Commit Graph

167 Commits

Author SHA1 Message Date
amolinari-autotex 5e05d925e0 Tapped Hole: keep Custom selection and edit nominal diameter (#2440) (#2441)
* claim: #2440

* feat: choose ISO metric tapped-hole sizes and derive the drill diameter

* fix: label the tap drill and hide the unused diameter editor

* test: cover tapped hole catalogue and drill sizing

* fix: omit coarse metric pitch from generated designations

* Keep custom tapped-hole nominal diameter and pitch editable

Preserve Custom as dialog state, derive the existing metric designation from numeric inputs, and refuse invalid drafts without applying the last valid size. Retain manual text editing, physical tap-drill geometry and saved-design compatibility.

* fix(i18n): register custom tapped hole labels in source catalogs

* Adapt tapped-hole Custom fields to the current form kit

* fix: preserve tapped designation focus with dynamic custom rows
2026-10-21 18:56:38 +00:00
The Nomad f22a026c27 3D mouse: choose which motion drives each axis (#2782)
* 3D mouse calibration: find each axis from a guided recording (#1463)

A recording of the cap at rest and moved along each axis both ways gives which raw axis is which,
which way it runs, where it rests, how much it wanders at rest and how far it goes each way.
Hands aren't exact: on our SpaceMouse Pro, sliding the cap right moved Ry further than X. So each
raw axis is picked by the one-to-one assignment that best explains all six motions together, each
raw axis scored against its own range so a wider one doesn't win through cross-talk. Each
direction is scaled on its own, so a device that goes further one way still reaches full scale
both ways; a direction under a twelfth of the furthest axis counts as not having responded.

A small state machine walks the user through it and moves on by itself once the cap has been held
out for 0.4 s in one go and let go. "Held out" is the least the solver accepts, twice an axis's own
rest wander, so whatever the solver would accept can be recorded and a noisy axis doesn't hold up a
quiet one.

A calibration also carries a dead zone the user sets, a share of full deflection taken off the
bottom of the travel, with full deflection still reading full scale.

Serde support is behind an optional feature, so the crate still needs nothing by default.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3D mouse calibration in Preferences, saved per device (#1463)

Preferences > Navigation gets a 3D mouse calibration row: whether the device being read is
calibrated, Calibrate... and Forget calibration. The window asks for each motion in turn and
saves what it found under the device (hid, web, spacenavd or 3dxware, with vendor and product ids), so
switching devices or turning spacenavd on doesn't apply the wrong mapping. A calibration is saved
for the device it started with, and ends if another one is read instead.

navigate_frame puts the reading through the device's calibration before the driver mapping, so
the per-axis Invert and speed and everything after them are unchanged. While the window is open
the reading goes to it and the view stays put; it closes with Preferences. Restore Defaults on
the Navigation page keeps calibrations, since they describe the device.

The web app hands over the gamepad's readings as they are, so calibration sees where the cap
rests; navigate_frame now leaves a reading inside the dead zone alone after calibration, so a
cap resting just off zero still doesn't keep redrawing. Whether the cap is moving is asked of the
calibrated reading there, in the web page's idle waker and in both wheel filters. Those run before
the frame, so they keep the last frame's calibration with its device and use it only for that
device. On the desktop, an axis with nothing fresh (timed out, or not reported since the device
connected) reads as the device's calibrated rest, so a device resting off zero doesn't drift.

A saved calibration that can't be read or used (a hand edit) is dropped on its own when the
preferences load, with a log line.

The window shows the device's raw readings live and has a dead zone slider, a share of full
travel on top of the measured noise; it's saved with the calibration and adjustable in Preferences
afterwards.

New strings are in all 14 catalogs.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3D mouse: choose which motion drives each axis (#1463)

After calibrating, which motion of the cap should drive which view axis is partly a matter of
taste: rolling and twisting swapped, say, or Y and Z. Each axis row in Preferences > Navigation
now has a "driven by" choice next to Invert and speed. Picking a motion another axis uses swaps
the two, so each motion always drives exactly one axis, and Reset axes puts them back.

The choice applies after the device's calibration and before the driver mapping, so Invert and
speed stay with the view axis rather than moving with the motion. It's a preference, not part
of a device's calibration, and stays in force when recalibrating; the calibration window says
so while one is set. A saved assignment that doesn't drive each axis once loads as the default.

New strings are in all 14 catalogs.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3D mouse: axis choice review follow-ups (#1463)

- An axis's speed, like its Invert, stays with the view axis when a motion is reassigned; tested.
- Calibrating records the device's own reading, before the axis choice, so a saved swap isn't
  baked into a new calibration and then applied twice; tested through a whole calibration.
- A settings file without the axis choice, or with one of the wrong length, loads with the
  default and keeps every other setting; tested.
- Each axis row says "driven by" in sight before its choice, which otherwise only explained
  itself on hover (no help on a touchscreen or the web).
- "Reset axes" is now "Reset axis assignment", so it doesn't read as forgetting the
  calibration just below it; the "driven by" tip reads more clearly in English.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3D mouse: name axis rows by what they do, and motions without a device in mind (#1463)

The axis rows and the "driven by" choices showed the same names, "Push left / right" and so
on, which read as one thing mapped to itself, and they described a cap that springs back to
centre, which a trackball or a knob that stays put isn't.

