This CL replaces the post-hoc implicit flex correction (`flexInterp_cgsolve`) with a **linearly-implicit effective metric** `M̃ = M + (h² + h·damping)·K` carried by the CG constraint solver itself. Contact/friction forces and implicit flex elasticity are now computed against one consistent metric, instead of the solver seeing `M` and a post-solve correction changing `qacc` behind its back.
Gate (unchanged semantics): `solver="CG"` + implicit/implicitfast integrator + pyramidal cones + flex stiffness present. Newton and PGS are untouched. `solver="CG"` remains the user-facing contract — the factorization is an implementation detail of the preconditioner.
### What's in the metric
- **mjData `efm_*`** (arena, efc-like lifetime/skip semantics; built in `mj_fwdPosition`, value-refreshed in `mj_fwdVelocity`): the per-step stiffness CSR `efm_B_*`, its reverse-Cholesky factor `efm_dofid` + `efm_L_*` (nested-dissection ordered, separators-first for the reverse factorization), and the smooth-force shift `efm_c = h·K·qvel`.
- **`mjd_flexStiff_assemble`** now assembles stretch (Gauss–Newton), standard dim-2 bending, and — via the cached corotated stiffness `d->flexelem_krot` — interp stiffness (all node bodies on simple sliders: point Jacobian is I₃, `flex_centered` not required; fixed nodes drop like pins) into one dof-level CSR. `mjd_effMulAdd`/`mjd_effSolve` apply the metric, with matrix-free operator fallbacks where assembly does not apply.
- **mjModel `efm0_*`** (`nefm0dof`/`nefm0L`): the constant part of the metric factor — currently the dim-2 bending factor, computed once in `mj_setConst` — so bending-only models pay zero per-step factorization cost. Naming mirrors mjData's `efm_*` with the standard `0`-suffix (reference/constant) idiom, and is deliberately not bending-specific: future constant contributors extend it without renames.
- The solver consumes the metric through pre-shifted `qfrc_smooth` and the metric products `Ma`/`Mv`/`Mgrad`; `qacc_smooth` becomes the unconstrained minimizer of the implicit dynamics, which makes the no-constraint shortcut and the warmstart choice consistent by construction.
- **`mj_inverse` adds `B·qacc − c`**, making inverse dynamics discrete-consistent with the gated forward dynamics — exact, since the gated path has no qDeriv term (new test `ForwardTest.GatedFlexInverseConsistency`).
### Performance
All numbers: ms/step over the same 2000-step window, models as shipped on each side (old code with the old model settings vs this CL with the new ones).
The new solver path activates on exactly two shipped models — the ponchos, the only flex models that need an implicit integrator (poncho on Euler degenerates to >200 ms/step). For them, this CL trades speed for consistency: the implicit bending solve now runs inside every solver iteration, where the contact solve can see the stiffness, instead of once after the solve. Solver iterations drop because the curvature is visible, but each iteration pays for the implicit solve:
| model | before | after | solver iters/step |
|---|---|---|---|
| poncho | 2.47 | 3.30 (1.33×) | 16.8 → 11.8 |
| poncho_edgeequality | 1.96 | 2.72 (1.39×) | 13.2 → 10.0 |
What that price buys: contact forces consistent with the implicit elasticity (previously the post-hoc correction changed `qacc` after the constraint solve), discrete-consistent inverse dynamics, and the removal of the post-hoc special case from the integration path. Raising poncho's timestep from 2 to 5 ms leaves its per-step cost nearly flat, so the consistency price can be recovered by taking fewer steps where accuracy allows.
Every other flex model was measured stable on Euler at its shipped timestep and switches to it (these models predate the post-hoc integrator; implicit was never load-bearing for them). They end up equal or faster than before: bunny_multicell 0.47 → 0.40, trampoline 0.28 → 0.25, plate 1.02 → 0.99, pancake 0.34 → 0.33.
Finally, the per-step factorization makes configurations practical that the old code could only integrate explicitly: implicit stretch elasticity (`elastic2d="stretch"`/`"both"`, dim-3 solids) and factorized interp stiffness. No before/after exists for these — stock has no implicit treatment of stretch at all.
### Behavior changes
- With the post-hoc correction deleted, interp/bending models running `solver="Newton"` (or elliptic cones, or islands) now integrate flex elasticity **explicitly** (previously: post-hoc implicit). Affects e.g. `gripper_trilinear` (stable, and faster, but different semantics). Follow-up options: Newton-side metric support, or a documented fallback.
- With the gate on, `mj_forward` outputs are timestep-dependent for gated models (they answer the linearly-implicit discrete problem); `qacc_smooth` and `mj_inverse` change accordingly. Non-gated models are bit-identical (full suite green throughout).
### Validation
- 1737/1737 tests, including new: `FlexStretchDerivatives` (FD-validated GN operator), `FlexStiffAssemble`/`FlexStiffAssembleInterp` (CSR ≡ operators), `GatedFlexInverseConsistency` (fails pre-change), equivalence tests vs the old post-hoc treatment (bending matches to 2e-11).
- Fingerprint discipline throughout: bending-only models bit-exact across every refactor; permutation/kernel changes verified iteration-identical.
### Known follow-ups (not in this CL)
3×3-block sparse Cholesky kernel (the numeric factorization is index-bound; projected ~3× on the factor); mjModel persistence of the factor's symbolic pattern (rest-pose ND makes sizes compile-time); the general effective-metric mode (all solvers, all PSD-safe force classes, behind an enable flag).
