Commit Graph

2732 Commits

Author SHA1 Message Date
semmelrinde fed9605357 Sketch: the status in the view and the browser's editing mark in the user's language (#8084)
* Sketch: the status in the view and the browser's editing mark in the user's language

While a sketch is edited, the view's corner said "Sketch1 — 2 degrees of
freedom" (or "fully constrained", "constraints conflict") and the
browser marked the sketch "(editing)" or "(attachment lost)", in
English whatever the language; one degree of freedom read "1 degrees of
freedom". They now take messages: the catalogs' existing degrees-of-
freedom ones and four new ones.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch status and editing mark: the sketch's default name as shown elsewhere

The browser shows a default name in the user's language ("Skizze 1")
except on the edited sketch's row, whose mark made it a different text;
the view's status kept the stored name too. Both now use the name as the
browser shows it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 12:13:38 +00:00
semmelrinde bf1886e90a Motion dialogs: translate the notes and refusals they draw themselves (#8096)
Motion Study, Motion Trace, the motion plot, Explode and the contact
check drew their notes and refusals as they got them ("add a key for a
joint first", "select a point on a component", "none"), so they read
English in every language. They now go through the label translator, and
the four that no catalog carried get messages.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 12:13:38 +00:00
phanoob dfa9afd39f Sketch: leaving a sketch opened inside a component gives the active component back (#8127) (#8157)
Double-clicking a sketch row inside a component (an inserted fastener's sketch)
activates that component so the sketch is edited in its placement. Finish and
Cancel only closed the sketch, so the component stayed active and every other
body stayed faded.

Edit Sketch now remembers the component and placement active before it
activated the sketch's own (also when sketch.edit activates the component of a
face-attached sketch), and leaving the sketch makes that one active again, as
Finish already puts the history marker back. A component activated while the
sketch is open stays active.

Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 12:13:15 +00:00
semmelrinde 944c658c90 Czech: translate 867 messages the catalog was missing (batch 1) (#8188)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 12:12:06 +00:00
semmelrinde 8f8df03358 Navigation: Maya and HFSS mouse presets (#6474, #2742) (#8184)
Maya moves the camera with Alt and any button (left orbits, middle pans,
right zooms), middle drag also pans. HFSS pans with Alt+left drag and zooms
with Shift+Alt+left; its Ctrl+left orbit is the drag from empty space every
preset already has, so a Ctrl+click on geometry still adds to the selection.
The help texts are in the catalog for every locale that has the other
presets' help.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 12:12:05 +00:00
github-actions[bot] 92fc868aa9 Regenerate generated files and fold pending files [skip ci] 2026-10-28 13:22:20 +00:00
github-actions[bot] 33281cf3bc Regenerate generated files and fold pending files [skip ci] 2026-10-28 13:13:50 +00:00
semmelrinde d64816437a Dutch: translate 942 messages the catalog was missing (batch 1) (#8172)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 12:12:02 +00:00
semmelrinde 8210e94b6d Malay: translate 888 messages the catalog was missing (batch 1) (#8216)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 12:11:08 +00:00
semmelrinde f6d969f98a Hungarian: translate 946 messages the catalog was missing (batch 1) (#8199)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 12:11:06 +00:00
dudedagger42 59faca3850 Canvas and Decal: send the picked face, so a large design takes the image (#5592) (#5593)
* claim: #5592

* Canvas and Decal: send the picked face, so a large design takes the image (#5592)

A click with Canvas or Decal sent only the point, so the engine searched every face of every
body for it and gave up on a large design ("face capture work limit exceeded"). Send the
picked body, face index and path as Create Sketch does; canvas.decal takes that face pick too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Canvas and Decal test: drop the check that a point alone gives up

On upstream main a sketch on a face by its point alone no longer gives up on this design, so
the test keeps only what the picked face has to do: both images land on it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 12:11:01 +00:00
semmelrinde 29a2f33664 Galician: translate 888 messages the catalog was missing (batch 1) (#8214)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 12:10:58 +00:00
sascha2101 9d4d7932ee Sketch: offer an arc length dimension for a selected arc (#6039) (#6264)
* claim: #6039

* Sketch: offer an arc length dimension for a selected arc (#6039)

The arc length dimension already existed in the engine (sketch.dimension with
type arc_length), but nothing in the UI led to it: the Dimension tool and the
context menu always gave an arc its radius.