Each row is now named for what it does to the view: Pan left / right, Zoom, Pan up / down,
Orbit up / down, Orbit left / right or Roll, or Off. The name comes from the driver mapping
navigation used last frame, so it stays right where the mapping swaps axes (object mode swaps
the last two). Before navigation has run there's no mapping to read, and a row is named for
its own motion instead of a guessed effect. The choices are the device's calibrated motions:
Translation X / Y / Z and Rotation X / Y / Z, under a header row, and the calibration window
names a motion that barely moved the same way. This renames #1814's existing rows, which had
no translations; every new name is in all 14 catalogs.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3D mouse: rows never fall back to a motion name (#1463)

Without a driver mapping, a row was named for its own calibrated motion,
which is also what its dropdown lists. It now takes the default mapping's
view axis, so the two sides never share a name.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3D mouse: grey out Invert and speed on rows the driver turns off (#1463)

A row the driver profile turns off says so on hover, and its Invert and
speed are greyed out, since they do nothing there. Its motion choice stays
live so a motion can still be swapped out. The column header is shorter.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3D mouse: unmapped rows say Axis 1-6, and the off-row tip explains the swap (#1463)

Without a driver mapping, a row is now just "Axis n" rather than the
default mapping's view axis, which would be a guess there. The tip on a row
the driver turns off says that a motion swapped into it stops moving the
view, and a test swaps one in and back out.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3D mouse calibration: a device that stops short of rest after a release (#2778)

Through spacenavd, a relative-axis device like the Space Navigator never
reports its return to zero, so the reading stays at its last small report
after every release. The wizard never saw the cap let go, and once
calibrated, the stuck value crept the view.

A reading that stays exactly the same, close to rest, now counts as let go,
and where the cap settled after each step goes into the calibration: such a
device rests at the middle of where it settled, with a dead zone out to the
furthest of them. A device that comes back to rest calibrates as before.

* 3D mouse calibration: a steady hold through spacenavd stays a hold (#2778)

* 3D mouse calibration: stopping short of rest only counts from spacenavd and 3DxWare (#2778)

Recentring on where the cap settled kept the rest stage's wander radius but
not its offset, so a rest extreme could fall outside the dead zone; the
radius now grows by how far the centre moved. A reading that stops changing
close to rest only ends a step from a source that sends nothing at rest, so
HID and web devices calibrate exactly as before.

* 3D mouse calibration: settling off-centre counts on any device (#2778)

A drifting stick settles off its rest after a release just as spacenavd's
stuck reading does, but it keeps reporting, noisily. A step now ends once
the reading stays steady, each raw axis within twice its rest wander (so
exactly still from a silent source), close to rest, on any device. The
dead zone takes that wander on top of the furthest settle point.

* 3D mouse calibration: steadiness by the run's spread, settled on the step's own axis (#2778)

An axis that read flat at rest may dither once off-centre, so steady
readings may spread at least 2 units and a 50th of the furthest any step
went. Steadiness is the spread of the whole run, not distance from its
first reading. Close to rest is judged on the axis that set the step's
peak, since a device's axes may have different ranges, and the settle point
is the middle of the steady run.

* 3D mouse calibration: readings close to rest never count as held (#2778)

* 3D mouse calibration: the dead zone reaches every reading of each release (#2778)

Saving one reading of each release and padding it by the rest wander could
miss a reading seen in the same steady run. Each release now keeps the whole
run, and the dead zone is centred on and reaches everything read at rest
and after the releases.

* 3D mouse calibration: settle for half a second before a step counts as let go (#2778)

A hand held still close to rest is less likely to end a step early; a
device that comes back to rest never waits for it.

* 3D mouse calibration: show the dead zones as a game controller tester would (#2778)

Once calibrated, the window, and Preferences under the Dead zone slider,
show three pads: slide, press and twist, and tilt. Each has a circle for
the full travel, the dead zone shaded inside it with each direction its
own size and the user's dead zone on top, and a dot where the cap is now,
lit once the view moves.

* 3D mouse calibration: settle through cross-talk, per-axis steadiness floor (#2778)

The axis that went furthest in a step needn't be the one asked for:
cross-talk can move another raw axis further. A step now counts as let go
once the furthest axis is at least halfway back and some axis that moved
about as far is within a quarter of its own peak; a hand still holding the
push keeps the furthest axis out. The steadiness floor follows each axis's
own reach, and each stage's steadiness starts with its own readings.

* 3D mouse calibration: steady readings may dither ±2 on any axis (#2778)

* space-mouse: make the settle check's near band match the steadiness spread, test the 4-unit floor

near() measured distance from the settled run's middle against the whole tolerance,
so it accepted twice the band the steadiness check does. Use half. Add a short-range
test where only the .max(4.0) floor lets a +-2 dither settle, and one where dither
the spread check rejects is also not skipped as untouched.

* space-mouse: settle on the middle of the steady run so a lopsided dither isnt movement

near() allows half the steadiness spread around the settled point, but the point was the run mean. A dither that is mostly one value with an occasional far one (10, 10, 10, 14) is steady, yet the far reading sat 3 from the mean and started a hold in the next step. Use the middle of the run range instead.

Adds a lopsided-dither test and a test pinning the documented cross-talk limit ([100,300] then [5,90] stays open).

