f4d937d8a298f9bd930d8a430d82de2ec00e02bb
19 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
b671265faa |
Viewport: show the running tool's icon beside the pointer (#4869) (#4870)
* Viewport: show the running tool's icon beside the pointer
While an interactive tool or a command's dialog runs, its toolbar icon
rides above and right of the pointer in the viewport, so the next click's
command is visible without looking up at the ribbon. It sits clear of the
system arrow and of the sketch tools' coordinate readout below the
pointer, moves left at the right edge and below the readout at the top.
It shows only where a click reaches the model: not over panels, dialogs,
menus or the navigation bar, and not while the camera moves. The icon is
the command's own (the one the ribbon and the dialog header show), so
there is no new artwork. On by default; "Show tool at cursor" in View
settings (`ui.set {"toolCursor": false}`) turns it off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Viewport: the tool at the cursor is off by default
As asked in review: the badge starts off, and "Show tool at cursor" in
View settings (or `ui.set {"toolCursor": true}`) turns it on. The test
checks the default and turns it on through the View settings checkbox.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
|
1236863b17 |
Coil: its parameters show and can be edited (#3862) (#3915)
* claim: #3862 * Coil: its parameters show and can be edited (#3862) The Coil dialog now shows every setting solid.coil takes: the section (circular or square), where it sits on the diameter (inside, center or outside), the start angle and a Clockwise option. Edit Feature on a coil reopens the dialog filled in from the feature, and OK redefines it; before, it fell back to a timeline.edit line in the command search. Settings left at their default are not sent, so OK on an unchanged edit keeps the coil as it was. |
||
|
|
9e6e0b8df1 |
Render workspace: complete experimental ribbon, resources and effects integration (#5493) (#5494)
* wip(render): reconcile completed material and image pipeline source with 0.20 (#5493)
Source-only integration reference for staged review, not a merge-ready aggregate.
Donor: 0xlillith/solidcraft@aea20b0115.
Upstream:
|
||
|
|
1f6a2d4daf |
3D mouse: driver choice, guided calibration, button mapping and a picture of the device (#1463) (#3825)
* Add a small test boat to steer around with the 3D mouse A little hull in its own camera, drawn by the UI itself and not the CAD viewport, so a 3D mouse can be tried out without opening a design. It brings the model (generated by assets/models/make_test_boat.py) and the tests for how the camera moves it. Nothing uses it yet; Preferences picks it up with the rest of the 3D mouse work. * UI kit: keep a choice row from flipping with the scrollbar A choice row picks segments or a dropdown by whether its labels fit. A page scrollbar that comes and goes narrows the row by its own width, so the row could flip back and forth between the two on a page that sits right at the edge. It is now judged on the whole row and through a small helper, fits_steadily, that only changes its answer once the miss is wider than the scrollbar. Also tests for that, for typed numbers in a slider's value box, and a test hook to put up the issue-report input barrier by hand. * 3D mouse: device model, guided calibration, buttons and a picture The 3D mouse becomes a device we know something about instead of six raw numbers. The reader picks between spacenavd and the direct hidraw driver, falls back from one to the other, and says so when it can't open the device. Guided calibration asks whether the device is a spring cap or a trackball, adds a touch step, and uses a settle filter so a ball let go of stops reading as motion. Buttons get jobs (keys, held modifiers, commands), saved per device, with defaults for the SpaceMouse Pro. Preferences gets a picture of the device that moves as it does, next to the test boat, and the same picture can sit in the 3D view at Left Viewport, Right Viewport or Left Window, above the floating History card like the legend and readouts. These ride together because the crate's calibration types, the Preferences page, the Linux reader and the button hook all use each other. * 3D mouse: offer to calibrate an uncalibrated device When a 3D mouse shows up that has not been calibrated, a card in the 3D view offers to calibrate it, to swap drivers when the other one would work better, to close, or to never ask again. It is made once per device, goes away after 30 seconds in view, and gives way to a status or computing toast instead of stacking on it. The card is the shared toast, which now takes buttons: they group by purpose, wrap inside the card at narrow widths, and do nothing while an issue report holds CAD input. The picture of the device in the 3D view keeps clear of the card. * 3D mouse: translations and attribution The 3D mouse strings (ui.3d_mouse_*, the calibration steps and the offer