* claim: #8318
* Preferences: the File view entry and the search field carry the window's name (#8318)
The File view's entry that opens Preferences said "Settings", and the window's
search field said "Search settings" / "No matching settings", while the window
title, the File menu and the help texts around the app say "Preferences". The
strings that name the window or point to it now use "Preferences"; ids unchanged.
Translations of these ids followed the English source and keep their wording
until the language teams catch up.
Tests: home::tests::the_entry_that_opens_preferences_carries_the_windows_name
and prefs_search::tests::the_search_field_names_the_window_it_searches fail on
main ("Settings" vs "Preferences") and pass here; the prefs_search:: and home::
suites pass, and the full solidcraft-ui-egui lib suite passed in `cargo xtask ci`.
* claim: #6901
* Feature windows choose Join, New Body or Cut from what the material touches (#6901)
Extrude, Revolve, Loft, Sweep, Coil and the Box, Cylinder, Sphere and Torus choose
their operation by running the Join on a copy of the design off the window thread
and counting the pieces: Join when the material makes one body with what it
touches, New Body when it would be a separate piece, Cut when it lies inside a
body (Revolve and the four primitives; Extrude keeps its own Cut). The choice
changes only when a check is in, a pick in the Operation row (the shown option
included) stops it for good, and OK waits for a running check. Hidden bodies take
no part: with some hidden, the shown ones become the feature's targets.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Operation row: a pick in Extrude stops its own choice at once; ja/zh strings, gallery entry
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Operation check: contact test first, mesh volumes for Cut, OK takes the evaluated Join
Material touching no body is a New Body without running the Join (the contact
test costs 0-240 ms where the Join costs seconds on a large body). Inside is told
from display-mesh volumes instead of exact ones (8 s on a 400-hole plate). The
check evaluates the Join through Session::ahead, and OK of the same commands
takes it (Session::prime) rather than computing it again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Preference: Choose the operation automatically (on by default)
Preferences > Design gets "Choose the operation automatically" (auto_operation,
on by default). Off, feature windows don't choose Join, New Body or Cut from
what their material touches: each keeps the operation it opens with (Extrude
its own Join or Cut), no check runs and OK doesn't wait for one, as before
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Arabic, Hebrew, Vietnamese and Turkish strings for the operation choice and its preference
Arabic, Hebrew and Vietnamese are complete catalogs now, and Turkish has a full
catalog, so this change's three strings get them too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Operation check: a closed window's check stops; the icon audit doesn't choose
A window's operation check kept running after the window closed, a Join on
the design for nothing, and the test harness waited for it after every step:
the icon audit, which opens every window, took ~30 min instead of ~1. The
check now runs under a Progress, and closing the window (or one that doesn't
choose) abandons it: its evaluation stops at the next feature and nothing
waits for it. The icon audit turns auto_operation off, as it only looks at
icons (75 s again).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Box placement test: the window keeps its New Body
The test #6248 added places a box that overlaps Base and expects a second body;
with #6901 the window would join or cut it. The test is about where the box
goes, so it turns auto_operation off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Join pieces: read the target lists leniently after the rebase
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #7717
* Stand-up offer: a note only when the part seems to lie on its back (#7717)
* Stand-up note: an unclear shape still gets the note
* Stand-up note: a Don't ask again button, as the dialog has
* Control protocol: the stand-up settings in the sorted ui.prefs list (#7717)
* Stand-up note: the control import test asks as before (#7717)
The test checks the caller's `up`, so it sets the setting to Ask and every
file from another program still gets the offer.
* claim: #6645
* Sketch: Center Point Arc follows the cursor clockwise or counter-clockwise (#6645)
The centre-point arc always ran counter-clockwise from its start; a
clockwise arc needed a typed negative sweep. The tool now tracks the
signed turn the cursor makes round the centre after the start is placed,
and its sign sets the direction of the preview, the live Sweep box and
the created arc.
