* Sketch: snap where two recent centre and midpoint guides meet (#8694)
The alignment guide remembered one reference and did not move the cursor. Keep the previous centre or midpoint as well, and snap a drawing point to where their guides cross.
* Sketch: keep the recent-guide crossing snap off until asked (#8694)
The crossing snap was on whenever alignment guides were. Give it its own Sketch preference, off by default, so the guides stay visual until someone turns the snap on.
* Sketch recent snap: ar/he/vi strings and clippy borrow fixes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7287
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Command search: show a command's place in the ribbon, also inside section menus (#7287)
Hovering a command result in Search commands switches the ribbon to the command's
tab and marks its button with its tooltip; a command that has no button there
opens its section's drop-down on its row instead. Leaving the results (or closing
the box) goes back to the tab the user was on, so pressing S, typing and Enter
works as before.
Starting a command from the box makes its button or section label blink twice,
and a command started from a section drop-down marks that section's label while
it runs, like a pressed button.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Command search: the ribbon reveal is a preference, off by default (#7287)
Preferences › Interface › Show search results in the ribbon (`ribbon_reveal`) turns on the hover
preview, the blink after a start and the running mark on a drop-down's panel label. Off, the
ribbon behaves as on main.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pending locale: Arabic, Hebrew, Japanese, Vietnamese and Chinese for the ribbon reveal setting
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #6237
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Settings profiles: save, switch, export and import input and interface settings (#6237)
A profile keeps the Interface, Navigation and Sketch preferences (mouse mode,
radial menu and gestures with every studio's lists, theme, scale, font, ...),
the language, the keyboard shortcuts, the toolbar, the S box favourites and
the imported theme it uses under a name. Machine-specific settings stay out
(3D mouse, graphics, units, AI, recent files).
- Preferences > General > Settings profiles: choose the active profile to
apply it, Save, Rename, Delete, Export... and Import...; a note shows when
the settings differ from the saved profile; Cancel takes a switch back.
- settings.profile.{list,save,apply,rename,delete,export,import} commands for
the control channel, palette and scripts; the engine checks the parameters,
the app does the rest.
- One `solidcraft-profile/1` file; import checks the format and name, drops
unknown keys and unreadable values, caps sizes, never switches, and never
panics. Each preference is applied through prefs::set, so a value this
computer refuses keeps its current one and is reported.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Glossary: settings profile, and "profile" among the words with more than one meaning (#6237)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Settings profiles: new strings in a pending locale file, not the catalogs (#6237)
New UI strings now go to assets/locales/pending/ (CONTRIBUTING.md), so
this pull request no longer edits the shared catalogs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Preferences snapshot: compare the toolbar, favourites and profile too
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Settings profiles: keep a command's several keys (#6237)
Since a command can have several keys (#6288), the keymap saves a list where it has more than
one. A profile's checks only took a single key, so saving or importing a profile dropped such a
command's shortcuts. They now read the keys as the keymap does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Settings profiles: Arabic, Hebrew and Vietnamese strings (complete catalogs) (#6237)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Tripper <tripper@localhost>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Preferences > Graphics > Viewport gets a Field of view row under Perspective view: the UI kit's
slider in degrees, 15 to 90, dragged or typed and kept to whole degrees, enabled only while
Perspective view is on. The preference is perspective_fov, in radians (default 0.6, about 34°,
so the default view draws exactly as before), and Restore Defaults puts it back.
One place decides the angle the view is drawn with: SolveApp::view_fov(), the preference with
Perspective view on and 0 with it off or while a sketch is open. A saved value outside 15°-90°
reads as the default. projection and fit_bounds read it (fit_bounds' second hard-coded copy of
the 0.6, tan(0.3), now goes through Camera::half_height), and so does the headless fit.
perspective_view() stays, as view_fov() > 0, so #4291 needs no change.
When the angle changes from one perspective angle to another, the camera's distance scales by
tan(old/2) / tan(new/2), with a running view animation's ends, so the target keeps its size and
the slider changes the depth, not the zoom. prefs::follow_view_fov does it once per frame and
after ui.prefs, Cancel and Restore Defaults; a parallel view keeps the last perspective angle,
and while Render is open the camera is Render's own, so the change waits for the design view.
The Render workspace's Perspective check box turns perspective on at the preference's angle,
not π/4; a saved render setup keeps its own. ui.prefs takes perspective_fov and refuses values
outside the range; ui.camera reports the angle the window draws with, and checks a replayed
camera against it, so its reply still replays. Field of view is in en, ar, de, he, ja, ko, vi and zh;
the ui.prefs settings list in docs/control-protocol.md and the guide's tour describe it.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
home.settings and ai.connected_toast follow the English change from Settings to Preferences (التفضيلات, as ui.preferences). Hover is no longer rendered as scrolling in the browser and navigation bar options, the Project options dialog label is fully in Arabic, and the trackpad zoom key help says to hold the key.