With exactly one arc selected, the sketch context menu now offers Arc Length
Dimension next to Sketch Dimension, which adds the dimension through the
existing command.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FN5eEMrqWWXqi65FcK8GXq

* test: move the arc length menu test up to avoid a merge conflict

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: sascha2101 <221609842+sascha2101@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 12:10:45 +00:00
github-actions[bot] 54a207cb8b Regenerate generated files and fold pending files [skip ci] 2026-10-28 12:44:09 +00:00
github-actions[bot] 5bf5de49a5 Regenerate generated files and fold pending files [skip ci] 2026-10-28 12:35:35 +00:00
semmelrinde cee995e776 Norwegian Bokmål: translate 693 messages the catalog was missing (batch 1) (#8218)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 12:10:34 +00:00
Nathan Dane b86c75544e Appearance: read the look chain and replace a look everywhere in one undo step (#6428) 2026-10-28 12:10:31 +00:00
yhamil04 249318cffb Right-click opens the menu despite tiny pointer movement (#5517) (#7939)
* claim: #5517

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Right-click opens the menu despite tiny pointer movement (#5517)

A Magic Mouse moves the pointer a fraction of a point as it is clicked.
The right button orbited on any movement, and the menu needed exactly
zero movement in the release frame, so most right-clicks only nudged
the view. The right button now navigates once the press can no longer
be a click (egui's click distance and time), catching up with the
travel since the press, and a right-click is egui's click.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 12:08:27 +00:00
Colin Faulkingham 6f8ee10a86 Appearance: apply browser actions to all selected bodies (#7935) (#7941)
* claim: #7935

* fix: apply browser appearance changes to selected bodies (#7935)
2026-10-28 12:08:21 +00:00
N3MI-DG 30cb1238f7 Browser: reveal a placed body's row when it is picked or found (#7947) (#7948)
* claim: #7947

* Browser: reveal a placed body's row when it is picked or found (#7947)

The off-screen skip in `entry_row` keeps the reveal target's row alive so it
still has a rect to scroll to, but it matched `app.tree.reveal` (a world body
name) against `Entry::key` (the placement-local name). For a placed body those
never match, so the row returned early and the `scroll_to_rect` below it, which
does use `row_key`, was never reached. `app.tree.reveal` is then cleared at the
end of the frame, so there was no second chance.

Match the skip on `row_key` minus its `b:` prefix, as the `scroll_to_rect`
already does.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
2026-10-28 12:08:01 +00:00
raykholo db999b2a98 Control protocol: the ui.prefs settings as a sorted list, one per line (#7747) (#7988) 2026-10-28 12:07:43 +00:00
semmelrinde e59decda95 Primitive dialogs: label the size fields in words, not with the parameter names (#7995)
The Box, Cylinder, Cone, Sphere, Torus and Coil dialogs labelled their
size rows with the command's parameter names (length, top_diameter,
section_size), in every language. Each row now takes a message: Length,
Top diameter, Major radius, Section size, translated as the rest of the
dialog is.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 12:07:37 +00:00
github-actions[bot] aca80f2054 Regenerate generated files and fold pending files [skip ci] 2026-10-28 10:25:10 +00:00
Nathan Dane 0b2efd60b9 Render browser: scene tree with Environment, Lights, Shots and Objects rows, resolved appearances and a Browser selection (#6427) 2026-10-28 09:58:57 +00:00
amolinari-autotex 54f613e4dd Preserve linked component materials and appearances (#7609) (#7616)
* Fix linked component materials and appearances (#7609)

