- Memory heuristic rounds up to the nearest MB.
- `simulate` reports total memory currently allocated in the info box.
- All example models use `<size memory/>` rather than legacy attributes.
- Regenerated `example_saved.xml` and reformatted original model in [overview chapter](https://mujoco.readthedocs.io/en/latest/overview.html?#examples).
- `<size>` top-level section does not get written if empty.
PiperOrigin-RevId: 486702670
Change-Id: I0306e335f32344c59562ba606664ec9d2101f8a8
If given two non-decreasing values, `springlength` specifies a deadband for spring stiffness, inside of which the force is 0 and outside of which force behaves like a regular spring, with the setpoint corresponding to the nearest value. This can be used to create tendons whose limits are enforced by springs rather than constraints, which are cheaper and easier to analyse. See test/engine/testdata/tendon_springlength.xml example model.
Spring-limited spatial tendons whose lower range value is 0 are rendered as catenaries.
Fixes#520.
PiperOrigin-RevId: 484509706
Change-Id: I6698e94ee36168f52d501e83057559805e05172d
- `gain` was not inherited, either from `<adhesion gain>` default or from `<general gainprm>` default.
- `dyntype` was not inherited from `<general dyntype>` default.
- Reported by @vaxenburg.
PiperOrigin-RevId: 480707156
Change-Id: I0160531d48186e7658952e72923ceb6cb034be9b
- Added new `cable` composite type:
* The `initial` parameter specifies the joint at the starting boundary: `free`, `ball`, or `none`.
* The boundary bodies are exposed with the names:`B_left` and `B_right`.
* The vertex initial positions can be specified directly in the XML with the parameter `vertex`.
* The orientation of the body frame **is** the orientation of the material frame of the curve.
- Added new `cable` passive force plugin:
* Twist and bending stiffness can be set separately with the parameters `twist` and `bend`.
* The stress-free configuration can be set to be the initial one or flat with the flag `flat`.
* New cable example showing the formation of plectoneme.
* New coil example.
* New belt example showing interaction between twist and anisotropy.
* Added test using cantilever exact solution.
PiperOrigin-RevId: 480033694
Change-Id: I491271bce8fccb185961477e903e5a72d172c8a3
- Add private function `mj_arenaAlloc`. This is used internally to allocate memory from the arena.
- Add private function `mj_nefc` to count constraints. This function returns a tight upper bound on `d->nefc`. The number of counted constraints can be slightly bigger than exact `d->nefc` in the case of constraints with empty Jacobian, as when placing a frictional tendon between two world sites.
- Add new `memory` attribute to the `size` XML element for specification of arena memory size. This attribute is mutually exclusive with `nstack` and `njmax` specifications, which are now deprecated (but left around for the time being for legacy compatibility).
- Move `d->stack` to the end of the new arena space. The stack now grows in reverse from the end.
PiperOrigin-RevId: 479341539
Change-Id: Ie019c202e0908577ffc6f833a37920858116f667
- Adhesion actuator defaults were not parsed, now fixed.
- Both damper and adhesion actuators were requiring `ctrlrange` at parse time, which prevented this attribute from being inherited from defaults, now fixed.
- Added tests for all 3 cases.
PiperOrigin-RevId: 475145255
Change-Id: I8dd6196e20734136d990f522893ebd4d156cd7a8
This lets the compiler catch the mistake of creating an exception without throwing it.
PiperOrigin-RevId: 474536776
Change-Id: I5bd18258ce6ddd266adb1c852b1ba9e3063cd0b2
This is an amendment to 4bfc2c0311.
Add an autolimits compiler option. When true, *limited will be inferred from the presence of the *range attributes.
When false, models where limited is not specified, and range is will fail to compile.
PiperOrigin-RevId: 472438650
Change-Id: I489098e879ee695030f44e0d8cd969787e75fb90
- Added `refsite` attribute to actuators with `site` transmission.
- Such actuators now have a well defined length and can be used for e.g., Cartesian end-effector control.
- Added example models and documentation describing the new feature.
PiperOrigin-RevId: 471561218
Change-Id: I538f09af9600d5c53992c4a9fed325648aab4fa3
- `anchor` determines the point of wrench application, in the frame of body2.
- `tfratio` scales applied torques relative to applied forces.
- Add visualisation of both anchor points to both weld and connect constraints.
- Add a test model showing how the new weld parameters behave.
PiperOrigin-RevId: 470021901
Change-Id: I3faba0e5dcab2e29ee81096f5ff71ff66d99758c
- `anchor` determines the point of wrench application, in the frame of body2.
- `tfratio` scales applied torques relative to applied forces.
- Add visualisation of both anchor points to both weld and connect constraints.
- Add a test model showing how the new weld parameters behave.
PiperOrigin-RevId: 469228149
Change-Id: I836b0791f10fb624607a12ef3c687da991c21789
- `anchor` determines the point of wrench application, in the frame of body2.
- `tfratio` scales applied torques relative to applied forces.
- Add visualisation of both anchor points to both weld and connect constraints.
- Add a test model showing how the new weld parameters behave.
PiperOrigin-RevId: 469190483
Change-Id: I20f6da85b09cd2c4c0b5d29eb8003eabb524e55e
* If output file exists, ask user whether to overwrite
* Fix erroneous check for whether XML file was successfully saved
PiperOrigin-RevId: 468743682
Change-Id: I06058c498328d333792e4b40d65c3a99ca1842e4
- `distance` constraints were not very useful and increased the contact buffer within the constraint solver, violating a core design principle. Therefore they have been removed.
- The enum value `mjEQ_DISTANCE` is retained, but errors will be thrown in the parser and engine if these constraints are selected.
PiperOrigin-RevId: 467050101
Change-Id: Ie72a07e4fe338eea5107004a9fc0f5e47eb0c3b7
- Add `azimuth` and `elevation` to `visual.global`.
- Add `mjv_defaultFreeCamera`.
- Use `mjv_defaultFreeCamera` in `simulate`.
PiperOrigin-RevId: 465505244
Change-Id: I61e60f14a990d4e2d220958adb75c325001978ee
- Adhesion actuators using contact normals as force transmission mechanism.
- Related video: https://youtu.be/HdBue4MUZysCloses#229
PiperOrigin-RevId: 464389367
Change-Id: I9f69b3cd152d957e8f65870d208788463c036a6d
- Mesh inertias can now be computed exactly for well-formed (no holes) non-convex meshes.
- To activate this feature, set `<compiler exactmeshinertia="true">` (defaults to `false`). This default may change in the future.
- Added `<geom shellinertia="true/false">` (defaults to `false`). When true, geom inertia is computed assuming all the mass is concentrated on the surface, and `density` is interpreted as surface density (mass/area). Currently only mesh geoms are supported.
PiperOrigin-RevId: 464368395
Change-Id: I17afd99b9b221c9d24ae951f6e63d5c61ff89820
Yuval Tassa