* claim: #8875
* Text fields: a right-click menu with Cut, Copy, Paste and Select All (#8875)
Every kit text field (dialog and sketch value fields, the sketch dimension
box, canvas value boxes, names, text areas, passwords, read-only text) now
calls one shared ui_kit::text_menu::menu after drawing its editor. Rows are
disabled when nothing is selected, the text is read-only or a password, or
the clipboard holds no text. The edit marks the response changed and gives
the focus back, so owners that commit on lost focus keep the field; a right
press inside the selection keeps it; Esc closes only the menu; expression
suggestions wait while it is open. New message ui.select_all in a pending
locale file; Cut, Copy and Paste reuse ui.cut, ui.copy and ui.paste.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7435
* Viewport: the 3D mouse, the bridge and drag-zoom stop at the model, like the wheel (#7435)
The wheel and pinch hold the model point under the cursor, so the view
comes up to the surface and stops there. Every other zoom path passed no
anchor, so the 3D mouse cap, the navigation bridge and drag-zoom zoomed
straight through the surface into the body.
A device has no pointer, so the cap and the bridge now hold the model
point in the middle of the view; drag-zoom holds the point under the
pointer, like the wheel. With "Zoom to the cursor" off the old
zoom-through-the-model behaviour stays, as it does for the wheel.
The orbit half of the issue is a design decision and is untouched.
* Viewport: drag-zoom holds the point where the drag started (#7435)
The zoom anchor followed the moving pointer, so the zoom slid away from
what was pressed on as the drag went on. It now holds the press point,
the way the wheel holds the point under the cursor.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* 3D mouse: turn around the model in the middle of the view (#7435)
The cap and the navigation bridge turned the view around the view's
centre, which after a pan or from far away sits behind the face, so the
part swung away while it turned. They now turn around the model point in
the middle of the view (the middle of the bodies in view over empty
space), and keep it still on screen. Preferences > Navigation > "Turn
around the model in the middle of the view" switches back to the old
behaviour.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* 3D mouse: keep the turning point until the cap is back at rest (#7435)
The point the cap turns around was picked again every frame, so it slid
to whatever came into the middle as the view moved. It's now chosen when
the cap leaves rest and kept until the cap comes back, the way a mouse
orbit keeps the point it started on.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* 3D mouse: show the point the view turns around (#7435)
While the cap turns the view, a faint ball in the accent colour marks the
model point it turns around, so it's clear what the turn holds still. The
point is now picked when the cap starts turning, not when it only pans or
zooms, so a pan shows no ball.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* 3D mouse: orbit is a choice of Traced or Classic (#7435)
The checkbox becomes a two-way choice on the 3D mouse section's form:
Traced turns around the model in the middle of the view when the turn
begins and marks it with a faint ball; Classic turns around the view's
centre as before. Traced stays the default.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Docs: the 3D mouse's Traced and Classic orbit (#7435)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Make model zoom and traced orbit opt-in (#7435)
---------
Co-authored-by: nomadsgalaxy <16734355+nomadsgalaxy@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8352
* Sketch: equation-driven curve, a fit point spline from x(t) and y(t) formulas (#8352)
sketch.equation_curve draws a curve from formulas in the expression
language and the design's parameters: x(t) and y(t) over a range of t, or
y = f(x) over a range of x. The curve is a cubic fit spline through fixed
points sampled from the formulas, as many as keep it within a tolerance
(0.01 mm by default, at most 500 points); a curve that ends where it starts
closes smoothly. The sketch keeps the formulas (one new design-format
file), places the points again before every solve so they follow the
parameters, and sketch.equation_curve.edit changes them, keeping the joined
end points. Both commands have input and output schemas.
* Sketch: Equation Curve window, its Edit menu item, labels and guide (#8352)
The ribbon's Equation Curve opens a window for the form (parametric or
explicit), the formulas, the range and the tolerance; OK runs
sketch.equation_curve. Right-clicking an equation curve offers Edit
Equation Curve, which reopens the window on its formulas and runs
sketch.equation_curve.edit. New labels and help in a pending locale file
(with ar, de, he, ja, ko, vi and zh), the icon, the glossary term and the
sketching guide.