* Judge an untouched cap by the settled run's spread, not a rounded midpoint

Rounding the midpoint to i16 could leave one end of an odd-width run more
than half the tolerance away, so the cap read as touched while sitting at
the end of the run it settled on. Keep the run itself and ask whether one
more reading keeps its spread within tolerance.

* space-mouse: pin the wider skip band of a narrow settled run and a single-reading settle

* space-mouse: keep a step held while a lesser axis stays out as the larger one relaxes

Settling needed one axis furthest and returned, and one axis about as far and settled, which a single relaxed cross-talk axis satisfied alone. Every axis that moved at least half as far as the furthest now has to be back by RETURNED_SHARE of its own peak too.

* 3D mouse: the calibration tests run in a focused window, as the focus check now requires

* 3D mouse: the axis tests run in a focused window, as the focus check now requires

* 3D mouse: the calibrated-rest test runs in a focused window, as the focus check now requires

* Settle a spacenavd reading that is nearly at rest (#3523)

spacenavd sends a record only when the values change and nothing when the cap springs back, so the last small leftover of a release was held forever and the view kept drifting.

A held reading now reads as rest once every axis is within 150 raw units of the device rest and no record has arrived for 0.5 s. A firmer push stays as long as it lasts, and so does a small value next to a large one. 150 is the smallest round number above the worst leftover in the issue (129 on one axis).

* Choose which 3D mouse driver to read on Linux

When both spacenavd and the device itself (hidraw) are there, Preferences now has a "3D mouse driver" choice: Automatic, spacenavd or Direct. Automatic is what it always was, spacenavd when it runs and the device otherwise, so nobody's setup changes. If the chosen one isn't available the other is read and the log says so once. Each driver keeps its own calibration, as before.

To switch without a restart both reads now wake up when idle and look at the choice: spacenavd with a 250 ms read timeout, hidraw opened non-blocking and polled every 5 ms when it has nothing. A record that arrives is read as before, and one split across a timeout is kept. The reader also publishes which of the two exist, which is what shows the combo box; with only one it says which one is in use.

* Build the 3D mouse row header from existing labels

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-21 11:29:33 -04:00
bherbruck cb3cabeda1 Remove camera animation: every view change and orbit applies at once (#4296)
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 11:19:40 -04:00
SS-EN 776541b081 Agent commands compute off the window thread, so the window stays live (opt-in) (#1989) (#3340)
An agent's design changes over the control channel (engine.execute, engine.batch) are evaluated
ahead on a copy of the session on an `agent` worker, then run on the window thread reusing every
feature computed there (doc::KeptResults, whatever the bounded evaluation cache dropped); the
worker also makes the display meshes of the bodies they end with. Exports run on a copy. While a
change computes, or the agent cursor acts one out, ui.*, inspection and screenshots answer; later
design changes wait their turn. A chip names the command with Stop. A person's edit meanwhile goes
first; a replaced design refuses the request. Preference: Preferences > AI, agent_off_thread, off
by default.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 00:58:56 +00:00
bherbruck 818af2b856 Icon audit: regenerate the requested-icons manifest (#3969)
The menus no longer ask for offset_one_side, offset_symmetric,
offset_two_sides, pattern_center or pattern_flip, so the manifest check
failed on main and on every UI pull request.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 22:08:10 -04:00
CamWight ac362945cc English (UK) as a language: a plain catalogue of the 25 messages UK English spells differently (#2501) (#2502)
* claim: #2501

* English (UK) as a language: a plain catalogue of the 25 messages UK English spells differently (#2501)

assets/locales/en-GB.json holds only the English messages whose spelling differs in UK English (Centre, Customise, Organisation, Licence, colours, towards, ...), in UK spelling; every other message falls back to English. One registration in i18n.rs (English first, then by id), a test that shows UK spelling and English for the rest, a row in ATTRIBUTION.md, and the docs/localization.md note. The translation-coverage checks skip a regional English catalogue, which has no gaps to report.

Fixes #2501

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 00:44:19 +00:00
rlartot edad8078ba Ribbon tooltips: a short written help for the main tools (#2758) (#3089)
* claim: #2758

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01X2qZQXd3qSwu9mzaYcB9yW

* Ribbon tooltips: a short written help for six tools (#2758)

Extrude, Revolve, Fillet, Chamfer, Shell and Hole get two sentences under the
tool name in the ribbon tooltip (en, ja, zh). Text only.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01X2qZQXd3qSwu9mzaYcB9yW

* fr: aide des infobulles (6 outils) (#2758)

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Ribbon help: also in the panel drop-downs (#2758)

