Daniel 155387bac1 Sketch Trim: a cut on a shape's centre ends the piece there, with no second point (#12101) (#12103)
* Sketch Trim: a cut on a shape's centre ends the piece there, with no second point

Trimming half of a center rectangle's diagonal left two points at the centre. Trim dropped the diagonal's Midpoint constraint and ended the kept half on a new point held only on the other diagonal, so the old centre was free and the new end slid along the other diagonal. Dragging a corner pulled them apart.

A cut that lands on a point held at the middle of the trimmed line or of the cutter now ends the kept piece on that point. When the trimmed line held it, the Midpoint moves to the cutter if the point is the cutter's middle too (a rectangle's diagonals bisect each other), and otherwise the point is held on the cutter as a new end would be.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch Trim: weld the cut end before a parallel distance moves onto it

A distance between parallel lines that measured from the trimmed line's end moves to the kept piece's start. When that start is a cut welded to a centre point, the move named the new point, which the trim then removed along with the dimension. The weld now happens first.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch Trim: test that a parallel distance moves onto the welded centre

Trimming the start half of a center rectangle's diagonal moves a distance to a parallel line onto the kept half's start, which is the centre. The test fails if the weld runs after that move: the dimension then names the cut point and is removed with it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch Trim: the centre comment names the case that reaches it

Only a line carries a Midpoint, so the comment's ellipse case could not reach this code.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch Trim: a crossing line whose middle is only near the cut gets no midpoint hold

Trimming a line at its held midpoint moved that hold onto the cutter whenever the cutter's middle sat at the cut, so a crossing line that merely happened to have its middle there was tied to the point. The hold now moves only when the sketch makes the two lines diagonals of a parallelogram (each pair of opposite sides held parallel, horizontal or vertical), as a center rectangle's are; otherwise the point stays on the cutter.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch Trim: ask the solver whether a cutter's middle is held at a cut midpoint

Moving a cut midpoint's hold onto the cutter only for a parallelogram of parallel, horizontal or vertical sides missed rectangles the sketch holds another way: with the bottom side held square to a side instead of horizontal, trimming a diagonal at the centre left the centre held only on the other diagonal, one degree of freedom freer than before. The hold now moves when the sketch already implies it, that is when adding it to the sketch as it was takes away no degree of freedom.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch Trim: solve for the implied midpoint only when a cut lands on one

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 21:39:58 +00:00
2026-11-03 15:35:34 -05:00
2026-10-11 16:07:46 +08:00

SolidCraft

SolidCraft

An open-source parametric 3D CAD application built in pure Rust.
Sketch, constrain, and build solids with a parametric feature timeline. Change a dimension and watch your model rebuild. Run it on your desktop, in your browser, or let AI agents model through the built-in MCP server.

Download for Windows Download for macOS Download for Linux Get it from the Snap Store Try it in your browser

Website · Download · Try it in the browser · Documentation · CI powered by Blacksmith Discord · SolidCore

CI Latest release Downloads Licence Discord Listed on Remade Stars

tangency-labs%2Fsolidcraft | Trendshift tangency-labs%2Fsolidcraft | Trendshift (Rust)

SolidCraft: model a Raspberry Pi 4 case from an empty design: a sketch dimensioned with parameters, extrude, fillets and shell, a rim rounded in one pick, standoffs patterned on the board's mounting holes, port cut-outs, vent slots, "Pi 4" engraved in a font, a PETG material with its mass in Properties, and a height change in Parameters

A Raspberry Pi 4 case from an empty design: a sketch dimensioned with the board's parameters, extrude, fillet, shell, the rim rounded in one pick, an M2.5 standoff patterned on the 58 × 49 mm hole rectangle, port cut-outs, vent slots, "Pi 4" engraved in DejaVu Sans Bold and a PETG material defined in the design, with its mass in Properties, then height 24 → 32 mm in Parameters and it all rebuilds. 6× playback with the idle pauses cut. Full video, recorded with the demo script.

Download

ARM64 and 32-bit builds, portable zip, .deb, .rpm, Flatpak and the other packages are on the downloads page. The macOS app is signed with a Developer ID and notarized by Apple. The Windows downloads aren't signed yet: choose More info, then Run anyway in SmartScreen. On SolidCraft 0.11 to 0.14, download once by hand; see updating.

What works

Early but usable for simple parts: 75 of 76 public reference parts match their analytic or FreeCAD-computed volume, area, centre of mass and bounding box (oracle); the other is a tracked bug.

  • Sketches and constraints: lines, arcs, splines, text and more, solved by our own constraint solver, with parameter-driven dimensions.
  • Features: extrude, revolve, sweep, loft, fillet, chamfer, shell, draft, holes, threads, patterns, mirror, split and combine on an editable parametric timeline.
  • Parameters and configurations with unit-aware expressions.
  • Assemblies with joints, motion studies, contact sets, interference and mass properties.
  • Sheet metal with flanges, hems, fold/unfold and flat patterns, and plastic enclosure features.
  • Files: STEP, IGES, 3MF, STL, OBJ and glTF in and out where supported, URDF export, .sc designs (.solidcraft files from earlier releases still open).
  • Desktop app, browser app, headless CLI and MCP server, all running the same commands.

The full list is in docs/capabilities.md and docs/features.md; status and plans are in ROADMAP.md. See also what people built, 3D mouse support and the architecture.

Build from source

cargo run --release -p solidcraft -- --sample      # desktop app with a sample part
cargo run --release -p solidcraft-cli -- commands  # the command registry
cargo run --release -p solidcraft-cli -- run examples/bracket.json --out bracket.step
cargo xtask ci                                     # fmt, clippy, tests, icons, assets, layers, wasm

More commands, the Windows cross-build and the browser build are in docs/building.md.

AI agents (MCP)

solidcraft-cli mcp is a Model Context Protocol server. Headless it runs its own design session, or with --connect it drives the running app so you can watch. Claude Code: claude mcp add solidcraft -- solidcraft-cli mcp. If a terminal doesn't find solidcraft-cli (older Windows installers don't put it on PATH), give its full path (by default "C:\\Program Files\\SolidCraft\\solidcraft-cli.exe"). Tools, access rules and an example session: docs/mcp.md.

Scripts

A script is a JSON list of the same commands the UI runs, executed with solidcraft-cli run. Format and example: docs/scripts.md. Pages can also be driven through the browser command API.

Contributing

Help is welcome. CONTRIBUTING.md covers how to build and test, the code map, the clean-room and licence rules, and where help is wanted most. Open work is in GitHub issues; chat is on Discord.

Sponsors

CI powered by Blacksmith

SolidCraft's continuous integration runs on Blacksmith, which sponsors its CI minutes.

Disclaimer

The files in this repository are provided as is, without warranty, liability or indemnity, and Tangency Labs and the contributors accept no responsibility for any harmful or unlawful use of them: read DISCLAIMER.md.

Licence

MIT OR Apache-2.0, at your option. Developed under the clean-room contribution rules; third-party code and assets retain their documented licences and attribution.

SolidCraft is independent. Behaviour is designed from public documentation, general CAD conventions and user feedback. Reference tests use analytic values and open-source tools. SolidCraft is not affiliated with, sponsored by or endorsed by Autodesk, Dassault Systèmes, PTC, Siemens or any other CAD vendor. Fusion, AutoCAD, Inventor, SolidWorks, Onshape, Creo, Blender and Tinkercad are trademarks of their respective owners, named only to describe compatibility (see NOTICE).

S
Description
No description provided
Readme 298 MiB
Languages
Rust 96.7%
Python 2.2%
WGSL 0.4%
JavaScript 0.3%
Shell 0.2%