PiperOrigin-RevId: 948561856
Change-Id: I8b8e32ebd0428042af71647d0470d10773bf6daf
An actuator now owns a block of consecutive controls
(actuator_ctrladr/ctrlnum, width defined by the actuator type) and a block
of consecutive force outputs (actuator_outadr/outnum, width defined by the
transmission type). Force outputs are the scalars of actuation space: one
force, length, velocity and moment row each. nout = dim(actuator_force) is
derived from transmission types; all current types have width 1, so all
three counts coincide for every existing model and behavior is bit-exact.
Array re-keying: ctrlrange/ctrllimited by nu; forcerange/forcelimited/gear/
acc0/length0/lengthrange and the moment row structure by nout; everything
else per actuator. The mjModel actuator block is re-sorted by size key.
Layout-breaking, not behavior-breaking: saved .mjb files are invalidated
(size list changed) and recompilation is required.
PiperOrigin-RevId: 948351772
Change-Id: Icbc196ffa083cb1eaa6f1a3710869c89d8f62540
The mid-phase BVH descent filter prunes body pairs using body_margin,
which was compiled as the max over geom margins, excluding gap. Broadphase
and the leaf-level test both use margin+gap, so any multi-geom body relying
on gap could silently lose its in-gap contacts when raw AABBs don't
overlap. Single-geom bodies take the leaf-leaf path and were unaffected.
PiperOrigin-RevId: 946967548
Change-Id: I6d92baa296f1a83be68b4dbfd64a96d1c7efd3c4
Extend mjpResourceProvider with an optional write callback (write)
so that mj_encode, mj_saveXML, and mj_saveModel can write to any
registered provider.
PiperOrigin-RevId: 945202741
Change-Id: I37903425260932e555f4a8c2392c4ff8c2e6cc06
For example when loading parent_merge.xml:
```
WARNING: Attach conflict when attaching 'child' to 'parent_merge', policy is 'merge'
timestep: parent has 0.005, child has 0.002, taking the minimum
iterations: parent has 50, child has 100, taking the maximum
flag 'Damper': added from child
```
When loading parent_error.xml:
```
XML Error: Attach conflict when attaching 'child' to 'parent_error', policy is 'error'
timestep: parent has 0.005, child has 0.002
iterations: parent has 50, child has 100
Element 'attach', line 10
```
PiperOrigin-RevId: 933620810
Change-Id: Ib477863b5ef763474d27fb4be5a4148be1d5d500
Compiler warnings are now accumulated in a vector of strings within the mjSpec object. New API functions `mjs_numWarnings` and `mjs_getWarning` are added to access these warnings. The compiler's log handler now chains warnings to the global log handler, ensuring they are still displayed immediately. Call sites in `mj_loadXML`, `mj_compile`, and the Python and WASM bindings have been updated to use the new warning API.
PiperOrigin-RevId: 933361650
Change-Id: I47cab98a460c57b0898c0a1a43fce2a5b9648eb1
When an mjpResourceProvider's open callback returns 0 (failure), MuJoCo does
not invoke the corresponding close callback. Previously, several resource
provider implementations allocated heap memory or system file handles before
encountering an error, failing to clean them up before returning 0. This change addresses these leaks across the codebase and clarifies the API contract.
PiperOrigin-RevId: 929803942
Change-Id: Ib7344033726895cdf037a8d9356ffc183c78c2d3
The field now stores either an approximate or exact diagonal of the constraint matrix A, so the name is made more general.
PiperOrigin-RevId: 924244954
Change-Id: I62b2f76531fb88b7b3bf96e6769940197596702b
For example, `compile mujoco_menagerie/robotis_op3/scene.xml` now outputs
```
Compile 1 (cold cache):
total: 317.2 ms
assets: 284.8 ms (wall clock)
load: 616.1 ms
hull: 26.4 ms
poly: 137.8 ms
inert: 177.8 ms
bvh: 568.2 ms
octr: 1.6 ms
tex: 25.3 ms
other: 32.4 ms
Compile 2 (warm cache):
total: 79.9 ms
assets: 54.5 ms (wall clock)
load: 888.5 ms
hull: 0.0 ms
poly: 0.0 ms
inert: 0.0 ms
bvh: 0.0 ms
octr: 0.0 ms
tex: 21.4 ms
other: 25.3 ms
```
PiperOrigin-RevId: 917850214
Change-Id: Iaec86230bec0faf2e47820e20cbff61de5b2621e
with a preconditioned Conjugate Gradient (CG) solver that operates
on the full system matrix.
The previous approach extracted flex DOFs into a reduced banded system,
factored it separately, and overwrote the global solve. This required
precomputed bandwidth (makeFlexBandwidth), parent-joint detection,
coupling corrections, and a FlexInterpContext struct — and only worked
for standalone flex trees without parent joints.
The new CG solver uses the already-factored global system (M - h*qDeriv)
as a preconditioner and adds the flex stiffness contribution via
matrix-free products (mjd_flexInterp_mulKD/mulK). This handles any
kinematic configuration — including flexes attached to articulated
chains or with parent joints — without sparsity pattern restrictions.
Before (`bunny_multicell`):
```
Simulation time : 50.80 s
Steps per second : 197
Realtime factor : 0.20 x
Time per step : 5080.3 µs
CG iters / step : 3.16
Contacts / step : 31.04
Constraints / step : 124.15
Degrees of freedom : 178
Dynamic memory usage : 0.4% of 100M
```
After:
```
Simulation time : 9.52 s
Steps per second : 1051
Realtime factor : 1.05 x
Time per step : 951.7 µs
CG iters / step : 3.21
Contacts / step : 30.90
Constraints / step : 123.61
Degrees of freedom : 178
Dynamic memory usage : 0.3% of 100M
```
PiperOrigin-RevId: 913758038
Change-Id: If5aa617b2d535c86aec9bd71c9e0003a2b38bdd7
Alessio Quaglino