Temporary changes to the octree:
- Changed frame from mesh to geom
Before change (tolerance 1e-3):
```
Simulation time : 2.34 s
Steps per second : 4275
Realtime factor : 8.55 x
Time per step : 233.9 µs
Newton iters / step : 2.26
Contacts / step : 3.69
Constraints / step : 14.76
Degrees of freedom : 12
Dynamic memory usage : 0.7% of 14M
```
After change (6 octree levels):
```
Simulation time : 2.24 s
Steps per second : 4472
Realtime factor : 8.94 x
Time per step : 223.6 µs
Newton iters / step : 2.47
Contacts / step : 3.37
Constraints / step : 13.49
Degrees of freedom : 12
Dynamic memory usage : 0.2% of 14M
```
PiperOrigin-RevId: 781019754
Change-Id: Ib15581244dfe9e571e1c6c2cac4a101cf3d8ba3d
Support actdim attribute on plugin actuators.
Remove the actuator_actdim callback. This callback leads to crashes when loading keyframes for models that have a stateful plugin.
PiperOrigin-RevId: 650649505
Change-Id: I40d1994d02ae4e20ce631b2702a984766cf2628e
Increased tolerance above zero in nutbolt.xml since now the two parts lock otherwise. Measured speedup of 2x in this example.
This solves the issue of scale-dependent step sizes. Tested on gears with 10cm diameter and 2cm thickness.
PiperOrigin-RevId: 584009449
Change-Id: Ied2f62dbbbc592470b91cf910f3553802a57c752
Change physical properties of `floppy_flex.xml` to resemble `floppy.xml`.
Make `Membrane` backward compatible with `Composite`.
PiperOrigin-RevId: 577190384
Change-Id: I5bc56ec62faa134156e839bec45d685c22eba5c4
When equality constraints and built-in passive forces are not present, edge Jacobians are unused. This gives a 3x speedup in `mj_kinematics` in `floppy_flex` (from 0.2ms/step to 0.06ms/step).
Changed the default options of `floppy_flex` to match those of `floppy` for a fair comparison.
PiperOrigin-RevId: 575850622
Change-Id: I4c618536fd17ef930153bbd1f1da7d9e0e44abbe
- Add bending passive force
- Add two examples (plate and poncho)
- Add stretching constraints for particles using tendons on mesh edges
PiperOrigin-RevId: 566980584
Change-Id: Id0cd8e1084c05560f1008518a8afbd5311d563e2
The following dependencies are disabled with a cmake patch file.
- Enoki
- OpenMP
- Assimp
- FCPW
PiperOrigin-RevId: 565352386
Change-Id: Icff9de68408e0afa2032bb83b24491fc4e41d181
- Memory heuristic rounds up to the nearest MB.
- `simulate` reports total memory currently allocated in the info box.
- All example models use `<size memory/>` rather than legacy attributes.
- Regenerated `example_saved.xml` and reformatted original model in [overview chapter](https://mujoco.readthedocs.io/en/latest/overview.html?#examples).
- `<size>` top-level section does not get written if empty.
PiperOrigin-RevId: 486702670
Change-Id: I0306e335f32344c59562ba606664ec9d2101f8a8
- Added new `cable` composite type:
* The `initial` parameter specifies the joint at the starting boundary: `free`, `ball`, or `none`.
* The boundary bodies are exposed with the names:`B_left` and `B_right`.
* The vertex initial positions can be specified directly in the XML with the parameter `vertex`.
* The orientation of the body frame **is** the orientation of the material frame of the curve.
- Added new `cable` passive force plugin:
* Twist and bending stiffness can be set separately with the parameters `twist` and `bend`.
* The stress-free configuration can be set to be the initial one or flat with the flag `flat`.
* New cable example showing the formation of plectoneme.
* New coil example.
* New belt example showing interaction between twist and anisotropy.
* Added test using cantilever exact solution.
PiperOrigin-RevId: 480033694
Change-Id: I491271bce8fccb185961477e903e5a72d172c8a3
Alessio Quaglino