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 00:39:43 +00:00
bherbruck cb1b230732 Add Dutch, Swedish, Traditional Chinese, Indonesian, Romanian and Hungarian (#3826)
The new catalogs are machine translated; native speakers, corrections are very welcome.
2026-10-20 17:32:44 -04:00
bherbruck a9aab13d92 Translations: complete Ukrainian, French, Danish (#3802)
The added strings are machine translated; native speakers, corrections are very welcome.
2026-10-20 16:28:31 -04:00
bherbruck 6235295ba6 Translations: complete Czech, Italian, Vietnamese, Spanish (#3801)
The added strings are machine translated; native speakers, corrections are very welcome.
2026-10-20 16:28:27 -04:00
bherbruck 51e2f0a34b Translations: complete Malay, Brazilian Portuguese, Polish, Galician (#3800)
The added strings are machine translated; native speakers, corrections are very welcome.
2026-10-20 16:28:22 -04:00
bherbruck 0191e3e157 Translations: complete Russian, Korean, German, Turkish (#3799)
The added strings are machine translated; native speakers, corrections are very welcome.
2026-10-20 16:28:17 -04:00
Nathan Dane c78095ccde Fix UI stack integration after rebasing on main 2026-10-20 21:50:22 +02:00
Nathan Dane d45fcce72c Command search popup on the UI kit; the bottom command line is gone 2026-10-20 21:01:32 +02:00
Nathan Dane a3e2fe25bb Context menus, radial menu and rename popover on the UI kit 2026-10-20 21:01:25 +02:00
Nathan Dane 57aad71bbe Window frame with page list and the confirm dialog on the UI kit 2026-10-20 21:01:25 +02:00
Nathan Dane f2eaead594 Per-tab accent tokens: fill, ink and tint for every tab, with a contrast guard 2026-10-20 21:01:25 +02:00
Nathan Dane a5e0fe3ec4 Parameters, Configuration Table, Crash Reports and Appearance redesign (step 8 of #2016, after the cleanup PR) 2026-10-20 21:01:25 +02:00
Nathan Dane dad56187df Cleanup after the popup move (step 7 of #2016, after the panels PR) 2026-10-20 21:01:18 +02:00
Nathan Dane 7026248e25 Every popup and panel on the UI library (step 6 of #2016, after the library PR) 2026-10-20 21:01:11 +02:00
Nathan Dane 1122cd44b8 UI library, tokens, fonts and icons (step 5 of #2016, after #2287) 2026-10-20 21:00:56 +02:00
Nathan Dane 837dbe66df Compass and viewport overlays (step 4 of #2016, rebased onto step 3) 2026-10-20 21:00:50 +02:00
Nathan Dane 845edeba5f Floating browser card and history strip (step 3 of #2016, rebased onto step 2) 2026-10-20 21:00:50 +02:00
Nathan Dane a0c1a67220 Application bar and ribbon redesign (step 1 of #2016) (#2176)
* ui: spacing, radius and type tokens, per-tab accents, agent and on-accent tokens

* ui: per-tab accent behaviour and a larger application bar with a Start page button

* icons: silhouette master and flat assistant and agent link icons (open for review)

* icons: apply review notes (sparkle assistant, refined plug, silhouette halo)

* icons: wire the silhouette master to inspect.silhouette; record the accepted icons

* ui: application bar to the design: separators, Save, house, assistant icon, readable hovers

* ui: ribbon structure: Model to View tabs, contextual Sketch and Sheet Metal, migrated pins

* ui: ribbon painting to the compact design

* ui: smaller icon button highlight and assistant mark on the bubble corner

* ui: short ribbon labels that wrap at spaces

* ui: ribbon buttons fit their labels and Finish Sketch shows its full name

* ui: constraint gallery, workspace menu, section list headings and richer tooltips

* ui: lighter selected tab label, ribbon surface and dimmer bar separators match the dark design

* ui: document tabs as rounded chips with a dimmer inactive label

* ui: document tabs fit their names and show close only when active or hovered

* icons: close and plus masters for the document tabs (open for review)

* ui: centre the new-tab plus and overflow button on the bar

* ui: a quiet rule under the ribbon tabs on non-contextual tabs

* ui: the application bar mark separates its faces with the bar colour, not white

* ui: open ribbon section label uses the selected tint and a chevron

* ui: dim the tab close and plus icons until hovered

* ui: every ribbon dropdown uses the chevron, the workspace card included

* ui: the active document tab uses the design's surface colour

* ui: the bug button's right padding mirrors its icon side

* ui: square constraint cells and a rule before the grid

* ui: constraint cells back to their earlier size, keeping the rule

* ui: smaller constraint cells and icons, centred in the section

* ui: constraint cells fit the height of the large buttons' icon and label

* ui: sketch Create titles share the other labels' line

* ui: format the application bar and ribbon changes

* ui: active tab surface token and the colour and hover tests that follow the redesign

* tests: the merged parameter and narrow toolbar tests follow the compact ribbon

* i18n: the Malay Gap label has an English source and its Japanese and Chinese translations

* apply_off_thread tests: the evaluation lingers in tests, so still computing never depends on machine speed

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-20 17:23:49 +00:00
Victor Santos Oliveira 5305d7c82d Clarify delayed detection in unclean-exit reports (#3640) 2026-10-20 16:05:55 +00:00
Christian Svensson 511faedcfa Fix OpenGL startup with portable AO depth reads (#2888) (#2933)
* claim: #2888

* fix: preserve AO depth in a portable integer texture (#2888)
2026-10-20 11:41:40 -04:00
SS-EN c7bd467be7 joint.inspect: show agents what each joint is attached to (#3453)
* joint.inspect: what each joint is attached to, for agents

A read-only `joint.inspect {joint?}` gives each joint's definition: for each
side the occurrence, its component and path, the snap as saved, and what
each persistent face/edge name refers to (the feature that made it, and the
sketch and curve a swept side came from), whether the origin resolves and
why not; plus kind, offset, angle, flip, values with limits, expressions,
the motion links it is in, and its solve errors and conflicts. Its id ends
in `.inspect`, so agent gates treat it as reading only.

