom::note!` (re-exported as `solidcraft_engine::note!`) writes the same line and ignores a failed write, as the CLI's logger already does; the app, the CLI, the MCP server, the crash hook and the crates they run use it instead of `eprintln!` outside tests. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Stderr: test that a closed stderr leaves the CLI's exit code as it is (#10111) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Stderr: the old name's alias and the fuzz command don't stop on a closed stderr either (#10111) `solvecraft-cli` writes its deprecation notice before it starts `solidcraft-cli`, so an agent still configured with the old name got the panic before the MCP server started (found in review). It and the fuzz command now write through `note!` too, and the test covers the alias. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
4a906699ee |
Browser: the component menu keeps its everyday actions and groups the rest in flyouts (#8769) (#8770)
* Browser: the component menu keeps its everyday actions and groups the rest in flyouts A component's or placement's right-click menu had grown to about thirty entries in seven blocks. Activate, Edit in Place, Open Linked Design, Move/Copy, Show/Hide, Isolate, the clipboard, Delete, Rename, Appearance, Physical Material and Properties stay on the menu; Ground, Capture and Revert Position, Unlock Contents and Turn Up Axis move to a Position flyout, Relink Source or Extract to File and the exports to File, New Component, New Group and Paste New to New, and Show All Bodies, Cycle Component Color, Expand All and Collapse All to Display. context_menu::entries lists a menu with its flyouts, as ui.menuPick reads it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Browser: the component menu nests its flyouts by topic, and flyouts no longer scroll Position (Ground, Capture and Revert Position, Unlock Contents, Turn Up Axis), Component (New Component, Rename, Appearance, Physical Material, Cycle Component Color, Relink Source or Extract to File, Properties; Design on the design's row), Export (Export, Save As Mesh, Send to Slicer) and Browser (New Group, Expand All, Collapse All) each open a flyout; Paste New stays with the clipboard and Show All Bodies with Show/Hide. Flyouts open inside flyouts, so Appearance keeps its quick choices inside Component; the keys walk in and out of them. A flyout no longer scrolls or sits away from its row: every flyout has its own area, measured whole, where a short one used to squeeze every later one into its height. A component's only body is no longer offered as a component of its own on a folded Bodies folder's entries. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Browser: the component menu starts with what a double-click does, and keeps the old order of its sections A linked component's menu starts with Edit in Place and Open Linked Design when a double-click edits it in place (double_click_components), and with Activate otherwise. Position, Component and Export follow Move/Copy, then the clipboard, then Show/Hide and Isolate, with Browser last, as the sections came before the flyouts. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Browser: Show All Bodies is on a component's menu only while a body is hidden It is listed while a body is hidden itself, in a hidden placement, or in a hidden Bodies folder or group of bodies, anywhere in the design, since that is what it shows. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Browser: Relink Source and Extract to File sit right below Rename in the Component flyout Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Browser: Placement and Organize flyouts, Turn Up Axis back as a flyout, and flyout fixes Placement (Ground, Turn Up Axis, Capture and Revert Position, Unlock Contents) follows Move/Copy above the first separator, Turn Up Axis opens its two turns in a flyout again, and the Browser flyout is called Organize. The Component flyout has three blocks: New Component with Relink Source or Extract to File, then Appearance, Physical Material and Cycle Component Color, then Rename and Properties. A flyout of a flyout that opened to the left opens to the left too instead of covering the menu, Left back to the menu chooses the row that opened the flyout, ui.menuPick refuses a row that only opens a flyout, and the icon audit checks every level. The guides and the control protocol describe the new menu paths. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Browser: ui.menu gives a flyout's rows their placeholder flag too ui.menu set placeholder only on the top-level rows, so a client reading a flyout row's placeholder got nothing. The icon audit now reads the flag of the flyout rows instead of resolving their icons itself. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
a2a7102859 | Regenerate generated files and fold pending files [skip ci] | ||
|
|
a137f2d459 | Sketch Trim: keep the driving distance when trimming a line offset first (#11442) | ||
|
|
f87dd73661 |
Selection filter: from command search it offers Faces, Bodies, Components (#11505) (#11553)
* claim: #11505 * Selection filter: started from command search, it offers Faces, Bodies, Components (#11505) Command search ran select.filter with no parameters, which could only fail with "missing field `mode`". Started from the UI (command search, a shortcut, ui.start), it now opens its three modes as a menu with the current one marked, as View > Visual style and Navigation tool do (#8868). Programmatic calls keep their contract and open nothing. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: thocsmith <193096300+thocsmith@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
af5644aee6 |
Ribbon: switch panel menus on hover after the first click (#11447) (#11713)
* claim: #11447 * Add an option to switch ribbon panel menus on hover * Update profile membership count for ribbon hover setting |
||
|
|
abeb232f17 |
Sketch Mirror: use an origin axis that is not in the sketch plane (#8201) (#12091)
* claim: #8201 * Sketch Mirror: use an origin axis that is not in the sketch plane (#8201) A sketch on a part face does not hold the world X, Y or Z axis, so Mirror refused the pick. It now mirrors about the axis's projection into the sketch plane and keeps that line linked as fixed reference geometry. An axis perpendicular to the plane stays refused because it has no line in the plane. The sketch's own X and Y axes keep working as before. |
||
|
|
1a27c8399d |
Linux 3D mouse: push/lift and tilt/twist axes are no longer swapped (#3523) (#4833)
* claim: #3523 * Linux 3D mouse: decode spacenavd's axes in its documented frame (#3523) spacenavd reports x to the right, y up and z away from the user, with the rotations about those axes. The decoder treated y as away and z as up, so with a stock spacenavd push and lift traded places, as did sideways tilt and twist. Map the daemon's axes to the raw HID frame as translation [x, -z, -y] and rotation [rx, -rz, -ry]. The decode still runs before a device's calibration and the per-axis motion choice, so both apply unchanged on top of the corrected reading. The tests now move each daemon axis on its own, in both directions, so a swap of two axes can no longer pass. |
||
|
|
5ab59e7c1b |
Assistant: DeepSeek and Qwen endpoint presets (#5016) (#5063)
Adds DeepSeek and Qwen presets to both endpoint protocols: OpenAI-compatible (api.deepseek.com, dashscope-intl compatible-mode/v1) and Anthropic-compatible (api.deepseek.com/anthropic, dashscope-intl apps/anthropic). Co-authored-by: Claude Code <noreply@anthropic.com> |
||
|
|
9a274f91df |
Planned bodies: smaller GPU chunks, and a chunk keeps its colours while they are unchanged (#5490)
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com> |
||
|
|
08fa042039 |
Dialogs: drag a value's label sideways to change it (#2217) (#9685)
* claim: #2217 * Dialogs: drag a value's label sideways to change it (#2217) A value row's label (expr_row, hint_row) now scrubs a literal value: about a hundredth of its size per point of drag, on that step's grid, Shift ten times finer, Ctrl/Cmd ten times coarser. The unit and decimal mark stay as typed, a size never turns negative, and expressions and parameters are left alone. The text changes as if typed, so previews follow and OK still makes one command. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Label drag: measure from the press point, cap values, keep scrub kit-private Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
09bb8aaaf5 |
Revolve: an axis origin written as an expression is no longer read as zero (#10252)
* fix: Revolve axis origin takes expressions instead of silently zero - AxisRef::Line origin is a PointExpr evaluated with parameter values in the design unit (format note in pending) - An unreadable origin or dir is a BadParams error instead of (0, 0, 0) - Edit Feature keeps the saved expressions of an untouched origin or dir, for solid and surface revolves, in moved components too - Face role names stay stable with a parameter-driven axis * chore: Re-run PR checks after the description fix * fix: Edit Feature of a revolve maps nothing where nothing is placed - unplaced designs skip world_state and the pick table, as before the merge - the untouched-edit test checks that OK applied the edit (CodeRabbit) --------- Co-authored-by: P'tite Tête <asso@ptitetete.com> |
||
|
|
46edd8d749 |
Agent chat: Custom instructions in Preferences, added to the system note (#8220) (#11105)
* claim: #8220 * Agent chat: Custom instructions in Preferences, added to the system note (#8220) Preferences > AI gets a multi-line Custom instructions field, saved with the other AI preferences (agent_instructions, kept by page resets like other user-written text). The chat adds the text after its own system note when a session starts, by the routes #9811 set up: ACP session/new (the Claude adapter's _meta key, the standard systemPrompt field, the Antigravity key) and the system message or field of every API protocol. Connect and New chat set it, so an edit applies from the next chat and never changes the one running. Blank text adds nothing; at most 4000 characters are kept, in the field, over ui.agent_chat and from a hand- edited settings file. ui.agent_chat takes and reports `instructions`. * Custom instructions: typing in the field stays in the field The text area did not report itself to Preferences search as a key sink, so with the field focused, search took the typed characters and moved focus away. The field now notes the sink while it has focus, like the other preference fields, and the #8220 test types into it. --------- Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com> |
||
|
|
c5d3dabd1b |
Split Body: the tool face follows a parameter change (#11674) (#11699)
The tool face of Split Body is now a face pick: it is named when it is picked and found again by that name, as other face picks are, so a split by a rail's face follows the rail when a parameter moves it. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
92171bd79b |
Hole: a hole on a face that another part touches drills its own part, not the other one (#12066) (#12067)
* claim: #12066 * Hole: a hole on a face that another part touches drills its own part (#12066) A hole placed by position with no direction drills against the outward normal of the face at the point. That face was looked for on every body, so where another part touched the face at the hole, the part made first won. The hole then drilled away from the part `targets` named and cut only the tool's run-in pocket into it, without an error. A hole that names its bodies now goes by their faces wherever one of them passes through its position, when it is made (hole_direction_at) and when a design is evaluated (hole_dir_into_face). Saved holes whose direction leaves their own body's face there are mirrored into it, as format 18 does for a thin plate's far side; the pending format note records it. A hole whose bodies have no face at its position (placed on another part's face to drill the part behind it) goes by every body's faces, as before. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01PVKpSUSGYjbrBhfZGjqZEE --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
2ce55baba1 |
Dimensions: a radius leader and an aligned dimension's line reach their text (#12093)
The value text is drawn level, in an upright box, and the line runs through its middle. The layout stopped the line where the box's farthest corner reaches along it (half.x*|u.x| + half.y*|u.y|), not where the line leaves the box (min(half.x/|u.x|, half.y/|u.y|)). They agree only when the line is level or upright: at 45 degrees a radius leader stopped about 12 px short of its text, and an aligned dimension's line broke too wide around its value. One helper, box_exit, gives where the line leaves the box, for the radial leader, the linear break and the leader to a text pulled past the extension lines. Whether the text fits between the arrows still goes by the whole box. A text box that isn't finite counts as empty, and one larger than a sketch can be is held to MAX_COORD. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
6870f9539c | Regenerate generated files and fold pending files [skip ci] | ||
|
|
2998d412b6 |
Primitives: clicking a pick field no longer jumps to the Diameter box (#10428) (#10536)
* claim: #10428 Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch> * Primitives: a pick field waits for its pick and says what it is for Clicking Face, Reference 1 or 2 in the Cylinder window, or Point in the Box, Sphere and Torus windows, and then clicking something the field does not take (empty space, the cylinder's own preview) gave the keyboard to Diameter, so the field no longer looked active and nothing said why the click picked nothing. A pick field clicked into now keeps the keyboard until a click picks something, and a click it does not take leaves a note under the form saying what the field is for. These fields also get their own tooltips: Face is the face or vertex the cylinder stands on, Reference 1 and 2 are straight edges of that face the distances below are measured from, and Point is a vertex, edge, face, sketch point or the origin whose point fills X, Y and Z. Fixes #10428 Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch> --------- Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch> |
||
|
|
2396b6be05 |
Hole: the drag handle looks like the Rest, Boss and Snap Fit handles (#6818) (#6819)
* claim: #6818 Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * Hole: the handle drawn with the shared marker (#6818) A Single hole's drag handle (Move holes by clicking or dragging) is drawn with the placement marker from place_gizmo/look.rs instead of its own ring and cross, so a hole and a Rest on the same model show one language for the same action. place_gizmo::marker is the one crate-visible door: it runs the marker's hover and drag motions under the handle's id and draws the crosshair, never dimmed. Hole keeps its snapping, the click that takes a hole out, its handle names and its hover text. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * Hole: hole_handle removed (#6818) The shared marker draws the handle now; nothing else used it. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * Hole: the marker takes no colours it does not use (#6818) place_gizmo::marker took a &Tokens only to hand it to crosshair, which reads its colours itself, so the hole's show fetched tokens nothing read. The argument and that fetch go. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Hole: a test sees the handle drawn as the shared marker (#6818) The hole tests found the handle by its published position, which the look does not change. This one reads what the frame paints round it: the white dot and four dashed arms at rest, no ring round the centre, arrowheads when pointed at, solid shafts while it drags. It fails with the old ring and cross back on the call line. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Place handles: marker hover eases in 120 ms, drag in 220 ms (Refs #6818) The marker answered the pointer in 220 ms and a drag in 360 ms, which felt slow on review. Both stay in look.rs as the one place a later preference can read them. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com> |
||
|
|
3c1074cfc6 |
Timeline: moving a construction axis now updates the features that use it (#9544) (#9545)