card) in every shipped language, the Japanese catalog note, and the credit for the test boat model in ATTRIBUTION.md. This is last because the code before it only looks keys up: it builds and runs without these, falling back to English until they land. * 3D mouse: draw its preferences with the settings kit like the rest of Navigation The 3D mouse section was a folded header with its own layout. It now uses the same kit as the sections above it: a settings_section card, settings_form rows with the shared label column, dividers between the device, axes, picture and buttons groups, Text::Hint for the helper lines, and settings_control_width for the dropdowns. The section is open like every other one (the header still folds it), so the device badge on the folded header is gone; the calibration row already names the device. Every setting, string and key is unchanged. Tests that unfolded the section no longer click it, and the hint lines are looked up as hints instead of notes. * 3D mouse: show each axis's live tilt in Preferences, like main's axis rows Each view axis row is main's axis row again: a meter that follows the tilt of the motion driving it, with the dead zone marked, next to Invert, Speed and the "driven by" menu. The meter reads the calibrated travel when the device has a calibration and the raw reading over full scale when it does not, and asks for a frame whenever the reading changes. The helpers are back as they are on main, and the calibration state is a badge by the enable toggle. * 3D mouse: line its preferences up with the rest of Navigation - The two checkboxes sit side by side in the same two-column grid as Wheel and trackpad. - Row labels stop repeating "3D mouse" and use sentence case: Calibration, Driver, Restore defaults, Reset view, Left viewport, Right viewport, Left window. - Hints line up under the control column instead of the left edge. - The six view axes are named Pan X, Pan Y, Zoom, Orbit X, Orbit Y and Roll so they fit the name column. - Buttons are a divider and rows in a form like the other groups, without the bold sub-heading. - The driver, dead zone, axes, picture and buttons sit behind a collapsed Advanced section, since most people never touch them. * 3D mouse: tidy the Advanced test for clippy |
||
|
|
27d2fe6ec0 |
Frames: profile library, members along frame sketch lines, and the Frame Member dialog (#4003) (#4004)
* claim: #4003 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Frames: the profile library (#4003) The first slice of frames and weldments: the cross-sections structural members will be made of, each SolidCraft's own parametric definition built in code (no vendor or standard size tables are shipped). - solidcraft_doc::frame: bar, round bar, rectangular and round tube, angle, channel, I-beam and a generic T-slot extrusion as exact line/arc regions, with defaults worked out from the profile's size, refusals that name the dimension that does not fit, anchors and placement, and exact section properties (area, centroid, Ixx/Iyy/Ixy by Green's theorem). - frame.profile.list, frame.profile.properties (with mass per metre for a density) and frame.profile.insert (draws a profile into a sketch, locked by default, at a point, anchor and angle). - Tests against hand-computed values (rectangles, circles, composite rectangles by the parallel-axis theorem, fillet spandrels), hostile input, extrusion volume, undo; catalog entries in every locale; docs/frames.md; ROADMAP M15. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Frames: drop the built-in T-slot profile (#4003) Aluminium extrusions and other vendor sections come from the user's own sketch (drawn or inserted from the vendor's DXF), so the library keeps the plain steel shapes only. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Frames: members along frame sketch lines (#4003) frame.member lays one body per straight line of a frame sketch (2D lines or 3D sketch lines), its cross-section square to the line from end to end: - profile: a built-in profile, or profile_sketch, a sketch whose material (nested loops alternating, so two circles make a tube) is the section in its own x and y around its origin; profiles picks override it. - anchor (origin, centre, centroid or a bounding-box corner or edge middle), angle (an angle expression, so a parameter), mirror. - Orientation: the profile's y as near world up as the line allows, x square to both; a vertical member's x is world X (frame::member_axes). - Members follow sketch and parameter edits, undo as one step, save and reopen (format: pending/frame-members.rs), and are named after the profile (Rect Tube 40x40x3, (2)…), numbering on past names already taken. Tests against hand-computed volumes and bounding boxes (rectangle, 3D tower lines, parameter edit, sketch tube profile and picks, anchor/angle/ mirror), refusals, undo/redo and reopen; walk fixtures and goldens; docs. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Frames: fixes from the adversarial review (#4003) - Default member lines are what was drawn: projected and other linked curves and 3D wires (a face sketch's edges) and lines of no length are left out. - A profile sketch's material starts from its drawn profiles, as solid.extrude's "all" does, so a section sketched on a face works; the even-odd test uses outlines and boxes worked out once, capped at 256. - Member names are pinned to their lines (`names`, by line id; `body_name` is the base): deleting or adding a line, or deleting another feature, no longer renames other members, and frame.member stores every name it gives. body.rename renames a member on its line (also for later member features); a copy whose body_names were set still names its members by position. - Built-in profile dimensions are expressions (ProfileSpec): they follow parameters, bare numbers take the design's units, and they are feature inputs. frame.profile.properties/insert read them the same way. - Default root/toe radii shrink to the room a thick section leaves; radii given are checked by name; a radius must be 0 or at least 0.01 mm; error messages report the wall or flange value given, not twice it. - A line within 1e-6 rad of vertical orients as vertical, so rounding never turns a post a quarter turn. - A 2D frame sketch in a differently placed component is mapped into the member's frame, and member features recompute when placements change. - Caps before lookups for a design's `lines`; a line listed twice is refused; a 3D wire that runs back on itself is not a line. Regression tests for each, from the review's scenarios. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Frames: the Frame Member dialog on the ribbon (#4003) - Frame Member (MODEL > Create) opens a dialog: the frame sketch's lines picked in the view (or All Lines), a built-in profile and its dimensions or a section picked in another sketch, anchor, angle, mirror and name, with a live preview. Edit Feature reopens it filled in. - Lines picked in the view keep their sketch (a SKETCH_LINES input picks ExternalSketchCurve): line ids are each sketch's own, so two 3D sketches both have a `w2`, and the members went on the newer sketch's lines. - timeline.redefine takes frame.member. Members keep their names through an edit unless it gives them a new body_name; frame.member takes `names`. - A member whose section is a whole profile sketch keeps it when edited (the dialog shows the sketch instead of picking every region, which would fill a tube's hole). - An original frame_member icon, open for review, on the ribbon, timeline and browser. - The angle profile is listed as L-Angle, and web and flange as Web/Flange thickness, so they translate apart from the existing Angle, Web and Flange; the dialog's labels are in en, ja and zh. en-GB no longer repeats the frame command labels it spells the same. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
769dfff1a5 |
Section Analysis: a Hatch option (#4563) (#4565)
* claim: #4563 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Section Analysis: a Hatch option, off for a plain cut in the body's colour (#4563) The Section Analysis dialog gets a Hatch check box beside Flip, and inspect.section a hatch?: bool (default true), so scripts, the CLI and the control channel reach it too. Hatched, a cut is its body's colour tinted toward the cap colour with 45 degree stripes, as before; off, it is the body's own solid colour. The viewport (cap alpha in the uniform), the CPU rasterizer and ui.render follow it, and the section keeps it when hidden and shown again or edited. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
867df396ea |
Agent chat in the Flatpak says why no agent is found and how to allow one (#4765) (#4769)
* claim: #4765 * Agent chat: explain the Flatpak sandbox when no agent is found (#4765) In the Flatpak the sandbox has no home-folder or network access, so agents installed through nvm or ~/.local/bin are never discovered and the chat only said that no agent was found. With FLATPAK_ID set and nothing discovered, the picker and Preferences > AI now say why and offer the exact `flatpak override --user ai.storyteller.solidcraft ...` command with a Copy button. The message is in every catalog, and docs/agent-chat.md gains a Flatpak section listing what each permission is for. The manifest is unchanged. |
||
|
|
0c72ad56d2 |
An idle window draws nothing with the frame-rate readout on (#5165)
The viewport's frame-rate readout asked for a new frame every frame, so with it on an untouched window redrew as fast as the display allowed and kept the GPU busy: 77% GPU at 60 fps on an M1 with a 5K display showing the sample, against 0% with the readout off. It now asks for no frames of its own and shows how often the view really draws; one frame a little over a second after the frames stop shows the view idle at 0 FPS. The preference's note no longer says the view redraws continuously. The status toast also asked for a frame every half second for the six seconds it shows; it now asks for one frame, when it is due to go. |