MCP `inspect_design` includes the definitions when the design has joints
(`joints: false` leaves them out). joint.list and joint.inspect share the
motion-link JSON.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* i18n: catalog entries for Inspect Joint (en, ja, zh)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 14:21:54 +00:00
SS-EN fb811fbf21 Sketch trim: drag a path across curves to trim every piece it crosses (#3182)
`sketch.trim.path {points, dry_run?}` walks a polyline and, at each place it
crosses a curve trim may change, removes that piece exactly as `sketch.trim`
would there, in the order crossed and in one undo step. A piece already gone
is not trimmed again; projected geometry, infinite lines, offset outputs and
pieces trim refuses are passed over (reported in `skipped`). It returns each
trim's result and each removed piece as a polyline; `dry_run` reports them
without changing the design.

With Trim on, a press and drag in the viewport draws that path: the pieces it
would remove light up (a dry run of the command) and letting go runs it. A
click still trims the one piece under it.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 14:20:12 +00:00
shop-3d 2061ad1694 i18n: add missing Danish translations (#3028)
* i18n: add Danish (da) UI translation

* i18n: refine Danish part properties wording

* i18n: sort Danish catalog in canonical key order
2026-10-20 12:39:11 +00:00
Matthew Knutson 953fd7d5f8 Typed parameter contracts and JSON Schemas for solid.box and solid.extrude (#2829) (#2611)
* Spike: typed parameter contracts and JSON Schemas for solid.box and solid.extrude

The schema RFC's spike (plan/schema-spike.md). solid.box and solid.extrude get
typed contracts with generated JSON Schemas (2020-12), checked in front of the
unchanged handlers by a per-session level: off (the default, which changes
nothing), warn (the call runs and gains param_warnings) or strict (the call is
refused and the design left alone). Also engine.describe and the MCP tool
describe_command, `solidcraft-cli mcp --param-check off|warn|strict`, a
FeatureResult type for feature replies, and an env-var audit recorder
(SOLIDCRAFT_PARAM_AUDIT) used to check the contracts against every test.

Local spike branch; not for upstream as is (see the results report).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Parameter contracts: put the audit recorder behind a feature; drop two ignored test keys

The audit recorder is now on only in a build with the engine's `param-audit` feature
and `SOLIDCRAFT_PARAM_AUDIT` set. Its code is still compiled, linted and tested without
the feature. `scripts/param_audit.py` summarises a test run's audit logs, and the schema
module's docs give the steps for converting a further command.

Two tests passed keys their command ignores, which the audit found: `position` on
`solid.box` (`hole_face_tests.rs`) and `symmetric` on `solid.extrude` (`face_tests.rs`).
Both are removed, so the tests build what they always did. Comments no longer call
the contracts a spike.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-20 10:45:08 +00:00
Irakli Kourtis 37a8402cae surface.blend: seam alignment, chain-topology refusal and a dialog (#764) (#2488)
* kernel: a blend runs along chains of several faces and lines closed rims up (#764)

A blend's chain may run along the boundaries of several faces (a tube's rim
along the halves of its wall): each edge continues from its own best-facing
face, read station by station. Before, a chain had to be the edges of one face,
so every rim of a revolved or cylindrical surface was refused.

Two closed chains blend from matching seams: the second chain's start (searched
by arclength, then narrowed) and direction are the ones that put each station
closest to its partner, so rims whose seams sit apart no longer twist. A
picked `seam` point on each chain fixes the start instead. A closed chain
against an open one is refused. Closed chains leave towards each other's
centroid, not a point on the rim.

Stations are read on the edges' own curves, not on the chords of the length
table (they sat up to the chord's sagitta inside a curved edge), and the
reported gap is measured to the curves.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* kernel: closed blend chains run round the same way; Hermite strip and seam tests (#764)

The second of two closed chains runs round the same way as the first (by
their area vectors), so a picked seam turns the blend by just the angle
between the seams instead of folding it over. The nearer pairing decides only
when the loops stand almost at right angles.

Tests for the issue's gates: the blend between two offset box rims is the
analytic cubic Hermite strip (control points from the chord) and keeps the
top faces' normal along both seams; picked seams a quarter apart turn the
blend a quarter round.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* surface.blend: `seam` picks where each chain's stations start (#764)

A point on each chain, saved with the feature (one pending format change),
moved with the design like `align`, and refused when it is not two points.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* surface.blend: a test between two tube rims, their seams picked and saved (#764)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* Blend dialog: edges at each end, continuity and bulge per end, stitch (#764)

SURFACE › CREATE › Blend Surface opens a dialog: the edges the blend leaves
and the ones it arrives at, each end's continuity (G0–G3) and bulge, and
Stitch to both bodies. Edit Feature brings it back and keeps what the dialog
does not show (align and seam points). Labels in every locale catalog.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* ROADMAP: M8 Blend runs along several faces, pairs closed rims and has a dialog (#764)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* kernel: a blend station on the vertex between two support faces is read on the neighbour (#764)

A station where a tube wall's two halves meet sits at a corner of one half's
parameters; with a leave direction that turns round the wall (tubes off each
other's axis) the shape could not be read there and the blend was refused. The
neighbouring chain edge's face holds the same point and reads it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* blend: review clean-ups (#764)