* Linked components: the cached link read carries the source properties

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Update Links: a link without recorded inherited properties is read again

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Preserve authored linked-face overrides and apply cached source properties

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 09:33:49 +00:00
github-actions[bot] ae07e36a7d Regenerate generated files and fold pending files [skip ci] 2026-10-28 07:57:59 +00:00
Nathan Dane 18fe82ab26 Render workspace: focus view, compact docks, a Browser chip at narrow widths and a localisation pass (#7376) 2026-10-28 07:29:53 +00:00
github-actions[bot] 372badfc1b Regenerate generated files and fold pending files [skip ci] 2026-10-28 06:43:04 +00:00
Nathan Dane 1781b4d323 Render workspace: move the Inspector or Browser dock to either side with view.render_dock and a header menu (#7230) 2026-10-28 06:15:13 +00:00
github-actions[bot] cf5dc813e2 Regenerate generated files and fold pending files [skip ci] 2026-10-28 04:43:28 +00:00
Nathan Dane b0c8c466b0 Navigation bar: icons for visual styles, selection modes and display (#6585) (#6898)
* Navigation bar: slot model and one-row renderer (#6585)

* Navigation bar: customisation section in Preferences (#6585)

* Navigation bar: icons for visual styles, selection modes and display (#6585)

* Navigation bar: redraw the Bodies, Parts and Components selection icons (#6585)

* Navigation bar: refine the Ground shadow, Ambient occlusion, Parts and Components icons (#6585)

* Navigation bar: solid cube and a longer arc for the Ground shadow icon (#6585)

* Navigation bar: the owner accepts the new icons as final (#6585)
2026-10-28 04:16:44 +00:00
github-actions[bot] 85aaed2ccb Regenerate generated files and fold pending files [skip ci] 2026-10-28 03:48:50 +00:00
Nathan Dane 110efa3598 Render: allow picking in the product view with a Body, Face or Component filter and outline the selection in the product pass only (#6426) 2026-10-28 03:20:43 +00:00
P'tite Tête 9fb41f8378 feat: Start a new selection's preview without waiting for the obsolete one (#7167) (#7261)
- Leave the running preview behind when the selection moves to another setup, asked to stop
- Keep at most two obsolete previews running; streaming, tools and other inputs wait as before
- Keep no result of a cancelled watched evaluation in the shared evaluation cache
- Test the detaching, the cancel reaching the spawned job, and the cache guard

Co-authored-by: P'tite Tête <asso@ptitetete.com>
2026-10-28 01:32:17 +00:00
bherbruck 79214b6b49 Release 0.25.1 (#7983)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 20:58:27 -04:00
github-actions[bot] 49c0faa7da Regenerate generated files and fold pending files [skip ci] 2026-10-28 00:50:43 +00:00
bherbruck 2cdfe050db Extrude to Object: a Join leaves the body it runs to alone when that body is in another component (#7975)
#6471 joined the body a To Object extent runs to into the tool, whatever its component.
A connector's boss extruded up to an enclosure's face (each in its own component) merged the
enclosure into the connector, and features referencing the swallowed body failed after it.
The body it runs to now joins only when it is in the feature's own component, or when the
feature names it as a target.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 20:48:28 -04:00
CamWight 303fddb20e Browser: Bodies folders only where they help: Always, Several bodies only (the default) or Never (#4217) (#4219)
* claim: #4217

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Browser: Bodies folders only where they help: Always, Several bodies only (the default) or Never (#4217)

A new preference on the Interface page, in the Layout section under Browser, sets when a
component's bodies sit in a Bodies folder of their own. Several bodies only lists a component's
lone body, when it has no groups, straight under its placement. Never lists every component's
bodies and groups there. Always keeps the folder as before. The design's own Bodies folder and a
folder hidden with its eye always stay.