* Equation curve: one if for closing the sampled points (clippy collapsible_if)
* claim: #7828
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: hold horizontal/vertical and line up with other points at once while drawing (#7828)
While drawing, the pointer lines up horizontally with the nearest sketch
point level with it and vertically with the nearest one plumb with it, at
the same time, as a dragged point already does; holding H/V with the
previous point still lines up across with another point. Dotted guides run
from the points lined up with (H, V or H+V), and the click adds a
Horizontal or Vertical constraint with each, in the shape's undo step,
unless the sketch already has it.
A click takes the tool out of the app while it runs, so refine_snap
treated every tool as the Line tool then: a rectangle's click could take a
line-extension inference its hover never showed. The tool's points and
kind are kept from the last hover, as the previous point was.
Preferences > Sketch > "Line up with other sketch points while drawing"
(sketch_align_points) turns it off for the old behaviour.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: lining up with other points is off unless turned on
Review on #8474: sketch_align_points defaults to off, so nothing changes for anyone who
doesn't turn it on. With it off, a click also treats the tool as before (the Line tool's
inferences), instead of keeping the tool's kind from the hover.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8570
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Insert Design: pick one of the other open designs, or browse for a file (#8570)
With other designs open in tabs, Insert Design first lists them under the
button: one click inserts a saved one as a linked component; one with
unsaved changes inserts its saved file and the status line says so; one
never saved is greyed out, as there is no file to link. Browse... opens
the file picker, as the button did before, and it still goes straight
there with no other design open.
Preferences > Design > Linked designs > "Insert Design lists the designs
open in other tabs first" (insert_lists_open_designs) turns the list off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Insert Design list: sit with the other menus' items, so run_item keeps its doc comment
Review on #8571: insert_design_items had landed between run_item and its comment. The
rebased menu-walk list keeps main's Target::HistoryControls beside Target::InsertDesign.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8100
* History: say why an edited feature behind the marker changes nothing (#8100)
Editing a feature that sits after the history marker (double-clicking its
greyed-out item) rolls back to it, previews the change, and on OK puts the
marker back where it was: the feature stays rolled back, so nothing in the
view changes and nothing says why. That is the silent "pattern of a cut
does nothing" in #8100 (the reporter's design has its pattern behind the
marker; on main the pattern itself builds fine once rolled forward).
- timeline.redefine replies `rolled_back` and, when true, a `note`; it also
carries the feature's `warning` (for a rolled-back feature, the one its
constructor met building it at its place).
- The window shows that note in the status line after such an edit.
- A rolled-back item's tooltip in both History layouts says it is after
the history marker and not built.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pending locale: Arabic, Hebrew, Japanese, Vietnamese and Chinese for the rolled-back notes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #8863
* Sketch: the status line after a dimension is in the interface language (#8863)
The Dimension tool built its "Dimension applied" status sentences (new
parameter, renamed parameter, plain value) and the driven-dimension note
with English format! strings, so they stayed English under a translated UI.
They now come from the catalog (one pending locale file: en, ar, de, he,
ja, ko, pl, vi, zh), with the typed parameter name passed in as is.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8006
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* Parts library: button head cap screws, ISO 7380-1 (#8006)
Insert Part offered the socket head cap screw but no button head, so a
design using button heads had to stand in a cap screw and accept the
wrong head. A button_head_cap_screw family now sits beside it, taking
the same parameters from the ISO 7380-1 table over M3 to M16.
The head is a new Head::Dome: the shank and the head revolve as one
outline, with the rim at dk, a short cylindrical flank, the arc of the
crown, and a flat top around the socket, so the hex socket stays a plain
cut on a plane. The standard draws the flank and the flat but dimensions
neither; they are 0.15 k and 0.7 s, and the comment on those constants
records what that costs against the standard's crown radius r1 and why
neither other fractions nor r1 taken as given does better. dk, k, s and
t are exact, each checked against three reproductions of the table.
Insert Part, Change Part Size and the bill of materials need no change:
they read the families and their table rows from parts.library.
The wider fastener request is issue 7692; this is only the one family
from it, and leaves the rest of that list open.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* Parts: format after the rebase
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pending locale: the Button head cap screw family name
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* Components: copy and paste bodies and components between designs and components (#3390)
Squashed for the rebase onto main.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3511
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Paste New: copy from a design other than the one pasted into
`component_clone::paste` read the design it copies from through the session it pastes into.
`build` now takes the source (document, evaluated model, unapplied moves) apart from the
target session; Paste New within one design passes the session as both, as before. Names are
numbered against the target's names.