- ChainLine keeps one list of samples instead of four parallel lists.
- frames_on and boundary_gap take the chain's ChainLine instead of rebuilding it.
- A station is read on the neighbouring face only when it sits on the vertex the two edges
  share, each face once, and each face keeps its own walk.
- The seam rule (a closed chain starts at it, an open one runs from the nearer end) lives in
  ChainLine::start_at_seam; pair_with reuses the start of its both-ways search.
- support_faces projects with curveblend::project; loop_area sits with plane_through.
- surface.blend parses `align` and `seam` through one point_pair; the Blend and Ruled dialogs
  share body_and_edges.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

---------

Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 04:26:12 +00:00
JIJINBEI fe3b14e798 refactor: Aabb2 and point-built Aabb3 for every hand-rolled box (#2428)
* Iterate instead of indexing in nine loops

Replace index loops that look up neighbours by position with enumerate,
zip(cycle().skip(1)) for wrap-around pairs and zip(skip(1)) for
consecutive pairs. No behaviour change.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: ring_edges for the edges of a closed ring

Every walk over a polygon's edges, the last back to the first, spelled
x.iter().zip(x.iter().cycle().skip(1)); eighteen of them now call
geom::ring_edges. Three redundant take(len) calls go with them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Ring, a closed ring that knows it is closed

A Ring holds items in order around a closed polygon, loop or fan; edges()
walks each with the next and the last with the first, corners() each
with both neighbours. Ring<Vec2> has signed_area and even-odd contains.

Loop2::polyline returns a Ring, as do doc's face_loops and
boundary_loops, kernel's coplanar wire samples, CapLoop's segments,
tess pieces' rings, the gizmo's plane quads and the navigation cube's
facets. Their walks take edges() or corners() instead of wrapping an
index; sketch's text-hole test and doc's poly_area become contains and
signed_area. Loop2::joints pairs each segment with the next.

Replaces the ring_edges free function.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Chain, Ring and Path; bounds for a chain of points

Ring becomes Chain<T, Closed> beside Path = Chain<T, Open>: edges()
closes a ring and stops at a path's end, Path::close makes the ring,
and bounds() (the empty box for no points) serves both. Eight
hand-rolled min/max folds over a loop's polyline call bounds(); doc's
flat_polyline returns a Ring.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: area and inside on Ring for any planar point

Ring's signed_area and contains take any Planar point (Vec2 or
[f64; 2]). The cam profile in joints_cam is a Ring: its own even-odd
test goes, and its edge walks, gap and area take edges(). face_params'
loop area, the text path's winding, tess pieces' ring area and the
copies in three tests call signed_area or contains; the formulas are
the same term for term.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* doc: sheet's closed outlines go through Ring

dedup takes and returns a Ring (dropping a last point back on the first
is what makes it a ring's), near_outline walks a Ring's edges, and the
copy of it beside fold checks calls it. point_in goes: its callers ask
the Ring. Its formula anchored each crossing on the other end of the
edge, so the two can differ only for a point on an edge to the last
digit; one caller sets such points aside first, the others test a
region's interior point, a cut's midpoint or another outline's corners.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* doc: cam tests build their outlines with Ring::from

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: area_vector on Ring<Vec3>; three Newell sums use it

Ring<Vec3>::area_vector is half the sum of a × b round the ring. heal's
loop_area, lip's outer-loop turning and the revolve's loop orientation
summed it by hand with a wrapped index; they take it from the Ring
(the half is exact, and two of them only read its sign).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Aabb3 from points; boxes built and asked through it

Aabb3 collects from points (skipping non-finite ones, as add does) and
gains inflated, contains and meets. Fifteen hand-rolled min/max folds
over points or boxes in kernel, doc and engine become collect or union,
and their "within tol of the box" tests become inflated(tol).contains.
blend's refused-edge boxes and naming's face index hold an Aabb3.

A NaN point is now outside every box, where the old negated
comparisons let it in; an infinite point no longer stretches a box.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Aabb2, the plane's box; 2D folds and box tuples use it

Aabb2 mirrors Aabb3 (collect, add, union, inflated, contains, meets)
and adds relative, a point's place in the box. sketch's link and
link_loops each had that formula; link_loops' boundaries, prism's
segment and loop boxes, profiles' shape boxes and grid, and ends'
segment box hold an Aabb2 instead of a (low, high) pair. Folds in the
cam, sketch bounds, sheet's perforation grid and the sketch clipboard
collect one.

Boxes are built from the same terms (a round's box keeps c - r - tol).
As with Aabb3, a NaN point is outside every box and an infinite point
no longer stretches one.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* kernel: prism's segment boxes are plain Aabb2s

The SegBox alias named a (low, high) pair; Aabb2 says it itself.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Chain::bounds is an Aabb2; the boxes #2382 left as pairs follow

Chain::bounds returns an Aabb2. Its callers keep it: sheet's hole and
cut boxes (loop_box), letter boxes, island outlines and line-near-cut
test use meets, contains and inflated; profile's outline overlap and
max_clearance, profiles' box tests and the cam test read its corners.
flat_size and the flat pattern's JSON size are the union of the loops'
boxes (0 × 0 for no loop, where the pair fold gave -∞).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Aabb3::intersection; hand-grown and hand-met boxes use the box

Aabb3::intersection is the box both hold. ops' four overlap boxes of a
boolean's operands take it, and seven boxes grown by hand (ops' body
boxes, the distance set's bounds, coplanar's face box, eval_more's
padded mesh box, compare's group and region boxes) call inflated with
the same amount on every side.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-20 03:44:49 +00:00
Thodoris Tsagkogeorgas de7fabc3bc Preferences: a Plugins page lists installed plugin folders (#2718)
* Preferences: a Plugins page lists installed plugin folders

Each folder under the per-user plugins directory that has a plugin.json
appears in Preferences. Turning one off is saved with the other settings.
The page reads the manifest and does not run any code from the folder.