sketch.arc.center_point takes `clockwise` with a clicked end: the arc is
stored counter-clockwise from the end and reversed, as a negative sweep
is, so the start keeps its radius and `<id>.start`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FN5eEMrqWWXqi65FcK8GXq
* Sketch: keep the old counter-clockwise centre-point arc behind a preference (#6645)
Preferences > Sketch gets "Center point arc follows the cursor's
direction" (center_arc_follows_cursor, on). Off, the arc runs
counter-clockwise from the start whichever way the cursor went, as it
always did. Its strings are a pending locale file (en, de).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FN5eEMrqWWXqi65FcK8GXq
* Sketch: Japanese and Chinese strings for the centre-point arc preference (#6645)
ja and zh are complete catalogs, so the new preference's label and tip
need them too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FN5eEMrqWWXqi65FcK8GXq
* Sketch: Arabic, Hebrew and Vietnamese strings for the centre-point arc preference (#6645)
Arabic, Hebrew and Vietnamese became complete catalogs on main, so the new
preference needs them too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: sascha2101 <221609842+sascha2101@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Russian: translate the Render workspace's 706 messages (batch 2)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Russian: the 27 Render messages main gained since (the Appearances panel)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A new command, sketch.spline.reverse, runs a spline the other way: its
point list is reversed in place, so its last point becomes its first and
the curve keeps its path (chord-length fits, uniform clamped knots and
closed fits read the same both ways). Points and constraints stay. A
projected spline and one an offset uses or makes are refused. The
sketch's right-click menu offers it for one selected spline.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8284
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Sketch on a face: a round's edges that end a hair apart still close (#8284)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Sketch on a face: test both ends of a rounded loft end to end (#8284)
A square lofted to a circle with its side edges rounded, as in the
report: a sketch on either end face takes the whole face. Without the
fix the circular end fails with "face projection has a branched
boundary". Also drops a redundant term from the join tolerance.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* claim: #8301
* Timeline: the feature menu's suppress item follows the reader's language (#8301)
Suppress Features / Unsuppress Features were raw literals. Menu::label()
translates a label only when a catalog entry carries it, and none did, so the
item stayed English in every language, the Japanese UI included.
The two labels are now the messages timeline.suppress_features and
timeline.unsuppress_features in a new assets/locales/pending file: the English
wording is unchanged, and the complete catalogs (ar, he, ja, vi, zh) plus de and
ko carry the translations.
cargo test --profile ci -p solidcraft-ui-egui --lib -- timeline::tests::the_feature_menu_suppress_item_follows_the_language
fails on the claim commit (the Japanese menu paints the English literal) and
passes with the change.
The Appearances panel's 27 messages for Dutch, Hungarian, Galician,
Malay and Norwegian Bokmål, which their merged Render batches missed,
and the shots strip's 7 newer messages for those and ten more.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Fix issue with settings window automatically scrolling to selected item, preventing scrolling by user
* Fix issue with settings window automatically scrolling to selected item, preventing scrolling by user
In the Sketch > Create drop-down a plain row such as Point was drawn
200 pt wide, the minimum width its labels fit in, while a family row such
as Slot filled the menu. The menu was as wide as the one-line pin hint in
its footer, so the plain rows' hover background and pin stopped short of
the right edge.
The Create menu now sets its width from its rows before drawing them, as
the other panel drop-downs do, and passes that width to the plain rows
instead of recomputing it over a subset. Family rows fill the same width
and the footer hint wraps inside it. The overflow menu's plain rows take
the width of all its commands in the same way. A family's submenu still
sizes its variants to their own labels.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Most browser menus show V beside Show/Hide, but the V key always ran
toggle_visibility, which acts on the selection. A right-click on a body or
sketch row also selects it, so the two agreed there; a right-click on the
Bodies, Sketches or Origin folder, a group, the component or an origin plane
does not, so V did nothing, or flipped a body selected earlier, and left the
menu open.
With a menu open, V now runs that menu's row whose shortcut is V, through
run_item as a click does, and closes the menu (context_menu::press_shortcut).
A disabled row takes the key and does nothing. With no menu open, or a menu
without such a row, V still acts on the selection (#4128, #4409: V stays
selection-based).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8329
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
* Save As offers the open file's own name (#8329)
Save As, Save As JSON and Save a Copy proposed the design's name, the one
stored inside the file. Copies of a file under other names keep the
stored name, so "Sample Plate-bug.solidcraft" was offered
"Sample Plate.sc", the same as its sibling, and one replaced the other.
Session::save_as_name() offers the stem of the open file unless the
design was renamed since it was opened or last saved, and the design's
name otherwise (a new design, or one renamed in the Browser).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
---------
Co-authored-by: Claude <noreply@anthropic.com>
Each cap is tangent to both concentric sides, so its radius is already
half the gap between them and the two caps are equal. The Equal the arc
slot added between them was always redundant; it is no longer added.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A button is 60 points tall and its label starts 32 points down, so two
lines of the label font (31 points) ran 3 points past it. Two-line
labels now take the font size plus 2 points per line and start higher
when they would still run past the button, leaving 2 points below.
One-line labels are unchanged.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8020
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* Insert Part: the Length list opens on the default length (#8020)
The list carried an item called "Default" above the standard lengths. It
never said which length it stood for, and one of the lengths below it
always was that length, so the list offered the same length twice under
two names. Change Part Size has always listed concrete lengths.