One rule, browser::bodies_folded, decides it for the rows and for the menu. A folded folder
draws no row and stays open; its items move up one level, and their own eyes, hover and drops do
its jobs. While a folder is folded, its placement's menu takes the folder's Create Components from
Bodies and Group Selected; New Group and Show All were already there.

ui.prefs takes browser_bodies_folders (always, several, never) and refuses other values; saved
preferences read an unknown value as the default. The s37 scenario sets Always so that it still
checks the Bodies folder's chevron.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Browser: Bodies folders in Arabic, Hebrew and Vietnamese too (#4217)

Arabic, Hebrew, Japanese, Vietnamese and Chinese are complete catalogues, so
every_complete_catalog_carries_every_english_message fails a new message any of them lacks. The
preference's four messages get their Arabic, Hebrew and Vietnamese text, in the words those
catalogues already use for a body and a folder.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 00:24:17 +00:00
github-actions[bot] 03606ec97b Regenerate generated files and fold pending files [skip ci] 2026-10-27 23:59:03 +00:00
taylorhayis c4fb42f665 Preferences: search settings (#2218) (#6002)
* claim: #2218

* Preferences: search settings across every page (#2218)

A field at the top of Preferences filters the live controls with the same scorer as command search, including a dropdown's current value and the English source of a translated label.

* Preferences search: keep the plain page list for its tests (#2218)

The production dialog always draws the search strip, so the no-header entry is test-only and no longer warns as unused.

* Preferences search: show only the settings that match (#2218)

A page name or a loose string of letters was keeping the rest of that page on screen, including notes and the mouse legend.

* Preferences search: drop stray chrome and clear from the field (#2218)

The colour swatches and folded Advanced heading were painted on every query, and the field had no way to empty itself.

* Preferences search: fold shortcut matches and drop the blank gaps (#2218)

* Preferences search: stop unmatched pages painting over the hit (#2218)

* Preferences search: a page tab clears the search and shows that page (#2218)

* Preferences search: keep OK and the graphics checkboxes in view (#2218)

A dropdown that skipped its real height on a dialog's first frame left OK outside the window, and the search strip used up the rows the graphics page needs. The shortcut fold is in the UI kit gallery.

* Preferences search: type a query and open the match from the keyboard (#2218)

A printable key or Cmd/Ctrl+F focuses Search settings, arrows move through the matches, and Enter opens that row. Escape clears the query before it can close the dialog, and clearing returns to the page that was up when the search started.

* Preferences search: translate the search strings for the complete catalogs (#2218)

Arabic, Hebrew and Vietnamese are delivered complete, so Search settings and the empty result need a translation there. German and Korean get the same two strings.
2026-10-27 23:27:33 +00:00
yhamil04 00e31c24fd Sketch: Delete on a picked profile deletes the curves around it (#7107) (#7120)
* claim: #7107

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: Delete on a picked profile deletes the curves around it (#7107)

While a sketch is being edited, a profile picked by clicking inside a
shape stands for the curves of its outer loop, so Delete removes the
shape instead of failing with "a profile goes with its sketch". Holes
inside it are shapes of their own and stay. Outside the sketch a
profile still goes only with its sketch.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Delete a picked letter's whole text, not just its outline (#7107)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 23:04:41 +00:00
bherbruck 03b8f4138b New designs save as .sc; .solidcraft files still open (#7325)
* claim: new designs save as .sc

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* New designs save as .sc; .solidcraft files still open and keep their name on Save

DESIGN_EXT is now "sc"; DESIGN_EXTS lists sc, solidcraft and solvecraft and
every open path (dialogs, drag-drop, recent files, CLI, MCP, links, the web
picker) accepts all three. Save of an opened .solidcraft file writes that
file; Save As, autosave, recovery and crash reports use .sc. Windows, macOS
and Linux register .sc alongside the older extensions.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Update UI tests for the .sc default extension