* Retrigger checks after the cancelled run

The required ci check failed because the workflow was cancelled before
any job started. This commit does not change the plugins page.
2026-10-20 03:38:47 +00:00
Igor Bronovskyi 1b6c10f6e0 Translate the Ukrainian catalog messages added after #1632 (#2569) 2026-10-20 03:36:01 +00:00
Nathan Dane 25ea9e6419 icons: add the silhouette master and wire it to inspect.silhouette (#2102)
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-20 03:25:17 +00:00
cronos b4520d265e perf(ui): show sample thumbnails immediately and reuse Recent previews (#2944) 2026-10-20 02:33:35 +00:00
Colin Faulkingham b622a46624 Fix large modeled threads and thin crest reconstruction (#2209)
* Fix large modeled threads and thin crest reconstruction

Helix stations follow the pitch (radial chord error under 1% of it, 48 to
720 stations), and the faceted rebuild retries at the BSP's precision when
the usual weld tolerance collapses a thin crest facet.

Rebased onto main as one commit (the branch's own commits touched UI files
that later moved to #2263 and #2264). Adapted to main's UnitVec3 thread
axis: `*k` in thread_groove and `*cylinder.axis` in the new flange test.

* Fix icon review revisions for same-timestamp edits
2026-10-20 00:06:44 +00:00
amolinari-autotex b2622325a1 i18n: fill missing Italian catalog entries (#2389)
Translate 21 messages while keeping Italian partial and preserving existing translations and catalog guards.

Co-authored-by: Copilot App <223556219+Copilot@users.noreply.github.com>
2026-10-19 23:56:17 +00:00
shop-3d 44cbd7ae73 I18n danish (#2671)
I18n danish.
2026-10-19 17:23:00 -04:00
amolinari-autotex 0b787f8eae Show and edit standard part configurations (#2680) (#2681)
Thanks @amolinari-autotex.
2026-10-19 17:07:01 -04:00
rlartot 750e08aab7 Sketch palette: a new empty sketch is not "Fully constrained" (#2906) (#3011)
* claim: #2906

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01X2qZQXd3qSwu9mzaYcB9yW

* Sketch palette: an empty sketch says "No geometry yet", not "Fully constrained" (#2906)

A new sketch has no degree of freedom (only the fixed origin), so the
palette read it as fully constrained. With no drawn curve or 3D curve it
now shows "No geometry yet" and not the fully-constrained styling.
Adds the message to the English, Japanese and Chinese catalogs.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01X2qZQXd3qSwu9mzaYcB9yW

* i18n fr: Aucune géométrie pour l'instant (#2906), à valider avant push

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01X2qZQXd3qSwu9mzaYcB9yW

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-19 16:12:10 -04:00
rlartot 7ce9c29f95 French catalog: catch up on 46 new messages (#3136)
Adds the 46 missing French messages.
2026-10-19 16:11:44 -04:00
vandang890615 72601e678a i18n: add Vietnamese (vi) localization support (#2915)
* i18n: add Vietnamese (vi) localization support

Add Vietnamese (vi) message catalog with 1,583 translated keys covering CAD modeling commands, UI dialogs, timeline, analysis tools, and AI agent chat.

Register VIETNAMESE catalog in ui-egui/src/i18n.rs and add unit test verifying translations, labels, and dynamic browser naming.

* chore: attribute Vietnamese locale and sort catalog

* i18n: fix corrupted and half-English strings in Vietnamese catalog

* i18n: polish residual command and UI translations in Vietnamese catalog
2026-10-19 16:09:36 -04:00
NOWN-DEV 539c17b425 Joint sweep: drive a joint until parts touch, and report where (#1981)
Joint sweeps can stop where parts touch and report the contact and remaining room.
2026-10-19 16:07:44 -04:00
The Nomad d3fa22e987 3D mouse calibration in Preferences (#2326)
Adds a 3D mouse calibration section to Preferences (#1463).
2026-10-19 16:07:38 -04:00
DuBearte a9c7616e7f Lines thinner than a pixel no longer vanish without multisampling (grid lines, #2823) (#2871)
* claim: #2823

* fix(view): lines thinner than a pixel no longer vanish without multisampling (#2823)

A line quad narrower than a pixel covers no pixel centre when it falls between
two rows, so the grid's 0.7 px lines came and went as the view zoomed where the
viewport draws without 4x MSAA (some browsers and devices). Such lines are now
drawn a pixel wide, faded by the width they lack.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-19 16:05:56 -04:00
HiroKenEz 45d0b6053b Icon tools: hashes and palette revisions ignore CRLF checkouts, text I/O is UTF-8 (#1930) (#1931)
On Windows, Git's default core.autocrlf checks the icon masters and the
palette out with CRLF, and `cargo xtask icons` failed four ways:
- the accepted-icon hashes (lint_icons.py and the review page's
  review_state.master_hash) were taken over the files' bytes, so every
  accepted icon read as changed; both now use master_hash, which hashes
  the text with CRLF read as LF;
- icon_palette.revision hashed the bytes while save_colours hashed the
  text it read, so every palette save was refused as stale; revision now
  reads the text too;
- the tools and their tests read and wrote text in the locale's encoding
  (cp1252 can't write U+2194); they now say utf-8;
- the icon inventory listed UI files with backslashes; it writes /.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 16:04:49 -04:00
NOWN-DEV 99d8d382b9 Bill of materials: part properties on components and assembly.bom (#1888) (#1899)
* Bill of materials: part properties on components and assembly.bom