||
|
|
f79cbc216c |
Redesign the home page as the File view (#2027) (#3822)
* claim: #2027 * Redesign the home page as the File view (#2027) * Match the File view with the accepted component design (#2027) * Restore the Start subtitle and simplify the recovery icon (#2027) * Integrate File view with main's shared UI containers |
||
|
|
4b23bb3a03 |
Implement compact workspace layout (#2029) (#4533)
* Vertical history strip: left of the browser, compact rows, hollow-circle marker, collapsed rail hover * Vertical history strip: seam handle to expand and collapse names, drag to resize with snap * Vertical history strip: no empty gap below the transport * Show the history seam arrow only on hover (#2028) * claim: #2021 * Redesign the Assistant chat panel with shared UI components * Show Assistant in the shared floating panel shell * Extend floating Assistant to viewport height and shift navigation * Dock Assistant before history and match docking preview bounds * Align Assistant top margin with floating shell cards * Extract a shared panel drag grip * Rebuild responsive history sizing and three-way docking * Share browser and History collapse hover styling * Show the History title as soon as its text fits * Animate stacked browser and History expansion and collapse * Make panel folding responsive and independent of frame delays * Let folding panel contents shrink continuously to header height * Use four explicit History transport actions in every layout * Resize the shared Browser and History column from either card * claim: shared compact-mode containers (#2029) * Centralize layout-aware UI containers and enforce their use * Keep docked Assistant at the outer edge beside tool sheets * Use shared surface policy for Assistant tool space * Let tool sheets drag over shell panels while avoiding Assistant * Update Parameters drag bounds assertion for shell overlap * Keep dragged tool sheets below ribbon and workspace selector * Enforce universal UI containers in mandatory repository checks * Remove legacy report windows and require shared window composition * Remove retired UI styling and require shared controls * claim: compact layout preference (#2029) --------- Co-authored-by: bherbruck <brennen.herbruck@gmail.com> |
||
|
|
920398ac53 |
Bring back the view-change glide; orbit, pan and zoom stay instant (#4596)
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com> |
||
|
|
ba4f7864ff |
Export Current View as DXF includes shown sketches (#3708) (#3780)
* claim: #3708 * Export Current View as DXF includes shown sketches (#3708) The view export refused a design with only a sketch and left shown sketches out when bodies were present. It now draws the sketches the viewport shows (profile curves only: no construction geometry, points, dimensions or constraints) on a SKETCH layer, one entity per curve. Finished sketches are hidden behind bodies through the body-edge occlusion; the active sketch is drawn on top, as in the viewport. Sketch points use the same projection, budgets and cancellation. The export is refused only when there is neither a visible body nor a shown sketch curve; the dialog and the command share that check (cmd::view_dxf_exportable). --------- Co-authored-by: bherbruck <brennen.herbruck@gmail.com> Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com> |
||
|
|
63f210b49f |
Restyle the vertical history sidebar (#2028) (#3953)
* Vertical history strip: left of the browser, compact rows, hollow-circle marker, collapsed rail hover * Vertical history strip: seam handle to expand and collapse names, drag to resize with snap * Vertical history strip: no empty gap below the transport * Show the history seam arrow only on hover (#2028) * Extract a shared panel drag grip * Rebuild responsive history sizing and three-way docking * Share browser and History collapse hover styling * Show the History title as soon as its text fits * Animate stacked browser and History expansion and collapse * Make panel folding responsive and independent of frame delays * Let folding panel contents shrink continuously to header height * Use four explicit History transport actions in every layout * Resize the shared Browser and History column from either card |
||
|
|
cb3cabeda1 |
Remove camera animation: every view change and orbit applies at once (#4296)
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com> |
||
|
|
a9aab13d92 |
Translations: complete Ukrainian, French, Danish (#3802)
The added strings are machine translated; native speakers, corrections are very welcome. |
||
|
|
c78095ccde | Fix UI stack integration after rebasing on main | ||
|
|
dad56187df | Cleanup after the popup move (step 7 of #2016, after the panels PR) | ||
|
|
2061ad1694 |
i18n: add missing Danish translations (#3028)
* i18n: add Danish (da) UI translation * i18n: refine Danish part properties wording * i18n: sort Danish catalog in canonical key order |
||
|
|
44cbd7ae73 |
I18n danish (#2671)
I18n danish. |