* Evaluation: a construction axis moved past a feature makes it evaluate again (#9544) The state digest in a feature's cache key left out the construction geometry before it, and the context digest hashes construction features without their order. A feature started from the same key with or without the axis before it, so after a move it kept its old result, and a cached state restored whole brought back the construction list it was made with. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Evaluation: say plainly what an empty construction list hashes (#9544) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude <noreply@anthropic.com> |
||
|
|
c4a63a1d43 |
GPU path tracer: don't rerun a setup that crashed in the driver (#9236) (#9666)
* claim: #9236 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * GPU path tracer: don't rerun a setup that crashed in the driver (#9236) A driver that takes the process down while it compiles the path tracer (RADV on an RX 7600) is beyond error scopes and unwind guards. A running setup now keeps gpu-path-setup.json (its adapter key) in the settings folder, removed when the setup answers or the app closes normally. A launch that finds it for the same adapter leaves the setup failed with an explanation and a Try again button; CPU ray tracing stays available, and a driver update changes the key and so tries again. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
2fdcc5ae49 |
Appearance: a picture of your own behind the model (#11353)
* Appearance: a picture of your own behind the model Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Background picture: a label that fits its row Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
4678a04827 |
Agents and scripts: the contact commands describe their exact parameters and reply (#11949) (#11950)
* claim: #11949 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Contact sets: input and output schemas for the seven contact commands (#11949) describe_command now gives the exact parameters and reply of contact.enable_sets, enable_all, disable_all, create, edit, list and check, and the warn and strict parameter checks use them. The handlers read their parameters from the raw JSON, so the contracts in schema/motion.rs read each key as its handler does, with its message: `occurrences` (OccurrenceKeys) and `set` are required in the schemas but left to the handlers' messages in the types, through a small `require` transform. The replies are built from typed values instead of json! literals, with the same JSON; the listed sets mirror the doc crate's ContactSet. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude <noreply@anthropic.com> |
||
|
|
63ffadfebf |
Import: a curve that refers to itself is refused instead of overflowing the stack (#11893)
A 2D TRIMMED_CURVE in a pcurve read its basis straight through read_curve, past the depth check that only the cached entry points (curve_in, curve_2d, surface_in) made. A trimmed curve whose basis is itself, or a loop of two, recursed until the stack overflowed and the app closed. The depth check now sits in read_curve and read_surface, which every curve and surface read passes through, so any chain of references, a cycle included, ends at MAX_GEOM_DEPTH with an error that names the entity: "curve #9: definitions nested more than 12 deep, or referring to themselves". The other nested entities (surface, seam, intersection and bounded surface curves, pcurves, 3D offset curves, offset, trimmed, revolution and extrusion surfaces) already went through the checked entry points; they now share the one check. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
aee947f0f9 |
Sketch: hovering over a large sketch no longer slows down (#9614)
* claim: Sketch: keep profile outlines and trim/extend cuts between mouse moves * Sketch: keep profile outlines and trim/extend cuts between mouse moves Hovering a large sketch sampled every profile's loops into polylines for each point asked, and Trim/Extend intersected the hovered curve with every other curve on every mouse move. - Loop2::contains rejects points clearly outside a box from the loop's end and control points before sampling; Region2::outline samples the loops once (RegionOutline). Profile keeps both in OnceLocks and answers Profile::contains from them (viewport pick, profile_at_point, profile selection by points). Answers are unchanged: the box margin covers rounding, and non-finite values or negative conic weights skip the box. - sketch_modify splits the cuts on a curve (TrimHover) from choosing the piece around the cursor. The UI keeps one per sketch state and curve, and Extend's preview per sketch state, curve and growing end (afresh when the sketch has an infinite line). Plate with 400 circles (801 profiles), release, per mouse move: UI frame 5.19 -> 1.11 ms, with Trim 9.45 -> 1.50 ms; 30 lines x 30 splines: Trim piece 6.10 -> 0.0002 ms. Equivalence tests compare with the old answers. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Sketch: keep the profile outline helpers in the sketch crate The outer loop's box, the clearly-outside test and the outline sampled once move from geom into crates/sketch/src/profiles.rs as private items built from geom's public types, so the PR leaves crates/geom untouched. Profile::contains answers exactly as before; the geom test moves to the sketch profile tests. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
ad56dd6a93 |
Box window: a picked point fills Corner and Center in the design's unit (#12051) (#12052)
* Box window: a picked point fills Corner and Center in the design's unit A vertex, edge or face picked into the Box window's Point input wrote its X, Y and Z as millimetre text whatever the design's length unit was, so an inch design showed "50.8 mm" where the other fields read inches. The fields now take the point through length_input::model, as Move and the Hole references do, so they read "2 in" there and stay "50.8 mm" in a millimetre design. The same applies to the Sphere and Torus centre. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Box window: a picked point reads to a millionth of the design's unit length_input::model divides without rounding, so a vertex at 38.1 mm read "1.5000000000000002 in" in an inch design. length_input::shown rounds to a millionth of the design's unit, as the millimetre text did before, and the test pins that case. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Box window: a picked point keeps the micrometre in every design unit length_input::shown rounds to a millionth of the design's unit, and the picked point's text is what OK sends, so in a metre design a vertex could move by up to half a millimetre. Document::design_length keeps the micrometre in every unit and still writes 38.1 mm as "1.5 in". The test now covers a metre design with a point that is not round in mm, and the Sphere and Torus centre. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
cafe015ef9 |
Arabic: sketch tool hints and errors, view-mode name, face term and Fillet name in the hidden-edge selection preference (#12080)
* Arabic: view-mode name, face term and Fillet command name in the hidden-edge selection preference * Arabic: translate the sketch tool hints and errors, clearer Fillet phrase in the hidden-edge selection help |
||
|
|
155387bac1 |
Sketch Trim: a cut on a shape's centre ends the piece there, with no second point (#12101) (#12103)
* Sketch Trim: a cut on a shape's centre ends the piece there, with no second point Trimming half of a center rectangle's diagonal left two points at the centre. Trim dropped the diagonal's Midpoint constraint and ended the kept half on a new point held only on the other diagonal, so the old centre was free and the new end slid along the other diagonal. Dragging a corner pulled them apart. A cut that lands on a point held at the middle of the trimmed line or of the cutter now ends the kept piece on that point. When the trimmed line held it, the Midpoint moves to the cutter if the point is the cutter's middle too (a rectangle's diagonals bisect each other), and otherwise the point is held on the cutter as a new end would be. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Sketch Trim: weld the cut end before a parallel distance moves onto it A distance between parallel lines that measured from the trimmed line's end moves to the kept piece's start. When that start is a cut welded to a centre point, the move named the new point, which the trim then removed along with the dimension. The weld now happens first. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Sketch Trim: test that a parallel distance moves onto the welded centre Trimming the start half of a center rectangle's diagonal moves a distance to a parallel line onto the kept half's start, which is the centre. The test fails if the weld runs after that move: the dimension then names the cut point and is removed with it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Sketch Trim: the centre comment names the case that reaches it Only a line carries a Midpoint, so the comment's ellipse case could not reach this code. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Sketch Trim: a crossing line whose middle is only near the cut gets no midpoint hold Trimming a line at its held midpoint moved that hold onto the cutter whenever the cutter's middle sat at the cut, so a crossing line that merely happened to have its middle there was tied to the point. The hold now moves only when the sketch makes the two lines diagonals of a parallelogram (each pair of opposite sides held parallel, horizontal or vertical), as a center rectangle's are; otherwise the point stays on the cutter. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Sketch Trim: ask the solver whether a cutter's middle is held at a cut midpoint Moving a cut midpoint's hold onto the cutter only for a parallelogram of parallel, horizontal or vertical sides missed rectangles the sketch holds another way: with the bottom side held square to a side instead of horizontal, trimming a diagonal at the centre left the centre held only on the other diagonal, one degree of freedom freer than before. The hold now moves when the sketch already implies it, that is when adding it to the sketch as it was takes away no degree of freedom. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Sketch Trim: solve for the implied midpoint only when a cut lands on one Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
de1db6fb8c |
Parameters: reach the end of a long expression the same way on every OS in its test (#12104)
a_long_expression_opens_wide_while_edited_and_enter_applies_it moved the cursor to the end of the wrapped field with Ctrl+End. The control channel's cmd flag also sets ctrl, and on macOS egui treats Ctrl with End as an unhandled Emacs-style chord, so the cursor stayed where the click put it. The typed " * 2" did not land at the end, the parameter kept its old expression, and the test failed on macOS while it passed on Linux. The test now uses Command+Down with ctrl off, which egui maps to the end of the text on every platform. What the test checks is unchanged. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
c47e848f4a | Regenerate generated files and fold pending files [skip ci] | ||
|
|
8b4fe10995 | Regenerate generated files and fold pending files [skip ci] | ||
|
|
8fb046aaa8 |
Sketch: the whole sketch updates while you type a dimension's value (#11584) (#11585)
* claim: #11584 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Sketch: the sketch follows a dimension's value while it is typed (#11584) While a new dimension's value was typed, only the dimension moved: the sketch's curves, points, constraint glyphs and other dimensions stayed at the old size until Enter. The typed value was already solved in a scratch session; it is now solved in the frame it is typed, and the open sketch is drawn from that solve, for every kind of curve, within the display cache's limits per sketch. Esc draws the design again. Picking and snapping of curves and points stay on the design, and no hover highlight of the design is painted while a value is typed. A value that does not solve keeps the last one that did. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Dimension: the sketch scene follows each solve of a typed value, not its address (#11584) The sketch scene was keyed on the preview's address, which a later solve can have once the drawn one is freed; the scene would then stay at the old value. Each solve now has a number, and the scene is keyed on it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Dimension: while a value is typed, no design profile is lit over the sketch, and its curves are sampled before its fills (#11584) The profile under the pointer was lit where the design has it, over the sketch drawn at the typed value; it is no longer, and the highlight is built again when the value is let go. The typed sketch's profiles were sampled before its curves from the one budget, so a sketch whose fills used it up lost its curves; the curves now go first. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Dimension: a selected profile is not lit over the sketch while a value is typed either (#11584) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Dimension: the view goes to the typed preview only once a value is typed (#11584) A picked dimension's value box opened with a draft that is the design as it is, and the view already treated it as the typed preview: the profile under the pointer, the selection and the hover went dark before anything was typed. The preview now starts with the first key, completion or reference. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Dimension: a reference picked into the value is solved at once (#11584) The overlays read the preview before the editor solves a changed value, so for the click's frame they drew the solve before the reference. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Dimension: a selected sketch curve is not lit where the design has it while a value is typed (#11584) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Dimension: the pointer's x, y readout is not drawn while a value is typed, as the hover is not (#11584) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Dimension: curvature combs, the design's teeth, are not drawn while a value is typed (#11584) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Dimension: while a value is typed only the open sketch loses its hover and profile highlights; other sketches keep theirs (#11584) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
7b31c0567b |
Sketch Transform: turn and scale about a picked point, such as a rectangle's corner (#11718) (#11797)
* claim: #11718 * Sketch Transform: turn and scale about a picked point, such as a rectangle's corner (#11718) The Transform window turned and scaled the picked entities only about the middle of their box. It now has a Center field, as Move does. A sketch point picked there is the point Scale and Angle work about, and Position moves it. The box, its corner handles and the knob in the view follow the same pivot. With Center empty, Transform works as before. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Sketch Transform: a click on a corner picks it as Center while Center waits for a pick (#11718) The rectangle corner the issue wants to turn about sits under the box's corner handle, so a click there started a scale. While the Center field waits for a pick, the box's handles leave clicks to the sketch. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Sketch Transform: the handles work again once Center has its point (#11718) Center is the window's last field, so a pick there left it active, and the box's handles stayed off until another field was clicked. They are now off only while Center is empty and waiting for its pick. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
5efdd52854 |
Ribbon: a tool pinned into the Finish Sketch group shows pressed (#12049) (#12050)
* Ribbon: a tool pinned into the Finish Sketch group shows pressed The Finish Sketch and Finish Editing groups never drew the pressed state for any of their buttons, so a drawing tool dragged into them (the group at the ribbon's right edge takes drops) looked like a one-shot action while it ran. Only Finish, Cancel and Finish Edit are now left out of the pressed state. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Ribbon: test that Finish, Cancel and Finish Edit stay plain under a press None of the three runs as a tool or leaves a dialog behind, so a press is the one way they could light up. The tests now press each one and fail if any of them is dropped from the exclusion. Finish Edit is pressed and released in the edit-in-place test, so the release is also the click that finishes the edit. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Ribbon: Finish with AutoConstrain stays plain under a press like Finish Finish with AutoConstrain belongs to the Finish Sketch group and ends the sketch like Finish, but it was not in the list of buttons left out of the pressed state, so once pinned as a button it lit while the pointer was held on it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