A component definition now carries part properties (part number,
description, revision, other tools' keys) and free text properties,
saved with the component and shared by its occurrences.
component.metadata and component.metadata.set read and change them in
one undo step; Paste New copies them; parts.insert numbers standard
parts from their standard and size, and parts.resize renumbers them.

assembly.bom counts the placed components (flat: parts at any depth
through their subassemblies; top: direct children), grouped by part
number or by definition, sorted by part number, and writes CSV (fixed,
quoted columns) or JSON. The app gets a Bill of Materials window on the
INSPECT panel that lists, edits and exports the rows.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Bill of materials: name a merged row's equal definitions once

Two standard parts with the same size are separate definitions with the
same name; their row now reads "SHCS M6x20" instead of repeating it.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Window widths test: close the Bill of Materials window between commands

The test closes the floating windows a command opens before starting
the next one; the Bill of Materials window was left open and measured
against the next dialogs' limits.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Bill of materials: sub-parts in their part's row, and part properties without re-evaluating

assembly.bom takes group_children: true. A part with a part number keeps
what is placed inside it (a bolt's washer and nut) in its own row, listed
under it as children (items 1.1, 1.2, with each and count) instead of rows
of their own; bolts with different contents stay different rows, and
total_occurrences is the same either way. The window has a switch for it
and shows the children under their part; the CSV lists them after their row.

Changing part properties re-evaluated the model, re-seated every joint and
rebuilt the placed model: 361 ms per change with 30 jointed bolts. A change
that only touches components' metadata and properties now takes the same
path as a render-only change (proved on the whole Document), also for its
undo and redo: 0.6 ms.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Bill of materials: look the structure up once, not per subassembly

Deciding whether a subassembly is a part (it has bodies of its own) scanned
every body of the model for each subassembly, and each body looked up its
feature by a linear search of the timeline: subassemblies × bodies × features.
assembly.bom now indexes the placements, the body owners
(Document::body_owners: one pass over the bodies with the timeline in a map,
the same rule as model_body_component) and the numbered components once per
call. 600 bodies and features with 60 subassemblies: 8.1 ms → 1.3 ms; the
old cost grows with the cube of the design's size.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 16:04:39 -04:00
William Dunn d8d04c9009 Tool modifiers: shared resolve, classic defaults, preview-safe Ctrl (#1616)
* Centralise tool modifiers with classic defaults and preview-safe Ctrl.

Route sketch/selection chords through a shared resolver. Keep Alt snap
suppress and dual toggle as defaults; optional Shift add-only and Ctrl
snap mapping. Skip preview rollback while a manipulator drag is active.

* Address #1616 review: classic snap suppress, single viewport owner, docs.

Default suppress to Ctrl/Cmd or Alt; drop navigation set_suppressed; remove unused label_key; add preview rollback gate test; document sketch modifiers.

* fix(#1616): correct Modifiers primary in tests; simplify rollback fixture.

* Treat Ctrl as primary off macOS, and rustfmt the modifier files.
2026-10-19 16:04:28 -04:00
Irakli Kourtis 1cd9983c8f Surface trim: projected curves, several kept regions, mutual trim (#767) (#1466)
* kernel: trim keeps picked regions, mutual trim, curves swept along a direction (#767)

Trim moves to surface_trim.rs: TrimKeep::Side (the old behaviour) or
Regions (the connected pieces the points pick, parted where the tool runs
along an edge). mutual_trim cuts two one-face surfaces by each other's
surface, extending one that stops short when asked. SplitTool::Curves takes
a sweep direction; a closed curve's field is signed by inside/outside
instead of extending its end segments.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* kernel: classify display edges of a face with a closed-edge hole without a panic

A hole cut by a closed curve is a loop of one edge that starts and ends at
one vertex; mapping the face rebuilt that edge through a check that
panics on it (the guard caught it and dropped every smooth flag of the
body). Such faces are now left out of the ruled-surface test.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* surface.trim: keep several regions, trim by projected sketch curves, mutual trim (#767)

keep takes a list of points (the regions they pick); curves: {sketch,
curves?, direction?} sweeps sketch curves onto the surface (along the
surface's normal: not supported yet); with + keep_with trims two
surfaces by each other, extend? meets a short one, stitch? sews the
kept pieces. Trimmed faces carry their lineage, so they are named
after the faces they are pieces of. New fields noted in a pending format file.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* Trim dialog: sketch curves as the tool, several keep points, mutual trim (#767)

The tool input takes sketch curves too; keep points are places (several
on one face add up); another surface with its keep points makes a mutual
trim with Extend to meet and Stitch toggles. Edit Feature brings it all
back. Labels in every locale catalog.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* ROADMAP: M8 trim by projected curves, several regions and mutual trim (#767)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

---------

Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 16:04:02 -04:00