From another design (`Source::copied`, a `ForeignCopy` snapshot taken at copy time):
- names are kept where the target doesn't have them, else numbered;
- the user parameters the copy uses come along, `w_2` where the target has a `w`, with the
copied expressions following;
- a copy whose features use what isn't in it (bodies, sketches, faces, parameters outside it)
is refused with a list of what; `FeatureKind::input_bodies` lists the bodies a feature uses;
- configurations stay with their design, and the target's timeline marker must be at the end;
- a body moved in from outside comes as an imported base named `BodyImport1`.
Body transfers are pointed at the copy's components before they are added: `add_feature`
checks that the components they name exist, which another design's don't.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Engine: paste bodies and components copied in another design
`component.paste_from_design` pastes what `Session::foreign_copy` holds, at the same world
coordinates as in its design, into the active component or `component` (placed by
`component_path`; a component placed more than once gets it in every instance), as one step
to undo:
- bodies as imported bodies, without their history, in one Import feature (named as any
import is, "Import1"); a body seen in another placement ("Cube (B:2)") pastes as "Cube";
names the target has are numbered;
- components as independent copies (Paste New from the snapshot): with their history,
appearances, materials, joints and motion inside them; joints to the outside stay behind.
Tests: bodies (position, naming, target component, undo; a body of another placement) and
components (history, appearances, a part placed twice, editing independently, save and reopen,
undo; user parameters renamed; refused when using a body outside it; bodies moved in).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Clipboard: copy in one design, paste in another
Copying or cutting bodies or components also keeps a snapshot of them (`ForeignCopy`); another
tab pastes it with `component.paste_from_design`: bodies as imported bodies, components as
independent copies (Paste and Paste New alike), folded and selected. Cut pastes as a copy
there, the original staying; Esc on the cut leaves nothing to paste anywhere.
The last copy in any design is what pastes: each copy or cut is numbered, and a tab whose own
copy is older empties its clipboard when it is switched to (`drop_stale`). A failed copy
anywhere leaves nothing to paste in any tab.
Tests: bodies and components pasted in another tab, the last copy winning across tabs, cut
as a copy. `copied_bodies_stay_with_their_design` gave way to the cross-design test.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Clipboard: what is selected wins over a design row picked earlier
Copy copied the whole design as a linked component whenever the design's
browser row was still picked, even after a component, body or feature had
been selected in the view or another tab, and failed in an unsaved design.
The design row now gives way to anything selected, and switching tabs
drops the picked components of the design left.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Put the Paste from Another Design label in the pending locale file
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: unground the placement before moving it (a design's first part is grounded)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drop locale keys main already folded into en.json
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pending locale: Paste from Another Design in the complete catalogs
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #7409
* Keyboard Shortcuts: the read-only list says so and leads to the editable page (#7409)
Home › Keyboard shortcuts and Help › Keyboard Shortcuts open the
Shortcuts page read-only, in the Preferences window with its sidebar and
Cancel/Apply/OK, so it looked exactly like Settings › Shortcuts with
Import…, Reset All and recording missing. The read-only page now says
"Read-only list: shortcuts can't be changed here." and has an "Edit
shortcuts" button that turns the same page into the editable one.
Strings in assets/locales/pending/shortcuts-read-only-note.json (en, ja,
zh). Harness test opens it both ways, checks the note, clicks Edit
shortcuts, and finds Import…, Reset All and a recordable binding.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pending locale: Arabic, Hebrew and Vietnamese for the read-only shortcuts note
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* Sketch Intersect: add Faces/Bodies and Projection Link options (#1110)
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* Sketch Project: add Geometry/Bodies and Projection Link options (#1110)
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* Sketch Project/Intersect: keep exact lines and arcs of whole bodies, no noisy rebuild warning (#1110)
Whole-body silhouettes and sections fit lines and arcs tightly and snap arcs
tangent to their neighbours. A rebuilt projection warns only when it removed
the user's own constraints or curves. Pending locales cover ar, he and vi, and
the preselection tests use the direct-pick workflow.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* Select Other: label curves from Intersect as intersected (#1110)
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
---------
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* claim: #8692
* Browser: remember the folded card across runs, optional reveal on hover (#8692)
The browser card's fold (the chevron in its header) is now a preference,
saved with the other layout state, so the next run starts the way the user
left it. Preferences > Interface > Layout adds Shown / Reveal on hover: the
browser then stays out of sight until the pointer comes over its place or
the thin tab at its left edge, fading in like the navigation bar's Hide
until hovered, and stays while the pointer is inside or a menu, drag or text
edit started from it is open. It never folds in that mode.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Browser: move the reveal-on-hover messages to a pending locale file (#8692)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>