61ada52984 |
Reuse unchanged imported meshes during joint motion (#5476) (#5480)
* perf(mesh): reuse imported contents and display triangles * fix(viewport): preserve reference mesh detail and glass fallback * fix(viewport): preserve small faded mesh ordering without OIT |
||
|
|
6578d591ac |
control::execute: check the undo depth before placing the world for the first-body fit (#5940)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
d9421bf2ca |
Browser: an option to start folders closed and open rows only on request (#8768) (#8771)
* claim: #8768 * feat: Browser folders start closed and find a body only when asked, behind a preference Preferences › Layout › Browser rows start closed (`browser_rows_start_closed`, off by default) starts the Browser's folders closed, and placements too whatever "Components start open" (#9274) says. Rows then open with their arrow, Expand All or Find in Browser, which opens just the rows down to its body and closes again the ones the last find opened. A body picked in the 3D view leaves the Browser as it is, and only the body Find in Browser found has the rows above it marked, so a large assembly's placements are not named again after each edit. With the preference off, folders start open, placements start as "Components start open" says, and a pick in the 3D view opens the Browser down to its body, as on main. Find in Browser looks the body's placement up once and opens its rows before drawing, instead of each row testing the revealed path while it is drawn. * Browser tests: read the row order from the Browser's content frame Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: bherbruck <brennen.herbruck@gmail.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
774c45a512 |
Dynamics: rigid-body solver core with joints, gravity and springs (#9719) (#9721)
* claim: #9719 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Dynamics: rigid-body solver core with joints, gravity and springs (#9719) A new L1 crate, solidcraft-dynamics (geom only): rigid bodies in maximal coordinates, joint constraint equations with analytic Jacobians for rigid, revolute, slider, cylindrical, planar and ball joints, gravity, linear spring-dampers and constant loads; the index-1 equations of motion solved through a rank-revealing Schur complement (repeated joint equations are solved, not refused); RK4 and Dormand-Prince 5(4) with position and velocity projection; joint values, rates, reactions and energies at every output sample; caps on bodies, joints, rows, steps and samples; Result errors only. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Dynamics: take Vec3 from the record crate after the layer split, refresh the lock file Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: bherbruck <brennen.herbruck@gmail.com> |
||
|
|
315d8cfeb7 |
fix: sketch.intersect keeps a small round between short walls (#9962)
- section() kept the loose fit whenever it had fewer curves, even when it had merged 2 mm walls and an R2 round into one R2.85 arc that misses the walls, leaving the outline open - The tight fit is now also kept when the loose one strays from the exact crossings (on planes and rulings) and the tight one does not; capped work, other curves count as near - Test: a box with R2 corner rounds and four tapered grooves stopping 2 mm short, cut at Y=20 Co-authored-by: P'tite Tête <asso@ptitetete.com> |
||
|
|
4ab1640dc8 |
OCLP detection: run /usr/sbin/nvram by its full path (#10109)
The probe ran `nvram` through PATH, which a Finder launch may not list and which a look-alike earlier in it could change. The doc comment that said exec would need unsafe is replaced by a description of what the code does. Behaviour is otherwise unchanged. Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com> |
||
|
|
3aee35fe01 |
Web app: keep unsaved work in the browser instead of the leave-page box (#10220) (#10221)
* claim: #10220 * Web app: keep unsaved work in the browser instead of the leave-page box (#10220) A new preference, off by default, on Preferences > General > Saving (web app only): "Keep unsaved work in this browser instead of asking when the tab closes". With it on, each open design with unsaved changes keeps a copy in the browser's private storage (keep-<page>-<design>.sc/.json), written once the design has been still for 0.8 s (at most 4 s after the first change it lacks) and again on pagehide or when the page is hidden. While every copy is current, beforeunload doesn't ask. A copy goes when its design is saved, closed, or the preference is turned off. The next visit offers the copies newer than their design's last save in SolidCraft's own window, "Restore unsaved design: <name>, changed <time>?", one window for several, with Restore, Open saved version, and Discard. A page holds a Web Lock while it runs, so another open tab's copies are never offered or removed. With the preference off, the single autosave and the browser's prompt work exactly as before. * Web app: the restore window comes from the UI kit's recovery module (#10220) The kit's text and divider helpers are private to the UI crate, so the "Restore unsaved design?" window moves to recovery_ui (browser_copies_window), beside the desktop recovery window, and the web shell only maps its answer. Also keeps the window handle for the page listeners instead of using the one moved into the app. * Web app: restore window buttons sit in one row (#10220) * Web app: keep unsaved work and still ask, unless told not to (#10220) Keeping a copy in the browser no longer replaces the browser's leave-page box by itself. A second option, shown once work is kept and on by default, leaves the box in place; off, the box appears only while a copy isn't current. * Web app: kept-copy review fixes (#10220) A failed write of a kept copy waits 30 s before the next try, a recovery copy is dropped only after the remembered saved file has opened, the preference is documented under its current label, and the ui.prefs list is sorted again. |
||
|
|
5562d9c6c8 |
Quick-access bar: pin ribbon commands to the application bar (#10223) (#10224)
* claim: #10223 * Quick-access bar: pin ribbon commands to the application bar (#10223) A command's menu (a ribbon button, a section drop-down row or a command search result) has Add to Quick Access: the command's own icon joins the application bar after Save, Undo and Redo. A click starts it as its ribbon button does, a drag along the bar reorders the buttons, and the button's menu has Remove from Quick Access. Empty, and so not drawn, by default; it holds up to 24 commands. The list is kept with the toolbar's customisations (`quick_access` in the toolbar's saved document), so it is saved, exported with the keyboard shortcuts and carried by settings profiles. * Quick access: a pinned family variant no longer replaces the ribbon choice A quick-access click now starts the pinned command with start_pinned, so it starts exactly that command and leaves the sketch family remembered choice (the main ribbon button) unchanged. |
||
|
|
d16496e057 |
Navigation: honor reverse zoom for mouse drags (#10354) (#10365)
* claim: #10354 * fix(ui): honor reverse zoom for mouse drags |
||
|
|
0690ee5875 |
Web app: run as a modelling editor inside another page that keeps the design files (#8517) (#11273)
* claim: #8517 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * web: editing embed for host pages (?embed=editor, #8517) A host page that keeps the files itself and frames SolidCraft for modelling needs the modelling UI without the application chrome. `?embed=editor` runs the web app as such an embed: - no application bar (logo, File menu, document tabs, update, help, report a bug) and no start page; the layout is docked; - the ribbon, browser, timeline and properties stay; Ctrl+Z and Ctrl+Y still undo and redo; - Ctrl+N, Ctrl+O, Ctrl+S, Ctrl+W and Ctrl+, are left to the host; - nothing is kept in the browser (no stored designs, autosave, recovery prompt, preferences or leave-page prompt), as with the existing viewer embed. The existing `?embed&open=` viewer embed is unchanged. SolveApp gets one flag, `embed_editor`, for desktop and test hosts too. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * control: document.export / document.import / document.saved for a host (#8517) An editing embed's host keeps the design itself. Three control methods (window.solidcraft.request in the browser; the desktop control channel too; not the agent chat's, whose method list is unchanged): - `document.export` -> {name, revision, dirty, format: "json", text}: the active design as a `.json` design file holds it. `revision` is the one `document.revision` answers, so a host that follows the design compares one number. - `document.import {text, name?}`: replaces the active design with that text, timeline and parameters as saved, opened saved with a new `document_id`. It runs as a design opened in a tab of its own, with the old tab closed without asking, so whatever was open in the old design leaves with it. A text that does not read leaves the design as it was. Waits behind a file loading or a design change, as commands do, and evaluates on the window thread. - `document.saved {revision}`: the host saved that revision; refused when the design has changed since. They are control methods, not commands: they act on the app's open design. The browser API test gets a round trip through all three. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: aduijs <7501203+aduijs@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
1dd921fc52 |
Components: stop Capture All Positions from doubling moves (#11259) (#11364)
* Model cache: a body made by rounds keeps them, so a later round blends them the same after opening A design gave another body when opened from its model cache: the rounds a body was made of lived only in memory, so a later round at their mitre was built sequentially (or refused, as too large) after opening and blended with them when evaluated anew. The saved model now records, per kernel body made by rounds, the body they were made on (a place in the bodies, stored once though no state holds it) and the edges with their radii; reading it attaches them back down each chain, and a thinned model keeps those bodies with the bodies made from them. Model cache format 7. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Tests: a corner patch of rounds 2/3/4 takes no more than the strips leave in its block three_rounds_at_a_corner bounded the patch's extra cut at 3 mm³ beyond the strips, a figure with no derivation; SMLib's all-at-once body at radii 2, 3, 4 takes 3.099 (V 7878.579574 against strips 7881.678). That body is the strips' outside the block its patch lies in: its rounds are the strips' cylinders ending at a's section y = rc, b's x = 20 − rc and c's rails where they meet a's and b's (the patch's four corners, now asserted), so the patch takes at most what the strips leave in that block (11.86 at 2/2/3, 32.69 at 2/3/4). The lower bound is that block; the upper one, at most the strips' volume, stays. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Tests: the io crate's hand-built saved models list their rounds, as format 7 records do Model cache format 7 (f3cf0c4f3) records a `rounds` list in every saved model, and reading one without it is refused ("saved model: rounds"), as is a model without any of its other lists: the states, the preview and the thinned model all came back empty. The io tests' saved_model and timeline_model wrote format-6 records, so six tests (the round trip, the repeated part stored once, and the four too-big-for-the-file cases) read nothing. Their bodies are none made by rounds: the list is empty, and every expectation stays as it was. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * SMLib: pin eaa998a (tangency-labs/smlib#68, #69, #70) Batch 4: drafts and loops, mitre corners, rim chamfers, rulings, tight box, stitch, point classification, eased corners. Batch 5: a face's tight box divides its cells at the surface's knots (thread boxes exact); a cylinder, cone, sphere or torus is extended along its own circles. Batch 6: a revolution's extension closes its turn; a dropped point's foot is the converged one. The C API is ABI 5 (smlib_blend_dropping and smlib_brep_classify_point are new; nothing existing changed), so the binding expects 5. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Tests: a strip's tangent and curvature run-offs are the distance long across the surface SMLib measures an extension's distance across the surface (smlib_extend_sheet corrects CreateExtendedSurface until the parameter line through the side's middle is that long), so each run-off of the cylinder strip, swept 20 along z, adds 5 x 20: 10 pi/2 20 + 100 = 414.159 for both. The parabola-length formula (418.18) was truck's. Ruling d2 (2026-10-30). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * kernel: one smooth angle, and a round too small to change the part is refused The blend's tangent angle is the shaded view's half degree (smooth_edges::ANGLE), one value for smooth. A constant round lies r (sec(d/2) - 1) inside the crease it replaces (about r d^2/8); below the edge's tolerance it changes nothing and is refused before SMLib (which answered SM_ERR_INVALID_INPUT), naming the smallest radius that rounds, tolerance / (sec(d/2) - 1). d is the least turn along the edge (tangent_edge::least_angle_along, at tangent_all_along's stations). Ruling d3 (2026-10-30). The block's tolerance is 2e-5 mm, not 0.1 um: at 1 deg the smallest radius is 0.526 mm, so R2 and R20 reach SMLib, which still calls an edge within 2 deg smooth (SmEdge::GetBlendEdgeuse); that test is ignored until SMLib uses 0.5 deg. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Fillet rig: the knife-edge chamfers name SMLib's cause, a cusp's ball radius of 0 smlib_chamfer turns the distance into a ball radius d sqrt((1 - c)/(1 + c)), c the faces' binormals' dot (capi chamfer_radius); at #851's cusp the binormals agree, the radius is 0 and the call is SM_ERR_INVALID_INPUT before the fillet executive runs (gdb: chamfer_edges sees radius 0; the dump's why is empty). SolidCraft hands every chamfer to SMLib, so the ball-contact chord (the ball of radius d: 3.822 wide at d = 2, 159.2365 removed) is SMLib's to build. Ruling d4 (2026-10-30). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * kernel tests: a corner round wider than its faces overflows and takes the corner's other edges R21 on a 20 mm cube's edge builds (6107.529370, closed form, to 2e-12). With R5 on the corner's other edges the R21 takes the faces they lie on, so the body is R21's alone; SMLib fails that blend (status 1001, fillet error 4, Unable to Trim Rail Curve) and the test is ignored until it builds. It replaces the refusal test that expected TooLarge. Ruling d8 (2026-10-30). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Tests: a 1 degree crease rounds, and the knife edge's chamfers build, on SMLib smlib-batch-4-rulings With SMLib's smooth limit at half a degree (422e6f1) the 1 degree crease rounds R2 and R20 (the test is no longer ignored), and with a cusp's chamfer the ball of radius d (d231547) the The 0.5 one stays, for its own cause (the chamfer face left apart from the body). Two corner cases the same SMLib (replay/1.0.1 and those commits) builds come off too. Needs SMLIB_REV at that SMLib once it is pushed. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * kernel, doc: an overflowing round goes first; an edge it removes is gone, and the fillet says so SMLib (smlib-batch-4-rulings 0e83cca, SMLIB_ABI_VERSION 5) rounds the edges whose rounds overflow their faces first and then what is left of the others; smlib_blend_dropping says which picks' edges the overflow removed whole. The smlib crate binds it (Brep::blend_dropping), the kernel returns those picks (fillet_removing), and a fillet notes them as its warning: "the edge at (0, 0, 10) was removed by the larger round, so it is not rounded" (a 50 x 50 x 20 block, R21 on its bottom front edge with the front left upright: the block is R21's alone, in closed form). Ruling d8: [21, 5, 5] on a 20 cube builds as R21 alone (6107.529370); the test is no longer ignored. R25 with R2 at a corner (blend_corner) builds the same way, R25's alone in closed form, where it was refused. The rig's 1080 notched block outline at R8 builds now and comes off the known-failing list. Needs SMLIB_REV at that SMLib once it is pushed. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Fillet rig: the knife edge's 0.5 chamfer builds SMLib's trim took a fillet meeting its face at more than 78 degrees for one with no side (smlib-batch-4-rulings 971e567); the chord of the knife edge's 0.5 chamfer meets the flat face at 81 degrees. The case comes off the known-failing list. Needs SMLIB_REV at that SMLib once it is pushed. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Tests: a 15° tapered text builds, every letter grown, exact where its outline gives it Owner ruling d6: the letter t of "tres long" was drafted inward by SMLib (its loop's normal, summed from the cross products of its chords, pointed down; fixed in SMLib). With the fix every letter grows, and the join builds at 3° and 15° by the Round rule and by the default rule (tangent for spline outlines), where before 15° was expected to be refused. Exact where the outline derives it: a letter's section at height z is its outline offset by e = z tan a, by the Round rule of area A + P e + C e² while the offset trims nothing (Steiner; C half each loop's turning less tan(t/2) - t/2 at each reflex corner), so the letter is A h + P k h²/2 + C k² h³/3. Each extruded alone, the t at 3° and s, l and o at 3° and 15° are checked to 1e-6 (SMLib measures them within 1.3e-9; its mass properties integrate to 1e-8). The concave joins of r, n, g and e are tighter than e already at 3° (their swallowtails trimmed: r 1.1e-3 under the formula), the t's by 15° (9.9e-5 over), and on the block the letters grow into each other, so the whole word is checked for what holds exactly: one closed body with the block, and half-way up every point of each straight letter's outline inside the solid (the t drafted inward failed that). With SMLib's fix (smlib-batch-4-text-loops 82133b2). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: a sloped basin's mitred rim rounds are checked tangent along their contact lines 1080-fillet-sloped-basin-1-mm-rim-r0-5-4-edges asked G1 at every blend seam. Its front wall leans 19 over 20 and the others 10 over 20, so at each rim corner the two mitred rounds meet the sloped corner edge at different heights (0.155625 and 0.276393 below the top): the deeper round runs on past the corner edge and is cut by the plane of the other's wall, a crease by construction, the gap below the shallower round filled on that plane. The check now measures the rounds' contact seams, on the top and on each wall, where the rounds are tangent. The volume is unchanged. With SMLib smlib-batch-4-mitre (1c15364): the case passes (V 144530.427946 against 144530.427909, 15 faces, sound); before it, only the four corner creases failed the check. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * smlib: Brep::classify_point says exactly where a point lies against a body Binds the fork's smlib_brep_classify_point (SmBrep::Point3DClassify at the body's own zone tolerance): inside, outside, or on the boundary within that tolerance of a face, an edge or a vertex. A box and a cylinder just off its curved wall in measure's tests. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs * kernel: Body::classify_point decides inside, outside or on the boundary exactly SMLib's point classification at the body's own tolerance, on the exact faces and edges, in place of a mesh at a chord of 2e-3 of the body's size (about 0.4 mm on a 200 mm part). A point within the tolerance of a face, edge or vertex is OnBoundary, never decided by a ray. A mesh body's triangles are its exact shape: on them within the record's tolerance, else by ray crossings. The kernel's own probes move to it; Body::contains goes once its last callers have. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs * doc: a hole decides whether it exits at its drill point's shoulder exactly Material past the depth needs a body with the point inside, air before it needs every body to have it outside; a point within a body's tolerance of the exit face is neither. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs * engine tests: probes ask for the exact point class Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs * ui, cli tests: probes ask for the exact point class Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs * kernel: Body::contains, the mesh test, is gone Every caller asks Body::classify_point now. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs * kernel tests: the rim chamfers running off their rims build, on SMLib 737c392 chamfer_wider_than_sloped_basin_rim_builds and a_rim_loop_chamfer_running_off_its_rim_builds waited for SMLib to build the cliff overflow (CloseRemovalRegion refused it, SM_FILERR_NO_ROOM). The pinned SMLib builds it (eddf0ede4, bba9914b6): both pass on aarch64 Linux and are no longer ignored. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Fillet rig: the cases SMLib 737c392 builds come off the known-failing list The gate on aarch64 Linux reports 16 fillet cases FIXED with the pinned SMLib: the sloped and equal-slope basin rim chamfers and rounds past their rims (1080-*, 5835-*), the pocket rim chamfer past the floor, and the three pocket rim rounds now mitred at the pocket's corners (every-pocket-*). No other area's gate reports a case fixed. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * kernel: the re-blend's removed picks formatted as rustfmt lays them out Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * kernel: blend_smlib laid out by the 2024 edition's rustfmt Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Skills: the tests skill's unit-test example stays under the 3600-character limit Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Fillet: the radius-too-large choice in plain nouns "If too large: Stop and say so / Largest that fits / Narrow where needed" becomes "Face limits: Exact radius / Largest radius / Narrowed radius", in every language of the catalog, with the error and the tip that name them. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * kernel: a round that would cut through its wall into a hollow is refused The owner's rule of 2026-10-30: a round running past a rim of its faces into open air builds; one whose section would remove material through to a hollow behind its edge (a slit into the hollow, a cut through the part) is refused as too large, so the fillet names the largest radius that fits. Decided exactly in the section of a straight convex edge between planar faces: the round's centre is at depth r below both planes, and it opens where its arc uncovers a boundary point strictly inside the wedge with no material beyond it toward the centre (the body's exact point classification). Looked at: straight edges parallel to the round's (a hollow's corner), cylinders about parallel axes (a rounded corner), and a picked concave parallel edge's own round, which fills the corner. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Fillet rig: 1668's R7 past the inside corner is refused at 4 + 2 sqrt2 The round's centre (32 - r, 42 - r) leaves the hollow's corner (30, 40) outside its circle, opening the wall, where sqrt2 (r - 2) = r: the case expects the refusal naming 6.828. 2852's R30, refused naming 25.24, now passes too: both come off the known-failing list. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * xtask: known-failing grades a nextest junit report against tests/KNOWN_FAILING_TESTS `cargo xtask known-failing --junit PATH` reads nextest's junit (a file, or every .xml under a directory, so all of a run's junit artifacts at once) and fails on a test that failed and the list does not name, and on a listed test that passed (FIXED: take its line off, as the kernel rig's gate does). A listed test that did not run is neither, since a pull request tests only the packages it touches. The list has the rig's KNOWN_FAILING format (`<test> <cause>`, sorted, the rig's own parser), with `<test>` nextest's `<binary id>::<test name>`; `cargo xtask lists` checks it is sorted. The list starts empty. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * CI: the test jobs grade their junit against tests/KNOWN_FAILING_TESTS Native Linux tests and the GPU path test shards no longer fail on any failed test: nextest's "tests failed" exit (100) goes to `cargo xtask known-failing --junit`, which fails on a failure the list does not name and on a listed test that passes. Any other nextest exit (a build error, a bad filter) still fails the step at once. The tests skill says to list a failing test with its cause, in place of ignoring it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Tests: the known-failing list takes develop's 10 failing tests Develop 38fd4a4f6 (CI run 41157648345, after the SMLib eaa998a pin) fails 10 cargo tests; each is listed with the cause its failure message gives. Seven are SMLib refusals or results off their derived volumes (fillet, chamfer and shell), the cli action matrix and naming corpus among them; the two corner_g2 tests are the fitted G2 corner patch bulging past the box, which the explicit G2 corner fixes. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Reference tests: the eight cases that fail on SMLib eaa998a name their cause as known failures Develop 38fd4a4f6's Reference tests fail 34, 35, 77, 78 and 81 (STEP export finds fillet edges 4.6e-5 to 6.1e-5 off their surfaces against 2e-5), 37 (the apex blend 0.193 off), 80 (the taper-to-fit area) and 83 (thicken status 1001). Each expected.json names its cause in known_failure, which the oracle already reads: a known failure that passes fails the job. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Sweep path: a curve of several pieces is turned round whole The path chain oriented its first piece, not its first curve: a first curve of several exact pieces (a fit spline, an ellipse, a projected free-form edge) was never turned round, so a path whose next curve meets it at its start was refused as "not connected end to end". The chain now orients curve by curve: the first runs toward the second where they meet at one end only (else from the end nearest the profile), each next one starts where the previous ended, with one joint tolerance for both questions. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * SMLib: pin 2fc375f (tangency-labs/smlib#71, #72, #73) A sheet's side is extended exactly the distance asked, or the call says it cannot (#71); NVIDIA's -Werror build passes again (#72); a body splits by a sheet of several faces as it is, smlib_split_body_by_sheet (#73). The C API is ABI 6 (the new entry), so the binding expects 6. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * kernel: Extend grows a surface of several faces face by face A surface body of more than one face (a fit-point spline's spans extruded, #3830) was refused. Each face with a picked edge is now extended alone by SMLib's extension of its surface, and the faces are sewn back together, each the face it was. A side that lengthens onto a face meeting it tangent takes that face along, past its edge continuing the picked one; across a crease the neighbour grows only when its edge is picked too, otherwise the extension is refused. Faces whose lengthened sides no longer meet are refused. Up to a target keeps the pieces every grown face lies in. 3830's extensions now build; its split still fails (the tool point picks one span, and a face tool cuts with that face's surface alone), so it stays on the list with that reason. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * kernel: Split Body by a face of a smooth sheet cuts with the whole sheet A face tool cut with that face's surface alone, so a face of a surface body made of spans joined tangent (a fit-point spline extruded, #3830) cut nothing where its span ends inside the body. Split Body by a face of a surface body now takes the faces joined to it tangentially (the exact check Extend uses, within the one angle for smooth) and slices with them as they are, through SMLib's slice by a sheet (smlib_split_body_by_sheet, tangency-labs/smlib 7a01f1b), its sides those of the picked face. A sheet that only nicks the body cuts nothing, as before; a lone face, or a face of a solid, still cuts with its surface extended. 3830 comes off the booleans list. Its answer counted the two halves of the cup and not the surface that cut it, which stays as a body of its own (4879 removes its surface for that reason): three bodies, the volume unchanged. Needs SMLib 7a01f1b pinned (SMLIB_REV, prebuilt; its SMLIB_ABI_VERSION 6, which crates/smlib now expects) to link. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Tests: a cylinder strip's run-offs are 100 pi + 100 to 1e-6, SMLib's exact area The tangent and curvature run-offs of the quarter cylinder r 10 strip, 5 across the surface, are its section swept 20 along z: exactly 10 pi/2 20 + 5 x 20 = 414.159265. measure is SMLib's integration on the exact surface (1e-8), not a mesh, so the run-off check is 1e-6 relative and the 'measured on meshes' notes go. Red until SMLib's extension is solved to its distance (smlib-extend-converges 590d8a1): eaa998a's curvature run-off is 4.986 long, area 413.882. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * kernel: an extension SMLib cannot make exact says so, naming the length asked Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Sketch: a control spline can carry its own knots and weights A sketch spline over control points was always the clamped uniform B-spline over them, so a free-form edge whose knots are not evenly spaced (or whose weights are not 1) could only come into a sketch as one curve per Bezier span. A control spline now may save `nurbs`: its clamped knots and its weights. Its points, polyline, exact pieces (one a knot span; conics for a rational quadratic), the solver's distance and curvature, links, parallel re-projection and inspect.sketch all read them; a loaded design's are checked. One pending format file (spline-knots). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Sketch projection: a free-form edge comes in as the one exact spline it is A projected spline edge of several Bezier spans came into the sketch as one curve per span (#1508), so a G2 round's bottom edge was 16 curves and a path naming the corner named one span of it (#3604). The kernel now reads such an edge (a spline, or an elliptical arc of several spans) as the one clamped B-spline it is over the edge's interval, its knots and weights its own, and the sketch takes it as one control spline whose ends sit on the edge's vertices. Planar regions still read edges span by span. The 3604 case builds with its original path and leaves KNOWN_FAILING. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Fillet rig: blends past an outer rim of their faces build, on SMLib smlib-blends-past-rims The owner's ruling: a round or chamfer that runs past an outer edge of its face into open air builds, tangent where it has room and cut by the face beyond where it runs out. SMLib's branch smlib-blends-past-rims builds them by the rig's analytic answers. Off the known-failing list: the disc's rim past its 2 mm wall (190), the hole's top rim R12 past the plate's bottom, the chamfer past the cylinder's bottom (2893), each closing on the wall continued as itself, and 926's chamfer ending on the boss's wall, which now builds to its answer too. The sloped basins' R4 rim rounds (1080, mitred rounds built together where one overflows) build to their analytic volumes (to 6e-9), and stay listed with that reason: their continuity check (g1 at every blend seam) takes in the mitres' creases, G0 by the mitre ruling. 2893-chamfer-two-distances-elliptical-rim is graded as a solid (the owner: it builds) and stays listed, waiting on the ruling on unequal chamfers along a rim whose angle varies. 5158-fillet-round-just-past-a-10mm-face stays listed with its cause found: the round passes 5e-6 under the box's top back edge, inside the body's tolerance. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Naming: test that a round of a round's end has no seam with that round's faces The r1 round of a block's top edge, chained onto the end curve of the r2 round of its arc at a cylinder (rig fillets/every-block-cylinder-crease- top-edge-after-arc-round-r1), ends where it runs into the cylinder. That edge is no seam of the r1 round: the cylinder is a face of the r2 round, not of the r1. blend_seams takes it for one today (the r2 round's name F3:blend:F1:+z|F2:side holds a | of its own), and the rig reads it as a contact seam at 60 degrees. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Naming: a blend's seams split its edge's name at the | between its two faces A blend face's name holds the edge it replaced, <face>|<face>, and a side of that edge can be a blend face whose own name holds a |. Whether a face is a contact of the blend was read as the edge's name starting or ending with the face's name next to a |, so the r2 round's own face F2:side read as a contact of the r1 round F4:blend:F1:+y|F3:blend:F1:+z|F2:side. The edge's name is now split into its two faces, a blend side read whole as the two faces of its own edge. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Fillet rig: five refused blends build, off the known-failing list 926 (the chamfer ending on the boss's wall), the oblique cut's r0.1 round, the every-block r1 round (its seam with the cylinder is no contact seam, after the blend_seams fix), the up-down squares' concave chamfers and the shelled box's lip chamfer build with SMLib branch smlib-blend-refusals (f8650b8 and later). 1207 r0.5 passes SMLib's check on its rails now and stays listed for the next cause: its end rib on the boss, which starts where the round and the boss are tangent. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the trough and the pocket whose floors fall to a drain build SMLib now offsets a vertex where four faces meet (two walls and two facets at the floor's corners, four facets at the drain) to two vertices joined by a new edge (tangency-labs/smlib branch smlib-shells). Both volumes match their closed forms. The pocket's lining, hanging from the top's rim round the pocket, stands apart from the slab's outer walls with the cavity rising between them to the open top: the case says two shells in the one body. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the plate with a hole through its arc side shells open at its far end SMLib's merge now intersects the offsets of an edge's faces where they could not be mated along it (the hole's offset poking out through the half-round side's; tangency-labs/solidcore#1795): one closed valid solid with the one face open, as the owner ruled. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the ring cut frame and the up-down join shell SMLib's inset now keeps only the regions that are cavity, not the one the offsets close where they overlap (between the two faces of #545's 0.5 floor, round the up-down join's two empty octants). The frame's core under the recess is hollowed to a sealed void, so the case says two shells and its closed form, 21044 mm³. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: #616's lid shells open at a rib's side, with the 0.15 lip SMLib keeps the skirt top's offset where its loops wind the other way under the opening, the cavity's floor (the owner's ruling of 2026-10-31: build it; a lip thinner than the wall is no break-through). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Known failing tests: the action matrix's shells and chamfers as they fail with SMLib batch 7 The ring cut frame's and the up-down join's shells build now, and so do the up-down join's and modern-plastic's chamfers (SMLib smlib-blend-refusals). #616's lid in the corpus still fails SMLib's loop check, the shelled box shelled again at an inner wall is unchanged, and the oblique cut of a cylinder's fillet still fails SmSurfOfRevolution's Test #7: 3 actions of 7. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * SMLib: pin 26cc451 (batch 7: rounds past a rim, blend refusals that build, shells) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Known failing tests: the shell after a cut whose end touches an arc side builds on SMLib batch 7 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Surface fair test: the energy falls strictly, the face moves, and the edges are read after the fair Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Sketch scaling test: the first dimension sets l1 to 40 and scales both joined rectangles about the origin Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Frames tests: a pick on a moved component or an instance removes the exact round and bore volumes Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Issue 1080 tests: the rib's rounds and the mitred corner chamfers and rounds have their exact volumes Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Engine tests: lip_after_boss checks each lip's and groove's exact band, hole_as_deep_as_the_plate each hole's exact bore Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Robustness tests: lip_after_boss and hole_as_deep_as_the_plate live once, in the engine's tests.rs with exact volumes Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Engine tests: loft_cut goes; loft_spacing's hollow elbow covers its section counts and more Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel loft test: the square-to-circle loft has the oracle's exact ruled volume, without printing Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Tessellation lens test: the lens's triangles fill exactly the rhombus through its arcs' midpoints Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Pattern test: six chamfered holes take exactly five more holes' bore and chamfer rings Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel pocket floor fillet test: the corner rounds and the floor loop round add their exact volumes, by Pappus at the corners Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Shell regression: the saddle-corner shell opened on the top box's side has its exact volume Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * SMLib history test: every operand's order is the identity on its record's faces and edges Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Boolean history tests: the SMLib module's box-minus-sphere, box-minus-cylinder and box-union-box copies go; the top-level ones check more Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Modify history tests: shell, offset and thicken are one test each through the public API, with the volumes, refusals and history the SMLib copies checked Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Chamfer history test: the chamfer after each box cut is exactly one face on the painted block too Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Grid test: a pole side's face is the five triangles fanned from its one grid node, none degenerate Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel tests: the twelve ignored print-only debug tests and surveys go; coplanar_curved_booleans checks the flush-capped cylinder cuts and unions they printed Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel: the #883 board fixture generator is an example, not an ignored test Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * STEP import test: a seam sphere whose meridian stops short of the pole imports as the whole 2 mm ball Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Material tests: the nine copies in material_properties go; the persistence file checks the library copy's card and formats 20 and 21 in one loop Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Sample test: one loop checks every sample builds cleanly and without a panic; the robustness copy goes Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Known failing: the non-antipodal seam sphere import, refused for a loop of no (u, v) area Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Tests: rustfmt the board fixture example and the coplanar asserts Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the two 3871 cone cases were byte-for-byte the 258 cases; the 258 cases carry their sources Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: a volume or area can be graded as a hand-derived range where analysis only bounds it Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: fillets keeps one case per regime; 17 replications of a case in the same regime go The sloped-basin chamfers and rounds at 0.5 mm rims repeat the 1 mm rim's regimes; two of the three knife-edge chamfer tips, the r1 and box r3 curvature corners, the r1 tangent corner, the 1 mm pocket-rim and hole-rim chamfers short of the floor and the r1 together-round each repeat a kept case's regime and grades. #854 moves to 851-chamfer-arc-top-edge-9-5, and the cases that cited a dropped one cite the kept one or state its formula. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: five cases outside fillets repeat a kept case's regime and go A square cut is the slanted plane's ordinary crossing; the cam's half turn is the quarter turn's contact at a symmetric angle; the r15 slab stands inside the same coincidence tolerance as the r10; the 90 degree unfold and the 40 degree flange repeat the 72 degree and 20 degree cases' formulas. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: 3243 rim and tooth join graded on its volume (rim plus the trimmed tooth less their 0.01 mm overlap) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: 3782 emboss on a cylinder graded on its volume, area, faces and box (the wrapped 4 x 5 badge raised 1 mm) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: 3604 G2 swept-tool cut graded on a volume range (filleted box minus the swept corner section) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: 4505 coil joined through a cylinder wall graded on its volume, area and box (cylinder plus the wire's screw-swept segment outside r 76) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: 4879 window cut through a thickened spline revolve graded on a volume range and its faces Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: 4623 join of crossing pleated loft skins graded on its volume and box (both skins less their overlap) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: 831 tapered glyph extrude graded on a volume range and box (the font's S drafted in by 10 deg) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: 2357 ring of 90 cylinder segments graded on its volume and box (the segments less their 90 joint overlaps) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: 4542 fluted wall joined on a revolved base graded on its volume and box (the base by Pappus plus the fit-spline ring) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: 1985 and 2243 STEP-export enclosures graded on their volume and box (the outline less the cavity, plus gusset and standoffs) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: both 4092 loft, ribs and pad unions graded on their volume and box Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: 1525 graded on its volume (the convex body's exact 2 mm inward offset), faces and box Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: 1494 graded on its volume (box and cylinder less the 1 mm-offset cavity, sharp to rounded concave edges) and box Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: 4492 graded on its box and a volume range (the face's 19 mm sweep added, within the block's sides) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: 745 graded on its volume (the end moved 1 mm plus the spline boss's exact area), faces and box Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: 4567 graded on its volume (the revolved spline less its revolved 2 mm offset), faces and box Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the up-down squares shell graded on its volume (the columns less the 0.346 mm-offset cavity, sharp to rounded concave edges) and box Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: 545 graded on its volume (the frame less its 0.5 mm-offset cavity, sharp to rounded concave edges), its sealed pillar void and box Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the shell-again case graded on its volume (the shelled box less the 0.5 mm-offset cavity in its walls) and box Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the arc-sided plate shell graded on its volume (sharp to rounded at the hole's bottom), faces and box Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: 616 graded on its volume (the lid less its 0.5 mm-offset cavity, sharp to rounded concave edges) and box Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: 391 graded on its volume (the shelled housing, sharp to rounded at the flange, less the letters' 0.6 mm deboss) and box Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: shell/3576 was the ladder's drafted box with rounds shelled, recipe for recipe; the ladder case grades it and carries #3576 and #3573 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the two 851 chamfers of 2 graded on their volume (the cone's sweep, and its union with the front edge's prism) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the chamfered corner of the lipped shell graded on its volume (the chamfer's triangle through the wall) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the concave round into the peg's cylinder graded on a volume range (the torus it must add, the band it can't leave) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the two folded 72 degree trays graded on their volume (flat area x thickness) and the walls' reach Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the flanged rhombus graded on its volume (flat area x thickness, all four reliefs cut) and its walls' ends Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the base with two adjacent flanges and a hole graded on its volume (base, bends and panels folded) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the flange beside the ledge graded on a volume range (the flange's two readings of its length) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the two G0 window patches graded on the box the part they close keeps Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the hub's six swept grooves graded on its volume (the revolved hub less each tube's part inside it) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the cut mirrored loft graded on the box its sections pin Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the three modelled-thread joins and the fine M48 graded on their volume (the basic profile's groove, Pappus) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the oblique-cut round graded by its seams (tangent, not curvature-continuous); the flanged rhombus says what it tests (its reliefs stay apart at 60 mm) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: 3841 is 168's rim touching its coin along a circle, and 4092's reduced recipe is its report less a flange clear of the failing join; the kept cases carry their sources Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the oblique-cut round keeps its old grade until the new blend algorithm lands Its seams grade needs the continuity check to skip the body the round is not on. Fillet cases wait for the new algorithm. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: 1985's enclosure is 78 x 77 (74 and 73 inside, 2 mm walls); its volume 38063.827 by hand Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the three spline walls' face counts wait for the one-wall decision; their volumes grade them Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * STEP import: a face bounded by seams alone runs its loop the other way, never turns over A loop that uses each of its edges once each way (a whole torus within its tube and ring seams) is the same set of uses run backwards, so it says nothing of the face's side. One written clockwise in (u, v) turned the face over, against its same_sense: the torus came in inside out with a warning. Such a loop is now reversed and the face keeps its side. Test: seam_only_torus_imports_as_a_whole_ring, both orders of the two seams, volume 2π²Rr². Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * STEP import: a face bounded by a slit alone is the whole of its closed surface A loop that runs out along a chain of edges and straight back (a meridian from a sphere's pole stopping short of the other, out and back) encloses no (u, v) area, yet on a closed surface it bounds all of it less a cut of none. The reader only read such a face when the slit already ran pole to pole (and moved the sphere's frame onto it only then), so the 2 mm ball whose meridian stops at 2.5 rad was refused for its empty loop. The slit is now made the face's seams, so its loop bounds the surface's whole domain: on a sphere, a revolution whose profile ends on its axis, or a spline closed round u that collapses at both ends, the slit's meridian is run on to both poles, out and back (a sphere's frame put on the slit first, whichever two points it joins); on a torus, the circle the slit lies along is closed and the other circle through its start is the second seam. The seams on a sphere are its own meridians (angle 0 on the equator), so their pcurves are exact lines on its form. Tests: non_antipodal_seam_sphere_imports_as_a_whole_ball passes (its known-failing line goes); seam_only_torus_imports_as_a_whole_ring adds a torus bounded by a slit along its tube. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Rig: the test-peg's concave arc and front top edge rounded together stay within the body's box A new fillet case, report-fillet-concave-arc-and-front-top-edge-together-solver-residues: the reported part's bar (with the sketch solver's residues) whose sides run tangent into the cylinder, its concave arc and front top edge rounded r2 together. The plane of the front face bounds the whole body, so every blend lies within the unblended body's exact box (SMLib's tight box); graded to 4e-5, the corner patch's own tolerance. On SMLib 2fc375f the corner patch stands 0.0374 out of the front face (box y min 0.0205): listed in KNOWN_FAILING. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Rig: the test-peg corner at r5 and r7 Two more fillet cases, the reported part's concave arc and front top edge rounded together at r5 and r7, with the same exact-box containment check (graded to 4e-5, the corner patch's tolerance). On SMLib 2fc375f the corner patch stands 0.128 (r5) and 0.230 (r7) out of the bar's front face (box y min -0.0699 and -0.1723): listed in KNOWN_FAILING. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Rig: blends that end where their face runs tangent into another Fifteen fillet cases on the test-peg's shape with clean numbers: a bar 40 x 16 x 10 whose far end is a half disc R8, a disc R8 standing 10 on its top, joined, so the front face runs tangent into the cylinder along x = 40 and the front top edge (convex) meets the concave arc of the top tangentially there. Each blend ends on a face tangent to the one it rolls on. - Rounds: both edges together at r2 and r5; one after the other in either order at r2, and at r1.5 and r3; the front edge alone as a curvature round, whose end on the cylinder is a semicubical cusp. The containment invariant (the unblended body's exact box, to 4e-5) and G1 seams, or the analytic volume where the blend has a closed section. - Chamfers: the front edge alone and the concave arc alone (analytic volumes: the section along x up to the wall, the cone's spandrel ring clipped by the sides), both together, and one after the other (1 then 2). - STEP: the peg written to STEP and read back, its front edge rounded (analytic) and both edges rounded together. - A cone: the peg drafted 5 deg, whose front face runs tangent into a cone along a generator, its front edge alone and both edges together. The quadratures are tanh-sinh, converged to 1e-13; SMLib's own volumes of the passing analytic cases agree to 4e-9. A sphere is left out: a plane meets a sphere tangentially at a point, not along a seam, so it is not this ending. On SMLib 2fc375f eight fail, listed in KNOWN_FAILING: every chamfer that ends tangent (status 1001, SmFilletNx1Corner), the two rounds together (the corner patch 0.0374 at r2 and 0.128 at r5 out of the front face, and the rounds meeting with normals 180 degrees apart where their contact lines on the top cross), the same on the STEP-read peg (status 1001) and on the drafted peg (its corner refused as unsupported). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Rig: fillet corners graded curvature-continuous, the default to be Six fillet cases that pick their edges with no type, so they take the fillet's default, which the owner has ruled is to be curvature-continuous (G2) at every corner, with circular rounds kept as an option. Each grades every seam of the rounds and of the corner patch G2, on one valid body: - an oblique convex corner (a block drafted 15 deg); - a four-edge and a five-edge apex corner (pyramids lofted to a point); - a pocket's concave corner; - a mixed corner (a step: one concave edge, two convex); - a corner beside a cylinder (the top corner of a half cylinder). All six fail on SMLib 2fc375f, listed in KNOWN_FAILING: today's default is the circular round, whose seams jump in curvature by 1/r. On the five-edge apex the corner patch also meets two rounds at 8.45 degrees (G0). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Rig: the test-peg's front chamfer builds With the SMLib fork's smlib-tangent-ends (a rail's end on its side edge is the rail/edge crossing), report-peg-front-chamfer-d2 passes. Its line leaves KNOWN_FAILING, for the pin that carries that fix. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Rig: the curvature-continuous corner cases pick the curvature fillet The six corner cases added in 3a854104a took the fillet's default type, on the premise that the default would become curvature-continuous. The default stays the circular round, so each case now asks for the curvature fillet itself (type curvature: curvature-continuous sections and corner patches) and keeps its grading: every seam of the rounds and of the corner patch G2, one valid body. They are renamed from cov-fillet-g2-default-* to cov-fillet-g2-*. The oblique three-edge corner (a block drafted 15 deg) and the pocket corner pass. Four fail, as KNOWN_FAILING now says: - the corner beside a cylinder: the curvature fillet builds its sections only between planar faces; - the four- and five-edge apex corners: refused because the default setback is shorter than where the rounds' contact lines meet (3.90 and 3.51 mm from the apex); - the mixed corner: SMLib sets back a corner only where its edges are all convex or all concave. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Rig: the test-peg's concave chamfer, alone and after the front chamfer, builds With SMLib's tangent end as an event of the fillet's trace (blend-end-event 6d73e4f), the concave chamfer's rail on the cylinder ends where it crosses the seam along which the front face runs tangent into the cylinder, continued past the vertex, and its end rib on the front face is built from there. report-peg-concave-chamfer-d2 and report-peg-front-chamfer-d1-then-concave-chamfer-d2 pass and leave KNOWN_FAILING. The two chamfers together still fail, now at the mixed-convexity corner where they meet: its line says so. Rig against SMLib 0cc48bd: no area regresses (963/993 pass, 961 on a87c502), ladder 168/168, kernel lib only its listed failures. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: constant rounds of the exact classes, and a tee's round A plane cutting a cylinder or a cone at an angle, a sphere or a cone coaxial with the other face, a cone and a cylinder touching one ball, two pipes touching at a point: their rounds' centre lines are rational, so the rounds are rational surfaces of degrees fixed by the construction ((4, 2), (2, 2) revolved, (6, 2), (12, 2)). The tee's centre line is not rational; its round is graded on its volume. Volumes from the divergence theorem over the exact pieces, at rel 1e-6. The six that SMLib 0cc48bd traces are listed in KNOWN_FAILING with what they come out as. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the exact-class rounds pass on SMLib's classified exact rounds The rounds now come as the rational surfaces their classes give, closed ones as two faces split at their seams, the touching pipes' as four: one splines entry a face, each of the class's degrees. Their KNOWN_FAILING lines go. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * SMLib: pin 7ac037e (the new blend's tangent-end event, zero-speed G2 ends, and its exact-class rounds) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the fillets known-failing list is the 22 cases that fail on SMLib 7ac037e Twelve listed cases build on the new blend's end event and exact classes, or were already built on develop: they come off the list. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: #316's bottom rounds as large as the wall, or larger, shell with a step wall at the opening, not refused Where the round meets the open bottom the cavity's wall steps down along the bottom's normal, so the round meets it at 90 degrees and the opening is exactly the picked face. The cases are renamed and graded on the exact volumes, and come off the shell known-failing list. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Merge fixes: every crate and test target compiles on the merged tree, but for crates/geom's hlr world_state, view::bounds, home_camera and scene return Result on develop; new main code takes that with ? or session_world. New fixtures carry the spline's nurbs. ForeignCopy::of returns Result. occurrence_placement_with walks the path with its moves, since the placement index holds pending_moves only. The hlr port is separate and still to come: this commit does not compile as it stands in crates/geom/src/hlr. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk * Drawings hidden lines: read develop's B-rep records Edges come from the record's edge list, cut to their interval (C3::of_edge), and faces from its face list; a cylinder, cone, sphere or torus chart takes its bounds from where its NURBS form lies on its label (S3::of_face). A rigidly placed revolution has main's revolution chart; other placements stay refused. Moving a body to its centre goes through Brep::moved. Loops are read against the natural normal of the face's parameters where a chart wraps. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk * Hidden-line fixtures: build develop's records from the fixtures' data Fixtures keep their bounded curves and surfaces and their own edge numbers; a private builder makes the canonical record, and the local prepare puts the edges back in the fixture's numbering. Assertions are unchanged. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk * Hidden lines: tests of the bounded edges, face charts and placed revolutions Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk * drawing-hlr doc: what is drawn and refused on develop's records Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk * hlr tests: a placed revolution is refused when its placement is not rigid The new model has one record for main's Revolution, which was drawn, and its PlacedRevolution, which was refused. An identity placement is now the former, so this test's fixture takes a non-rigid one. The refusal it asserts is unchanged. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk * Hidden lines: a traced intersection is drawn only where its spline lies on both surfaces A leader off either surface is refused like a curve with no spline to follow. Tests: a traced rim drawn on the circle and plane within tolerance, the same leader 1 mm off refused, and kernel bodies with arcs through the production prepare against closed forms. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk * Hidden lines: kernel bodies through the production prepare against closed forms Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk * Tests from main: the world state is a Result here Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk * A blend's pick measures close edges on their curves, not their polylines A polyline can be a chord off its edge, more than two edges are apart near a tangent point. A pick exactly on a ball's rim took the straight edge the rim is tangent to, and solidcore built a chamfer of that edge with a clean check. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk (cherry picked from commit c786db6bf49804fb83a02f0eb7f83bd9f82fa643) * Merge fixes from the first SMLib test pass Model cache key covers the crates develop's kernel adds under doc (profile, smlib, step). A piece taking a name also takes the feature that made it: SMLib lists a cut's pieces in another order, and the swap left the name on a piece of the wrong feature. A replaced analysis keeps its status slot. A command with no world picks does not place the model first, so assembly.mass_properties answers for a flattening placement. FeatureCommon loses the touching key the merge added; only the contracts that read it take it. Two of main's tests listed as failing on SMLib, with why. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk * Merge fixes from the ui test pass and the gates Main's thread.direction keys go with develop's thread hand, which replaced them. Vietnamese for the messages develop added while main made vi a complete catalog. CGA and 1-bit themes set develop's comb and section hatch colours. A ribbon button with a persistent effect is pressed only while its tool runs, so persistent_ribbon_pressed alone decides how its effect is shown; other analyses stay pressed while on. Two of main's ui tests listed as failing on SMLib, with why. Gates: fixed thread tables become slices, one collapsed if, rustfmt. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk * A silhouette takes its facing from the surface's normals A flat triangle beside the outline can tip the other way from the surface it approximates, and its edges joined the outline. On SMLib's sphere that made 192 segments instead of the equator's 64, 100 curves and 95 profiles from the tight fit of #7989. Each corner's normal is used where it is close to the triangle's own; a mesh without such normals (none, zero, not numbers, or averaged across creases) keeps the triangle's normal, as before. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk * Clippy and rustfmt on the merged tree Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk * Stepwise open checks every feature under the session's mode OpenSteps::start evaluated under the default check mode, and finish kept those results under the session's mode: an each_step or off session opened in steps recomputed nothing. start now takes the mode (the app passes its session's), and a mode that changed before finish evaluates the design again under the new one. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz * Clippy without SMLib: the planar-sheet edge reader is built only with it Its one caller is in the smlib-only sheets module, so without the feature it was dead code and clippy -D warnings refused the kernel. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz * SMLib: pin d01d7b0 (the new blend's one Gⁿ section generator: the chord, circle and curvature sections, and the variable rounds as the union of their balls) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the section orders, chord, circle and curvature section, on planes and against a cylinder Eight fillet cases for the blend's cross-section by its order of contact with the faces, each graded on its analytic volume at rel 1e-7 and its exact continuity (the order, and not the next): - a box's top back edge chamfered 3 (G0), rounded r3 (G1) and curvature-rounded 3 (G2): the areas cut off the corner s^2/2, (1 - pi/4) s^2 and 113/756 s^2, the last by the default thumbweight's definition; - a pipe R10 dipping into a plate, its concave edge chamfered 2 (the chord between the contacts of the ball SMLib rolls for that setback, radius 1), rounded r2 and curvature-rounded 2, each section's added area by Green's theorem along the plate, the section and the pipe's arc; the order-2 section is built from the faces' feet of the point at distance d from both, which on the pipe are not linear in d; - a boss root curvature-rounded 2, the square corner's section revolved (Pappus); - a variable round r1 to r5 along a box edge (rel 1e-5): the balls' envelope is a circular cone, and the volume is the cone's sections integrated along the edge. Three fail today and are listed: the two curvature rounds whose faces are not a square corner of planes (SMLib's quintic blend curve, not the order-2 section: rel 6.5e-7 and 1.2e-5) and the variable round (great circles, not the envelope's: rel 4.8e-5). The other five pass on SMLib 7ac037e. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the curvature fillets' expected bodies from the order-2 section at thumbweight 0 SMLIB_BLEND_CURVATURE's section is now the order-2 G^n section at thumbweight 0. Between two planes square to each other it cuts A = 0.154192655384275 s^2 off the corner, its first moment about either face 0.0291753295725360 s^3 (Green's theorem on the section): the curvature cases built on that corner (862, 2708, every-box-edge, every-hole-top-rim, every-l-bracket, every-block-cylinder-crease, the three-edges-at-bar-corner reports, 3604's fillet) take their volumes from it by their own methods, the peg's front blend 23.3237146876 (its section along x up to the wall). Between planes the section's t^3 term vanishes (their feet are linear in the distance): the box edge case is exactly G3. The boss root is a certified fit, G3 to the plate and G2 to the wall at Continuity Analysis's tolerances: at least G2. The boss root and the pipe on the plate pass on SMLib's section and leave the known-failing list. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Curvature fillets: the section's default thumbweight is equal area, so the round's volumes are the circle's On the round's rails the order-2 section takes off what the ball's circle does: (1 - pi/4) s^2 at a square corner, first moment 0.0474559669443 s^3 (w = -0.5252123889). The kernel and engine tests and the curvature rig cases take their volumes from it by their own methods; the pipe on the plate from its own wedge (70.52878 degrees, w = -0.8544103493). The G2 corner patch's seam test is listed until the corner step. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: four G2 corners wait for the corner step: their patch meets the new section's rounds G1 at one face seam Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the turn at a corner of two rounds, Mitre (the default) and Swept, at a pocket's floor and a boss's base, by exact volumes A round's spandrel A = (1 - pi/4) r^2 and its first moment about its wall M = r^3 (5/6 - pi/4): Mitre adds L A -+ 2 M per edge (cut at, or run on to, the corners' bisector planes), Swept turns the section about a convex corner's edge, (pi/2) M a corner, and refuses a concave corner rounded less than the ball. The pocket's tangent chain round its R3 corners is a torus each. Graded to 1e-7, where Mitre and Swept differ by 6.6e-6. The Swept cases are listed until solid.fillet takes a turn. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: a junction family: oblique wedges 30 to 150 degrees rounded and chamfered (exact), bosses upright and tilted, pipe tees and a Y junction Four are listed with their causes: the equal-pipe tee (its exact conic-pair rounds meet at the ellipses' crossings in a corner the old corner code cannot join), the tilted bosses (1001, before the blend rework too) and the Y junction (refused for room at its triple points). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Variable rounds: graded by the union of their balls (their envelope), not the balls' great circles The smlib crate's laws and ladder 005, 006, 007 and 012 take the volumes the balls' envelope removes; the law with a corner is its own test, listed as failing until the corner step. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel tests: variable rounds graded by the union of their balls, the removed volume to 1e-4 of itself removed_by_balls integrates, in each plane square to a right-angled edge, the corner the union of the balls leaves (by rays from the edge, the least entry over the balls), cut to the body's section. The law with a corner through a middle point is its own test, listed as failing. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel tests: a spline radius whose balls fold over one another at its peak is refused Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the variable round on its cone passes (the round is the balls' envelope) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Tests: three rounds of different radii at a corner listed: the corner's transition kinks with the balls' touch circles Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Ladder: the variable rounds graded to 1e-6 by the union of their balls; 012 by its law going on past the edge At the default 1e-3 the great circles' volumes (4e-6 off) passed too. SMLib builds each within 1.6e-7. The golden takes the new volumes and areas; counts unchanged. The G2 corner test listed as failing passes on SMLib's step 3 and leaves the list. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Reference tests: the variable rounds 77, 78 and 81 pass on SMLib d01d7b0; their known-failure marks come off The new section builds their edges on the surfaces, so STEP export no longer finds them 4.6e-5 to 6.1e-5 off. develop's Reference tests (60393a718) report all three as passing while marked. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * STEP import: a ball's halves whose seams are off each other's quarter lines each form within one turn A sphere split into two halves along a circle about its axis, each half covering a pole with no seam, gets a seam per half from the first vertex of its loop to the pole. The circles between the halves group their frames so they turn together, and when the two seams are not a whole number of quarters apart no one turn fits both: the group kept its frames, a half's form ran past one turn, SMLib's trim (SMLib and solidcore alike) across the form's end crossed the face, and the mesh folded over the ball (a rotor's ball showed torn; its half had 196 times its area in triangles). When no one turn fits the group, each spilling face is now turned on its own to start on a quarter line. On the rotor file this also clears three other faces that were filled leniently and a 0.076 mm edge gap; regression test in step_in/tests.rs with the area and volume of each half. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz (cherry picked from commit b3188e005d427043b918267449c2336a1777e54f) * SMLib: pin 5e8c9c1 (the new blend's corners: Ball and End/Join; exact fold and room checks with fit sizes; overflow in place; the round as its definition) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel tests: a law's dip shows its corner ball's sphere, a peak's two rounds cross (the reasons had them swapped) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Reference tests: the variable rounds 77, 78, 80 and 81 expect the union of their balls A variable round is the envelope of the balls rolled along the edge, which takes less than a quarter round in each section. The expectations are now that union, the law continued past the edge's ends along its end slopes, integrated by Gauss-Legendre panels in x and t; 2, 4 and 8 panels agree to 1e-9 of the body's values, and 77's removed volume matches a brute-force union of balls to 2.5e-10. The nearest-ball search now scans the balls the ray meets around ball x (|x - s| < r(s) sqrt(sin 2t)) on their own, which near the faces and where 78's radius closes to 0 are narrower than the global scan's step. Regenerating keeps each case's known_failure. 79, a constant radius, is unchanged. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Known failing: the law corners' kernel and crate tests and rig 1207 pass on SMLib 48ea616 SMLib builds a variable round's law corners as its balls' union (the corner ball's zone at a dip, the sides' crossing at a peak): the kernel's corner through a middle point (39.5410) and the crate's 4 -> 2 -> 4 law (39.5421) pass. Rig 1207 (the bar's top edge rounded after the boss's arc, r0.5) builds and grades on the same SMLib; it failed on c820346. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: every fillet and chamfer case rounds its tangent chain The owner's ruling of 2026-11-01: the rig and the ladder round with tangent_chain true, how a user's default pick behaves. The 38 fillets-area recipes and the ladder's 07-fillets/016 and 018 that passed false now pass true. The shell recipes keep theirs: a shell's tangent_chain is its open-face chain, a different feature. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel rig: the partial-selection cases kept as -partial-chain copies, tangent chain off Where a case's point is one edge of a tangent chain rounded alone, a copy keeps tangent_chain false as its own case (SMLib rounds exactly the picked edges, ending at the smooth vertex); their expectations stay as they were, to be re-derived: - fillets/1207-fillet-box-end-edge-into-unblended-round-partial-chain; - fillets/every-fillet-after-fillet-curvature-front-then-side-r3-partial-chain; - fillets/1207-fillet-bar-top-edge-after-boss-arc-round-partial-chain, renamed from ...-no-tangent-chain: with the chain on it is exactly 1207-fillet-bar-top-edge-after-boss-arc-round, which the rig already has; - ladder/07-fillets/020 and 021, the r5/r3/r7 and r5/r3/r2 corners (016 and 018) with the r3 on its edge alone: with the chain on, the r3 runs on along the r5 round's end arc and down the vertical edge the third round was to take. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel rig: the concave arc between the block's tangent sides kept with tangent chain off fillets/every-block-cylinder-tangent-concave-arc-r2-partial-chain: the pick takes one piece of the concave half circle, which SMLib splits; with the chain off its other pieces are left out, and the blend is refused at the piece's end (the base gate's outcome). With the chain on the case rounds the whole half circle. The copy keeps its expectation, to be re-derived. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel rig: two chains that now build graded by their exact volumes With the tangent chain on, two cases round more than the edge they pick, and their old expectations were the single edge's: - 1207-fillet-box-end-edge-into-unblended-round: the r1 chain is the end face's top edge, the r3 round's end arc and the back upright; 34 A + (pi/2) A (3 - c) by Pappus on the arc: V = 7953.139216 (it built 7953.139216, the old 7957.505 passed only inside 1e-3), 10 faces. - 851-fillet-top-front-then-front-left-upright: the upright's chain runs up the first round's end arc on x = 0 and along the left top edge, so the corner becomes the R2 ball's eighth: V0 less the first round's spandrel to the wall (35.344727) less 27 (4 - pi) + 2 pi/3: V = 9530.777979 (built 9530.777987), 10 faces. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel rig: a curvature chain round a round's end refused for its size; the concave half circle builds - every-fillet-after-fillet-curvature-front-then-side-r3: the side edge's chain runs round the first curvature round's end curve, whose radius of curvature has a weighted mean of 3 (its setback) and is unbounded at the ends, so somewhere below 3: the size-3 blend's contact line folds back on itself. Refused, "larger than the faces beside its edges allow", as ladder 07-fillets/016's r7 on the r5 arc. (It was solid or refused for running on tangentially.) - every-block-cylinder-tangent-concave-arc-r2-no-tangent-chain: the chain takes every piece of the half circle and ends at the convex edges it runs on into; it builds the analytic 19091.9620, so the outcome is solid (the refusal alternative was the chain-off one's). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Known failing: two 851 chains whose corner piece is a ball of tube-centre radius 0 851-fillet-arc-then-top-front and 851-fillet-top-front-then-upright: with the tangent chain on, each R2 chain runs along the end curve of an R2 round on a curved face (the arc round's end on the front face; the first round's end on the wall), where the rolling ball sits on that round's own centre line, so the piece is the ball about (39.2538, -19, 8): the three-edge rolling-ball corner. SMLib fails with status 1001; the same piece on a plane end arc builds (front-left upright). Expectations unchanged. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Ladder: 016 and 018 refused, their r3 chain takes the vertical edge; 020 and 021 recorded With the tangent chain on, 016's and 018's r3 runs on along the r5 round's end arc and down the vertical edge, so the third pick (60, 40, 8) is 3 from both of that round's contact lines and names no edge: refused, asking for a point along one edge. The corners they were made for are 020 and 021 (the r3 alone), whose golden entries are 016's and 018's (021 measured on f12a101). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel tests: three rounds at a box corner end on one rational patch on the ball's sphere, not an analytic sphere SMLib's Ball corner is always the rational patch exactly on the sphere (owner ruling, blend design §23), so the corner counts as an 'other' face beside the three cylinders and six planes. The removed volume still checks the corner against r³ − πr³/6. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel rig: the curvature round on a pipe on a plate is listed: a seam grades G3 where exactly G2 is wanted Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel tests: the box-and-fillet wire fixture records the round's cylinder frame as SMLib now keeps it The round's cylinder keeps the frame it was made on when it is turned (SMLib's SwapUV no longer re-derives it): its origin sits at x = −20 on the same axis line, (x, 2, 8) along x, radius 2. Same cylinder; one number in the record moves. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Known failing: two kernel tests' reasons as they fail on SMLib 5e8c9c1 (a partial selection running into an unblended tangent edge) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel rig: two curvature rounds get 600 s, past the 180 s default, while G2 certification is slow (tangency-labs/smlib#96) On the CI runners the boss root and the hole rim, both size-2/size-1 curvature rounds, build correctly but take more than 180 s: the order-2 section's span certificate and the round's definition are evaluated station by station. The per-case limit is the one the thread cases use. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Lid ring sketch test: find the ring under the pick, not by main's kernel's name On SMLib the lip join's exact history names the lid underside's ring a piece of the lid's own start (F14:start#[...]), as the naming rule says for a face that came from the feature's input; main's kernel named it after the case's top it rests on (F2:top). The test looked the ring up by that name and so stopped before the attachment it guards. It now takes the underside piece under the pick point, which the cap certificate attaches on either kernel. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz * Viewport culling test: each box's triangles from its mesh, not 12 SMLib meshes a 10 mm box in 108 triangles, so the hard-coded 12 a box stopped the test before it reached the culling. The expected counts are now each body's span in the scene. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz * Timeline chip test: a fillet that really reduces The R20 fillet with fit reduce on one top edge of a 10 mm box builds on SMLib without a reduced-radius warning, so the fixture had no warned feature. It now rounds the four vertical edges at R6, reduced to the full round (5), as the copy-warning test beside it does, and checks the warning says so. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz * Oracle: 34-chamfer-then-fillet and 35-fillet-curved-curved pass on SMLib 5e8c9c1 (their STEP edges are on their surfaces) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Known-failing: the shell of a fully rounded box opened at one face fails on SMLib 5e8c9c1 (tangency-labs/smlib#102) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Known-failing: the action matrix's oblique cylinder cut fillet passes on SMLib 5e8c9c1; two shells still fail Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel rig: the boss root's curvature round gets the rig's 1800 s cap: on the CI runners, 8 cases at a time, its G2 certification passed 600 s (tangency-labs/smlib#96) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel rig: a case's continuity can ask for an order per seam (seams: [{order, edges, exact}]) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel rig: the pipe on a plate's curvature round meets the plate G2 and the pipe G3, 40307.8856312 (option B's order-2 jets, tangency-labs/solidcraft#10845) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Edge names: a seam names its one face once; the curve-id test reads every edge kernel-neutrally A seam's two sides are the same face, and edge names list each face an edge bounds once, so SMLib's extruded circle names its side's seam F2:side:c1, with no separator. The name grammar now says one face also means a seam. The #5858 test no longer counts one '|' an edge: every part of every edge name is a whole face name of the edge, one per face it bounds, two for the rims and one only for the side's seam (checked to run bottom to top on the circle). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz * rustfmt on the merged tree Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz * Known failing on SMLib: two of main's new tests assume truck's box mesh and fillet torus Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz * SMLib: pin f916a8d (a round on a definition face is its definition; the G1 setback fill certified convex, setbacks too short refused naming the least; the G2 certificate halves a span no level can certify at once) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Fillet: a setback too short for its corner is refused naming the least that builds (smlib_blend_fit_size) SMLib's setback corner takes a G1 fill only once certified convex, and refuses a setback too short for that as SMLIB_ERR_NO_ROOM with SMLIB_FIT_SETBACK_AT_LEAST, the smallest setback that builds. The kernel reads it (solidcraft-smlib binds smlib_blend_fit_size) and names it; the Fillet dialog says it in plain words. Other room refusals keep their words. The r5 box corner set back 5.5 is refused naming 5.962, which builds. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel tests: three rounds of different radii at a corner meet in SMLib's setback corner Each round runs whole to its section square to its edge at its setback (the owner's rule, at least 1.5 r, scaled to the least at which the G1 fill is certified convex), and the hole is the setback split: one patch per round and the triangle in three quadrilaterals, 15 faces, G1. Outside the box the sections span the body is the three strips', so its volume is theirs within that box's. A later r3 round at the mitred corner makes the body all three at once make (7928.142563938, 15 faces), as the engine and the model-cache tests have it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel tests: SMLib's own corner between curvature rounds is curvature continuous, as the G2 patch is Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel rig: the boss root's and the hole rim's curvature rounds take the default timeout again (37 s and 34 s on the box under the rig's parallel load, tangency-labs/smlib#96) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Agents: model decisions use exact geometry; a mesh is for display, export, previews and mesh bodies Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * xtask: mesh-decisions, model decisions use exact geometry; today's 176 mesh decision sites are listed and the list only shrinks Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Sheet metal: cuts and holes pass over sheets and bends by their exact boxes, never a mesh's A primitive cut skips the sheets kernel::apart (exact bounds grown by the record tolerance) finds clear of its tool; the bend check leaves the clear case to kernel::boolean, which answers it from the same exact boxes with no intersection work. The mesh-box helpers are gone, and their four lines leave xtask/mesh-decisions.txt (172 sites left). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Agents: AGENTS.md loses a stray merge-conflict marker line at its end Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Locales: Vietnamese for the setback-too-short refusal, now that vi is a complete catalog Main made vi a complete catalog; develop's new message (ui.fillet_error_setback_short) had no vi entry, so every_complete_catalog_carries_every_english_message failed on the merged tree. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel rig: exact volumes for 1213's bent-tube round and 4782's bar round, rel 1e-6 1213: the loft is a cubic skin through the five sections (ellipses between them), not a torus; its volume 131601.597487935 by quadrature less the exact rolling-ball removal 233.662461919 gives 131367.935026 (was a Pappus estimate on a torus, 131360.148, at rel 5e-4). 4782: the section's area in closed form, 25 pi/3 - 5 sqrt(75) + 25, so V = 630.2934873 (was a grid estimate, 630.293125). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz * Kernel rig: the boss root's and the hole rim's curvature rounds take 600 s again: under CI's parallel load they pass the 180 s default (develop 820b7b6) They take 37 s and 34 s alone on the box, but CI runs 8 cases at once on slower runners. Their G2 certificate cost is the open item (tangency-labs/smlib#106, moved to solidcore#2344). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * After the merge: clippy's auto-deref, and the mesh-decisions list for the merged tree Develop's list was taken on develop alone. Main's code (tap-marking reach, cut and hole box checks, join pieces, print faces, placed measuring, selection items, imported mesh payloads) and the branch's own exact_edges and named_vertex use meshes too; three listed functions were renamed by main (face_outline and plate_recesses into FaceSlice, paste into build). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz * After the merge: main's new tests on the SMLib kernel - Cut To the far side of a curved wall (#8634): the tool stops past the first crossing of the face ahead of the profile; SMLib's whole bore is one face that a line crosses twice, so the single-crossing rule found none and the cut took nothing. - Clearing view analyses goes through refresh_display, as main's #10687 made the others, so an open feature editor keeps OK and Cancel after Zebra. - vi, a complete catalog on main, gets the setback-too-short message. - fillets/KNOWN_FAILING: 4782's cause is now its continuity check (SMLib f916a8d builds the expected volume). - Known failing, as main's tests assume truck: the spline wall's spans as one mesh patch, a hole touching an edge at a point leaving one body, and a copy of a copy's triangles matching a fresh mesh. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz * Twisted sweep: circles about a straight path are exact cylinders (solidcore#2184) A twist about a straight path maps a profile circle centred on the path's line onto itself, so its swept wall is exactly the cylinder. The skin through the stations stayed within 3.9e-9 of it (6.6e-9 on the outer wall), and a boolean with another body on that cylinder failed with status 1001 (solidcore#2184; the kernel's handling of a B-spline face lying on a cylinder stays open there). sweep_controlled now builds those walls exactly when the path is lines along the profile's normal and there is no end scale or rails: a profile whose every loop is such a circle is swept untwisted, and such holes in another outer loop are cut as exact cylinders from the skinned sweep of the rest. Other loops, and an axis-centred arc inside a loop of other curves, are skinned as before; a failed cut falls back to skinning all. Regression test in smlib_sweeps_tests.rs: #2184's tubes joined at 10, 16, 18, 20 and 30 degrees give one closed body of 11.5625 pi with cylinder walls; a twisted hexagon with the bore keeps a cylinder bore. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SdcgEtwSrdwZxqTQp5MfnU * After the merge: a hole that misses is found by exact boxes; a face is a one-face patch; main's mesh-box helpers gone - `hole_misses` (main's #10701, through brett's branch) decided from the targets' mesh boxes. It now uses their exact boxes (`Body::exact_bounds`). An unknown box still leaves the hole not known to miss. - With #10303's two shortcuts and `hole_misses` off the mesh, `body_box`, `mesh_box` and `padded_box` have no caller left, and are deleted. - `project`'s intersection link passes its one face to `meeting_edges` as a one-element patch. This branch picks one face, not #9009's mesh patch. - xtask/mesh-decisions.txt drops the six sites that no longer use a mesh here: `apply_traced_with`, `cut_end_past_face`, `beyond_cylinder_reach`, `hole_misses`, `body_box`/`mesh_box`/`padded_box`. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * After the merge: split_move's Result reaches its callers; to_local's duplicated move check goes `frames::split_move` returns a Result on this branch: an unplaceable model is an error, not a silent no-split. - Move/Copy of a component (main's #9914) propagates it, as its other calls do. - `to_local` had the solid.move check twice after the merge (brett's Option one and ours). Ours stays, after the no-picks/not-placed return. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * After the merge: main's two new tests take world_state's Result, as the rest of their files do Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Native B-rep: a ball patch is its own surface kind, read from and written to SMLib's flat kind 6 SMLib's flat arrays now carry the corner of three equal rounds as `SURFACE_BALL_PATCH` (kind 6): its net as a NURBS face's block, with its sphere's centre and radius as its definition (ids 36 and 166). The record reads it as `ball_patch {center, radius}`, a label like the analytic kinds, with the net as its `nurbs`. A plain sphere with a form won't do: the net is not a piece of SMLib's sphere NURBS, so SMLib's `IsNurbSurfaceSphere` would refuse it. Written back, a ball patch is kind 6 with the same definition, which SMLib takes once its net is certified on that sphere. Elsewhere: - Offsets classify it as its sphere, so its offsets stay exact and collapse at the centre. - Face kinds count it as a sphere: fillet_three_edges_at_a_corner's corner is now `sphere`, no longer `other`. - STEP, which has no ball-patch entity, gets the net as the face's B-spline surface, pcurves included. - Iso curves and SSI of the label are refused; the face's form is what evaluates. Test: a_rounded_cubes_ball_patches_go_round_with_their_spheres. The cube's eight corners are ball patches about the corners pulled in by r. Points of each patch lie on its sphere to 1e-12. The patches are kind 6 again after import, with the same definitions bit for bit, and the closed-form volume holds. Format: pending/ball-patch-faces.rs. Docs: docs/native-brep.md and the rig README's `surface_types` (`ball_patch`). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * SMLib: pin v1.1.0-alpha (a18bbe5): the generic blend's step-4 corners, the Ball's sphere patch through the flat arrays, all-target CI Since f916a8d: - #120: every target again, plus the warnings fix; - #121: the Ball's patch as flat kind 6 with its sphere, read by the previous commit; - #122: tests gated on counts; - #123: the Mixed corner; - #124: the End at a smooth vertex; - #125: four or more rounds, and open setbacks; - #126: the equal-area thumbweight guard; - #127: the trunk merge. The SMLIB_PREBUILT checksums are from the release prebuilt-a18bbe5…, written by `scripts/fetch-smlib.sh --pin`. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * smlib export tests: rustfmt's line for the rounded cube's edge midpoints Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel rig: the fillet and ladder results on SMLib v1.1.0-alpha, the new failures recorded with their reasons Fixed (off the known-failing list): the Mixed corner's peg cases and the concave arc with the front top edge (smlib #123), and the 40° boss junction (smlib #124). Eight cases in all. New failures, recorded as they are, each with its reason. They passed on f916a8d. - **Six cases grade a blend seam G0 where G1 (or G2) is wanted,** at the end of the round's contact seam, after smlib #124's End at a smooth vertex. Two of them also shift in volume. - **Four cases come back unsupported** after smlib #125, which leaves setbacks to the Setback's corners only. - **Ladder 07/012** makes 9 faces, 20 edges and 13 vertices, where its golden had 8, 18 and 12. Its golden entry is the new result, with the reason added. Whether each change is by design or a defect is being established. A defect is fixed in solidcore, where the End and the Setback are being brought over (#2364, #2365), not in the frozen SMLib. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel ladder: 07/021 and 06/018 recorded as they are on SMLib v1.1.0-alpha, each with its reason Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel ladder: a golden case marked unstable is gated on its status, and 06/018 is marked On SMLib v1.1.0-alpha, 06/018 makes 597 or 594 edges from the same input: the union's post-process keeps pointers to edges it has deleted. A golden entry's `unstable` reason makes the gate compare that case's status only and name it in its output; recording keeps the reason, and only an edit of the golden removes it. v1.1.0-alpha.1 fixes the cause and removes the mark. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * After the merge with main: its new code on develop's exact bounds, types and thread fields - The sheet cut's cull (#10301) and the tapped wall's (#10227) use each body's exact box (`exact_box`), not its display mesh. - model.threads replies with develop's thread fields: form, hand (right, left or both) and starts. - surface.boundary's schema checks a network curve's continuity as the handler does, and words a list entry's error as it does. - Main's new tests take develop's Hole fields and world_state's Result. - mesh-decisions: contact_sweep's triangle check is now `depth` (main split `hits`). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Known failing: the 14 cargo tests SMLib v1.1.0-alpha fails, with what each sees; two cases that pass now Develop's CI after the a18bbe5 pin (run 41522001173) fails 14 tests that passed on f916a8d, and passes two listed ones. Each new line says what the test sees on v1.1.0-alpha; v1.1.0-alpha.1 fixes the setback hole's cause. shell_tangent_chain_that_opens_every_face_explains_how_to_keep_walls and oracle 37-pyramid-apex-blend pass and leave their lists. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Cargo.lock: develop's profile, smlib and step crates at main's 0.30.1 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel rig: main's six new sketch-only commands are exempt from a kernel case sketch.construction_line (and its horizontal and vertical forms) and sketch.spline.insert_point, remove_point and reverse change only the 2D sketch. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Cuts leave the bodies their tools can't reach, by exact boxes (#10225 on exact geometry) - The per-target cut loop skips a body whose exact box lies clear of every tool's, as main's version did with mesh boxes. The sheet culls (#10226, #10301) and this one now leave the far sheets and bodies alone: a_cut_leaves_bodies_it_cannot_reach_as_they_were passes and leaves the known-failing list. - a_cut_still_runs_where_its_tool_touches_grazes_or_meets_a_curved_face: a tool 0.5 µm clear of the block is now left out (exact boxes; 0.5 µm is far past the bodies' tolerances); touching and 0.1 mm in still cut. - Known failing, with reasons: main's edge lookup by a stored point (#11286, on the display mesh) is not taken; SMLib refuses the wrong-way chamfer for its tangent chain first. - EXEMPT: main's eight new sketch-only commands. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel rig: main's new view, rendering, appearance and settings commands are exempt from a case 62 of the commands main added change no geometry: the view and render panes, rendering lights and results, appearance tools, settings profiles, point clouds (drawn as points, never a body), the selection, two sketch edits, component links and History bar visibility, edit.repeat, timeline.play, inspect.compare_picture (a picture against the outline), and component.paste_from_design, which pastes the app's cross-window clipboard that no command fills. Each joins EXEMPT's first section under its family's reason. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel rig: construct.plane.axis_point gets construction cases The plane through a box edge and its far corner, graded against its closed-form normal (0,-2,3)/sqrt(13) through the origin, and the refusal of a point on the axis. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel rig: assembly cases for mass properties, align, find limits and moving items between parts - assembly.mass_properties: two boxes (2 g/cm3) in a rigid group: mass 0.006 kg, centre (18.333,5,5), inertia diag(0.1, 1.0333, 1.0333) kg mm2 by the parallel-axis theorem. - occurrence.align: a block's end face onto a base's top face: a quarter turn about y, centre (70,20,20), box (65,15,10)-(75,25,30). - joint.find_limits: a slider between two stops: min -20, max 10 mm. - component.move_features, browser.reparent and component.move_sketches.to_parts: items moved into a turned and moved part keep their world place (volumes, centres and boxes by hand). The mass case assigns a material it creates, so material.create and material.assign leave EXEMPT. PATHS names the new command modules. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel rig: export and print face cases in the import area - file.export_step, export_stl, export_3mf, export_obj: a 30x20x10 box written and read back (the meshes converted to a solid): V 6000, A 2200, 6 faces, box (5,-10,0)-(35,10,10). - file.export_urdf: a hinged arm on a grounded base: 3 links, 2 joints, and the base's mesh, written in metres, reads back as the 1 x 0.5 x 0.2 box (V 0.1, A 1.6). - body.print_face: a cylinder's flat end is accepted, its side refused. PATHS adds the URDF writer and the print face modules. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * claim: #11259 * fix: preserve transferred profile frames when capturing positions --------- Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: brett19 <brett19@gmail.com> Co-authored-by: jyviko <jyviko@gmail.com> |
||
|
|
1d387d3f21 |
Measure: the area of a curved face on the exact surface, not the display mesh (#9086) (#11486)
* Measure: the area of a curved face on the exact surface, not the display mesh (#9086) * Measure: a non-straight border edge leaves the band to the mesh; fix the Vec3 imports (#9086) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: bherbruck <brennen.herbruck@gmail.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
51d237829a | Regenerate generated files and fold pending files [skip ci] |