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 22:41:40 +00:00
github-actions[bot] 613b468ef5 Regenerate generated files and fold pending files [skip ci] 2026-10-27 22:58:37 +00:00
yhamil04 c0a0da225a Ribbon tooltips: help for the Solid > Modify tools, and new toolbar commands must have it (#2758) (#7134)
* Ribbon tooltips: help for the Solid > Modify tools; new toolbar commands need it (#2758)

Writes the two-sentence help for the 16 Modify tools that had none (en, fr,
ja, zh), and adds a test that fails when a toolbar command has no help; the
190 older ones are on a backlog that only shrinks. AGENTS.md, CONTRIBUTING.md
and the Adding a command guide say so.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Ribbon tooltips: the help test reads the ribbon as the toolbar lays it out (#2758)

Review: commands placed by a workspace section without .at(...) were not
checked; 79 of them join the backlog. Physical Material's help no longer
promises the centre of mass.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Ribbon tooltips: French help uses the glossary terms (#2758)

Matériau, Apparence and Scinder, as rlartot asked in review; Delete Face
says the hole stays open.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Ribbon tooltips: the help rule fits the commands skill's size limit (#2758)

AGENTS.md became a router to skills on main, so the rule lives in
skills/solidcraft-commands/SKILL.md, kept under its 3600-character limit.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Ribbon tooltips: Arabic, Hebrew and Vietnamese help; the backlog follows main (#2758)

Arabic, Hebrew and Vietnamese are complete catalogs now, so the 16 texts
come in those too. Twelve toolbar commands that landed before the rule
join the backlog; the Render commands, which left the ribbon, leave it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 22:30:15 +00:00
bherbruck 03d0342469 Release 0.25.0: version bump, design format 41 (#7916)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 18:05:36 -04:00
github-actions[bot] 13d62705f3 Regenerate generated files and fold pending files [skip ci] 2026-10-27 21:51:37 +00:00
Frank 7fad8dbec0 Fix feature creation at timeline end (#7620)
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
2026-10-27 21:17:39 +00:00
Lars Jansen 83ac98ac76 Origin plane names: Top / Front / Right (#6491) (#6496)
* claim: #6491

* feat(ui): origin plane names Top / Front / Right (#6491)
2026-10-27 21:06:14 +00:00
sascha2101 42ec27cfe4 Browser with History under it: drag the split between the two cards (#7371) (#7803)
* claim: #7371

* Browser with History under it: drag the split between the two cards (#7371)

Under the browser, History took exactly half the column. The seam
between the two expanded cards is now a grip with the vertical resize
cursor; dragging it moves the split, as the column's right edge moves
its width. The split is kept as the browser's share of the column in
a new preference, browser_share, whose default is the equal split, so
nothing changes until someone drags.

Either card keeps at least its header and two rows. Folding either card
works as before and gives the other the rest; while one is folded or
folding there is no grip. A non-finite share falls back to one half.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FN5eEMrqWWXqi65FcK8GXq

* Prefs: keep the browser share with the History-under-browser settings

Moves the entry so it no longer sits next to the render and dialog
preferences that main added after browser_width.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: sascha2101 <221609842+sascha2101@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 20:59:38 +00:00
semmelrinde ca75f86947 Sketch: deleting a dimension in a rolled-back history no longer rebuilds the features after the marker (#7253) (#7425)
* claim: #7253

* Sketch: deleting a dimension in a rolled-back history no longer rebuilds the features after the marker (#7253)

The check before a delete evaluated the whole history twice when the
timeline was rolled back. Removing a sketch constraint changes the later
features' cache keys, so on a long history Delete on a dimension took
minutes. When the design differs only in sketch constraints (and model
parameters nothing uses any more) and each changed sketch solves to the
same geometry, profiles and ends, the features after the marker see the
same inputs: compare the live models only. Anything else still gets the
full check, so the report is unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 20:53:34 +00:00