The item is gone and the list opens on the length the part would be given
anyway. The default cannot be worked out in the dialog, because it is not
one rule: a cap screw or bolt takes the first standard length at or above
2.5 d, a set screw the first at or above d, a dowel pin the first at or
above 4 d. parts.library now reports default_length beside each size's
table values, taken from the shape the engine would build, and the dialog
selects it; the test checks that report against what an insert without a
length is actually built to, for every size of every family.
Leaving the length alone behaves as "Default" did: a new size resolves
the list again, so M6 to M12 moves the selection from 20 to 30. A length
chosen by hand stays until the size changes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* Insert Part: the labels test skips default_length too
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #5638
* Sphere, Torus and Cone dialogs: place them by their centre or base (#5638)
The Box and Cylinder dialogs already had typed X, Y and Z placement
fields; the Sphere, Torus and Cone dialogs now do too. Sphere and Torus
show Placement: Center and take a picked point like the Box; Cone shows
Placement: Base Center like the Cylinder. The fields take expressions,
and Edit Feature shows and keeps the stored centre or base.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
With the dialog buttons at the bottom, the spinner shown while the preview
computes or OK applies was painted on its own after the footer: at the
card's left edge and one control height up from its bottom. The footer
insets its row by 12 pt at the sides and 10 pt above and below and centres
the buttons, so the spinner sat outside that inset and about 10 pt below
the buttons' centre line.
Panel::feature now draws the spinner through the footer's left slot, so it
shares the row's inset and vertical centre, in the space the footer already
leaves for it before the status text. The rect is published as
dialog:footer:spinner, and a panel test checks it lies in the footer row,
at its left inset and on the OK button's centre line. The spinner in the
title row (buttons at the top) is unchanged.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Italian: translate the 132 messages main gained since batch 1 (batch 3)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Italian: the Appearances panel's 27 Render messages
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Dutch: translate the 199 messages main gained since batch 1 (batch 3)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dutch: Spoed for a thread's pitch, as the catalog's Pitch (review)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Render inspector: selection-following appearance panel with the look chain, Applies to and edit controls
* Render appearance: Glass, Clear coat, Maps, Saved optics and Reflections sections
* Update Render navigation tests for dedicated editors
* Exercise Focus keyboard protection through the Library search field
* French: translate the 205 messages the catalog was missing
The French catalog lacked 205 of the English messages, so parts of
Preferences, the hole presets, the slicer messages, the Render
workspace and the Assistant showed in English. They are translated in
one pending file, with the catalog's terms (Esquisse, Fonction,
Bossage, Appui, Clip, Prise de vue) and its non-breaking space before
: ; ? and !.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Translate the 90 messages main added since (the navigation bar's)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A variable font (one file for every weight, as most web fonts ship) has no face marked bold,
so Bold failed with "has no bold face". Without a bold face, a face whose wght axis reaches past
semibold is now set to weight 700. ttf-parser gets its variable-fonts feature for that.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8155
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
* DXF import: an elliptical arc comes in as exact conic arcs (#8155)
A partial ELLIPSE (how Fusion, and SolidCraft's own DXF export, write an
elliptical arc) was read as a degree-3 spline fitted through 16 samples,
which strays from the ellipse between them: 0.84 mm on a 300-degree arc
of a 200 x 40 mm ellipse. It is now read as exact rational-quadratic
conic pieces of at most a quarter turn each, which the sketch keeps as
conics. A conic arc written by SolidCraft's DXF export now reads back as
the same conic.
The arc's sweep is taken with rem_euclid instead of a loop that added a
turn at a time, which ran for billions of turns on a start angle of 1e11.
sketch.drawing_bounds and the width/height sizing of sketch.insert_dxf
measure a conic by points along it, not by its apex, which can lie
outside the curve.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #8265
* Move/Copy: a triad drag ends where the button was released (#8265)
A frame carries all the input queued since the last one, so the release
that ends a drag and further pointer movement — the hand keeps moving as
the button goes up, or input is queued during a busy frame — arrive
together, and the frame's latest pointer position is already past the
release. The drag's final change was read from it, so the value, the
preview and the command both jumped to wherever the mouse had got to;
pressing Enter right after the release closed the window first, which is
why that worked around it. Rotate and occurrence moves share the triad.
The final change now comes from the release event's own position, which
the raw input carries (egui's processed pointer events drop it). The
regression test sends a release at 20 mm and a move to 30 mm in one frame:
30 mm before, 20 mm after.
Fixes#8265.